* fix(filer): apply -filer.disk default to metadata log assigns
Metadata event log writes call operation.Assign directly and used only
FilerConf path rule DiskType. When filer.conf rules were missing or
unmatched, the master received an empty DiskType and grew volumes on the
built-in hdd layout.
Mirror resolveAssignStorageOption: wire FilerOption.DiskType into the
Filer, fall back when the matched path rule has no disk type, and return
the matched rule from resolveMetadataLogAssignDiskType to avoid duplicate
MatchStorageRule lookups.
Co-authored-by: Cursor <cursoragent@cursor.com>
* mini: fall back to -volume.disk for filer default disk type
weed server copies -volume.disk into the filer disk default when
-filer.disk is unset; weed mini did not, so metadata-log assigns sent
an empty disk type on clusters that only tag volumes (e.g. hot/warm).
---------
Co-authored-by: Cursor <cursoragent@cursor.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
CreateEntry starts with a FindEntry to load the current entry. A conditional
CreateEntry already fetched that entry to evaluate the precondition under the
per-path lock, so the create repeated the lookup.
Add an existing *Entry parameter: when non-nil it is used as the current entry
and the internal lookup is skipped; nil keeps the lookup. The gRPC CreateEntry
handler passes the entry it fetched for the precondition, removing the redundant
read while the lock is held. All other callers pass nil.
* fix(mount): remove fid pool to stop master over-allocating volumes
The writeback-cache fid pool pre-allocated file IDs with
ExpectedDataSize = ChunkSizeLimit (typically 8+ MB). The master's
PickForWrite charges count * expectedDataSize against the volume's
effectiveSize, so a full pool refill could charge hundreds of MB
against a single volume before any bytes were actually written.
That tripped RecordAssign's hard-limit path and eagerly removed
volumes from writable, causing the master to grow new volumes
even when the real data being written was tiny.
Drop the pool entirely. Every chunk upload goes through
UploadWithRetry -> AssignVolume with no ExpectedDataSize hint,
letting the master fall back to the 1 MB default estimate. The
mount->filer grpc connection is already cached in pb.WithGrpcClient
(non-streaming mode), so per-chunk AssignVolume is a unary RPC
over an existing HTTP/2 stream, not a full dial. Path-based
filer.conf storage rules now apply to mount chunk assigns again,
which the pool had to skip.
Also remove the now-unused operation.UploadWithAssignFunc and its
AssignFunc type.
* fix(upload): populate ExpectedDataSize from actual chunk bytes
UploadWithRetry already buffers the full chunk into `data` before
calling AssignVolume, so the real size is known. Previously the
assign request went out with ExpectedDataSize=0, making the master
fall back to the 1 MB DefaultNeedleSizeEstimate per fid — same
over-reservation symptom the pool had, just smaller per call.
Stamp ExpectedDataSize = len(data) before the assign RPC when the
caller hasn't already set it. This covers mount chunk uploads,
filer_copy, filersink, mq/logstore, broker_write, gateway_upload,
and nfs — all the UploadWithRetry paths.
* fix(assign): pass real ExpectedDataSize at every assign call site
After removing the mount fid pool, per-chunk AssignVolume calls went
out with ExpectedDataSize=0, making the master fall back to its 1 MB
DefaultNeedleSizeEstimate. That's still an over-estimate for small
writes. Thread the real payload size through every remaining assign
site so RecordAssign charges effectiveSize accurately and stops
prematurely marking volumes full.
- filer: assignNewFileInfo now takes expectedDataSize and stamps it
on both primary and alternate VolumeAssignRequests. Callers pass:
- SSE data-to-chunk: len(data)
- copy manifest save: len(data)
- streamCopyChunk: srcChunk.Size
- TUS sub-chunk: bytes read
- saveAsChunk (autochunk/manifestize): 0 (small, size unknown
until the reader is drained; master uses 1 MB default)
- filer gRPC remote fetch-and-write: ExpectedDataSize = chunkSize
after the adaptive chunkSize is computed.
- ChunkedUploadOption.AssignFunc gains an expectedDataSize parameter;
upload_chunked.go passes the buffered dataSize at the call site.
S3 PUT assignFunc stamps it on the AssignVolumeRequest.
- S3 copy: assignNewVolume / prepareChunkCopy take expectedDataSize;
all seven call sites pass the source chunk's Size.
- operation.SubmitFiles / FilePart.Upload: derive per-fid size from
FileSize (average for batched requests, real per-chunk size for
sequential chunk assigns).
- benchmark: pass fileSize.
- filer append-to-file: pass len(data).
* fix(assign): thread size through SaveDataAsChunkFunctionType
The saveAsChunk path (autochunk, filer_copy, webdav, mount) ran
AssignVolume before the reader was drained, so it had to pass
ExpectedDataSize=0 and fall back to the master's 1 MB default.
Add an expectedDataSize parameter to SaveDataAsChunkFunctionType.
- mergeIntoManifest already has the serialized manifest bytes, so
it passes uint64(len(data)) directly.
- Mount's saveDataAsChunk ignores the parameter because it uses
UploadWithRetry, which already stamps len(data) on the assign
after reading the payload.
- webdav and filer_copy saveDataAsChunk follow the same UploadWithRetry
path and also ignore the hint.
- Filer's saveAsChunk (used for manifestize) plumbs the value to
assignNewFileInfo so manifest-chunk assigns get a real size.
Callers of saveFunc-as-value (weedfs_file_sync, dirty_pages_chunked)
pass the chunk size they're about to upload.
When writing metadata logs to /topics/.system/log, the filer was not
respecting the disk type configuration from path-specific rules
(fs.configure). This caused volume assignment failures when volume
servers used a specific disk type (e.g., "ssd") because the assign
request defaulted to empty disk type.
The fix adds DiskType to the VolumeAssignRequest in the filer's
metadata log write path, ensuring that path-specific disk type
configurations are properly honored for internal system writes.
Fixes errors like:
"metadata log write failed /topics/.system/log/...: AssignVolume:
failed to find writable volumes for collection"
Signed-off-by: Charles Darke <s.cduk@toodevious.com>
Co-authored-by: Charles Darke <s.cduk@toodevious.com>
* Added global http client
* Added Do func for global http client
* Changed the code to use the global http client
* Fix http client in volume uploader
* Fixed pkg name
* Fixed http util funcs
* Fixed http client for bench_filer_upload
* Fixed http client for stress_filer_upload
* Fixed http client for filer_server_handlers_proxy
* Fixed http client for command_fs_merge_volumes
* Fixed http client for command_fs_merge_volumes and command_volume_fsck
* Fixed http client for s3api_server
* Added init global client for main funcs
* Rename global_client to client
* Changed:
- fixed NewHttpClient;
- added CheckIsHttpsClientEnabled func
- updated security.toml in scaffold
* Reduce the visibility of some functions in the util/http/client pkg
* Added the loadSecurityConfig function
* Use util.LoadSecurityConfiguration() in NewHttpClient func
* fix: disallow file name too long when writing a file
* bool LongerName to MaxFilenameLength
---------
Co-authored-by: Konstantin Lebedev <9497591+kmlebedev@users.noreply.github.co>
* compare chunks by timestamp
* fix slab clearing error
* fix test compilation
* move oldest chunk to sealed, instead of by fullness
* lock on fh.entryViewCache
* remove verbose logs
* revert slat clearing
* less logs
* less logs
* track write and read by timestamp
* remove useless logic
* add entry lock on file handle release
* use mem chunk only, swap file chunk has problems
* comment out code that maybe used later
* add debug mode to compare data read and write
* more efficient readResolvedChunks with linked list
* small optimization
* fix test compilation
* minor fix on writer
* add SeparateGarbageChunks
* group chunks into sections
* turn off debug mode
* fix tests
* fix tests
* tmp enable swap file chunk
* Revert "tmp enable swap file chunk"
This reverts commit 985137ec47.
* simple refactoring
* simple refactoring
* do not re-use swap file chunk. Sealed chunks should not be re-used.
* comment out debugging facilities
* either mem chunk or swap file chunk is fine now
* remove orderedMutex as *semaphore.Weighted
not found impactful
* optimize size calculation for changing large files
* optimize performance to avoid going through the long list of chunks
* still problems with swap file chunk
* rename
* tiny optimization
* swap file chunk save only successfully read data
* fix
* enable both mem and swap file chunk
* resolve chunks with range
* rename
* fix chunk interval list
* also change file handle chunk group when adding chunks
* pick in-active chunk with time-decayed counter
* fix compilation
* avoid nil with empty fh.entry
* refactoring
* rename
* rename
* refactor visible intervals to *list.List
* refactor chunkViews to *list.List
* add IntervalList for generic interval list
* change visible interval to use IntervalList in generics
* cahnge chunkViews to *IntervalList[*ChunkView]
* use NewFileChunkSection to create
* rename variables
* refactor
* fix renaming leftover
* renaming
* renaming
* add insert interval
* interval list adds lock
* incrementally add chunks to readers
Fixes:
1. set start and stop offset for the value object
2. clone the value object
3. use pointer instead of copy-by-value when passing to interval.Value
4. use insert interval since adding chunk could be out of order
* fix tests compilation
* fix tests compilation
