14 Commits

Include renames

Author	SHA1	Message	Date
Chris Lu	47b491b53c	mount: version open file handles by filer log position (#10403) ... * filer: stamp a log position on lookup and remote-cache responses Metadata events are logged after their store write and stamped with the filer clock. Reading that clock before serving an entry therefore gives a timestamp with a causal guarantee: every event at or below it is reflected in the returned entry. Clients caching filer state can use it as the entry's version to order the response against subscription events, including events committed before the call but delivered after it. * mount: version open file handles by filer log position A subscription event refreshing an open handle did a second lookup; a transient failure left the handle pinned to its old entry with no retry, since the subscription cursor had already advanced. The deeper problem is ordering: the handle is a cache written by three unordered channels — the async invalidation worker, local mutation acks, and open-time lookups — and overwriting cached state safely requires knowing which write is newer. The filer log timestamp is that order, and it now travels with every value instead of being derived out of band. Events carry it natively; lookup and remote-cache responses carry the log position stamped before the serving read; mutation acks carry it in their returned event; and the local store pairs each read with a version cursor advanced under the same lock as the store write. Each handle records the version its entry reflects, and one rule replaces the per-site reasoning: state at or below the handle's version is old news and must not be installed. The invalidation itself applies the event's own entry — no lookup, so no transient-failure window — except under a cached parent, where the store entry is the ordered merge of the event and anything applied since, and its version outranks the event's. An uncached parent receives no store writes, so a hit there would be a stale leftover masking the event. A vacated path (delete, rename away) keeps the last entry so unlinked-but-open reads still work. Directory builds version the completed directory at the listing snapshot and re-invalidate buffered events at that version, since their mid-build refresh ran against an incomplete store. The tests replay every race this replaces machinery for: rollback of a newer local flush (queued, cached, and read-through), stale leftovers under uncached parents, the build window including abort, handles opened after an event was queued, events landing mid-lookup, and undelivered events at remote-cache time across a filer failover. * filer: serialize the log position fence with mutations, stamp mutation acks The fence stamped before an unlocked entry read could precede state the read returned: a mutation writes storage first and assigns its event timestamp only at notify time, so a lookup racing that window handed the mount an entry newer than its fence, and the event's later delivery looked like fresh news — destroying dirty pages for a change the handle already had. The mutation handlers already hold an exclusive per-path lock across read, write, and notify; the lookup and remote-cache reads now take it shared around the stamp and the read, making the fence exact: everything at or below it is in the entry, nothing above it is. A no-change update returns success without an event, leaving the mount nothing to fence with even though the response confirms current state. Create and update acks now carry a log position stamped under the same lock, and the mount falls back to it whenever the ack has no event. Also regenerate the VT marshalers, which the earlier generation missed: without them a VT round-trip silently zeroed every log position. * java: sync filer.proto * mount: scope store versions to what they vouch for; atomic handle install The store's version cursor claimed too much. Advanced by local mutation acks and directory listing snapshots, it inflated the version of store reads for unrelated paths whose events the subscription still owed, and those events were then fenced out permanently. The cursor now tracks subscription progress only — events arrive in log order, so everything at or below it has been delivered for every path — and a completed listing records its snapshot as a per-directory floor instead of a global claim. Local acks never touch it: they version their own handle directly. Buffered build events advance the cursor at delivery, since their store write may never happen (abort) while their invalidation is already queued; their read-through directory pairs no store read with it, and rename fragments are applied first. Concurrent first opens raced: a slower opener's older lookup could overwrite the newer entry a faster opener had installed, while the monotonic version kept the newer timestamp — an old entry fenced at a new version, immune to every correcting event. Entry and version are now installed as one decision under the handle map lock, and an install that does not outrank the handle's version is dropped. The remote-cache commit also escaped the fence: it wrote storage and notified without the path lock, so a lookup's shared-locked fence and read could land between the two and hand out the cached state under-versioned. The commit now re-reads and writes under the exclusive path lock, and backs off entirely when the entry changed during the download — the concurrent writer supersedes the cached content. * mount: floors gate store applies; installs respect handle users; renames join the fence A directory floor certifies the listing state as of its snapshot, but a delayed event at or below the floor was still applied to the store — rolling the content back to pre-snapshot state while the floor kept claiming the snapshot version, so the correcting events were fenced out of every future read. Events are now gated against the affected directory's floor, each half of a rename independently. Fences are lower bounds: a listing or lookup can include a mutation whose event has not been delivered yet, and that event later passes every gate carrying state the handle already holds. Such a re-delivery now advances the version without destroying dirty pages or reinstalling the entry — invalidating local writes over a no-op was the real damage in every remaining under-fence window, including the unlocked listing snapshot, which no per-path lock can serialize. The concurrent-open install moved from the map lock to the handle lock every reader, writer, and invalidation synchronizes on, and rejects what cannot improve the handle: dirty state (local writes would be lost), unversioned lookup responses (they cannot outrank anything, and two zero-version opens must not overwrite each other), and anything not strictly newer. New handles are still fully initialized before the map exposes them. Renames committed metadata and emitted events with no path lock, so a lookup could read the renamed state under a fence preceding its events. Both rename handlers now hold the source and destination locks, ordered by path, across commit and notification; descendants of a renamed directory are not individually locked and rely on the no-op re-delivery handling above. * mount: per-entry store versions replace the cursor and directory floors The store's aggregate versions — a global subscription cursor and per-directory listing floors — were versions at coarser granularity than the values they described, and every over-claiming bug in this series traced to that gap: an aggregate vouching for state its source never saw. Each store entry now carries the filer log position of the write that produced it — the event that applied it, or the listing snapshot that inserted it, recorded in the store's key-value space under the same lock as the entry write. The store becomes what the handle already is: a last-writer-wins register with one rule, install only what outranks the current claim. The cursor, the floors, their advancement rules, the pairing ordering constraint, and the floor gating all collapse into that rule. Applies are gated per entry, each half of a rename independently; an unversioned local write clears the claim its content no longer proves; version records lingering after a bulk folder wipe cannot fence a recreate, since a claim only blocks while its entry exists. Listing inserts are stamped at build completion, before the buffered replay so newer replayed events override the stamp. Filer side, the fence dance every versioned read must perform is now a single choke point, fencedFindEntry, so a future read RPC gets the lock-serialized stamp by construction rather than by convention. * mount: judge no-op re-deliveries against an immutable base, not the live entry The equal-state skip compared the incoming event to the live handle entry, but local writes mutate the live entry — size, timestamps, chunks — so a delayed event re-delivering the base the handle was opened with no longer matched, and the installer destroyed the dirty pages and rolled the entry back over nothing new. The handle now keeps an immutable snapshot of the filer state it last installed or acknowledged, refreshed at every install and mutation ack (flush acks snapshot the request entry before the id mapping mutates it), and the no-op judgment runs against that base: an event carrying the base brings nothing, whatever the live entry has diverged to since. * mount: tombstones for versioned deletes, absence floors, copy enrollment Four gaps in the per-entry version protocol, all the same shape: a versioned fact with nothing carrying its version. A deletion is a fact about a path with no entry left to hold it — clearing the record let a delayed older event resurrect the deleted path, permanently, since the deletion's own redelivery is dedup-suppressed. Versioned deletes now leave a tombstone record that fences without an entry; renames tombstone their source the same way. Plain records still only block while their entry exists, so records lingering after a bulk folder wipe cannot fence a recreate. A completed listing proves absences as well as presences: a name it omitted was deleted as of the snapshot, and a delayed create below the snapshot re-creates it. The snapshot is kept per directory strictly as an absence fence, consulted only when a path has neither an entry nor a version record — present entries carry their own versions and never touch it, which is what separates this from the over-claiming floor it replaces. A rebuild against a pre-upgrade filer returns no snapshot; stamping now clears the children's records in that case, so a reinserted entry cannot reactivate the stale claim its previous incarnation left behind and reject valid events below it. Server-side copies installed the copied entry without enrolling in the base protocol, so the copy's own event differed from the stale pre-copy base and destroyed writes made to the destination after the copy. The install now refreshes the base and takes its version from the fenced readback. * mount: deletion facts outlive the cache's knowledge of the entry A versioned delete of a path the store held no entry for recorded nothing, so a delayed older event recreated the path — permanently, with the deletion's redelivery dedup-suppressed. The tombstone is now written whenever a versioned event vacates a path: the deletion is a fact about the path, not about what this cache happened to hold. For an absent entry, the listing's absence floor now speaks whatever older record remains: a tombstone at one position does not exhaust what is known about the path when a newer snapshot has confirmed the name still absent, and an event between the two was slipping past both. A committed copy whose readback failed installed a synthesized base with local timestamps; the copy's real event legitimately differs from it, and was read as foreign state — destroying writes made to the destination after the copy. The handle now marks that its own event is en route and adopts that event's state as the base without touching the live entry or the dirty pages; the adoption is one-shot, so a genuinely foreign event still invalidates. * mount: authoritative acks cancel pending event adoption; tombstones scoped and pruned The copy-event adoption flag could outlive its purpose: a flush after the failed readback installs a newer base and advances the version, the copy's own event is then version gated without consuming the flag, and the next genuinely foreign event was silently adopted — base advanced, live entry and dirty pages untouched — leaving the mount to later overwrite that remote change. Every local acknowledgment now installs its base through one helper that also cancels any pending adoption: the ack supersedes the mutation the adoption was waiting for. Tombstones were written for every versioned delete under the mount and survived directory eviction by design, growing LevelDB with historical deletions on delete-heavy mounts. They are now scoped to directories whose cached state the fence actually protects — an uncached parent never serves from the store nor applies the resurrecting insert — and a completed listing prunes the direct-child tombstones its absence floor supersedes, leaving only those above the snapshot. The store gains a key-prefix visitor for the sweep. * mount: acked saves install their value; trailer snapshots; direct-child prune range A version must never advance without its value. saveEntry stamped any open handle with the acknowledgment's version, but a handle opened while the save was in flight holds the pre-mutation entry — stamping it fenced out the events carrying the state it lacked, permanently, with the local apply performing no invalidation and the redelivery deduplicated. The acknowledged entry is now installed together with its version, through the same guarded install the racing-open path uses: under the handle lock, only when it outranks the handle, never over dirty local writes. Empty listings return no in-band snapshot — a snapshot-only response would be read as an entry by older consumers — so directories that end empty gained no absence floor and their tombstones were never pruned. The filer now sends the snapshot in the stream trailer, which older clients ignore, and the client reads it when no in-band snapshot arrived. Empty directories get real floors, their tombstones prune, and their buffered replays gain the snapshot filter instead of the replay-all fallback. Version records now encode the parent directory and name separated by a NUL, making a directory's direct children one contiguous key range: the tombstone prune scans exactly them under the cache lock, instead of walking every descendant record — the whole store, for root. * mount: fix dirty-page loss, uid/gid base, download race, copy adopt, leak; dedup Correctness fixes from the versioned-invalidation review: - A foreign delete/rename-away of a file held open with unflushed local writes destroyed the dirty pages unconditionally. A process may keep writing to an unlinked-but-open file and those writes were already acknowledged; preserve the pages when the handle is dirty. - downloadRemoteEntry stored the handle's base with filer-side uid/gid while every candidate it is later compared against is in local form, so under a non-identity UidGidMapper an unchanged re-delivery looked foreign and force-destroyed dirty pages. Map the base to local. - downloadRemoteEntry wrote the entry/base/version triple under only the handle's shared lock, so two concurrent reads of the same remote-only file could tear it. Serialize the install with a dedicated mutex (invalidation is already excluded by the exclusive handle lock). - A committed server-side copy whose readback failed adopted the FIRST event past the version gate as its base; a foreign write delivered first was silently swallowed. Adopt only an event whose content matches the synthesized base — the copy's own event — and install any other normally. - The deferred-create path relied on AcquireFileHandle installing the passed entry on a pre-existing handle, which the version rework dropped. Restore that install in the compat wrapper; the versioned open path keeps its gated install. Growth and hot-path cost: - Per-entry version records and tombstones leaked when a directory was evicted or read-through without a rebuild. An uncached directory gates its own inserts, so its records fence nothing; clear a directory's child version records when it is wiped for eviction. - FindEntry paid for the version KvGet on every lookup/getattr cache hit and threw it away. FindEntry now reads only the entry; the hot lookupEntry cache-hit path skips the version entirely. Cleanups: - Extract ackVersionTsNs over the shared response interface, replacing the metadata-event-else-log-ts snippet copy-pasted at four ack sites. - Extract acquireRenamePathLocks, replacing the verbatim sorted two-path lock fence in both rename handlers. * mount: no resurrection on foreign delete, version no-event acks, gate downloads, tighten copy adopt Follow-ups to the review patches: - Preserving dirty pages on a foreign delete let the next flush pass the isDeleted guard and CreateEntry, resurrecting the remotely-unlinked name. Mark the handle deleted in the vacate branch: the open fd can still read its buffered writes, but a flush no longer recreates the file. - A no-event acknowledgment (log fence only) synthesized a metadata event with TsNs 0, so the cache stored the entry unversioned and an older subscriber event rolled it back. Stamp the synthesized event with the ack's log position at all four ack sites. - downloadRemoteEntry serialized its install but did not check the version, so an older response arriving last overwrote the entry/base while the monotonic version kept the newer value, fencing corrections out. Install only when the response is at least as new as the handle. - sameEntryContent compared only size and chunks, so a foreign chmod with unchanged content was adopted as the copy's own event. Compare everything except server-assigned timestamps, so a metadata-only foreign change installs instead. * mount: trim comments to the non-obvious why The versioning work accumulated multi-line comment blocks restating what the code says. Keep the constraint a reader cannot derive — why a fence is exact, why a version must not advance without its value, why an uncached parent's records fence nothing — and drop the rest. * mount: distinguish rename from delete, tighten the download and adopt gates - A rename emits a nil old-path invalidation just like an unlink, so the vacate branch marked the handle deleted and later writes through the already-open descriptor were skipped instead of persisted. Carry the delete/rename distinction on the invalidation and mark only an actual delete. - The remote-download install accepted an unversioned response regardless of the handle's version, so during a rolling upgrade a delayed response could install stale content under a newer version. Require the response to be at least as new, with one exception: a handle still lacking local chunks takes the content anyway — it cannot read without it — but does not claim the response's log position. - Copy-event adoption returned without installing, so a foreign touch arriving before the copy's own event lost its timestamps. Content is unchanged either way, so the dirty pages stay valid; a clean handle now takes the entry, while a dirty one keeps its diverged version. * mount: one directory floor instead of a record per child; agree on TTL Review feedback: - Build completion wrote one KV record per direct child inside the cache write lock, so a large directory stalled every other cache operation for O(children) store writes. The directory's listing snapshot already covers every child it saw; make that floor the version for any child without a record of its own, and a child earns a record only when a later event touches it. One map write per build replaces the per-child writes, with the same fencing. - The presence probe read the store directly and so counted a TTL-expired entry as present, judging the path by a record describing content that has logically vanished. It now applies the same expiry the read path does, and an expired path falls back to its directory floor. - Preserve ErrNotFound identity when the commit-time re-read finds the object deleted, so callers still surface a 404. - Assert the rename-away source fence timestamp in the invalidation test. Also record the tombstone ceiling: distinct deleted names in a cached directory accumulate until it is rebuilt or evicted, which prunes everything at or below the new snapshot. * mount: pin the fence's clock domain instead of letting skew decide A log-position fence is stamped by one filer's clock under that filer's in-process lock, so comparing it to an event another filer logged is comparing two unrelated clocks. The two error directions are not equally costly: applying an event the fence already covered is a re-apply the base-equality check absorbs, while skipping one it does not cover leaves the handle holding exactly the state the event was meant to correct, with the subscription cursor already past it — the unhealable staleness this whole PR exists to remove. So refuse to guess. Fences now carry the signature of the filer that stamped them, and a handle records it alongside the position. An event is only fenced out when the filer that logged it is the one that stamped the fence — the logging filer appends its own signature, so its presence identifies the clock domain. Events from any other filer are applied. Positions taken from events keep comparing as before; the subscription already delivers those in order. The invalidation callback takes a struct now: it carries the path, entry, position, delete/rename distinction, and signatures, and was about to need a fifth positional parameter. * mount: follow a foreign rename; key page invalidation on content, not equality - A rename's old-path invalidation now carries the destination, and the handle follows the file there: an open fd tracks the inode, and leaving it on the old path made its next flush recreate that name instead of updating the renamed file. - Dirty pages overlay content, so only a content change invalidates them. Keying that on exact equality meant any timestamp-only event destroyed them, which the copy-adoption marker existed to paper over — a foreign touch could consume the marker and leave the copy's own event to drop the post-copy writes. Comparing content instead makes the marker unnecessary, so it is gone: a metadata-only event keeps the overlay, and a dirty handle keeps its diverged entry unless foreign content supersedes it. - A remote download response that is merely older is now refused even when the handle still lacks chunks; only an unversioned one is taken (and claims no position), since an older response's content predates what the handle reflects. - A refused or unversioned download no longer publishes to the metadata cache, where a zero-position event would clear the entry's version and let an older subscriber event roll the cache back. * mount: page invalidation keys on content alone; unversioned writes claim no position - sameEntryContent compared everything but timestamps, so a foreign chmod, chown, or xattr change counted as a content change and destroyed the dirty-page overlay. It was strict only to serve the copy-adoption marker, which is gone; its one caller now asks the question it actually needs — did the bytes change — so metadata-only events leave the overlay alone. - A rename over an existing file destroys that file, but its open handle was left live and still pointed at the name the renamed source now occupies, so its flush could overwrite it. MovePath already reports the displaced inode; mark that handle deleted. - An acknowledgment was refused whenever its position was numerically lower, even when a different filer stamped the fence it lost to. Two known, differing signatures mean unrelated clocks, so the comparison no longer applies there; unknown signatures still compare as before. - A local write with no log position behind it now records that explicitly instead of deleting its version record. Absence means the directory listing covers the path, which is why the snapshot floor applies; local content the listing never saw must not inherit it, or the events that would correct it are fenced out. * mount: widen the existing lookup functions instead of forking WithVersion twins The versioning work grew a parallel function for every accessor that needed to return a log position — lookupEntryWithVersion beside lookupEntry, maybeLoadEntryWithVersion beside maybeLoadEntry, FindEntryWithVersion beside FindEntry, AcquireFileHandleWithVersion beside AcquireFileHandle, advanceEntryVersion beside advanceEntryVersionTsNs, plus a getPbEntryWithVersion wrapper and an InsertListedEntriesForTest hook. Two names for one operation is two places to keep in step, and the split let callers pick the one that happened to compile. Each pair is now the single original name carrying the position, with callers that do not want it discarding it. filer_pb.GetEntry returns the fence its response already carried rather than a mount-side wrapper re-issuing the lookup, and InsertEntry takes the position its content reflects rather than a test-only twin that inserted without one. The one behavioural knot the merge exposed: AcquireFileHandle had been installing the entry on a pre-existing handle only in its unversioned form, which conflated 'the caller is authoritative' with 'the lookup had no version'. Deferred create is the only caller that means the former, so it now installs explicitly and the map function just acquires.	2026-07-23 17:44:02 -07:00
Chris Lu	ef109fe9e1	mount: don't hang close() when a writer is killed during flush (#10090) ... * operation: bound AssignVolume with a deadline AssignVolume ran on context.Background(), so when the filer is overwhelmed the RPC could block indefinitely and wedge every caller holding the connection. Give it a 30s deadline so a stuck assign fails and the caller's retry/error path runs instead of hanging forever. * mount: abort flush when the FUSE request is interrupted On close(), a killed process blocks in fuse_flush waiting for the mount to answer. doFlush ran its metadata CreateEntry on context.Background() and ignored the kernel interrupt channel, so against an overwhelmed filer the flush never completed and the process stayed in uninterruptible sleep -- making the pod un-killable. Derive a context from the FUSE cancel channel in Flush/Fsync and thread it through doFlush -> flushMetadataToFiler -> streamCreateEntry; the retry loop stops as soon as the context is cancelled. Release and the pre-rename flush keep a non-cancellable context since they must finish regardless. * operation: harden the AssignVolume timeout test Make the test double's signal send non-blocking and bound the receive with a timeout so a regression can't wedge the test instead of failing it.	2026-06-24 14:24:22 -07:00
Chris Lu	da2e90aefd	fix(mount): sanitize non-UTF-8 filenames; keep marshal errors per-request (#9207) ... * fix(mount): sanitize non-UTF-8 filenames; keep marshal errors per-request (#9139) A single file with invalid-UTF-8 bytes in its name (e.g. a GNOME Trash "partial" like \x10\x98=\\\x8a\x7f.trashinfo.9a51454f.partial) made every FUSE-initiated filer RPC fail with: rpc error: code = Internal desc = grpc: error while marshaling: string field contains invalid UTF-8 and then produced an avalanche of "connection is closing" errors on unrelated LookupEntry / ReadDirAll / UpdateEntry calls, causing the volume-server QPS dips reported in #9139. Root cause is twofold: 1. Proto3 `string` fields require valid UTF-8, but the FUSE kernel passes raw name bytes. Create/Mknod/Mkdir/Unlink/Rmdir/Rename/Lookup/Link/ Symlink all forwarded those bytes directly into CreateEntryRequest.Name, DeleteEntryRequest.Name, StreamRenameEntryRequest.{Old,New}Name and Entry.Name. saveDataAsChunk also copied the FullPath into AssignVolumeRequest.Path unchecked. 2. When the marshal failed, shouldInvalidateConnection treated the resulting codes.Internal as a connection problem and dropped the shared cached ClientConn — canceling every other in-flight RPC on it. Fix: - Add sanitizeFuseName (strings.ToValidUTF8 with '?' replacement, matching util.FullPath.DirAndName) and make checkName return the sanitized name. Apply at every FUSE entry point that passes a name to the filer RPC, including Unlink/Rmdir (which did not previously call checkName) and both oldName/newName in Rename. Add a backstop scrub for AssignVolumeRequest.Path so async flush paths cannot reintroduce invalid bytes from a pre-sanitization cached FullPath. - In weed/pb.shouldInvalidateConnection, detect client-side marshal errors via the gRPC library's "error while marshaling" prefix and return false: the connection is healthy, only the request is bad. Refs: https://github.com/seaweedfs/seaweedfs/issues/9139#issuecomment-4301184231 * fix(mount,util): use '_' for invalid-UTF-8 replacement (URL-safe) Sanitized filenames flow downstream into HTTP URLs (volume-server uploads, filer HTTP API, S3/WebDAV gateways). '?' is the URL query-string delimiter and would split the path the first time the name lands in one, so swap every invalid-UTF-8 replacement to '_'. This covers the two pre-existing sites in weed/util/fullpath.go as well, keeping all paths sanitized the same way. * refactor(pb): detect client-side marshal errors via errors.As, not substring Replace the raw `strings.Contains(err.Error(), ...)` check with a type-based carve-out: use errors.As against the `GRPCStatus() *Status` interface to pull the original Status out of any fmt.Errorf("...: %w") wrapping, then match the library-owned "grpc:" prefix on that Status's Message. Why not errors.Is against a proto-level sentinel: gRPC's encode() collapses the inner proto error with "%v" (stringification) before wrapping it in a Status, so the original error type does not survive into the caller. The Status itself is the structural signal that does survive. Why not status.FromError: when the caller wraps the Status error with fmt.Errorf("...: %w", ...), status.FromError rewrites Status.Message with the full err.Error() of the outermost wrapper, which defeats a prefix check on the library-owned message. errors.As gives us the original Status whose Message is still verbatim from the gRPC library. A new test asserts that a plain errors.New("grpc: error while marshaling: …") — i.e. the same text attached to something that is NOT a gRPC status — does not short-circuit invalidation, so we never silently keep a cached connection alive based on a coincidental substring match. * refactor(util): centralize UTF-8 sanitization; add FullPath.Sanitized Addresses review feedback on PR #9207. Nitpick: every invalid-UTF-8 replacement across the codebase (DirAndName, Name, mount.sanitizeFuseName, the weedfs_write.go backstop) now goes through a single util.SanitizeUTF8Name helper, so the replacement char ('_' — URL-safe) is chosen in one place. Outside-diff: three proto fields took raw FullPath strings that could break marshaling if an entry ever carried invalid UTF-8 (CreateEntryRequest.Directory in Mkdir, DeleteEntryRequest.Directory in Unlink, AssignVolumeRequest.Path in command_fs_merge_volumes). The reviewer's suggested fix — using DirAndName() — would have silently changed Directory from parent to grandparent, because DirAndName sanitizes only the trailing component. Added FullPath.Sanitized(), which scrubs every component, and applied it at the three sites. Exposure is narrow in practice (FUSE-boundary sanitization and the gRPC-side isClientSideMarshalError carve-out already cover the #9139 cascade), but the defense-in-depth is cheap and consistent with the existing AssignVolume backstop. New tests in weed/util/fullpath_test.go document: - SanitizeUTF8Name: valid UTF-8 passes through unchanged; invalid bytes become '_' (not '?', which is URL-special). - FullPath.Sanitized: scrubs bytes in any component, not just the last. - FullPath.DirAndName: dir remains raw on purpose — callers needing a clean full path must use Sanitized(). The test pins this behavior so it is not accidentally "fixed" in a way that changes the (dir, name) semantics callers depend on.	2026-04-23 19:17:35 -07:00
Chris Lu	f1d5f31a93	fix(mount): retry saveEntry on transient filer errors; stop mismapping Canceled to EIO (#9141) ... * fix(mount): retry saveEntry on transient filer errors, stop mismapping Canceled to EIO When the mount's gRPC connection to the filer flaps (e.g. a transient restart or network blip), every in-flight setattr/utimes/chmod/xattr/ rename-driven saveEntry returns "code = Canceled desc = grpc: the client connection is closing" at the same instant. Two bugs in saveEntry then turned each of those into a hard EIO for the user: 1. The error was wrapped with fmt.Errorf(... %v ...) before being passed to grpcErrorToFuseStatus. %v stringifies the status, so status.FromError could no longer unwrap the gRPC code and the Canceled→ETIMEDOUT branch in the classifier never fired; every Canceled error fell through to the default EIO. 2. saveEntry issued a single streamUpdateEntry call with no retry, unlike doFlush which already wraps its CreateEntry in retryMetadataFlush. One stream flap therefore propagated straight to the FUSE caller instead of being ridden out across the 4-attempt / ~7s backoff window. Wrap the UpdateEntry call in retryMetadataFlush (matching doFlush and completeAsyncFlush) and switch the wrap verb to %w so the classifier can still see the gRPC code. This recovers transient closes silently and, if retries are exhausted, returns ETIMEDOUT instead of EIO. Reported by rclone users in #9139 where a large concurrent copy (hundreds of .partial uploads per filer flap) surfaced as walls of EIOs because each .partial rename's post-setattr hit saveEntry at the worst possible moment. * mount: skip saveEntry retries on permanent filer errors Address gemini-code-assist review on #9141: blindly retrying every UpdateEntry failure with exponential backoff means interactive FUSE ops like chmod/utimes/xattr can hang for ~7s before surfacing clearly permanent errors (NotFound, PermissionDenied, InvalidArgument, etc.). Introduce retryMetadataFlushIf, a variant of retryMetadataFlush that accepts a shouldRetry predicate, and an isRetryableFilerError classifier that short-circuits on a conservative whitelist of terminal gRPC codes. Transient errors (Canceled / Unavailable / DeadlineExceeded / ResourceExhausted / Internal) and non-gRPC errors still retry, so the original fix for #9139 (rclone EIO burst during filer connection flaps) is preserved.	2026-04-20 00:31:37 -07:00
Chris Lu	bf31f404bc	test: add pjdfstest POSIX compliance suite (#9013) ... * test: add pjdfstest POSIX compliance suite Adds a script and CI workflow that runs the upstream pjdfstest POSIX compliance test suite against a SeaweedFS FUSE mount. The script starts a self-contained `weed mini` server, mounts the filesystem with `weed mount`, builds pjdfstest from source, and runs it under prove(1). * fix: address review feedback on pjdfstest setup - Use github.ref instead of github.head_ref in concurrency group so push events get a stable group key - Add explicit timeout check after filer readiness polling loop - Refresh pjdfstest checkout when PJDFSTEST_REPO or PJDFSTEST_REF are overridden instead of silently reusing stale sources * test: add Docker-based pjdfstest for faster iteration Adds a docker-compose setup that reuses the existing e2e image pattern: - master, volume, filer services from chrislusf/seaweedfs:e2e - mount service extended with pjdfstest baked in (Dockerfile extends e2e) - Tests run via `docker compose exec mount /run.sh` - CI workflow gains a parallel `pjdfstest (docker)` job This avoids building Go from scratch on each iteration — just rebuild the e2e image once and iterate on the compose stack. * fix: address second round of review feedback - Use mktemp for WORK_DIR so each run starts with a clean filer state - Pin PJDFSTEST_REF to immutable commit (03eb257) instead of master - Use cp -r instead of cp -a to avoid preserving ownership during setup * fix: address CI failure and third round of review feedback - Fix docker job: fall back to plain docker build when buildx cache export is not supported (default docker driver in some CI runners) - Use /healthz endpoint for filer healthcheck in docker-compose - Copy logs to a fixed path (/tmp/seaweedfs-pjdfstest-logs/) for reliable CI artifact upload when WORK_DIR is a mktemp path * fix(mount): improve POSIX compliance for FUSE mount Address several POSIX compliance gaps surfaced by the pjdfstest suite: 1. Filename length limit: reduce from 4096 to 255 bytes (NAME_MAX), returning ENAMETOOLONG for longer names. 2. SUID/SGID clearing on write: clear setuid/setgid bits when a non-root user writes to a file (POSIX requirement). 3. SUID/SGID clearing on chown: clear setuid/setgid bits when file ownership changes by a non-root user. 4. Sticky bit enforcement: add checkStickyBit helper and enforce it in Unlink, Rmdir, and Rename — only file owner, directory owner, or root may delete entries in sticky directories. 5. ctime (inode change time) tracking: add ctime field to the FuseAttributes protobuf message and filer.Attr struct. Update ctime on all metadata-modifying operations (SetAttr, Write/flush, Link, Create, Mkdir, Mknod, Symlink, Truncate). Fall back to mtime for backward compatibility when ctime is 0. * fix: add -T flag to docker compose exec for CI Disable TTY allocation in the pjdfstest docker job since GitHub Actions runners have no interactive TTY. * fix(mount): update parent directory mtime/ctime on entry changes POSIX requires that a directory's st_mtime and st_ctime be updated whenever entries are created or removed within it. Add touchDirMtimeCtime() helper and call it after: - mkdir, rmdir - create (including deferred creates), mknod, unlink - symlink, link - rename (both source and destination directories) This fixes pjdfstest failures in mkdir/00, mkfifo/00, mknod/00, mknod/11, open/00, symlink/00, link/00, and rmdir/00. * fix(mount): enforce sticky bit on destination directory during rename POSIX requires sticky-bit enforcement on both source and destination directories during rename. When the destination directory has the sticky bit set and a target entry already exists, only the file owner, directory owner, or root may replace it. * fix(mount): add in-memory atime tracking for POSIX compliance Track atime separately from mtime using a bounded in-memory map (capped at 8192 entries with random eviction). atime is not persisted to the filer — it's only kept in mount memory to satisfy POSIX stat requirements for utimensat and related syscalls. This fixes utimensat/00, utimensat/02, utimensat/04, utimensat/05, and utimensat/09 pjdfstest failures where atime was incorrectly aliased to mtime. * fix(mount): restore long filename support, fix permission checks - Restore 4096-byte filename limit (was incorrectly reduced to 255). SeaweedFS stores names as protobuf strings with no ext4-style constraint — the 255 limit is not applicable. - Fix AcquireHandle permission check to map filer uid/gid to local space before calling hasAccess, matching the pattern used in Access(). - Fix hasAccess fallback when supplementary group lookup fails: fall through to "other" permissions instead of requiring both group AND other to match, which was overly restrictive for non-existent UIDs. * fix(mount): fix permission checks and enforce NAME_MAX=255 - Fix AcquireHandle to map uid/gid from filer-space to local-space before calling hasAccess, consistent with the Access handler. - Fix hasAccess fallback when supplementary group lookup fails: use "other" permissions only instead of requiring both group AND other. - Enforce NAME_MAX=255 with a comment explaining the Linux FUSE kernel module's VFS-layer limit. Files >255 bytes can be created via direct FUSE protocol calls but can't be stat'd/chmod'd via normal syscalls. - Don't call touchDirMtimeCtime for deferred creates to avoid invalidating the just-cached entry via filer metadata events. * ci: mark pjdfstest steps as continue-on-error The pjdfstest suite has known failures (Linux FUSE NAME_MAX=255 limitation, hard link nlink/ctime tracking, nanosecond precision) that cannot be fixed in the mount layer. Mark the test steps as continue-on-error so the CI job reports results without blocking. * ci: increase pjdfstest bare metal timeout to 90 minutes * fix: use full commit hash for PJDFSTEST_REF in run.sh Short hashes cannot be resolved by git fetch --depth 1 on shallow clones. Use the full 40-char SHA. * test: add pjdfstest known failures skip list Add known_failures.txt listing 33 test files that cannot pass due to: - Linux FUSE kernel NAME_MAX=255 (26 files) - Hard link nlink/ctime tracking requiring filer changes (3 files) - Parent dir mtime on deferred create (1 file) - Directory rename permission edge case (1 file) - rmdir after hard link unlink (1 file) - Nanosecond timestamp precision (1 file) Both run.sh and run_inside_container.sh now skip these tests when running the full suite. Any failure in a non-skipped test will cause CI to fail, catching regressions immediately. Remove continue-on-error from CI steps since the skip list handles known failures. Result: 204 test files, 8380 tests, all passing. * ci: remove bare metal pjdfstest job, keep Docker only The bare metal job consistently gets stuck past its timeout due to weed processes not exiting cleanly. The Docker job covers the same tests reliably and runs faster.	2026-04-10 09:52:16 -07:00
Chris Lu	94bfa2b340	mount: stream all filer mutations over single ordered gRPC stream (#8770) ... * filer: add StreamMutateEntry bidi streaming RPC Add a bidirectional streaming RPC that carries all filer mutation types (create, update, delete, rename) over a single ordered stream. This eliminates per-request connection overhead for pipelined operations and guarantees mutation ordering within a stream. The server handler delegates each request to the existing unary handlers (CreateEntry, UpdateEntry, DeleteEntry) and uses a proxy stream adapter for rename operations to reuse StreamRenameEntry logic. The is_last field signals completion for multi-response operations (rename sends multiple events per request; create/update/delete always send exactly one response with is_last=true). * mount: add streaming mutation multiplexer (streamMutateMux) Implement a client-side multiplexer that routes all filer mutation RPCs (create, update, delete, rename) over a single bidirectional gRPC stream. Multiple goroutines submit requests through a send channel; a dedicated sendLoop serializes them on the stream; a recvLoop dispatches responses to waiting callers via per-request channels. Key features: - Lazy stream opening on first use - Automatic reconnection on stream failure - Permanent fallback to unary RPCs if filer returns Unimplemented - Monotonic request_id for response correlation - Multi-response support for rename operations (is_last signaling) The mux is initialized on WFS and closed during unmount cleanup. No call sites use it yet — wiring comes in subsequent commits. * mount: route CreateEntry and UpdateEntry through streaming mux Wire all CreateEntry call sites to use wfs.streamCreateEntry() which routes through the StreamMutateEntry stream when available, falling back to unary RPCs otherwise. Also wire Link's UpdateEntry calls through wfs.streamUpdateEntry(). Updated call sites: - flushMetadataToFiler (file flush after write) - Mkdir (directory creation) - Symlink (symbolic link creation) - createRegularFile non-deferred path (Mknod) - flushFileMetadata (periodic metadata flush) - Link (hard link: update source + create link + rollback) * mount: route UpdateEntry and DeleteEntry through streaming mux Wire remaining mutation call sites through the streaming mux: - saveEntry (Setattr/chmod/chown/utimes) → streamUpdateEntry - Unlink → streamDeleteEntry (replaces RemoveWithResponse) - Rmdir → streamDeleteEntry (replaces RemoveWithResponse) All filer mutations except Rename now go through StreamMutateEntry when the filer supports it, with automatic unary RPC fallback. * mount: route Rename through streaming mux Wire Rename to use streamMutate.Rename() when available, with fallback to the existing StreamRenameEntry unary stream. The streaming mux sends rename as a StreamRenameEntryRequest oneof variant. The server processes it through the existing rename logic and sends multiple StreamRenameEntryResponse events (one per moved entry), with is_last=true on the final response. All filer mutations now go through a single ordered stream. * mount: fix stream mux connection ownership WithGrpcClient(streamingMode=true) closes the gRPC connection when the callback returns, destroying the stream. Own the connection directly via pb.GrpcDial so it stays alive for the stream's lifetime. Close it explicitly in recvLoop on stream failure and in Close on shutdown. * mount: fix rename failure for deferred-create files Three fixes for rename operations over the streaming mux: 1. lookupEntry: fall back to local metadata store when filer returns "not found" for entries in uncached directories. Files created with deferFilerCreate=true exist only in the local leveldb store until flushed; lookupEntry skipped the local store when the parent directory had never been readdir'd, causing rename to fail with ENOENT. 2. Rename: wait for pending async flushes and force synchronous flush of dirty metadata before sending rename to the filer. Covers the writebackCache case where close() defers the flush to a background worker that may not complete before rename fires. 3. StreamMutateEntry: propagate rename errors from server to client. Add error/errno fields to StreamMutateEntryResponse so the mount can map filer errors to correct FUSE status codes instead of silently returning OK. Also fix the existing Rename error handler which could return fuse.OK on unrecognized errors. * mount: fix streaming mux error handling, sendLoop lifecycle, and fallback Address PR review comments: 1. Server: populate top-level Error/Errno on StreamMutateEntryResponse for create/update/delete errors, not just rename. Previously update errors were silently dropped and create/delete errors were only in nested response fields that the client didn't check. 2. Client: check nested error fields in CreateEntry (ErrorCode, Error) and DeleteEntry (Error) responses, matching CreateEntryWithResponse behavior. 3. Fix sendLoop lifecycle: give each stream generation a stopSend channel. recvLoop closes it on error to stop the paired sendLoop. Previously a reconnect left the old sendLoop draining sendCh, breaking ordering. 4. Transparent fallback: stream helpers and doRename fall back to unary RPCs on transport errors (ErrStreamTransport), including the first Unimplemented from ensureStream. Previously the first call failed instead of degrading. 5. Filer rotation in openStream: try all filer addresses on dial failure, matching WithFilerClient behavior. Stop early on Unimplemented. 6. Pass metadata-bearing context to StreamMutateEntry RPC call so sw-client-id header is actually sent. 7. Gate lookupEntry local-cache fallback on open dirty handle or pending async flush to avoid resurrecting deleted/renamed entries. 8. Remove dead code in flushFileMetadata (err=nil followed by if err!=nil). 9. Use string matching for rename error-to-errno mapping in the mount to stay portable across Linux/macOS (numeric errno values differ). * mount: make failAllPending idempotent with delete-before-close Change failAllPending to collect pending entries into a local slice (deleting from the sync.Map first) before closing channels. This prevents double-close panics if called concurrently. Also remove the unused err parameter. * mount: add stream generation tracking and teardownStream Introduce a generation counter on streamMutateMux that increments each time a new stream is created. Requests carry the generation they were enqueued for so sendLoop can reject stale requests after reconnect. Add teardownStream(gen) which is idempotent (only acts when gen matches current generation and stream is non-nil). Both sendLoop and recvLoop call it on error, replacing the inline cleanup in recvLoop. sendLoop now actively triggers teardown on send errors instead of silently exiting. ensureStream waits for the prior generation's recvDone before creating a new stream, ensuring all old pending waiters are failed before reconnect. recvLoop now takes the stream, generation, and recvDone channel as parameters to avoid accessing shared fields without the lock. * mount: harden Close to prevent races with teardownStream Nil out stream, cancel, and grpcConn under the lock so that any concurrent teardownStream call from recvLoop/sendLoop becomes a no-op. Call failAllPending before closing sendCh to unblock waiters promptly. Guard recvDone with a nil check for the case where Close is called before any stream was ever opened. * mount: make errCh receive ctx-aware in doUnary and Rename Replace the blocking <-sendReq.errCh with a select that also observes ctx.Done(). If sendLoop exits via stopSend without consuming a buffered request, the caller now returns ctx.Err() instead of blocking forever. The buffered errCh (capacity 1) ensures late acknowledgements from sendLoop don't block the sender. * mount: fix sendLoop/Close race and recvLoop/teardown pending channel race Three related fixes: 1. Stop closing sendCh in Close(). Closing the shared producer channel races with callers who passed ensureStream() but haven't sent yet, causing send-on-closed-channel panics. sendCh is now left open; ensureStream checks m.closed to reject new callers. 2. Drain buffered sendCh items on shutdown. sendLoop defers drainSendCh() on exit so buffered requests get an ErrStreamTransport on their errCh instead of blocking forever. Close() drains again for any stragglers enqueued between sendLoop's drain and the final shutdown. 3. Move failAllPending from teardownStream into recvLoop's defer. teardownStream (called from sendLoop on send error) was closing pending response channels while recvLoop could be between pending.Load and the channel send — a send-on-closed-channel panic. recvLoop is now the sole closer of pending channels, eliminating the race. Close() waits on recvDone (with cancel() to guarantee Recv unblocks) so pending cleanup always completes. * filer/mount: add debug logging for hardlink lifecycle Add V(0) logging at every point where a HardLinkId is created, stored, read, or deleted to trace orphaned hardlink references. Logging covers: - gRPC server: CreateEntry/UpdateEntry when request carries HardLinkId - FilerStoreWrapper: InsertEntry/UpdateEntry when entry has HardLinkId - handleUpdateToHardLinks: entry path, HardLinkId, counter, chunk count - setHardLink: KvPut with blob size - maybeReadHardLink: V(1) on read attempt and successful decode - DeleteHardLink: counter decrement/deletion events - Mount Link(): when NewHardLinkId is generated and link is created This helps diagnose how a git pack .rev file ended up with a HardLinkId during a clone (no hard links should be involved). * test: add git clone/pull integration test for FUSE mount Shell script that exercises git operations on a SeaweedFS mount: 1. Creates a bare repo on the mount 2. Clones locally, makes 3 commits, pushes to mount 3. Clones from mount bare repo into an on-mount working dir 4. Verifies clone integrity (files, content, commit hashes) 5. Pushes 2 more commits with renames and deletes 6. Checks out an older revision on the mount clone 7. Returns to branch and pulls with real changes 8. Verifies file content, renames, deletes after pull 9. Checks git log integrity and clean status 27 assertions covering file existence, content, commit hashes, file counts, renames, deletes, and git status. Run against any existing mount: bash test-git-on-mount.sh /path/to/mount * test: add git clone/pull FUSE integration test to CI suite Add TestGitOperations to the existing fuse_integration test framework. The test exercises git's full file operation surface on the mount: 1. Creates a bare repo on the mount (acts as remote) 2. Clones locally, makes 3 commits (files, bulk data, renames), pushes 3. Clones from mount bare repo into an on-mount working dir 4. Verifies clone integrity (content, commit hash, file count) 5. Pushes 2 more commits with new files, renames, and deletes 6. Checks out an older revision on the mount clone 7. Returns to branch and pulls with real fast-forward changes 8. Verifies post-pull state: content, renames, deletes, file counts 9. Checks git log integrity (5 commits) and clean status Runs automatically in the existing fuse-integration.yml CI workflow. * mount: fix permission check with uid/gid mapping The permission checks in createRegularFile() and Access() compared the caller's local uid/gid against the entry's filer-side uid/gid without applying the uid/gid mapper. With -map.uid 501:0, a directory created as uid 0 on the filer would not match the local caller uid 501, causing hasAccess() to fall through to "other" permission bits and reject write access (0755 → other has r-x, no w). Fix: map entry uid/gid from filer-space to local-space before the hasAccess() call so both sides are in the same namespace. This fixes rsync -a failing with "Permission denied" on mkstempat when using uid/gid mapping. * mount: fix Mkdir/Symlink returning filer-side uid/gid to kernel Mkdir and Symlink used `defer wfs.mapPbIdFromFilerToLocal(entry)` to restore local uid/gid, but `outputPbEntry` writes the kernel response before the function returns — so the kernel received filer-side uid/gid (e.g., 0:0). macFUSE then caches these and rejects subsequent child operations (mkdir, create) because the caller uid (501) doesn't match the directory owner (0), and "other" bits (0755 → r-x) lack write permission. Fix: replace the defer with an explicit call to mapPbIdFromFilerToLocal before outputPbEntry, so the kernel gets local uid/gid. Also add nil guards for UidGidMapper in Access and createRegularFile to prevent panics in tests that don't configure a mapper. This fixes rsync -a "Permission denied" on mkpathat for nested directories when using uid/gid mapping. * mount: fix Link outputting filer-side uid/gid to kernel, add nil guards Link had the same defer-before-outputPbEntry bug as Mkdir and Symlink: the kernel received filer-side uid/gid because the defer hadn't run yet when outputPbEntry wrote the response. Also add nil guards for UidGidMapper in Access and createRegularFile so tests without a mapper don't panic. Audit of all outputPbEntry/outputFilerEntry call sites: - Mkdir: fixed in prior commit (explicit map before output) - Symlink: fixed in prior commit (explicit map before output) - Link: fixed here (explicit map before output) - Create (existing file): entry from maybeLoadEntry (already mapped) - Create (deferred): entry has local uid/gid (never mapped to filer) - Create (non-deferred): createRegularFile defer runs before return - Mknod: createRegularFile defer runs before return - Lookup: entry from lookupEntry (already mapped) - GetAttr: entry from maybeReadEntry/maybeLoadEntry (already mapped) - readdir: entry from cache (mapIdFromFilerToLocal) or filer (mapped) - saveEntry: no kernel output - flushMetadataToFiler: no kernel output - flushFileMetadata: no kernel output * test: fix git test for same-filesystem FUSE clone When both the bare repo and working clone live on the same FUSE mount, git's local transport uses hardlinks and cross-repo stat calls that fail on FUSE. Fix: - Use --no-local on clone to disable local transport optimizations - Use reset --hard instead of checkout to stay on branch - Use fetch + reset --hard origin/<branch> instead of git pull to avoid local transport stat failures during fetch * adjust logging * test: use plain git clone/pull to exercise real FUSE behavior Remove --no-local and fetch+reset workarounds. The test should use the same git commands users run (clone, reset --hard, pull) so it reveals real FUSE issues rather than hiding them. * test: enable V(1) logging for filer/mount and collect logs on failure - Run filer and mount with -v=1 so hardlink lifecycle logs (V(0): create/delete/insert, V(1): read attempts) are captured - On test failure, automatically dump last 16KB of all process logs (master, volume, filer, mount) to test output - Copy process logs to /tmp/seaweedfs-fuse-logs/ for CI artifact upload - Update CI workflow to upload SeaweedFS process logs alongside test output * mount: clone entry for filer flush to prevent uid/gid race flushMetadataToFiler and flushFileMetadata used entry.GetEntry() which returns the file handle's live proto entry pointer, then mutated it in-place via mapPbIdFromLocalToFiler. During the gRPC call window, a concurrent Lookup (which takes entryLock.RLock but NOT fhLockTable) could observe filer-side uid/gid (e.g., 0:0) on the file handle entry and return it to the kernel. The kernel caches these attributes, so subsequent opens by the local user (uid 501) fail with EACCES. Fix: proto.Clone the entry before mapping uid/gid for the filer request. The file handle's live entry is never mutated, so concurrent Lookup always sees local uid/gid. This fixes the intermittent "Permission denied" on .git/FETCH_HEAD after the first git pull on a mount with uid/gid mapping. * mount: add debug logging for stale lock file investigation Add V(0) logging to trace the HEAD.lock recreation issue: - Create: log when O_EXCL fails (file already exists) with uid/gid/mode - completeAsyncFlush: log resolved path, saved path, dirtyMetadata, isDeleted at entry to trace whether async flush fires after rename - flushMetadataToFiler: log the dir/name/fullpath being flushed This will show whether the async flush is recreating the lock file after git renames HEAD.lock → HEAD. * mount: prevent async flush from recreating renamed .lock files When git renames HEAD.lock → HEAD, the async flush from the prior close() can run AFTER the rename and re-insert HEAD.lock into the meta cache via its CreateEntryRequest response event. The next git pull then sees HEAD.lock and fails with "File exists". Fix: add isRenamed flag on FileHandle, set by Rename before waiting for the pending async flush. The async flush checks this flag and skips the metadata flush for renamed files (same pattern as isDeleted for unlinked files). The data pages still flush normally. The Rename handler flushes deferred metadata synchronously (Case 1) before setting isRenamed, ensuring the entry exists on the filer for the rename to proceed. For already-released handles (Case 2), the entry was created by a prior flush. * mount: also mark renamed inodes via entry.Attributes.Inode fallback When GetInode fails (Forget already removed the inode mapping), the Rename handler couldn't find the pending async flush to set isRenamed. The async flush then recreated the .lock file on the filer. Fix: fall back to oldEntry.Attributes.Inode to find the pending async flush when the inode-to-path mapping is gone. Also extract MarkInodeRenamed into a method on FileHandleToInode for clarity. * mount: skip async metadata flush when saved path no longer maps to inode The isRenamed flag approach failed for refs/remotes/origin/HEAD.lock because neither GetInode nor oldEntry.Attributes.Inode could find the inode (Forget already evicted the mapping, and the entry's stored inode was 0). Add a direct check in completeAsyncFlush: before flushing metadata, verify that the saved path still maps to this inode in the inode-to-path table. If the path was renamed or removed (inode mismatch or not found), skip the metadata flush to avoid recreating a stale entry. This catches all rename cases regardless of whether the Rename handler could set the isRenamed flag. * mount: wait for pending async flush in Unlink before filer delete Unlink was deleting the filer entry first, then marking the draining async-flush handle as deleted. The async flush worker could race between these two operations and recreate the just-unlinked entry on the filer. This caused git's .lock files (e.g. refs/remotes/origin/HEAD.lock) to persist after git pull, breaking subsequent git operations. Move the isDeleted marking and add waitForPendingAsyncFlush() before the filer delete so any in-flight flush completes first. Even if the worker raced past the isDeleted check, the wait ensures it finishes before the filer delete cleans up any recreated entry. * mount: reduce async flush and metadata flush log verbosity Raise completeAsyncFlush entry log, saved-path-mismatch skip log, and flushMetadataToFiler entry log from V(0) to V(3)/V(4). These fire for every file close with writebackCache and are too noisy for normal use. * filer: reduce hardlink debug log verbosity from V(0) to V(4) HardLinkId logs in filerstore_wrapper, filerstore_hardlink, and filer_grpc_server fire on every hardlinked file operation (git pack files use hardlinks extensively) and produce excessive noise. * mount/filer: reduce noisy V(0) logs for link, rmdir, and empty folder check - weedfs_link.go: hardlink creation logs V(0) → V(4) - weedfs_dir_mkrm.go: non-empty folder rmdir error V(0) → V(1) - empty_folder_cleaner.go: "not empty" check log V(0) → V(4) * filer: handle missing hardlink KV as expected, not error A "kv: not found" on hardlink read is normal when the link blob was already cleaned up but a stale entry still references it. Log at V(1) for not-found; keep Error level for actual KV failures. * test: add waitForDir before git pull in FUSE git operations test After git reset --hard, the FUSE mount's metadata cache may need a moment to settle on slow CI. The git pull subprocess (unpack-objects) could fail to stat the working directory. Poll for up to 5s. * Update git_operations_test.go * wait * test: simplify FUSE test framework to use weed mini Replace the 4-process setup (master + volume + filer + mount) with 2 processes: "weed mini" (all-in-one) + "weed mount". This simplifies startup, reduces port allocation, and is faster on CI. * test: fix mini flag -admin → -admin.ui	2026-03-25 20:06:34 -07:00
Chris LuandCopilot	3f946fc0c0	mount: make metadata cache rebuilds snapshot-consistent (#8531) ... * filer: expose metadata events and list snapshots * mount: invalidate hot directory caches * mount: read hot directories directly from filer * mount: add sequenced metadata cache applier * mount: apply metadata responses through cache applier * mount: replay snapshot-consistent directory builds * mount: dedupe self metadata events * mount: factor directory build cleanup * mount: replace proto marshal dedup with composite key and ring buffer The dedup logic was doing a full deterministic proto.Marshal on every metadata event just to produce a dedup key. Replace with a cheap composite string key (TsNs|Directory|OldName|NewName). Also replace the sliding-window slice (which leaked the backing array unboundedly) with a fixed-size ring buffer that reuses the same array. * filer: remove mutex and proto.Clone from request-scoped MetadataEventSink MetadataEventSink is created per-request and only accessed by the goroutine handling the gRPC call. The mutex and double proto.Clone (once in Record, once in Last) were unnecessary overhead on every filer write operation. Store the pointer directly instead. * mount: skip proto.Clone for caller-owned metadata events Add ApplyMetadataResponseOwned that takes ownership of the response without cloning. Local metadata events (mkdir, create, flush, etc.) are freshly constructed and never shared, so the clone is unnecessary. * filer: only populate MetadataEvent on successful DeleteEntry Avoid calling eventSink.Last() on error paths where the sink may contain a partial event from an intermediate child deletion during recursive deletes. * mount: avoid map allocation in collectDirectoryNotifications Replace the map with a fixed-size array and linear dedup. There are at most 3 directories to notify (old parent, new parent, new child if directory), so a 3-element array avoids the heap allocation on every metadata event. * mount: fix potential deadlock in enqueueApplyRequest Release applyStateMu before the blocking channel send. Previously, if the channel was full (cap 128), the send would block while holding the mutex, preventing Shutdown from acquiring it to set applyClosed. * mount: restore signature-based self-event filtering as fast path Re-add the signature check that was removed when content-based dedup was introduced. Checking signatures is O(1) on a small slice and avoids enqueuing and processing events that originated from this mount instance. The content-based dedup remains as a fallback. * filer: send snapshotTsNs only in first ListEntries response The snapshot timestamp is identical for every entry in a single ListEntries stream. Sending it in every response message wastes wire bandwidth for large directories. The client already reads it only from the first response. * mount: exit read-through mode after successful full directory listing MarkDirectoryRefreshed was defined but never called, so directories that entered read-through mode (hot invalidation threshold) stayed there permanently, hitting the filer on every readdir even when cold. Call it after a complete read-through listing finishes. * mount: include event shape and full paths in dedup key The previous dedup key only used Names, which could collapse distinct rename targets. Include the event shape (C/D/U/R), source directory, new parent path, and both entry names so structurally different events are never treated as duplicates. * mount: drain pending requests on shutdown in runApplyLoop After receiving the shutdown sentinel, drain any remaining requests from applyCh non-blockingly and signal each with errMetaCacheClosed so callers waiting on req.done are released. * mount: include IsDirectory in synthetic delete events metadataDeleteEvent now accepts an isDirectory parameter so the applier can distinguish directory deletes from file deletes. Rmdir passes true, Unlink passes false. * mount: fall back to synthetic event when MetadataEvent is nil In mknod and mkdir, if the filer response omits MetadataEvent (e.g. older filer without the field), synthesize an equivalent local metadata event so the cache is always updated. * mount: make Flush metadata apply best-effort after successful commit After filer_pb.CreateEntryWithResponse succeeds, the entry is persisted. Don't fail the Flush syscall if the local metadata cache apply fails — log and invalidate the directory cache instead. Also fall back to a synthetic event when MetadataEvent is nil. * mount: make Rename metadata apply best-effort The rename has already succeeded on the filer by the time we apply the local metadata event. Log failures instead of returning errors that would be dropped by the caller anyway. * mount: make saveEntry metadata apply best-effort with fallback After UpdateEntryWithResponse succeeds, treat local metadata apply as non-fatal. Log and invalidate the directory cache on failure. Also fall back to a synthetic event when MetadataEvent is nil. * filer_pb: preserve snapshotTsNs on error in ReadDirAllEntriesWithSnapshot Return the snapshot timestamp even when the first page fails, so callers receive the snapshot boundary when partial data was received. * filer: send snapshot token for empty directory listings When no entries are streamed, send a final ListEntriesResponse with only SnapshotTsNs so clients always receive the snapshot boundary. * mount: distinguish not-found vs transient errors in lookupEntry Return fuse.EIO for non-not-found filer errors instead of unconditionally returning ENOENT, so transient failures don't masquerade as missing entries. * mount: make CacheRemoteObject metadata apply best-effort The file content has already been cached successfully. Don't fail the read if the local metadata cache update fails. * mount: use consistent snapshot for readdir in direct mode Capture the SnapshotTsNs from the first loadDirectoryEntriesDirect call and store it on the DirectoryHandle. Subsequent batch loads pass this stored timestamp so all batches use the same snapshot. Also export DoSeaweedListWithSnapshot so mount can use it directly with snapshot passthrough. * filer_pb: fix test fake to send SnapshotTsNs only on first response Match the server behavior: only the first ListEntriesResponse in a page carries the snapshot timestamp, subsequent entries leave it zero. * Fix nil pointer dereference in ListEntries stream consumers Remove the empty-directory snapshot-only response from ListEntries that sent a ListEntriesResponse with Entry==nil, which crashed every raw stream consumer that assumed resp.Entry is always non-nil. Also add defensive nil checks for resp.Entry in all raw ListEntries stream consumers across: S3 listing, broker topic lookup, broker topic config, admin dashboard, topic retention, hybrid message scanner, Kafka integration, and consumer offset storage. * Add nil guards for resp.Entry in remaining ListEntries stream consumers Covers: S3 object lock check, MQ management dashboard (version/ partition/offset loops), and topic retention version loop. * Make applyLocalMetadataEvent best-effort in Link and Symlink The filer operations already succeeded; failing the syscall because the local cache apply failed is wrong. Log a warning and invalidate the parent directory cache instead. * Make applyLocalMetadataEvent best-effort in Mkdir/Rmdir/Mknod/Unlink The filer RPC already committed; don't fail the syscall when the local metadata cache apply fails. Log a warning and invalidate the parent directory cache to force a re-fetch on next access. * flushFileMetadata: add nil-fallback for metadata event and best-effort apply Synthesize a metadata event when resp.GetMetadataEvent() is nil (matching doFlush), and make the apply best-effort with cache invalidation on failure. * Prevent double-invocation of cleanupBuild in doEnsureVisited Add a cleanupDone guard so the deferred cleanup and inline error-path cleanup don't both call DeleteFolderChildren/AbortDirectoryBuild. * Fix comment: signature check is O(n) not O(1) * Prevent deferred cleanup after successful CompleteDirectoryBuild Set cleanupDone before returning from the success path so the deferred context-cancellation check cannot undo a published build. * Invalidate parent directory caches on rename metadata apply failure When applyLocalMetadataEvent fails during rename, invalidate the source and destination parent directory caches so subsequent accesses trigger a re-fetch from the filer. * Add event nil-fallback and cache invalidation to Link and Symlink Synthesize metadata events when the server doesn't return one, and invalidate parent directory caches on apply failure. * Match requested partition when scanning partition directories Parse the partition range format (NNNN-NNNN) and match against the requested partition parameter instead of using the first directory. * Preserve snapshot timestamp across empty directory listings Initialize actualSnapshotTsNs from the caller-requested value so it isn't lost when the server returns no entries. Re-add the server-side snapshot-only response for empty directories (all raw stream consumers now have nil guards for Entry). * Fix CreateEntry error wrapping to support errors.Is/errors.As Use errors.New + %w instead of %v for resp.Error so callers can unwrap the underlying error. * Fix object lock pagination: only advance on non-nil entries Move entriesReceived inside the nil check so nil entries don't cause repeated ListEntries calls with the same lastFileName. * Guard Attributes nil check before accessing Mtime in MQ management * Do not send nil-Entry response for empty directory listings The snapshot-only ListEntriesResponse (with Entry == nil) for empty directories breaks consumers that treat any received response as an entry (Java FilerClient, S3 listing). The Go client-side DoSeaweedListWithSnapshot already preserves the caller-requested snapshot via actualSnapshotTsNs initialization, so the server-side send is unnecessary. * Fix review findings: subscriber dedup, invalidation normalization, nil guards, shutdown race - Remove self-signature early-return in processEventFn so all events flow through the applier (directory-build buffering sees self-originated events that arrive after a snapshot) - Normalize NewParentPath in collectEntryInvalidations to avoid duplicate invalidations when NewParentPath is empty (same-directory update) - Guard resp.Entry.Attributes for nil in admin_server.go and topic_retention.go to prevent panics on entries without attributes - Fix enqueueApplyRequest race with shutdown by using select on both applyCh and applyDone, preventing sends after the apply loop exits - Add cleanupDone check to deferred cleanup in meta_cache_init.go for clarity alongside the existing guard in cleanupBuild - Add empty directory test case for snapshot consistency * Propagate authoritative metadata event from CacheRemoteObjectToLocalCluster and generate client-side snapshot for empty directories - Add metadata_event field to CacheRemoteObjectToLocalClusterResponse proto so the filer-emitted event is available to callers - Use WithMetadataEventSink in the server handler to capture the event from NotifyUpdateEvent and return it on the response - Update filehandle_read.go to prefer the RPC's metadata event over a locally fabricated one, falling back to metadataUpdateEvent when the server doesn't provide one (e.g., older filers) - Generate a client-side snapshot cutoff in DoSeaweedListWithSnapshot when the server sends no snapshot (empty directory), so callers like CompleteDirectoryBuild get a meaningful boundary for filtering buffered events * Skip directory notifications for dirs being built to prevent mid-build cache wipe When a metadata event is buffered during a directory build, applyMetadataSideEffects was still firing noteDirectoryUpdate for the building directory. If the directory accumulated enough updates to become "hot", markDirectoryReadThrough would call DeleteFolderChildren, wiping entries that EnsureVisited had already inserted. The build would then complete and mark the directory cached with incomplete data. Fix by using applyMetadataSideEffectsSkippingBuildingDirs for buffered events, which suppresses directory notifications for dirs currently in buildingDirs while still applying entry invalidations. * Add test for directory notification suppression during active build TestDirectoryNotificationsSuppressedDuringBuild verifies that metadata events targeting a directory under active EnsureVisited build do NOT fire onDirectoryUpdate for that directory. In production, this prevents markDirectoryReadThrough from calling DeleteFolderChildren mid-build, which would wipe entries already inserted by the listing. The test inserts an entry during a build, sends multiple metadata events for the building directory, asserts no notifications fired for it, verifies the entry survives, and confirms buffered events are replayed after CompleteDirectoryBuild. * Fix create invalidations, build guard, event shape, context, and snapshot error path - collectEntryInvalidations: invalidate FUSE kernel cache on pure create events (OldEntry==nil && NewEntry!=nil), not just updates and deletes - completeDirectoryBuildNow: only call markCachedFn when an active build existed (state != nil), preventing an unpopulated directory from being marked as cached - Add metadataCreateEvent helper that produces a create-shaped event (NewEntry only, no OldEntry) and use it in mkdir, mknod, symlink, and hardlink create fallback paths instead of metadataUpdateEvent which incorrectly set both OldEntry and NewEntry - applyMetadataResponseEnqueue: use context.Background() for the queued mutation so a cancelled caller context cannot abort the apply loop mid-write - DoSeaweedListWithSnapshot: move snapshot initialization before ListEntries call so the error path returns the preserved snapshot instead of 0 * Fix review findings: test loop, cache race, context safety, snapshot consistency - Fix build test loop starting at i=1 instead of i=0, missing new-0.txt verification - Re-check IsDirectoryCached after cache miss to avoid ENOENT race with markDirectoryReadThrough - Use context.Background() in enqueueAndWait so caller cancellation can't abort build/complete mid-way - Pass dh.snapshotTsNs in skip-batch loadDirectoryEntriesDirect for snapshot consistency - Prefer resp.MetadataEvent over fallback in Unlink event derivation - Add comment on MetadataEventSink.Record single-event assumption * Fix empty-directory snapshot clock skew and build cancellation race Empty-directory snapshot: Remove client-side time.Now() synthesis when the server returns no entries. Instead return snapshotTsNs=0, and in completeDirectoryBuildNow replay ALL buffered events when snapshot is 0. This eliminates the clock-skew bug where a client ahead of the filer would filter out legitimate post-list events. Build cancellation: Use context.Background() for BeginDirectoryBuild and CompleteDirectoryBuild calls in doEnsureVisited, so errgroup cancellation doesn't cause enqueueAndWait to return early and trigger cleanupBuild while the operation is still queued. * Add tests for empty-directory build replay and cancellation resilience TestEmptyDirectoryBuildReplaysAllBufferedEvents: verifies that when CompleteDirectoryBuild receives snapshotTsNs=0 (empty directory, no server snapshot), ALL buffered events are replayed regardless of their TsNs values — no clock-skew-sensitive filtering occurs. TestBuildCompletionSurvivesCallerCancellation: verifies that once CompleteDirectoryBuild is enqueued, a cancelled caller context does not prevent the build from completing. The apply loop runs with context.Background(), so the directory becomes cached and buffered events are replayed even when the caller gives up waiting. * Fix directory subtree cleanup, Link rollback, test robustness - applyMetadataResponseLocked: when a directory entry is deleted or moved, call DeleteFolderChildren on the old path so cached descendants don't leak as stale entries. - Link: save original HardLinkId/Counter before mutation. If CreateEntryWithResponse fails after the source was already updated, rollback the source entry to its original state via UpdateEntry. - TestBuildCompletionSurvivesCallerCancellation: replace fixed time.Sleep(50ms) with a deadline-based poll that checks IsDirectoryCached in a loop, failing only after 2s timeout. - TestReadDirAllEntriesWithSnapshotEmptyDirectory: assert that ListEntries was actually invoked on the mock client so the test exercises the RPC path. - newMetadataEvent: add early return when both oldEntry and newEntry are nil to avoid emitting events with empty Directory. --------- Co-authored-by: Copilot <copilot@github.com>	2026-03-07 09:19:40 -08:00
Chris Lu	d4ecfaeda7	Enable writeback_cache and async_dio FUSE options (#7980) ... * Enable writeback_cache and async_dio FUSE options Fixes #7978 - Update mount_std.go to use EnableWriteback and EnableAsyncDio from go-fuse - Add go.mod replace directive to use local go-fuse with capability support - Remove temporary workaround that disabled these options This enables proper FUSE kernel capability negotiation for writeback cache and async direct I/O, improving performance for small writes and concurrent direct I/O operations. * Address PR review comments - Remove redundant nil checks for writebackCache and asyncDio flags - Update go.mod replace directive to use seaweedfs/go-fuse fork instead of local path * Add TODO comment for go.mod replace directive The replace directive must use a local path until seaweedfs/go-fuse#1 is merged. After merge, this should be updated to use the proper version. * Use seaweedfs/go-fuse v2.9.0 instead of local repository Replace local path with seaweedfs/go-fuse v2.9.0 fork which includes the writeback_cache and async_dio capability support. * Use github.com/seaweedfs/go-fuse/v2 directly without replace directive - Updated all imports to use github.com/seaweedfs/go-fuse/v2 - Removed replace directive from go.mod - Using seaweedfs/go-fuse v2.0.0-20260106181308-87f90219ce09 which includes: * writeback_cache and async_dio support * Corrected module path * Update to seaweedfs/go-fuse v2.9.1 Use v2.9.1 tag which includes the corrected module path (github.com/seaweedfs/go-fuse/v2) along with writeback_cache and async_dio support.	2026-01-06 10:50:54 -08:00
Chris Lu	998bcf2b3f	classify grpc errors	2025-12-31 13:40:14 -08:00
Chris Lu	f7f133166a	adjust fuse logs	2025-12-31 13:04:05 -08:00
chrislu	26dbc6c905	move to https://github.com/seaweedfs/seaweedfs	2022-07-29 00:17:28 -07:00
chrislu	ebda0689ab	use linux default max name length	2022-07-23 10:51:06 -07:00
chrislu	e85ca10a1a	add mkdir	2022-02-13 01:34:19 -08:00
chrislu	c81833a192	add directory setAttr	2022-02-12 23:08:56 -08:00