3 Commits

Include renames

Author	SHA1	Message	Date
Chris Lu	532b088262	fix(ec): preserve source disk type across EC encoding (#9423) (#9449) ... * fix(ec): carry source disk type on VolumeEcShardsMount (#9423) When EC shards land on a target whose disk type differs from the source volume's, master heartbeats wrongly reported under the target disk's type. Add source_disk_type to VolumeEcShardsMountRequest; the target server applies it to the in-memory EcVolume via SetDiskType so the mount notification and steady-state heartbeat both carry the source's disk type. Empty value falls back to the location's disk type (used by disk-scan reload paths). The override is not persisted with the volume — disk type stays an environmental property and .vif remains portable. * fix(ec): plumb source disk type through plugin worker (#9423) Add source_disk_type to ErasureCodingTaskParams (field 8; 7 reserved), populate it from the metric the detector already collects, thread it through ec_task into the MountEcShards helper, and forward it on the VolumeEcShardsMount RPC. * fix(ec): mirror source disk type plumbing in rust volume server (#9423) The volume_ec_shards_mount handler now forwards source_disk_type into mount_ec_shard → DiskLocation::mount_ec_shards. When non-empty it overrides ec_vol.disk_type (and each mounted shard's disk_type) via the new set_disk_type method; empty value keeps the location's disk type, so disk-scan reload and reconcile paths are unchanged. Also picks up two pre-existing proto drifts that 'make gen' synced from weed/pb (LockRingUpdate in master.proto, listing_cache_ttl_seconds in remote.proto). * feat(ec): bias placement toward preferred disk type (#9423) Add DiskCandidate.DiskType and PlacementRequest.PreferredDiskType. When PreferredDiskType is non-empty, SelectDestinations partitions suitable disks into matching/fallback tiers and runs the rack/server/ disk-diversity passes on the matching tier first; the fallback tier is only consulted if the matching pool can't satisfy ShardsNeeded. PlacementResult.SpilledToOtherDiskType lets callers warn on spillover. Empty PreferredDiskType keeps the existing single-pool behavior. * fix(ec): plumb source disk type into placement planner (#9423) diskInfosToCandidates now copies DiskInfo.DiskType into the placement candidate, and ecPlacementPlanner.selectDestinations forwards metric.DiskType as PreferredDiskType so EC shards land on disks matching the source volume's disk type when possible. A glog warning fires when placement had to spill to other disk types. * test(ec): integration coverage for source-disk-type plumbing (#9423) store_ec_disk_type_test exercises Store.MountEcShards end-to-end: a shard physically lives on an HDD location, MountEcShards is called with sourceDiskType="ssd", and the test asserts that the in-memory EcVolume, the mounted shard, the NewEcShardsChan notification, and the steady-state heartbeat all report under the source's disk type. A companion test pins the empty-source path so disk-scan reload keeps the location's disk type. detection_disk_type_test exercises the worker plumbing: with a cluster of nodes carrying both HDD and SSD disks, planECDestinations must place every shard on SSD when metric.DiskType="ssd"; with only one SSD node and 13 HDD nodes it must still satisfy a 10+4 layout via spillover (and log a warning). * revert(ec): drop unrelated proto drift in seaweed-volume/proto (#9423) make gen pulled two pre-existing OSS changes into the rust proto tree (LockRingUpdate / by_plugin in master.proto, listing_cache_ttl_seconds in remote.proto). Reviewers flagged it as scope creep — none of the rust EC fix references those fields. Restore both files to origin/master so this branch only touches EC-related symbols. * fix(ec placement): treat empty disk type as hdd and skip used racks on spill (#9423) partitionByDiskType used raw string comparison, so a PreferredDiskType of "hdd" never matched candidates whose DiskType is "" (the HardDriveType sentinel that weed/storage/types uses). EC encoding of an HDD source would spill onto any HDD reporting "" even when the cluster has plenty of matching capacity. Normalize both sides through normalizeDiskType, which lowercases and folds "" → "hdd", mirroring types.ToDiskType without taking a dependency on it. selectFromTier's rack-diversity pass also kept revisiting racks the preferred tier had already used when running on the fallback tier, which negated PreferDifferentRacks on spillover. Skip racks already in usedRacks so fallback placements still spread onto new racks. * fix(ec): empty-source remount must not clobber existing disk type (#9423) mount_ec_shards_with_idx_dir runs more than once per vid (RPC mount, disk-scan reload, orphan-shard reconcile). After an RPC sets the source-derived disk type, any later call passing source_disk_type="" was resetting ec_vol.disk_type back to the location's value, which reintroduces the heartbeat drift this PR is meant to fix. Only default to the location's disk type when the EC volume is fresh (no shards mounted yet); otherwise leave the recorded type alone so empty-source reloads preserve whatever the original mount RPC set.	2026-05-11 20:21:50 -07:00
Chris Lu	c4e1885053	fix(ec): honor disk_id in ReceiveFile so EC shards respect admin placement (#9184) (#9185) ... * test(volume_server): reproduce #9184 EC ReceiveFile disk-placement bug The plugin-worker EC task sends shards via ReceiveFile, which picks Locations[0] as the target directory regardless of the admin planner's TargetDisk assignment. ReceiveFileInfo has no disk_id field, so there is no wire channel to honor the plan. Adds StartSingleVolumeClusterWithDataDirs to the integration framework so tests can launch a volume server with N data directories. The new repro asserts the current (buggy) behavior: sending three distinct EC shards via ReceiveFile leaves all three files in dir[0] and the other dirs empty. When the fix adds disk_id to ReceiveFileInfo, this assertion must flip to verify the planned placement is respected. * fix(ec): honor disk_id in ReceiveFile so EC shards respect admin placement Before this change, VolumeServer.ReceiveFile for EC shards always selected the first HDD location (Locations[0]). The plugin-worker EC task had no way to pass the admin planner's per-shard disk assignment — ReceiveFileInfo carried no disk_id field — so every received EC shard piled onto a single disk per destination server. On multi-disk servers this caused uneven load (one disk absorbing all EC shard I/O), frequent ENOSPC retries, and a growing EC backlog under sustained ingest (see issue #9184). Changes: - proto: add disk_id to ReceiveFileInfo, mirroring VolumeEcShardsCopyRequest.disk_id. - worker: DistributeEcShards tracks the planner-assigned disk per shard; sendShardFileToDestination forwards that disk id. Metadata files (ecx/ecj/vif) inherit the disk of the first data shard targeting the same node so they land next to the shards. - server: ReceiveFile honors disk_id when > 0 with bounds validation; disk_id=0 (unset) falls back to the same auto-selection pattern as VolumeEcShardsCopy (prefer disk that already has shards for this volume, then any HDD with free space, then any location with free space). Tests updated: - TestReceiveFileEcShardHonorsDiskID asserts three shards sent with disk_id={1,2,0} land on data dirs 1, 2, and 0 respectively. - TestReceiveFileEcShardRejectsInvalidDiskID pins the out-of-range disk_id rejection path. * fix(volume-rust): honor disk_id in ReceiveFile for EC shards Mirror the Go-side change: when disk_id > 0 place the EC shard on the requested disk; when unset, auto-select with the same preference order as volume_ec_shards_copy (disk already holding shards, then any HDD, then any disk). * fix(volume): compare disk_id as uint32 to avoid 32-bit overflow On 32-bit Go builds `int(fileInfo.DiskId) >= len(Locations)` can wrap a high-bit uint32 to a negative int, bypassing the bounds check before the index operation. Compare in the uint32 domain instead. * test(ec): fail invalid-disk_id test on transport error Previously a transport-level error from CloseAndRecv silently passed the test by returning early, masking any real gRPC failure. Fail loudly so only the structured ReceiveFileResponse rejection path counts as a pass. * docs(test): explain why DiskId=0 auto-selects dir 0 in EC placement test Documents the load-bearing assumption that shards are never mounted in this test, so loc.FindEcVolume always returns false and auto-select falls through to the first HDD. Saves future readers from re-deriving the expected directory for the DiskId=0 case. * fix(test): preserve baseDir/volume path for single-dir clusters StartSingleVolumeClusterWithDataDirs started naming the data directory volume0 even in the dataDirCount=1 case, which broke Scrub tests that reach into baseDir/volume via CorruptDatFile / CorruptEcShardFile / CorruptEcxFile. Keep the legacy name for single-dir clusters; only use the indexed "volumeN" layout when multiple disks are requested.	2026-04-22 10:30:13 -07:00
Chris Lu	7354fa87f1	refactor ec shard distribution (#8465) ... * refactor ec shard distribution * fix shard assignment merge and mount errors * fix mount error aggregation scope * make WithFields compatible and wrap errors	2026-02-27 17:21:13 -08:00