mirror of
https://github.com/seaweedfs/seaweedfs.git
synced 2026-09-08 15:41:15 +02:00
7620e961712b0b61b92633c8cd5cda0f2cc34c40
103
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
7620e96171 |
expose whether a volume replica is backed by remote storage, and prefer local replicas (#11105)
* expose whether a volume replica is backed by remote storage
Volume locations returned by lookups do not indicate whether a replica
has been tiered to remote storage. Readers cannot distinguish a local
replica from a remote-backed one, so they may hit a remote-backed
replica first even when a local replica is available.
Add DataInRemote to the lookup location message, populate it from the
master's volume info, and carry it through the wdclient vid map so
clients can prefer local replicas when resolving chunk locations.
* wdclient: prefer local volume replicas over remote-tier replicas on lookup
LookupFileIdWithFallback (and the publicUrl variant in FilerClient)
didn't honor the DataInRemote flag when shuffling URLs, so the
DataInRemote patch only took effect in LookupVolumeServerUrl. Apply
the same ReorderToFront(localUrls) to sameDcUrls/otherDcUrls so
non-remote replicas stay at the front, matching the existing vidMap
convention.
* wdclient: propagate DataInRemote across tier transitions on existing replicas
When a volume is tiered to remote storage or a remote-backed replica is
restored locally, the cached DataInRemote on the same volume-server URL
stayed at its old value because two pieces of state never updated:
* master_grpc_server.go only split newVolumes and (already-tracked) volumes
into NewVids vs RemoteVids. ChangedVolumes went straight to NewVids, so
the broadcast announced the re-classified volume as a fresh arrival and
the client had no way to tell whether its existing cache was stale.
* vid_map.addLocationToMap early-returned when an entry already had the
same URL. A tier transition reports the same URL with DataInRemote
flipped, so the cached entry stayed at the old classification.
Wire both sides together: ChangedVolumes now go through the same IsRemote
split as newVolumes, and addLocationToMap replaces the existing entry in
place when the URL matches but DataInRemote has changed. The server
reference key only depends on URL/grpc port, so the refcount does not
move across the flip.
Adds vid_map_remote_transition_test.go covering the local->remote and
remote->local paths so the in-place update and the cache-key stability
are pinned by tests.
* wdclient: prefer local replicas across data-center boundaries
The previous local-first ordering hoisted local URLs to the front of each
data-center bucket separately, then concatenated same-DC before other-DC.
That meant a same-DC remote replica could still be tried before an
other-DC local replica even though the local one would answer cheaply.
Reorder once across the full candidate list: concatenate same-DC and
other-DC first, then ReorderToFront pulls every local replica to the very
front while preserving the DC preference inside each tier. Apply the same
ordering in all four lookup paths so the cached vidMap, the
LookupFileIdWithFallback provider path, FilerClient.GetLookupFileIdFunction
(PublicUrl-preferred variant), and the deprecated filer.LookupFn all agree:
- weed/wdclient/vid_map.go (LookupVolumeServerUrl)
- weed/wdclient/vidmap_client.go (LookupFileIdWithFallback)
- weed/wdclient/filer_client.go (LookupFileId)
- weed/filer/reader_at.go (LookupFn)
Strengthen the existing local-first tests: vidmap_client_localfirst_test
now asserts both endpoints are present (not just the local one is first),
and slice_test asserts an exact match instead of accepting two orderings.
Add TestLookupFileIdWithFallbackGlobalLocalFirst to pin the cross-DC
ordering invariant: any local replica (same or other DC) precedes every
remote-tier replica; within each tier DC1 precedes DC2.
Add docstrings to ToVolumeLocations, ReorderToFront, LookupVolumeServerUrl,
LookupFileId, GetVidLocations, GetLocations, LookupFileIdWithFallback, and
updateVidMap so the touched lookup paths are described in one place.
* topology: broadcast tier transitions on existing replicas
When a volume replica is tiered to remote storage or restored locally, the
wdclient's cached DataInRemote went stale: every connected client kept
preferring a remote-backed replica over a freshly restored local one, or
demoted a freshly tiered remote replica. The fix in commit
|
||
|
Chris Lu
|
5f787a25c3 |
master: survive a volume layout deleted twice (#11098)
* master: survive a layout deleted twice Two volume servers dropping the last replica of volumes that share a layout both find it empty and both delete it. The loser's lookup misses, and the single-value type assertion on the result crashed the master before the caller could look at the found flag. Claude-Session: https://claude.ai/code/session_01WmX6Rchx298NQksHDXg7sk * master: remove a layout and read it back in one step DeleteVolumeLayout looked the layout up and then deleted it, so two deleters could each release the lookup ownership of the same layout, or one could find nothing to release at all. Have the map hand back what it removed. Claude-Session: https://claude.ai/code/session_01WmX6Rchx298NQksHDXg7sk |
||
|
Chris Lu
|
a02c0024e5 |
master: cap the reported capacity at what the disks hold (#10960)
* master: cap the reported capacity at what the disks hold Statistics reported max volume count times the volume size limit, which is how many volumes the cluster is allowed to place, not how much space it has. A cluster given far more slots than its disks can fill reported a capacity it could never reach -- 65536 slots at 30GB read as 1.9PB on a 460GB disk -- and the number never moved, since writing data changes neither the slot count nor the size limit. The volume servers already report each filesystem's total and free bytes in their heartbeats, so bound the answer by what they say is left. * mount: keep the last known sizes when filer statistics fails A failed Statistics call returned before df's answer was filled in, so a mount whose filer or master was briefly unreachable reported an empty filesystem rather than the sizes it already had. * master: drop the disk ceiling when a volume server does not report A cluster part way through an upgrade has volume servers that predate the disk bytes in the heartbeat. Summing only the ones that answered left the quiet server's free space out of the total, and the server holding the room is exactly the one that could make the cluster read as full. Answer with the disks only when every one of them reported. |
||
|
Chris Lu
|
b77431c142 |
master: stop hintless small-file assigns from marking volumes full (#10944)
* master: estimate a hintless assign's size from the volume's average file size An assign that carries no dataSize hint charged a flat 1MB per file id against the volume's effective size. A small-file workload overpays by orders of magnitude: bulk-writing 4KB files marks volumes holding a few hundred MB of real data as crowded and then full, so the master grows unnecessary volumes and, once every volume is spuriously full, fails all assigns. Estimate from the volume's own average file size instead, and keep the 1MB fallback only for volumes with no history. * master: decay pending assign sizes for volumes gone quiet The decay that corrects pending assign estimates runs only when a heartbeat reports the volume, and a heartbeat only reports a volume whose content changed. A volume held out of the writable list takes no writes, so once inflated estimates mark every volume full, nothing is ever reported again, nothing decays, and the cluster refuses all writes until a restart. Run the decay from the master's periodic loop for volumes no heartbeat has reported within two pulses, feeding the last reported size back through the same path an unchanged heartbeat would take. * master: trim the comments on the assign size estimate * master: keep the periodic decay out of the replica-dedup window UpdateVolumeSize ignores a report arriving within two seconds of the last one, so replicas of the same volume do not each halve the pending estimate. The periodic decay went through the same path and stamped that window, so a real heartbeat landing right behind it was dropped along with its reported size and compact revision. Only a volume whose content changed is reported at all, so nothing would send that size again and the master kept a stale one. Let the dedup window belong to volume server reports alone. * master: let the decay read the size record under the lock it mutates The periodic decay picked its volumes under a read lock and replayed them under a write one, carrying the size it had read across the gap. A heartbeat landing in between was rolled back: the replay wrote the older size and compact revision over the fresh ones, and a compaction report lost that way is never resent, since only a volume whose content changed is reported. The decay has no size of its own to contribute, so it now reads the record under the same lock it mutates. * master: let a heartbeat that beat the decay stand for the cycle The decay chooses its volumes under a read lock and applies them under a write one. A heartbeat landing in that gap already did the halving the cycle owed, so applying the decay on top of it halved twice and forgot pending bytes the volume has not written yet - the double-halving the replica-dedup window exists to prevent. Both callers now give way to a report already handled for this cycle; only a real report still advances lastUpdateTime, so a quiet volume keeps decaying every pulse. * master: keep genuinely full volumes out of the decay pass A volume the disk really did fill keeps its fullSince set for good, so it was selected every pulse for a decay that cannot help it: UpdateVolumeSize refuses to recover a volume whose reported size is at the limit, and replaying a size that cannot move leaves the record as it found it. Full and quiet is the ordinary resting state of a cluster, so this was most of the pass, taking the layout write lock away from the heartbeats to do nothing. On a million tracked volumes with a hundredth of them phantom-full it costs ten thousand write locks a pulse instead of a million. * master: put the stale-replay test back on the path it guards Giving the decay the dedup window left this test short-circuiting there, so it no longer reached the locked read it was written for and passed with that read removed. Age the record past the window, which is the only case where reading it under the lock is what saves the report. |
||
|
Chris Lu
|
35d53a20f6 |
master: let the leader admit a master that starts with no raft state (#10865)
* master: answer with the leader raft already knows Topo.Leader() backs off for up to 20 seconds waiting for an election. Callers that a health probe or a client is blocked on cannot afford that: /cluster/status, /cluster/healthz and /readyz all sit past the probe timeout of both the helm chart and the operator, so a master that is still joining looks dead rather than joining, and the kubelet restarts it. informNewLeader and SendHeartbeat hold the client on a master that cannot serve it, exactly when it should move on to find the one that can. Answer these from MaybeLeader instead, which reports what raft knows right now. MaybeLeader takes over the "am I the leader myself" fallback that Leader() used to apply on top of it, so one non-blocking call is still correct; Leader() keeps the backoff for callers that must wait. * master: let the leader admit a master that starts with no raft state Neither raft implementation lets a server outside the configuration campaign: goraft's promotable() requires a non-empty log, and hashicorp rejects vote requests from a candidate that is not in its configuration. A master that comes up with fresh state therefore cannot elect itself in — the leader has to pull it in. Nothing did. The peer list is static, rendered from the replica count, so scaling it up leaves the sitting leader running the old list with no idea the new masters exist. Under goraft they wait forever. Under hashicorp they are worse off: each bootstraps a cluster of its own from the new list, and two of them form a quorum next to the live leader, with their own TopologyId. That is the split brain SetTopologyId kills a master over. Admit the peer where it registers instead. Only the leader gets past the IsLeader check in KeepConnected, and a joining master's client lands there, so that is the moment it joins. The broadcast OnPeerUpdate rides on is not enough on its own: it only reaches masters already connected, which is why a leader that came up first missed both newcomers. RaftAddServer grew a goraft branch on the way, so cluster.raft.add stops silently doing nothing on the default raft, and RaftRemoveServer with it. Bootstrapping is now one call for both implementations, made only after the peers confirm nobody has a leader, and retried until this master is in rather than checked once and dropped. * master: do not evict a peer that is still in -peers The hashicorp leader drops a master from the raft configuration as soon as it stops answering pings. A master that is merely restarting answers nothing, so an ordinary bounce shrinks the quorum behind the operator's back — and then races its own return: the master comes back, registers, gets re-admitted, and the eviction lands after it. A randomized start/stop walk lands on it. Two of three masters running, the leader evicts the one that just went down, the restart re-adds it, the removal commits late and takes the leader's own leadership with it. What is left is a two-server configuration whose other half is down, and a running master that nobody will ask for a vote — no quorum, no way back until the third master returns. -peers is what declares membership. updatePeers already reconciles the configuration against it on every leadership change, and an operator who really means to drop a master can say so with cluster.raft.remove, so keep the eviction for masters that are no longer listed at all. * test: bounce masters at random and hold the election to it Twelve rounds of stopping or starting a random master, on both raft implementations, checking the two things an election must never get wrong: two masters claiming leadership at once, and a quorum that comes back without agreeing on one. The cluster's identity has to survive the whole walk, since a master that re-mints a TopologyId is the split brain SetTopologyId kills its peers over. The seed is random and logged, so a failure names the walk that reproduces it. Below a quorum the walk moves straight on. A master that has lost its quorum cannot commit anything, and goraft only checks whether it still has one on an election-timeout ticker, after its peers have been quiet for a full timeout — measured taking over 30 seconds to step down. That direction belongs to TestTwoMastersDownAndRestart, which was giving it ten seconds and would have started failing on a slower machine; it now waits on that behaviour explicitly rather than sleeping twice and hoping. WaitForTopologyId returns the id it waited for. Reading it separately raced the leader applying the raft entry that carries it, which shows up as an empty id right after an election rather than as a wrong one. |
||
|
|
f7c4636d22 |
topology: refresh oversized mark on every heartbeat (#10829)
* topology: refresh oversized mark on every heartbeat The oversized flag on a volume location was only set when the volume was registered (RegisterVolume). A volume that later grew past the size limit kept its stale "not oversized" mark, so the heartbeat path (ensureCorrectWritables) kept re-adding it to the writable list while RecordAssign removed it on every assign - a writable/unwritable flip loop that let writes continue past the limit and made vacuum race in-flight writes. Refresh the mark from each heartbeat's reported size in both heartbeat paths (ApplyVolumeChanges and SyncDataNodeRegistration), mirroring what RegisterVolume already did at registration time. A volume that grew past the limit now stays unwritable, and one that shrank back clears the mark and can recover. * topology: order heartbeat writable correction after decay and honor cooldown Review feedback (Greptile, CodeRabbit) on the oversized-mark refresh: 1. Greptile: clearing the oversized mark before EnsureCorrectWritables let the delay-unaware helper re-add a just-compacted volume to writables, bypassing capacityRecoveryDelay. ensureCorrectWritables now checks fullSince and skips the re-add while the cooldown is pending, so a volume removed for capacity only recovers through UpdateVolumeSize's heartbeat recovery path. 2. CodeRabbit: in the full-heartbeat path the mark was refreshed after the writable correction, so a newly oversized volume stayed writable for an extra heartbeat cycle. The standalone changedVolumes loop is merged into the volumeInfos loop and EnsureCorrectWritables now runs after UpdateOversizedState + UpdateVolumeSize in both heartbeat paths, using the freshly refreshed mark. 3. TestHandlingVolumeServerHeartbeat used a size (254320) that is past the test's volumeSizeLimit (32768); it only passed because the stale mark hid the oversized state. Sized down to 30000 to keep testing the add/remove flow, and added TestEnsureCorrectWritablesHonorsRecoveryCooldown covering the cooldown window and the recovery after it. * topology: do not restore a still-crowded volume after the cooldown Greptile review: after capacityRecoveryDelay elapses, ensureCorrectWritables could restore a volume whose effective size is still past the crowded threshold. UpdateVolumeSize refuses the recovery (effectiveSize > crowded threshold -> setVolumeCrowded + return false), but the cooldown check in ensureCorrectWritables only looked at fullSince, so once the delay passed it re-added the volume even though capacity tracking still considers it crowded. Check the crowded mark before re-adding: a volume UpdateVolumeSize just marked crowded must not be restored here, otherwise assignments resume while the volume is still flagged for growth. Adds TestEnsureCorrectWritablesDoesNotRestoreCrowdedVolume: effectiveSize decays to 10500 (past the 9000 crowded threshold) after a report of 8000, and ensureCorrectWritables keeps the volume unwritable past the cooldown. * ci: trigger re-run of flaky FUSE jobs * topology: gate the writable restore on the limit, not on crowded A crowded volume is above the growth threshold, not full, and is normally writable. Refusing to restore one locks it out for good: nothing writes to a volume that is not writable, so its size can never fall back under the threshold. Gate on the same size the assign path uses to remove it. * topology: let only the heartbeat refresh set the oversized mark Registration also set it, from whatever VolumeInfo it was handed. The incremental path builds that from a short heartbeat message, which carries no size, so every arrival announcement cleared the mark and handed the volume back to the writable list until the next full report. * topology: use the re-resolved layout after a dropped one is replaced A layout dropped with its collection makes RegisterVolume refuse, and the full heartbeat then re-registered against a fresh layout but kept applying the size, oversized and writable updates to the dropped one. --------- Co-authored-by: hzsunchao <hzsunchao@corp.netease.com> Co-authored-by: Chris Lu <chris.lu@gmail.com> |
||
|
Chris Lu
|
3911e4c548 | master: keep a racing registration out of a dying collection (#10677) | ||
|
Chris Lu
|
a2ffc7aadf |
heartbeat: keep the master current through collection churn (#10657)
* heartbeat: name departed volumes in delta heartbeats * master: release the lookup index with a deleted collection * master: keep a fresh grow safe from the report that raced it * volume: name the volumes a deleted collection took with it Deleting a collection left the master to work out what went by omission from the next full volume list, which it no longer gets: heartbeats carry the whole list only when the master asks for it. The volumes a bucket's churn creates and destroys between two of those requests are never named in either direction, so the master keeps counting their slots as occupied and a cluster that creates and drops collections quickly runs its free-slot accounting dry -- assigns fail with no free volumes left while the disk holds a handful of volumes. The destroy path already knows exactly which volumes it removed, so send them down the same channel every other deletion uses. * rust: name the volumes a deleted collection took with it Mirrors the Go volume server. The notify path derives its deltas by diffing snapshots, so a collection delete that does not wake it is invisible until the master next asks for the whole list. |
||
|
Chris Lu
|
ce7d388639 |
heartbeat: send only the volumes that changed (#10640)
* pb: let a heartbeat carry only the volumes that changed A partial list cannot travel in volumes: a master that did not understand it would read the absences as deletions. So changes get their own field, used only once the master has said it compares digests and can tell when it has fallen behind. * master: apply the volumes a heartbeat reports as changed Only the named volumes are touched. A full report says the server holds exactly these; a changed report says nothing about the ones it leaves out, so absence must not read as removal. Also advertises that the master compares digests, which is what lets a server stop sending its whole list. Advertising it once per connection means a server reconnecting to a master that does not is back to full lists straight away. * volume: send only the volumes that changed once the master accepts them The whole list goes on every heartbeat until the master says it compares digests, and again whenever it asks, so a master that cannot tell when it has fallen behind never has to. has_no_volumes stays derived from a full list alone. Deriving it from what a heartbeat happens to carry would make a quiet one read as a server that had lost every volume, and the master would drop them all. The digest still covers every volume held rather than the ones sent, which is what lets the master confirm that applying the changes left it current. Reporting state is per-connection: a server that reconnects, or reaches a different master, starts again from the full list. * volume: let the zero reporting state stand for having told no master anything A Store built as a literal, which tests do, left the reporting state nil and panicked on the first heartbeat. As a value its zero form already means nothing has been reported to anyone, which is exactly the state that sends the whole list. * rust: send only the volumes that changed once the master accepts them Mirrors the Go volume server, with one hazard the Go side does not have: mount and unmount deltas here are derived by diffing successive heartbeats, so a heartbeat that carries a partial list would report every volume it left out as unmounted. Collecting now returns the full set alongside the message, and every site that diffs uses that rather than what went on the wire. * volume: do not let a full-list request be lost to the heartbeat it raced The request arrived while a heartbeat was already being built as a delta, and committing that heartbeat cleared it, so the master waited for another digest mismatch before asking again. Count the requests and clear only the one the heartbeat answered. * rust: stop marking volumes reported by a heartbeat that is thrown away The state-notify path collected a heartbeat only to diff its volume list, then sent a delta message of its own and dropped the one it had collected. Once collecting recorded what the master had been told, every mount or unmount silently marked the changed volumes as sent, and the master learned of them only after a digest mismatch. Snapshotting no longer records anything, and no longer expires ec volumes whose deletion that path was already discarding. * master: announce only the volumes a change actually brought Every changed volume was broadcast as a new location. Volumes grow constantly and growth moves no location, so on a busy cluster that told every connected client about volumes it could already reach, filling bounded broadcast queues and pushing out the topology updates that matter. * master: ask for the full list when only one can repair the master Delta heartbeats stop the full report, and with it the only thing that re-registers a volume the lookup index lost. The volume server cannot see that divergence and its digest cannot show it, so the master now checks its own two indexes agree and asks for the list when they do not. A node reporting one volume id twice is kept on full lists for the same reason rather than merely skipped: its digest can never be verified, so nothing else would tell the master what it had stopped holding. * master: keep the volume options on every heartbeat response A volume server takes them from whatever response arrives, and preallocate is a bare bool with no way to tell off from unmentioned. A response sent to ask for the volume list therefore turned preallocation off until the server reconnected. Responses sent mid-stream now start from the configured options rather than being built field by field. * master: announce a volume the lookup index had lost Repairing the index makes the volume servable again, but clients were told it went when the node dropped out and nothing told them otherwise: the disk map still held it, so it did not count as an arrival. Reaching the lookup index is what makes a volume servable, so recovering an entry there is an arrival as far as clients are concerned, on both the full report and the changed-volume path. |
||
|
Chris Lu
|
3fce1a938d |
perf(weed/topology): preallocate the heartbeat volume conversion slice (#10607)
* test(weed/topology): benchmark the per-heartbeat volume sync A volume server re-sends its entire volume list every VolumePulsePeriod, so SyncDataNodeRegistration is the master's steady-state per-server cost. Give it a benchmark so allocation regressions show up. * perf(weed/topology): preallocate the heartbeat volume conversion slice The slice grows to one entry per volume on the data node, so at 100k volumes the doubling copies allocate 60MB of garbage per heartbeat. The final length is known up front. BenchmarkSyncDataNodeRegistration/100000Volumes 199670102 B/op -> 137725872 B/op |
||
|
Chris Lu
|
fee3fcb55a |
mount: report data sizes to df with -df.logical (#10459)
df on a mount shows the space the cluster gives up to the data: every replica of a regular volume, every shard of an ec one. That is the honest answer for capacity planning, but it is not the question a user asks when they want to know how much of their data is stored. Add -df.logical. The master reports the logical sizes alongside the raw ones: one replica per regular volume, the data shards of each ec volume counted once. Free space is divided by the copies the requested replication makes, so used plus available stays the amount of data the mount can still write, and it comes off the cluster-wide usage rather than one collection's, since capacity is cluster-wide too. Statistics through a filer resolves an unset replication to the filer's default rather than the master's, matching where the writes it is sizing for actually land. The flag governs the quota check too, so a mount has one notion of how much it is using. A filer that predates the new fields sends zeros, and the mount keeps reporting the raw sizes. |
||
|
Chris Lu
|
152f1a2096 |
master: count EC volumes in statistics used size (#10457)
Statistics aggregates the volume layouts of a collection, but EC volumes are tracked outside collectionMap, so they were reported as nothing. A mount over a cluster whose volumes have mostly been encoded showed a df used size of a few GiB against terabytes of EC data. Walk the data nodes and add the EC volumes of the requested collection. Every shard copy counts, parity included, the way a regular volume's used size counts every replica, so used size stays the space the cluster actually occupies. File count comes from the volume-wide .ecx and .ecj counts, taking the largest a holder reports rather than summing them: both files travel with the shards on a move, so several nodes can report the same tombstones. |
||
|
Chris Lu
|
19dc085e33 |
master: statistics used size covers all collections and layouts (#10319)
StatFs on a mount reported cluster-wide total capacity but used size from a single volume layout keyed by collection, replication, ttl, and disk type. A mount without -collection therefore showed only the default collection's usage, hiding data in named collections, and even a collection-scoped mount missed volumes with a different replication, ttl, or disk type. Aggregate used size and file count across all layouts of the requested collection, and across every collection when the collection is empty, matching how Topology.Lookup treats an empty collection. Looking up stats no longer creates a phantom collection as a side effect. |
||
|
Chris Lu
|
0f1e50f9ec |
fix(master): re-register volumes missing from the lookup index
A disconnect/reconnect race could drop a volume from vid2location while it stayed in the data node's disk map, so it showed in volume.list and the admin UI but LookupVolume returned "volume id not found" and never self-healed (the full heartbeat only registered volumes new to the disk map). The full heartbeat now re-registers any reported volume missing from the lookup index, reusing the already-resolved VolumeLayout. |
||
|
Chris Lu
|
10cc06333b |
cluster: restrict Ping RPC to known peers of the requested type (#9445)
Ping previously dialled whatever host:port the caller asked for. Gate each server's Ping handler on cluster membership: masters check the topology, registered cluster nodes, and configured master peers; volume servers only accept their seed/current masters; filers accept tracked peer filers, the master-learned volume server set, and configured masters. Use address-indexed peer lookups to keep Ping target validation O(1): - topology maintains a pb.ServerAddress -> *DataNode index alongside the dc/rack/node tree, kept in sync from doLinkChildNode and UnlinkChildNode plus the ip/port-rewrite branch in GetOrCreateDataNode. GetTopology now returns nil on a detached subtree instead of panicking, so the linkage hooks can no-op safely. - vid_map tracks a refcount per volume-server address so hasVolumeServer answers without scanning every vid location. The add path skips empty-address entries the same way the delete path already does, so a zero-value Location cannot leak a permanent serverRefCount[""] bucket. - masters reuse a cached master-address set from MasterClient instead of walking the configured peer slice on every request. - volume servers compare against a pre-built seed-master set and protect currentMaster reads/writes with an RWMutex, fixing the data race with the heartbeat goroutine. The seed slice is copied on construction so external mutation cannot desync it from the frozen lookup set. - cluster.check drops the direct volume-to-volume sweep; volume servers no longer carry a peer-volume list, and the note next to the dropped probe is reworded to make clear that direct volume-to-volume reachability is intentionally not validated by this command. Update the volume-server integration tests that drove Ping through the new admission gate: success-path coverage now targets the master peer (the only type a volume server tracks), and the unknown/unreachable path asserts the InvalidArgument the gate now returns instead of the old downstream dial error. Mirror the same admission gate in the Rust volume server crate: a seed-master HashSet built once at startup plus a tokio RwLock over the heartbeat-tracked current master, both consulted in is_known_ping_target on every Ping, with InvalidArgument returned for any target that isn't a recognised master. |
||
|
Chris Lu
|
ecc0390795 |
fix(master): eagerly remove volume from writable when assign hits limit (#9108)
* fix(master): eagerly remove volume from writable when RecordAssign hits limit
Previously, a volume was only removed from the writable list by the
heartbeat-driven CollectDeadNodeAndFullVolumes pass, which runs every
pulse (5s) after a 5s heartbeat. Under sustained concurrent writes,
fio-style workloads observed in the field grew volumes 8-20x past the
configured 100MB limit (median 530MB, peak 1.98GB) during that
5-15s detection window.
RecordAssign already tracks effective size (reported + pending) on each
/dir/assign. It now also removes the volume from writable the moment
effectiveSize reaches volumeSizeLimit, and mirrors the activeVolumeCount
decrement that Topology.SetVolumeCapacityFull would have done on the
next heartbeat. The heartbeat path remains unchanged and idempotent
(vl.SetVolumeCapacityFull returns false if already removed, so no
double-decrement).
Recovery still works: if a heartbeat later reports size < limit and
the volume is not oversized, EnsureCorrectWritables adds it back.
- weed/topology/volume_layout.go: RecordAssign returns reachedCapacity
bool; adds AdjustActiveVolumeCountForFull helper.
- weed/topology/topology.go: PickForWrite invokes the decrement on
eager full transitions.
- TestPickForWrite: pass a 1024-byte hint instead of 0 so the default
1MB pendingDelta does not immediately bust the test's 32KB limit.
- New TestRecordAssignReachingCapacityRemovesFromWritable covers the
eager removal, active count accounting, and no-double-accounting.
* fix(master): recover eagerly-removed volume once decay clears pending
After RecordAssign eagerly removes a volume from writables because
effectiveSize reached the limit, decay can later bring effectiveSize
back under the limit (e.g., when a burst of assigns didn't all result
in uploads). Without recovery the volume would stay non-writable until
vacuum or a ReadOnly flip.
UpdateVolumeSize now re-adds the volume to writables once all of the
following hold:
* RecordAssign is what removed it (tracked via fullSince timestamp)
* at least capacityRecoveryDelay has elapsed since the removal (30s)
— this prevents bouncing during a steady stream of assigns near
the limit
* effectiveSize has decayed below the crowded threshold (90% of limit)
* reportedSize is under the limit (actual disk is not over)
* standard EnsureCorrectWritables preconditions: enough copies, all
copies writable, not oversized
The caller (SyncDataNodeRegistration) re-increments activeVolumeCount
symmetrically with the decrement done on eager removal.
* review: release VolumeLayout lock before UpAdjustDiskUsageDelta
adjustActiveVolumeCount held vl.accessLock across the tree-climbing
UpAdjustDiskUsageDelta walk. That walk takes per-level DiskUsages
locks and could be re-entered from other call paths that hold a
node-level lock and then acquire vl.accessLock. Copy the node list
under the VolumeLayout lock and release it before the tree walk to
eliminate the lock-ordering hazard.
|
||
|
Chris Lu
|
dfecd664f9 |
fix(master): do not re-enter warmup when a fresh cluster grows its first volume (#9092)
* fix(master): do not re-enter warmup when a fresh cluster grows its first volume Follow-up investigation on #8777. After fixing the writable-chunk cap deadlock, a second issue surfaced on the same fio reproducer: the weed mount would log thousands of upload data X: filerGrpcAddress assign volume: assign volume failure count:1 path:"/test2/X": assign volume: rpc error: code = Canceled desc = grpc: the client connection is closing cascading from the filer's handler. The mount's own cached gRPC connection to the filer was never invalidated — the "client connection is closing" text is the FILER's cached connection to the MASTER going away, and the message is forwarded verbatim in the filer's AssignVolumeResponse.Error. Root cause: Topology.IsWarmingUp checks the *live* GetMaxVolumeId. On a fresh cluster the master is initialized with SetLastLeaderChangeTime (master_server.go:239 "Seed the warmup timestamp so IsWarmingUp() is active even if the leader change event hasn't fired yet"), but the MaxVolumeId==0 guard is supposed to short-circuit IsWarmingUp for bootstraps so there is no wait. That guard breaks the moment the first volume is grown inside the warmup window: MaxVolumeId flips from 0 to 1, the lastLeaderChangeTime is still within 3*pulse (15 s default), and IsWarmingUp retroactively returns true for the next several seconds. Every AssignVolume in that window returns codes.Unavailable, which trips the filer's shouldInvalidateConnection guard and tears down its cached master connection, which in turn surfaces as "client connection is closing" to every concurrent in-flight call from the mount's file-close flush storm. fio reports EIO on close and the user sees a thousand scary error lines in the mount log for an otherwise correct run. Fix: snapshot `hadVolumesAtLeaderChange` inside SetLastLeaderChangeTime and read that snapshot in IsWarmingUp instead of the live MaxVolumeId. A fresh cluster snapshots "no volumes at leader change" → IsWarmingUp stays false through the entire warmup window regardless of how fast the first grow lands. A real leader transition on a populated cluster still snapshots "has volumes" → IsWarmingUp behaves exactly as before until the 3*pulse window closes. The lock ordering in SetLastLeaderChangeTime reads MaxVolumeId before taking the lastLeaderChangeTimeLock so the two calls cannot interleave weirdly; IsWarmingUp reads both fields under a single RLock acquisition. Verified with the same containerized reproducer used for the deadlock fix: 4 jobs × 250 nrfiles × 40 MiB × 4k randwrite direct. - baseline (master): fio rc=1 (EIO on close), 2809 mount error lines matching "filerGrpcAddress assign volume ... client connection is closing", 788 filer lines matching "warming up", 331 "Removing cached gRPC connection to ...19333 due to error: master is warming up". - patched: fio rc=0 in 1.9 s at 79.2 MiB/s, 0 mount errors, 0 filer "warming up" lines, 0 cached-master-conn invalidations. go test ./weed/topology/... passes. * fix(topology): make NodeImpl.maxVolumeId atomic CodeRabbit flagged on #9092 that my new IsWarmingUp snapshot (hadVolumesAtLeaderChange) reads through GetMaxVolumeId(), which until now returned an unprotected int field on NodeImpl. UpAdjustMaxVolumeId is called from the volume server heartbeat path in parallel with GetMaxVolumeId reads on the assign path, and neither side had any synchronization — a long-standing data race the race detector would flag if the warmup test suite stressed both sides. Switch maxVolumeId to atomic.Uint32 (needle.VolumeId is uint32) and implement UpAdjustMaxVolumeId as a CAS loop so the check-then-set stays linearizable: two heartbeats racing to promote the field will land the higher value deterministically and propagate to the parent exactly once. GetMaxVolumeId is a single atomic load. Callers of both helpers are unchanged; the struct field comment documents why the atomic is necessary. go test -race ./weed/topology/... passes. * refactor(topology): use WarmupDuration helper in IsWarmingUp Gemini review on #9092 flagged that IsWarmingUp re-derives the warmup duration from pulse and WarmupPulseMultiplier instead of using the existing WarmupDuration() helper, which RemainingWarmupDuration already uses. Fold the duration calculation through the helper and short-circuit on lastChange.IsZero() before the time.Since call. No behavior change. |
||
|
Chris Lu
|
b37bbf541a |
feat(master): drain pending size before marking volume readonly (#9036)
* feat(master): drain pending size before marking volume readonly When vacuum, volume move, or EC encoding marks a volume readonly, in-flight assigned bytes may still be pending. This adds a drain step: immediately remove from writable list (stop new assigns), then wait for pending to decay below 4MB or 30s timeout. - Add volumeSizeTracking struct consolidating effectiveSize, reportedSize, and compactRevision into a single map - Add GetPendingSize, waitForPendingDrain, DrainAndRemoveFromWritable, DrainAndSetVolumeReadOnly to VolumeLayout - UpdateVolumeSize detects compaction via compactRevision change and resets effectiveSize instead of decaying - Wire drain into vacuum (topology_vacuum.go) and volume mark readonly (master_grpc_server_volume.go) * fix: use 2MB pending size drain threshold * fix: check crowded state on initial UpdateVolumeSize registration * fix: respect context cancellation in drain, relax test timing - DrainAndSetVolumeReadOnly now accepts context.Context and returns early on cancellation (for gRPC handler timeout/cancel) - waitForPendingDrain uses select on ctx.Done instead of time.Sleep - Increase concurrent heartbeat test timeout from 10s to 15s for CI * fix: use time-based dedup so decay runs even when reported size is unchanged The value-based dedup (same reportedSize + compactRevision = skip) prevented decay from running when pending bytes existed but no writes had landed on disk yet. The reported size stayed the same across heartbeats, so the excess never decayed. Fix: dedup replicas within the same heartbeat cycle using a 2-second time window instead of comparing values. This allows decay to run once per heartbeat cycle even when the reported size is unchanged. Also confirmed finding 1 (draining re-add race) is a false positive: - Vacuum: ensureCorrectWritables only runs for ReadOnly-changed volumes - Move/EC: readonlyVolumes flag prevents re-adding during drain * fix: make VolumeMarkReadonly non-blocking to fix EC integration test timeout The DrainAndSetVolumeReadOnly call in VolumeMarkReadonly gRPC blocked up to 30s waiting for pending bytes to decay. In integration tests (and real clusters during EC encoding), this caused timeouts because multiple volumes are marked readonly sequentially and heartbeats may not arrive fast enough to decay pending within the drain window. Fix: VolumeMarkReadonly now calls SetVolumeReadOnly immediately (stops new assigns) and only logs a warning if pending bytes remain. The drain wait is kept only for vacuum (DrainAndRemoveFromWritable) which runs inside the master's own goroutine pool. Remove DrainAndSetVolumeReadOnly as it's no longer used. * fix: relax test timing, rename test, add post-condition assert * test: add vacuum integration tests with CI workflow Full-cluster integration test for vacuum, modeled on the EC integration tests. Starts a real master + 2 volume servers, uploads data, deletes entries to create garbage, runs volume.vacuum via shell command, and verifies garbage cleanup and data integrity. Test flow: 1. Start cluster (master + 2 volume servers) 2. Upload 10 files to create volume with data 3. Delete 5 files to create ~50% garbage 4. Verify garbage ratio > 10% 5. Run volume.vacuum command 6. Verify garbage cleaned up 7. Verify remaining 5 files are still accessible CI workflow runs on push/PR to master with 15-minute timeout. Log collection on failure via artifact upload. * fix: use 500KB files and delete 75% to exceed vacuum garbage threshold * fix: add shell lock before vacuum command, fix compilation error * fix: strengthen vacuum integration test assertions - waitForServer: use net.DialTimeout instead of grpc.NewClient for real TCP readiness check - verify_garbage_before_vacuum: t.Fatal instead of warning when no garbage detected - verify_cleanup_after_vacuum: t.Fatal if no server reported the volume or cleanup wasn't verified - verify_remaining_data: read actual file contents via HTTP and compare byte-for-byte against original uploaded payloads * fix: use http.Client with timeout and close body before retry |
||
|
Chris Lu
|
10b0bdce02 |
feat: pass expected_data_size from clients for size-aware assignment (#9032)
* feat: pass expected_data_size from clients for size-aware assignment Add expected_data_size field to AssignRequest (master proto) and AssignVolumeRequest (filer proto) so clients can hint how large the data will be. The master uses this instead of the 1MB default when tracking pending volume sizes for weighted assignment. - Add expected_data_size to master.proto AssignRequest - Add expected_data_size to filer.proto AssignVolumeRequest - Wire through filer AssignVolume handler - Wire through HTTP submit handler (uses actual upload size) - Add ExpectedDataSize to VolumeAssignRequest in operation package - Topology.PickForWrite accepts optional expectedDataSize parameter * fix: guard integer conversions in expected_data_size path - common.go: clamp OriginalDataSize to non-negative before uint64 cast - topology.go: cap expectedDataSize at math.MaxInt64 before int64 cast * fix: parse dataSize hint in HTTP /dir/assign and test non-zero expectedDataSize - HTTP /dir/assign now parses optional "dataSize" query parameter and passes it to PickForWrite instead of hardcoded 0 - Add test assertion for PickForWrite with non-zero expectedDataSize |
||
|
Chris LuandCopilot Autofix powered by AI
|
e2c79af6ec |
feat(master): size-aware volume assignment with weighted selection (#9031)
* feat(master): size-aware volume assignment with weighted selection PickForWrite now selects volumes proportional to remaining capacity instead of uniform random, so emptier volumes receive more writes. - Add vid2size map to VolumeLayout tracking effective volume sizes - Weighted pick via random sampling (k=3) for O(1) cost - RecordAssign tracks estimated pending bytes between heartbeats - Exponential decay on heartbeat: halve excess each cycle - Proactive crowded detection using effective size - Zero extra heap allocations on the unconstrained hot path Benchmark (20 writable volumes, unconstrained): Before: 36 ns/op, 32 B/op, 2 allocs/op After: 85 ns/op, 32 B/op, 2 allocs/op * fix: address review feedback on size-aware assignment - RecordAssign: use write lock (Lock) instead of read lock (RLock) since it mutates vid2size map and crowded set - RegisterVolume: clear crowded flag when heartbeat decay drops effective size below the threshold - pickWeightedByRemaining: fix misleading Fisher-Yates comment, simplify to plain random sampling (duplicates are harmless) - ShouldGrowVolumesByDcAndRack: read vid2size under RLock * fix: decay once per heartbeat cycle, not per replica RegisterVolume is called once per replica of a volume. For replicated volumes, the pending size decay was running multiple times per heartbeat cycle, reducing the excess by 75% instead of 50% (for 2 replicas). Fix: track vid2reportedSize and only run decay when the heartbeat- reported size actually changes. A second replica reporting the same size in the same cycle is a no-op. Also fix CodeQL alert: cap count*EstimatedNeedleSizeBytes to avoid uint64→int64 overflow in RecordAssign call. * Potential fix for pull request finding 'CodeQL / Incorrect conversion between integer types' Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> * fix: fail fast in test setup on JSON errors - setupWithLimit now takes testing.TB and calls t.Fatalf on unmarshal errors or type assertion failures instead of printing and continuing - benchSetup removed; benchmarks reuse setupWithLimit directly * fix: run size decay on every heartbeat, not just new volumes RegisterVolume is only called for newly discovered volumes, not on every heartbeat. The pending size decay was never running in production. - Extract decay logic into UpdateVolumeSize(), called from SyncDataNodeRegistration for every reported volume on every heartbeat - RegisterVolume only initializes vid2size for brand-new volumes - Constrained PickForWrite: scan from random offset, collect up to pickSampleSize matches in a stack array (no append allocation) - Tests now exercise UpdateVolumeSize directly instead of RegisterVolume to match the production heartbeat path * fix: compute pending bytes in uint64 to satisfy CodeQL --------- Co-authored-by: Copilot Autofix powered by AI <62310815+github-advanced-security[bot]@users.noreply.github.com> |
||
|
|
8cde3d4486 |
Add data file compaction to iceberg maintenance (Phase 2) (#8503)
* Add iceberg_maintenance plugin worker handler (Phase 1) Implement automated Iceberg table maintenance as a new plugin worker job type. The handler scans S3 table buckets for tables needing maintenance and executes operations in the correct Iceberg order: expire snapshots, remove orphan files, and rewrite manifests. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Add data file compaction to iceberg maintenance handler (Phase 2) Implement bin-packing compaction for small Parquet data files: - Enumerate data files from manifests, group by partition - Merge small files using parquet-go (read rows, write merged output) - Create new manifest with ADDED/DELETED/EXISTING entries - Commit new snapshot with compaction metadata Add 'compact' operation to maintenance order (runs before expire_snapshots), configurable via target_file_size_bytes and min_input_files thresholds. Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com> * Fix memory exhaustion in mergeParquetFiles by processing files sequentially Previously all source Parquet files were loaded into memory simultaneously, risking OOM when a compaction bin contained many small files. Now each file is loaded, its rows are streamed into the output writer, and its data is released before the next file is loaded — keeping peak memory proportional to one input file plus the output buffer. * Validate bucket/namespace/table names against path traversal Reject names containing '..', '/', or '\' in Execute to prevent directory traversal via crafted job parameters. * Add filer address failover in iceberg maintenance handler Try each filer address from cluster context in order instead of only using the first one. This improves resilience when the primary filer is temporarily unreachable. * Add separate MinManifestsToRewrite config for manifest rewrite threshold The rewrite_manifests operation was reusing MinInputFiles (meant for compaction bin file counts) as its manifest count threshold. Add a dedicated MinManifestsToRewrite field with its own config UI section and default value (5) so the two thresholds can be tuned independently. * Fix risky mtime fallback in orphan removal that could delete new files When entry.Attributes is nil, mtime defaulted to Unix epoch (1970), which would always be older than the safety threshold, causing the file to be treated as eligible for deletion. Skip entries with nil Attributes instead, matching the safer logic in operations.go. * Fix undefined function references in iceberg_maintenance_handler.go Use the exported function names (ShouldSkipDetectionByInterval, BuildDetectorActivity, BuildExecutorActivity) matching their definitions in vacuum_handler.go. * Remove duplicated iceberg maintenance handler in favor of iceberg/ subpackage The IcebergMaintenanceHandler and its compaction code in the parent pluginworker package duplicated the logic already present in the iceberg/ subpackage (which self-registers via init()). The old code lacked stale-plan guards, proper path normalization, CAS-based xattr updates, and error-returning parseOperations. Since the registry pattern (default "all") makes the old handler unreachable, remove it entirely. All functionality is provided by iceberg.Handler with the reviewed improvements. * Fix MinManifestsToRewrite clamping to match UI minimum of 2 The clamp reset values below 2 to the default of 5, contradicting the UI's advertised MinValue of 2. Clamp to 2 instead. * Sort entries by size descending in splitOversizedBin for better packing Entries were processed in insertion order which is non-deterministic from map iteration. Sorting largest-first before the splitting loop improves bin packing efficiency by filling bins more evenly. * Add context cancellation check to drainReader loop The row-streaming loop in drainReader did not check ctx between iterations, making long compaction merges uncancellable. Check ctx.Done() at the top of each iteration. * Fix splitOversizedBin to always respect targetSize limit The minFiles check in the split condition allowed bins to grow past targetSize when they had fewer than minFiles entries, defeating the OOM protection. Now bins always split at targetSize, and a trailing runt with fewer than minFiles entries is merged into the previous bin. * Add integration tests for iceberg table maintenance plugin worker Tests start a real weed mini cluster, create S3 buckets and Iceberg table metadata via filer gRPC, then exercise the iceberg.Handler operations (ExpireSnapshots, RemoveOrphans, RewriteManifests) against the live filer. A full maintenance cycle test runs all operations in sequence and verifies metadata consistency. Also adds exported method wrappers (testing_api.go) so the integration test package can call the unexported handler methods. * Fix splitOversizedBin dropping files and add source path to drainReader errors The runt-merge step could leave leading bins with fewer than minFiles entries (e.g. [80,80,10,10] with targetSize=100, minFiles=2 would drop the first 80-byte file). Replace the filter-based approach with an iterative merge that folds any sub-minFiles bin into its smallest neighbor, preserving all eligible files. Also add the source file path to drainReader error messages so callers can identify which Parquet file caused a read/write failure. * Harden integration test error handling - s3put: fail immediately on HTTP 4xx/5xx instead of logging and continuing - lookupEntry: distinguish NotFound (return nil) from unexpected RPC errors (fail the test) - writeOrphan and orphan creation in FullMaintenanceCycle: check CreateEntryResponse.Error in addition to the RPC error * go fmt --------- Co-authored-by: Copilot <copilot@github.com> Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com> |
||
|
Chris Lu
|
baae672b6f |
feat: auto-disable master vacuum when plugin worker is active (#8624)
* feat: auto-disable master vacuum when plugin vacuum worker is active When a vacuum-capable plugin worker connects to the admin server, the admin server calls DisableVacuum on the master to prevent the automatic scheduled vacuum from conflicting with the plugin worker's vacuum. When the worker disconnects, EnableVacuum is called to restore the default behavior. A safety net in the topology refresh loop re-enables vacuum if the admin server disconnects without cleanup. * rename isAdminServerConnected to isAdminServerConnectedFunc * add 5s timeout to DisableVacuum/EnableVacuum gRPC calls Prevents the monitor goroutine from blocking indefinitely if the master is unresponsive. * track plugin ownership of vacuum disable to avoid overriding operator - Add vacuumDisabledByPlugin flag to Topology, set when DisableVacuum is called while admin server is connected (i.e., by plugin monitor) - Safety net only re-enables vacuum when it was disabled by plugin, not when an operator intentionally disabled it via shell command - EnableVacuum clears the plugin flag * extract syncVacuumState for testability, add fake toggler tests Extract the single sync step into syncVacuumState() with a vacuumToggler interface. Add TestSyncVacuumState with a fake toggler that verifies disable/enable calls on state transitions. * use atomic.Bool for isDisableVacuum and vacuumDisabledByPlugin Both fields are written by gRPC handlers and read by the vacuum goroutine, causing a data race. Use atomic.Bool with Store/Load for thread-safe access. * use explicit by_plugin field instead of connection heuristic Add by_plugin bool to DisableVacuumRequest proto so the caller declares intent explicitly. The admin server monitor sets it to true; shell commands leave it false. This prevents an operator's intentional disable from being auto-reversed by the safety net. * use setter for admin server callback instead of function parameter Move isAdminServerConnected from StartRefreshWritableVolumes parameter to Topology.SetAdminServerConnectedFunc() setter. Keeps the function signature stable and decouples the topology layer from the admin server concept. * suppress repeated log messages on persistent sync failures Add retrying parameter to syncVacuumState so the initial state transition is logged at V(0) but subsequent retries of the same transition are silent until the call succeeds. * clear plugin ownership flag on manual DisableVacuum Prevents stale plugin flag from causing incorrect auto-enable when an operator manually disables vacuum after a plugin had previously disabled it. * add by_plugin to EnableVacuumRequest for symmetric ownership tracking Plugin-driven EnableVacuum now only re-enables if the plugin was the one that disabled it. If an operator manually disabled vacuum after the plugin, the plugin's EnableVacuum is a no-op. This prevents the plugin monitor from overriding operator intent on worker disconnect. * use cancellable context for monitorVacuumWorker goroutine Replace context.Background() with a cancellable context stored as bgCancel on AdminServer. Shutdown() calls bgCancel() so monitorVacuumWorker exits cleanly via ctx.Done(). * track operator and plugin vacuum disables independently Replace single isDisableVacuum flag with two independent flags: vacuumDisabledByOperator and vacuumDisabledByPlugin. Each caller only flips its own flag. The effective disabled state is the OR of both. This prevents a plugin connect/disconnect cycle from overriding an operator's manual disable, and vice versa. * fix safety net to clear plugin flag, not operator flag The safety net should call EnableVacuumByPlugin() to clear only the plugin disable flag when the admin server disconnects. The previous call to EnableVacuum() incorrectly cleared the operator flag instead. |
||
|
Chris Lu
|
2ec0a67ee3 |
master: return 503/Unavailable during topology warmup after leader change (#8529)
* master: return 503/Unavailable during topology warmup after leader change After a master restart or leader change, the topology is empty until volume servers reconnect and send heartbeats. During this warmup window (3 heartbeat intervals = 15 seconds), volume lookups that fail now return 503 Service Unavailable (HTTP) or gRPC Unavailable instead of 404 Not Found, signaling clients to retry with other masters. * master: skip warmup 503 on fresh start and single-master setups - Check MaxVolumeId > 0 to distinguish restart from fresh start (MaxVolumeId is Raft-persisted, so 0 means no prior data) - Check peer count > 1 so single-master deployments aren't affected (no point suggesting "retry with other masters" if there are none) * master: address review feedback and block assigns during warmup - Protect LastLeaderChangeTime with dedicated mutex (fix data race) - Extract warmup multiplier as WarmupPulseMultiplier constant - Derive Retry-After header from pulse config instead of hardcoding - Only trigger warmup 503 for "not found" errors, not parse errors - Return nil response (not partial) on gRPC Unavailable - Add doc comments to IsWarmingUp, getter/setter, WarmupDuration - Block volume assign requests (HTTP and gRPC) during warmup, since the topology is incomplete and assignments would be unreliable - Skip warmup behavior for single-master setups (no peers to retry) * master: apply warmup to all setups, skip only on fresh start Single-master restarts still have an empty topology until heartbeats arrive, so warmup protection should apply there too. The only case to skip is a fresh cluster start (MaxVolumeId == 0), which already has no volumes to look up. - Remove GetMasterCount() > 1 guard from all warmup checks - Remove now-unused GetMasterCount helper - Update error messages to "topology is still loading" (not "retry with other masters" which doesn't apply to single-master) * master: add client-side retry on Unavailable for lookup and assign The server-side 503/Unavailable during warmup needs client cooperation. Previously, LookupVolumeIds and Assign would immediately propagate the error without retry. Now both paths retry with exponential backoff (1s -> 1.5s -> ... up to 6s) when receiving Unavailable, respecting context cancellation. This covers the warmup window where the master's topology is still loading after a restart or leader change. * master: seed warmup timestamp in legacy raft path at setup The legacy raft path only set lastLeaderChangeTime inside the event listener callback, which could fire after IsLeader() was already observed as true in SetRaftServer. Seed the timestamp at setup time (matching the hashicorp path) so IsWarmingUp() is active immediately. * master: fix assign retry loop to cover full warmup window The retry loop used waitTime <= maxWaitTime as a stop condition, causing it to give up after ~13s while warmup lasts 15s. Now cap each individual sleep at maxWaitTime but keep retrying until the context is cancelled. * master: preserve gRPC status in lookup retry and fix retry window Return the raw gRPC error instead of wrapping with fmt.Errorf so status.FromError() can extract the status code. Use proper gRPC status check (codes.Unavailable) instead of string matching. Also cap individual sleep at maxWaitTime while retrying until ctx is done. * master: use gRPC status code instead of string matching in assign retry Use status.FromError/codes.Unavailable instead of brittle strings.Contains for detecting retriable gRPC errors in the assign retry loop. * master: use remaining warmup duration for Retry-After header Set Retry-After to the remaining warmup time instead of the full warmup duration, so clients don't wait longer than necessary. * master: reset ret.Replicas before populating from assign response Clear Replicas slice before appending to prevent duplicate entries when the assign response is retried or when alternative requests are attempted. * master: add unit tests for warmup retry behavior Test that Assign() and LookupVolumeIds() retry on codes.Unavailable and stop promptly when the context is cancelled. * master: record leader change time before initialization work Move SetLastLeaderChangeTime() to fire immediately when the leader change event is received, before DoBarrier(), EnsureTopologyId(), and updatePeers(), so the warmup clock starts at the true moment of leadership transition. * master: use topology warmup duration in volume growth wait loop Replace hardcoded constants.VolumePulsePeriod * 2 with topo.IsWarmingUp() and topo.WarmupDuration() so the growth wait stays in sync with the configured warmup window. Remove unused constants import. * master: resolve master before creating RPC timeout context Move GetMaster() call before context.WithTimeout() so master resolution blocking doesn't consume the gRPC call timeout. * master: use NotFound flag instead of string matching for volume lookup Add a NotFound field to LookupResult and set it in findVolumeLocation when a volume is genuinely missing. Update HTTP and gRPC warmup checks to use this flag instead of strings.Contains on the error message. * master: bound assign retry loop to 30s for deadline-free contexts Without a context deadline, the Unavailable retry loop could spin forever. Add a maxRetryDuration of 30s so the loop gives up even when no context deadline is set. * master: strengthen assign retry cancellation test Verify the retry loop actually retried (callCount > 1) and that the returned error is context.DeadlineExceeded, not just any error. * master: extract shared retry-with-backoff utility Add util.RetryWithBackoff for context-aware, bounded retry with exponential backoff. Refactor both Assign() and LookupVolumeIds() to use it instead of duplicating the retry/sleep/backoff logic. * master: cap waitTime in RetryWithBackoff to prevent unbounded growth Cap the backoff waitTime at maxWaitTime so it doesn't grow indefinitely in long-running retry scenarios. * master: only return Unavailable during warmup when all lookups failed For batched LookupVolume requests, return partial results when some volumes are found. Only return codes.Unavailable when no volumes were successfully resolved, so clients benefit from partial results instead of retrying unnecessarily. * master: set retriable error message in 503 response body When returning 503 during warmup, replace the "not found" error in the JSON body with "service warming up, please retry" so clients don't treat it as a permanent error. * master: guard empty master address in LookupVolumeIds If GetMaster() returns empty (no master found or ctx cancelled), return an appropriate error instead of dialing an empty address. Returns ctx.Err() if context is done, otherwise codes.Unavailable to trigger retry. * master: add comprehensive tests for RetryWithBackoff Test success after retries, non-retryable error handling, context cancellation, and maxDuration cap with context.Background(). * master: enforce hard maxDuration bound in RetryWithBackoff Use a deadline instead of elapsed-time check so the last sleep is capped to remaining time. This prevents the total retry duration from overshooting maxDuration by up to one full backoff interval. * master: respect fresh-start bypass in RemainingWarmupDuration Check IsWarmingUp() first (which returns false when MaxVolumeId==0) so RemainingWarmupDuration returns 0 on fresh clusters. * master: round up Retry-After seconds to avoid underestimating Use math.Ceil so fractional remaining seconds (e.g. 1.9s) round up to the next integer (2) instead of flooring down (1). * master: tighten batch lookup warmup to all-NotFound only Only return codes.Unavailable when every requested volume ID was a transient not-found. Mixed cases with non-NotFound errors now return the response with per-volume error details preserved. * master: reduce retry log noise and fix timer leak Lower per-attempt retry log from V(0) to V(1) to reduce noise during warmup. Replace time.After with time.NewTimer to avoid lingering timers when context is cancelled. * master: add per-attempt timeout for assign RPC Use a 10s per-attempt timeout so a single slow RPC can't consume the entire 30s retry budget when ctx has no deadline. * master: share single 30s retry deadline across assign request entries The Assign() function iterates over primary and fallback requests, previously giving each its own 30s RetryWithBackoff budget. With a primary + fallback, the total could reach 60s. Compute one deadline up front and pass the remaining budget to each RetryWithBackoff call so the entire Assign() call stays within a single 30s cap. * master: strengthen context-cancel test with DeadlineExceeded and retry assertions Assert errors.Is(err, context.DeadlineExceeded) to verify the error is specifically from the context deadline, and check callCount > 1 to prove retries actually occurred before cancellation. Mirrors the pattern used in TestAssignStopsOnContextCancel. * master: bound GetMaster with per-attempt timeout in LookupVolumeIds GetMaster() calls WaitUntilConnected() which can block indefinitely if no master is available. Previously it used the outer ctx, so a slow master resolution could consume the entire RetryWithBackoff budget in a single attempt. Move the per-attempt timeoutCtx creation before the GetMaster call so both master resolution and the gRPC LookupVolume RPC share one grpcTimeout-bounded attempt. * master: use deadline-aware context for assign retry budget The shared 30s deadline only limited RetryWithBackoff's internal wall-clock tracking, but per-attempt contexts were still derived from the original ctx and could run for up to 10s even when the budget was nearly exhausted. Create a deadlineCtx from the computed deadline and derive both RetryWithBackoff and per-attempt timeouts from it so all operations honor the shared 30s cap. * master: skip warmup gate for empty lookup requests When VolumeOrFileIds is empty, notFoundCount == len(req.VolumeOrFileIds) is 0 == 0 which is true, causing empty lookup batches during warmup to return codes.Unavailable and be retried endlessly. Add a len(req.VolumeOrFileIds) > 0 guard so empty requests pass through. * master: validate request fields before warmup gate in Assign Move Replication and Ttl parsing before the IsWarmingUp() check so invalid inputs get a proper validation error instead of being masked by codes.Unavailable during warmup. Pure syntactic validation does not depend on topology state and should run first. * master: check deadline and context before starting retry attempt RetryWithBackoff only checked the deadline and context after an attempt completed or during the sleep select. If the deadline expired or context was canceled during sleep, the next iteration would still call operation() before detecting it. Add pre-operation checks so no new attempt starts after the budget is exhausted. * master: always return ctx.Err() on context cancellation in RetryWithBackoff When ctx.Err() is non-nil, the pre-operation check was returning lastErr instead of ctx.Err(). This broke callers checking errors.Is(err, context.DeadlineExceeded) and contradicted the documented contract. Always return ctx.Err() so the cancellation reason is properly surfaced. * master: handle warmup errors in StreamAssign without killing the stream StreamAssign was returning codes.Unavailable errors from Assign directly, which terminates the gRPC stream and breaks pooled connections. Instead, return transient errors as in-band error responses so the stream survives warmup periods. Also reset assignClient in doAssign on Send/Recv failures so a broken stream doesn't leave the proxy permanently dead. * master: wait for warmup before slot search in findAndGrow findEmptySlotsForOneVolume was called before the warmup wait loop, selecting slots from an incomplete topology. Move the warmup wait before slot search so volume placement uses the fully warmed-up topology with all servers registered. * master: add Retry-After header to /dir/assign warmup response The /dir/lookup handler already sets Retry-After during warmup but /dir/assign did not, leaving HTTP clients without guidance on when to retry. Add the same header using RemainingWarmupDuration(). * master: only seed warmup timestamp on leader at startup SetLastLeaderChangeTime was called unconditionally for both leader and follower nodes. Followers don't need warmup state, and the leader change event listener handles real elections. Move the seed into the IsLeader() block so only the startup leader gets warmup initialized. * master: preserve codes.Unavailable for StreamAssign warmup errors in doAssign StreamAssign returns transient warmup errors as in-band AssignResponse.Error messages. doAssign was converting these to plain fmt.Errorf, losing the codes.Unavailable classification needed for the caller's retry logic. Detect warmup error messages and wrap them as status.Error(codes.Unavailable) so RetryWithBackoff can retry. |
||
|
Chris Lu
|
b08bb8237c |
Fix master leader election startup issue (#8340)
* Fix master leader election startup issue Fixes #error-log-leader-not-selected-yet * Fix master leader election startup issue This change improves server address comparison using the 'Equals' method and handles recursion in topology leader lookup, resolving the 'leader not selected yet' error during master startup. * Merge user improvements: use MaybeLeader for non-blocking checks * not useful test * Address code review: optimize Equals, fix deadlock in IsLeader, safe access in Leader |
||
|
Chris Lu
|
753e1db096 |
Prevent split-brain: Persistent ClusterID and Join Validation (#8022)
* Prevent split-brain: Persistent ClusterID and Join Validation - Persist ClusterId in Raft store to survive restarts. - Validate ClusterId on Raft command application (piggybacked on MaxVolumeId). - Prevent masters with conflicting ClusterIds from joining/operating together. - Update Telemetry to report the persistent ClusterId. * Refine ClusterID validation based on feedback - Improved error message in cluster_commands.go. - Added ClusterId mismatch check in RaftServer.Recovery. * Handle Raft errors and support Hashicorp Raft for ClusterId - Check for errors when persisting ClusterId in legacy Raft. - Implement ClusterId generation and persistence for Hashicorp Raft leader changes. - Ensure consistent error logging. * Refactor ClusterId validation - Centralize ClusterId mismatch check in Topology.SetClusterId. - Simplify MaxVolumeIdCommand.Apply and RaftServer.Recovery to rely on SetClusterId. * Fix goroutine leak and add timeout - Handle channel closure in Hashicorp Raft leader listener. - Add timeout to Raft Apply call to prevent blocking. * Fix deadlock in legacy Raft listener - Wrap ClusterId generation/persistence in a goroutine to avoid blocking the Raft event loop (deadlock). * Rename ClusterId to SystemId - Renamed ClusterId to SystemId across the codebase (protobuf, topology, server, telemetry). - Regenerated telemetry.pb.go with new field. * Rename SystemId to TopologyId - Rename to SystemId was intermediate step. - Final name is TopologyId for the persistent cluster identifier. - Updated protobuf, topology, raft server, master server, and telemetry. * Optimize Hashicorp Raft listener - Integrated TopologyId generation into existing monitorLeaderLoop. - Removed extra goroutine in master_server.go. * Fix optimistic TopologyId update - Removed premature local state update of TopologyId in master_server.go and raft_hashicorp.go. - State is now solely updated via the Raft state machine Apply/Restore methods after consensus. * Add explicit log for recovered TopologyId - Added glog.V(0) info log in RaftServer.Recovery to print the recovered TopologyId on startup. * Add Raft barrier to prevent TopologyId race condition - Implement ensureTopologyId helper method - Send no-op MaxVolumeIdCommand to sync Raft log before checking TopologyId - Ensures persisted TopologyId is recovered before generating new one - Prevents race where generation happens during log replay * Serialize TopologyId generation with mutex - Add topologyIdGenLock mutex to MasterServer struct - Wrap ensureTopologyId method with lock to prevent concurrent generation - Fixes race where event listener and manual leadership check both generate IDs - Second caller waits for first to complete and sees the generated ID * Add TopologyId recovery logging to Apply method - Change log level from V(1) to V(0) for visibility - Log 'Recovered TopologyId' when applying from Raft log - Ensures recovery is visible whether from snapshot or log replay - Matches Recovery() method logging for consistency * Fix Raft barrier timing issue - Add 100ms delay after barrier command to ensure log application completes - Add debug logging to track barrier execution and TopologyId state - Return early if barrier command fails - Prevents TopologyId generation before old logs are fully applied * ensure leader * address comments * address comments * redundant * clean up * double check * refactoring * comment |
||
|
Chris Luandgemini-code-assist[bot]
|
7acebf11ea |
Master: volume assignment concurrency (#7159)
* volume assginment concurrency * accurate tests * ensure uniqness * reserve atomically * address comments * atomic * ReserveOneVolumeForReservation * duplicated * Update weed/topology/node.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * Update weed/topology/node.go Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * atomic counter * dedup * select the appropriate functions based on the useReservations flag --------- Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> |
||
|
Lisandro Pin
|
cea34dc21a |
Fix implementation of master_pb.CollectionList RPC call (#6715)
|
||
|
Konstantin Lebedev
|
e2e97db917 |
[master] avoid timeout when assigning for main request with filter by DC or rack (#6291)
* avoid timeout when assigning for main request with filter by DC or rack https://github.com/seaweedfs/seaweedfs/issues/6290 * use constant NoWritableVolumes |
||
|
Konstantin Lebedev
|
8836fa19b6 | use ShouldGrowVolumesByDcAndRack (#6280) | ||
|
chrislu
|
ccf1795e6f | wait a bit before getting the next volume id if the leader is recently elected | ||
|
Konstantin Lebedev
|
67a252ee8a | [master] refactor func ShouldGrowVolumes (#5884) | ||
|
chrislu
|
a4b25a642d | math/rand => math/rand/v2 | ||
|
Konstantin Lebedev
|
b2ffcdaab2 |
[master] do sync grow request only if absolutely necessary (#5821)
* do sync grow request only if absolutely necessary https://github.com/seaweedfs/seaweedfs/pull/5819 * remove check VolumeGrowStrategy Threshold on PickForWrite * fix fmt.Errorf |
||
|
wyangandYang Wang
|
4b1f539ab8 |
fix allocate reduplicated volumeId to different volume (#5811)
* fix allocate reduplicated volumeId to different volume * only check barrier when read --------- Co-authored-by: Yang Wang <yangwang@weride.ai> |
||
|
Konstantin Lebedev
|
04f4b10884 |
fix: avoid timeout if datacenter does not exist in topology (#5772)
* fix: avoid timeout if datacenter does not exist in topology * fix: error msg * fix: rm dublicate check * fix: compare * revert minor change |
||
|
Konstantin Lebedev
|
0f8e76bbd6 | fix: clean metric MasterReplicaPlacementMismatch for unregister volume (#5239) | ||
|
chrislu
|
bebbc9fe44 | create volume grow request if the selected volume is close to full | ||
|
chrislu
|
c6b1dc7058 | remove unused code | ||
|
Konstantin Lebedev
|
5ee04d20fa | Healthz check for deadlocks (#4558) | ||
|
Stewart Miles
|
264be0d2d4 |
Retry until a leader is selected. (#4318)
Fixes regression introduced in https://github.com/seaweedfs/seaweedfs/pull/4313 Related to #4307 |
||
|
Stewart Miles
|
57ab1f8516 |
Use exponential backoff to query leader. (#4313)
`topology.Leader()` was using a backoff that typically resulted in at least a 5s delay when initially starting a master and raft server. This changes the backoff algorithm to use exponential backoff starting with 100ms and waiting up to 20s for leader selection. Related to #4307 |
||
|
zemulandzemul
|
0bf56298d5 |
fix chunk.ModifiedTsNs (#4264)
* fix * fix mtime s > ns --------- Co-authored-by: zemul <zhouzemiao@ihuman.com> |
||
|
Guo Lei
|
d8cfa1552b |
support enable/disable vacuum (#4087)
* stop vacuum * suspend/resume vacuum * remove unused code * rename * rename param |
||
|
chrislu
|
3cb914f7e1 | avoid dead lock | ||
|
chrislu
|
576c113c59 |
replace PR https://github.com/seaweedfs/seaweedfs/pull/3621
replace https://github.com/seaweedfs/seaweedfs/pull/3621 |
||
|
Patrick Schmidt
|
7b424a54dc | Add raft server access mutex to avoid races (#3503) | ||
|
chrislu
|
26dbc6c905 | move to https://github.com/seaweedfs/seaweedfs | ||
|
chrislu
|
3828b8ce87 | "github.com/chrislusf/raft" => "github.com/seaweedfs/raft" | ||
|
guol-fnst
|
b12944f9c6 |
fix naming convention
notify volume server of duplicate directoris improve searching efficiency |
||
|
guol-fnst
|
de6aa9cce8 | avoid duplicated volume directory |