* admin: add bucket lifecycle rule editing
* address greptile's comments
* more small fixes
* coderabbit's comments
* more comment fixes
* more fixes
* more
* maybe last
* last ?
* 14850
* 14851
* filer: stamp the content MD5 on every SaveInsideFiler write
An entry's ETag falls back to Attributes.Md5, so conditional writers key
IF_ETAG_MATCH off it. SaveInsideFiler carried the looked-up attributes
forward without refreshing the hash, leaving it describing whatever the
previous writer stored: a later conditional write matched the stale hash
and overwrote content that had already changed.
* s3api: give the bucket lifecycle constants and the write route key one definition each
The extended-attribute keys, the XML size cap and the object-write ring key
prefix were each spelled out in two places, so the admin dashboard's copies
could drift from the gateway's. Move them to the packages both sides already
import and alias them where the short local name reads better.
* admin: patch the bucket entry's lifecycle keys instead of rewriting the entry
The save read the bucket entry, edited its extended map and wrote the whole
entry back, guarded by IF_UNMODIFIED_SINCE. Nothing that writes a bucket
entry advances its mtime - not the S3 gateway's patchBucketEntry, not
SetBucketOwner, not SetBucketQuota - so the guard never fired and the stale
snapshot reverted whatever else had changed since the lookup.
Send the PATCH_EXTENDED mutation the S3 gateway already uses for these keys:
the filer re-reads and merges under the bucket path lock, so only the two
lifecycle keys move. That removes the reason for the mtime snapshot, the
verification retry loop and the compensating restore of the cleared day-TTL
rules, which the migration now logs instead.
* s3api: run the delete-lifecycle day-TTL migration through the shared helper
DeleteBucketLifecycleHandler kept its own copy of the read-strip-write
sequence the put handler now shares, including a missing return that let a
ToText failure persist a truncated filer.conf and write a second response.
It also wrote the whole file back unconditionally, reverting any concurrent
edit; the shared helper writes conditionally.
* admin: answer 404 when a lifecycle request names a bucket that does not exist
Every SetBucketLifecycle failure came back as 500, including the lookup miss
for an unknown bucket, so a client or monitor read a caller error as a server
fault and retried it.
* s3api: emit lifecycle XML a client would recognize
Two changes to what MarshalCanonical writes, both visible through
GetBucketLifecycleConfiguration, which replays the stored bytes verbatim:
stamp the S3 namespace on the root, and put a size range under <And>. A
<Filter> carries one predicate, so two size bounds side by side is a shape
AWS does not document. Parsing still accepts either.
* admin: fix the lifecycle editor's handling of stored status, deletes and empty saves
Four things the editor got wrong:
A stored <Status> the S3 API never validated, say 'enabled', left both radio
buttons unchecked, so reading the form threw on a null querySelector result
and Save did nothing. Collapse anything but an exact 'Enabled' to 'Disabled',
which is what the engine already does with it.
Deleting a rule re-rendered an open edit form from the snapshot taken when
editing began, discarding what had been typed; every other transition folds
the form in first.
The Transition warning only matched a bare <Transition>, missing the form
with attributes, self-closed or namespace-prefixed.
Saving an emptied rule list clears the configuration through a path with no
prompt, next to a Delete-all-rules button that asks.
Also collapses the three divergent copies of formatBytes on this page to one.
* filer: stop the day-TTL migration from deleting an operator's path rule
The migration removed every rule under the bucket's path that carried a day
TTL in the bucket's collection. The add path it is retiring used
AddLocationConf, which merged its TTL onto whatever already sat at the
prefix, so a rule can hold operator settings the lifecycle path never wrote -
a disk type, WORM retention, a read-only flag, a placement pin. Deleting the
whole rule to retire its TTL took those with it, leaving objects under that
prefix on defaults nobody asked for.
Delete only rules shaped like ones the add path created from scratch;
anything else keeps its settings and loses just the TTL.
---------
Co-authored-by: Chris Lu <chris.lu@gmail.com>
Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>
* admin: surface lifecycle rule counts in bucket listing
* admin: add bucket lifecycle JSON endpoint
* admin: show lifecycle rules on the buckets page
* admin: make the lifecycle count badge keyboard-accessible
* admin: match buckets empty-state colspan to the column count
* admin: drop stale lifecycle modal responses
* make
* s3: enforce bucket quota on logical size, not un-vacuumed physical size
A bucket full of deleted/overwritten objects awaiting vacuum went
read-only while its live data stayed under quota, because enforcement
used the raw single-copy volume size with garbage included. Subtract
DeletedByteCount via a LogicalSize() helper in the auto-enforce loop,
the s3.bucket.quota.enforce command, and the bucket_size_bytes metric
(labeled logical but counting garbage too). Deleting objects now
relieves quota immediately and enforcement matches the UI usage figure.
* admin: surface bucket read-only state in the S3 buckets UI
Read the read-only flag quota enforcement writes to filer.conf and show
it as a badge in the bucket list and a Status row in the details modal,
so an operator can see why writes are being rejected.
* fix(admin): use basePath for API fetches when urlPrefix is set
* fix(admin): drop duplicate iam-utils script on Groups page
* fix(admin): route topics page fetches through basePath
The Topics page missed two fetch() calls that still used root-relative
URLs, so create-topic and view-details still broke when -urlPrefix was
set.
---------
Co-authored-by: Maksim Babkou <maksim.babkou@innovatrics.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* fix(admin): list all masters and dedupe EC file counts in dashboard
Dashboard -> Master Nodes only ever showed the currently connected master
because getMasterNodesStatus hard-coded a single entry. Replace it with a
RaftListClusterServers call that returns every master in the raft group and
tags the real leader, falling back to the current master only if the raft
call fails.
Buckets -> Object Store Buckets could render 0 objects for a bucket backed
by an EC volume. Every shard holder reports the same whole-volume
file_count (read from the replicated .ecx), so the first-seen value wins;
if that first node had not yet finished loading .ecx it reported 0 and
pinned the aggregate at 0. Take the max across reporting nodes instead.
The dashboard header total_files also dropped after volumes were converted
to erasure coding because getTopologyViaGRPC never folded EC file_count
into topology.TotalFiles. Aggregate it with the same max/sum dedupe.
* fix(admin): address PR review comments
- bound RaftListClusterServers with a 3s timeout so the dashboard endpoint
cannot hang on a stalled master
- pre-validate raft addresses with net.SplitHostPort before calling
pb.GrpcAddressToServerAddress, which otherwise glog.Fatalf's on a
malformed entry and would crash the admin process
- when raft is unreachable, mark the fallback master as not-leader rather
than claiming leadership the code cannot verify
- warn when summed EC delete_count exceeds file_count while folding into
topology.TotalFiles, matching collectCollectionStats
* fix(admin): distinguish empty raft response from RPC failure
When RaftListClusterServers returns successfully with no servers, raft is
not initialized (standalone/non-raft cluster), so the single fallback
master is the leader. Only treat the fallback as a non-leader when the
RPC actually failed.
* fix(admin): remove misleading Objects column from S3 buckets page
The bucket "Objects" column displayed needle counts from volume
collection stats, not actual S3 object counts. This is confusing
because a single S3 object can span multiple needles (multipart
uploads, versions) and the count is inaccurate for EC volumes.
Remove the ObjectCount field from S3Bucket, the Objects table column,
the sort-by-objects handler, the detail-view row, and both CSV export
references.
* fix(admin): correct cell indexes in fallback bucket CSV export
After the Objects column was removed, the fallback CSV exporter in
admin.js still used stale cell indexes: cells[1] mapped to Owner
(not Created), cells[2] to Created (not Size), cells[3] to Logical
Size (not Quota). Align all indexes with the current table column
order and include Owner, Logical Size, and Physical Size.
* fix(admin): respect urlPrefix in S3 bucket and S3Tables navigation links (#8884)
Several admin UI templates used hardcoded URLs (templ.SafeURL) instead of
dash.PUrl(ctx, ...) for navigation links, causing 404 errors when the
admin is deployed with --urlPrefix.
Fixed in: s3_buckets.templ, s3tables_buckets.templ, s3tables_tables.templ
* fix(admin): URL-escape bucketName in S3Tables navigation links
Add url.PathEscape(bucketName) for consistency and correctness in
s3tables_tables.templ (back-to-namespaces link) and s3tables_buckets.templ
(namespace link), matching the escaping already used in the table details link.
* fix: paginate bucket listing in Admin UI to show all buckets
The Admin UI's GetS3Buckets() had a hardcoded Limit of 1000 in the
ListEntries request, causing the Total Buckets count to cap at 1000
even when more buckets exist. This adds pagination to iterate through
all buckets by continuing from the last entry name when a full page
is returned.
Fixesseaweedfs/seaweedfs#8564
* feat: add server-side pagination and sorting to S3 buckets page
Add pagination controls, page size selector, and sortable column
headers to the Admin UI's Object Store buckets page, following the
same pattern used by the Cluster Volumes page. This ensures the UI
remains responsive with thousands of buckets.
- Add CurrentPage, TotalPages, PageSize, SortBy, SortOrder to S3BucketsData
- Accept page/pageSize/sortBy/sortOrder query params in ShowS3Buckets handler
- Sort buckets by name, owner, created, objects, logical/physical size
- Paginate results server-side (default 100 per page)
- Add pagination nav, page size dropdown, and sort indicators to template
* Update s3_buckets_templ.go
* Update object_store_users_templ.go
* fix: use errors.Is(err, io.EOF) instead of string comparison
Replace brittle err.Error() == "EOF" string comparison with idiomatic
errors.Is(err, io.EOF) for checking stream end in bucket listing.
* fix: address PR review findings for bucket pagination
- Clamp page to totalPages when page exceeds total, preventing empty
results with misleading pagination state
- Fix sort comparator to use explicit ascending/descending comparisons
with a name tie-breaker, satisfying strict weak ordering for sort.Slice
- Capture SnapshotTsNs from first ListEntries response and pass it to
subsequent requests for consistent pagination across pages
- Replace non-focusable <th onclick> sort headers with <a> tags and
reuse getSortIcon, matching the cluster_volumes accessibility pattern
- Change exportBucketList() to fetch all buckets from /api/s3/buckets
instead of scraping DOM rows (which now only contain the current page)
* refactor: Convert versioning to three-state string model matching AWS S3
- Change VersioningEnabled bool to VersioningStatus string in S3Bucket struct
- Add GetVersioningStatus() function returning empty string (never enabled), 'Enabled', or 'Suspended'
- Update StoreVersioningInExtended() to delete key instead of setting 'Suspended'
- Ensures Admin UI and S3 API use consistent versioning state representation
* fix: Add validation for bucket quota and Object Lock configuration
- Prevent buckets with quota enabled but size=0 (validation check)
- Fix Object Lock mode handling to only pass mode when setDefaultRetention is true
- Ensures proper extended attribute storage for Object Lock configuration
- Matches AWS S3 behavior for Object Lock setup
* feat: Handle versioned objects in bucket details view
- Recognize .versions directories as versioned objects in listBucketObjects()
- Extract size and mtime from extended attribute metadata (ExtLatestVersionSizeKey, ExtLatestVersionMtimeKey)
- Add length validation (8 bytes) before parsing extended attribute byte arrays
- Update GetBucketDetails() and GetS3Buckets() to use new GetVersioningStatus()
- Properly display versioned objects without .versions suffix in bucket details
* ui: Update bucket management UI to show three-state versioning and Object Lock
- Change versioning display from binary (Enabled/Disabled) to three-state (Not configured/Enabled/Suspended)
- Update Object Lock display to show 'Not configured' instead of 'Disabled'
- Fix bucket details modal to use bucket.versioning_status instead of bucket.versioning_enabled
- Update displayBucketDetails() JavaScript to handle three versioning states
* chore: Regenerate template code for bucket UI changes
- Generated from updated s3_buckets.templ
- Reflects three-state versioning and Object Lock UI improvements
* shell: add -owner flag to s3.bucket.create command
This fixes an issue where buckets created via weed shell cannot be accessed
by non-admin S3 users because the bucket has no owner set.
When using S3 IAM authentication, non-admin users can only access buckets
they own. Buckets created via lazy S3 creation automatically have their
owner set from the request context, but buckets created via weed shell
had no owner, making them inaccessible to non-admin users.
The new -owner flag allows setting the bucket owner identity (s3-identity-id)
at creation time:
s3.bucket.create -name my-bucket -owner my-identity-name
Fixes: https://github.com/seaweedfs/seaweedfs/discussions/7599
* shell: add s3.bucket.owner command to view/change bucket ownership
This command allows viewing and changing the owner of an S3 bucket,
making it easier to manage bucket access for IAM users.
Usage:
# View the current owner of a bucket
s3.bucket.owner -name my-bucket
# Set or change the owner of a bucket
s3.bucket.owner -name my-bucket -set -owner new-identity
# Remove the owner (make bucket admin-only)
s3.bucket.owner -name my-bucket -set -owner ""
* shell: show bucket owner in s3.bucket.list output
Display the bucket owner (s3-identity-id) when listing buckets,
making it easier to see which identity owns each bucket.
Example output:
my-bucket size:1024 chunk:5 owner:my-identity
* admin: add bucket owner support to admin UI
- Add Owner field to S3Bucket struct for displaying bucket ownership
- Add Owner field to CreateBucketRequest for setting owner at creation
- Add UpdateBucketOwner API endpoint (PUT /api/s3/buckets/:bucket/owner)
- Add SetBucketOwner function for updating bucket ownership
- Update GetS3Buckets to populate owner from s3-identity-id extended attribute
- Update CreateS3BucketWithObjectLock to set owner when creating bucket
This allows the admin UI to display bucket owners and supports creating/
editing bucket ownership, which is essential for S3 IAM authentication
where non-admin users can only access buckets they own.
* admin: show bucket owner in buckets list and create form
- Add Owner column to buckets table to display bucket ownership
- Add Owner field to create bucket form for setting owner at creation
- Show owner in bucket details modal
- Update JavaScript to include owner when creating buckets
This makes bucket ownership visible and configurable from the admin UI,
which is essential for S3 IAM authentication where non-admin users can
only access buckets they own.
* admin: add bucket owner management with user dropdown
- Add 'Manage Owner' button to bucket actions
- Add modal with dropdown to select owner from existing users
- Fetch users from /api/users endpoint to populate dropdown
- Update create bucket form to use dropdown for owner selection
- Allow setting owner to empty (no owner = admin-only access)
This provides a user-friendly way to manage bucket ownership by selecting
from existing S3 identities rather than manually typing identity names.
* fix: use username instead of name for user dropdown
The /api/users endpoint returns 'username' field, not 'name'.
Fixed both the manage owner modal and create bucket form.
* Update s3_buckets_templ.go
* fix: address code review feedback for s3.bucket.create
- Check if entry.Extended is nil before making a new map to prevent
overwriting any previously set extended attributes
- Use fmt.Fprintln(writer, ...) instead of println() for consistent
output handling across the shell command framework
* fix: improve help text and validate owner input
- Add note that -owner value should match identity name in s3.json
- Trim whitespace from owner and treat whitespace-only as empty
* fix: address code review feedback for list and owner commands
- s3.bucket.list: Use %q to escape owner value and prevent malformed
tabular output from special characters (tabs/newlines/control chars)
- s3.bucket.owner: Use neutral error message for lookup failures since
they can occur for reasons other than missing bucket (e.g., permission)
* fix: improve s3.bucket.owner CLI UX
- Remove confusing -set flag that was required but not shown in examples
- Add explicit -delete flag to remove owner (safer than empty string)
- Presence of -owner now implies set operation (no extra flag needed)
- Validate that -owner and -delete cannot be used together
- Trim whitespace from owner value
- Update help text with correct examples and add note about identity name
- Clearer success messages for each operation
* fix: address code review feedback for admin UI
- GetBucketDetails: Extract and return owner from extended attributes
- CSV export: Fix column indices after adding Owner column, add Owner to header
- XSS prevention: Add escapeHtml() function to sanitize user data in innerHTML
(bucket.name, bucket.owner, bucket.object_lock_mode, obj.key, obj.storage_class)
* fix: address additional code review feedback
- types.go: Add omitempty to Owner JSON tag, update comment
- bucket_management.go: Trim and validate owner (max 256 chars) in CreateBucket
- bucket_management.go: Use neutral error message in SetBucketOwner lookup
* fix: improve owner field handling and error recovery
bucket_management.go:
- Use *string pointer for Owner to detect if field was explicitly provided
- Return HTTP 400 if owner field is missing (use empty string to clear)
- Trim and validate owner (max 256 chars) in UpdateBucketOwner
s3_buckets.templ:
- Re-enable owner select dropdown on fetch error
- Reset dropdown to default 'No owner' option on error
- Allow users to retry or continue without selecting an owner
* fix: move modal instance variables to global scope
Move deleteModalInstance, quotaModalInstance, ownerModalInstance,
detailsModalInstance, and cachedUsers to global scope so they are
accessible from both DOMContentLoaded handlers and global functions
like deleteBucket(). This fixes the undefined variable issue.
* refactor: improve modal handling and avoid global window properties
- Initialize modal instances once on DOMContentLoaded and reuse with show()
- Replace window.currentBucket* global properties with data attributes on forms
- Remove modal dispose/recreate pattern and unnecessary cleanup code
- Scope state to relevant DOM elements instead of global namespace
* Update s3_buckets_templ.go
* fix: define MaxOwnerNameLength constant and implement RFC 4180 CSV escaping
bucket_management.go:
- Add MaxOwnerNameLength constant (256) with documentation
- Replace magic number 256 with constant in both validation checks
s3_buckets.templ:
- Add escapeCsvField() helper for RFC 4180 compliant CSV escaping
- Properly handle commas, double quotes, and newlines in field values
- Escape internal quotes by doubling them (")→("")
* Update s3_buckets_templ.go
* refactor: use direct gRPC client methods for consistency
- command_s3_bucket_create.go: Use client.CreateEntry instead of filer_pb.CreateEntry
- command_s3_bucket_owner.go: Use client.LookupDirectoryEntry instead of filer_pb.LookupEntry
- command_s3_bucket_owner.go: Use client.UpdateEntry instead of filer_pb.UpdateEntry
This aligns with the pattern used in weed/admin/dash/bucket_management.go
* add a menu item "Message Queue"
* add a menu item "Message Queue"
* move the "brokers" link under it.
* add "topics", "subscribers". Add pages for them.
* refactor
* show topic details
* admin display publisher and subscriber info
* remove publisher and subscribers from the topic row pull down
* collecting more stats from publishers and subscribers
* fix layout
* fix publisher name
* add local listeners for mq broker and agent
* render consumer group offsets
* remove subscribers from left menu
* topic with retention
* support editing topic retention
* show retention when listing topics
* create bucket
* Update s3_buckets_templ.go
* embed the static assets into the binary
fix https://github.com/seaweedfs/seaweedfs/issues/6964