* master: bound each volume server DeleteCollection, and finish the fan-out
A collection delete fanned out to every volume server holding it with
context.Background(), so a server that accepted the connection and then
went quiet held the whole delete open with nothing to end it. Each RPC is
bounded now, on the same budget allocateVolumeTimeout gives the other
master-to-volume-server admin RPC. The volume server runs the delete to
completion regardless of the request context, so giving up costs the
confirmation and not the deletion.
The walk itself is the caller's, not a per-server one:
- It outlives the caller. A cancelled request must not abandon a
destructive fan-out part-done, with volumes left behind and no request
still running to come back for them.
- It no longer stops at the first server that refuses, which left the
collection on every server after it in the list. The first failure is
still what is reported, and the collection stays in the topology so a
later delete comes back for the rest.
- It sends one RPC per server rather than one per replica.
ListVolumeServers reports a node once for every replica it holds, while
DeleteCollection removes the whole collection from the server it
reaches, so a collection with thousands of volumes repeated the same
whole-collection delete thousands of times over.
Both passes run too. Returning after a failed normal pass left the
collection's EC shards in place with nothing left to retry them.
Claude-Session: https://claude.ai/code/session_01EnB1fbryyKc2LetRZxQPTP
* master: delete the EC shards behind /col/delete too
The HTTP handler carried its own copy of the volume-server walk and only
ever ran the normal pass, so a collection deleted through it kept its EC
shards. It shares the gRPC path now, which also gets it the bounded RPCs
and the one-per-server fan-out.
Claude-Session: https://claude.ai/code/session_01EnB1fbryyKc2LetRZxQPTP
* filer: bound the collection delete a bucket delete leaves behind
Deleting a bucket entry deletes its collection afterwards, deliberately
detached from the request so a client that hangs up cannot strand the
bucket's volumes. Detached meant unbounded, though: with the master down
or mid-election the wait for a leader has nothing to end it, so the
handler parks, and the client retrying behind it parks another.
It keeps outliving the request and now carries a deadline of its own. The
budget bounds the wait, not the work: the master keeps deleting on its own
fan-out once asked, so giving up costs the confirmation.
Claude-Session: https://claude.ai/code/session_01EnB1fbryyKc2LetRZxQPTP
* s3api: bound the collection RPCs a bucket creation and deletion issue
Neither carried a deadline, so a transient failure anywhere down the chain
held the S3 request open until the client gave up on it. Both budgets are
taken outside the filer failover walk, so one budget covers the whole walk
rather than granting each filer a fresh one.
The walk itself stops when that budget is spent, and stops without blaming
anyone: the caller's own expiry is not evidence against the filer that was
answering, and the next filer has no time left to answer in either.
Recorded as a filer failure, a slow master upstream would flag every filer
in the walk, and the three failures that open the circuit take unrelated
object reads down with them.
Claude-Session: https://claude.ai/code/session_01EnB1fbryyKc2LetRZxQPTP
* s3api: a failed collection listing no longer fails a bucket creation
PutBucket lists collections to notice a leftover one it is about to reuse.
The result feeds a warning and nothing else -- s3a.exists is what decides
whether the bucket already exists -- yet a transient failure of that
listing returned 500 and refused the creation. It is advisory now, so a
failure is logged and the creation continues, exactly as it does when the
listing returns false.
Claude-Session: https://claude.ai/code/session_01EnB1fbryyKc2LetRZxQPTP
s3api: no filer failover after fn has consumed part of a response
withFilerClientFailover replays fn verbatim on the next filer, so a filer
that died mid-stream followed by a healthy peer returned success with the
callback's closure-captured accumulator holding the dead filer's prefix
twice; the per-attempt accumulator in listWithRetry could not close this,
because the replay happens inside a single attempt. Track delivery on the
connection handed to fn: once a unary reply or streamed message has reached
the callback, surface the transport error unwrapped instead of failing
over, and let callers replay from a clean slate. A filer that fails before
delivering anything fails over exactly as before.
Blanking preferred kept route-by-key reads from dialing a flagged owner first,
but withFilerClientFailover always re-adds the current filer, so when the owner
is the gateway's current filer it stayed in the candidate list and got dialed
anyway. Treat a recently-unreachable filer as unhealthy in the health partition
so it is deferred to the last-resort tail instead of tried before healthy
replicas; preferred is still tried first, and a live owner is unaffected.
* s3: route object reads to the key's owner filer
Writes already route by key to the owner filer on the lock ring, where the
entry is created. Reads went to the gateway's local filer and treated its
NotFound as authoritative, so a GET on one gateway could miss an object
another gateway had just written until the filers' metadata replication
caught up.
Resolve an object's entry from the key's owner first, failing over to the
gateway's filer set only on transport errors. An owner NotFound stays
authoritative: no fan-out across filers, and no resurrecting a peer's
not-yet-replicated tombstone, so a delete routed to the owner is visible at
once and a genuine miss costs one lookup. Keys owned by the local filer are
unchanged. Objects written through the non-routed lock path land on a
gateway's local filer, so they can still read as absent on the owner until
they replicate.
withFilerClientFailover takes a preferred start filer; the object-entry
reads pass the owner, every other caller passes "" and keeps the
current-filer fast path.
* s3: consult the prior owner on a rebalance-window read miss
Owner-first reads route a key to its current ring owner. When a filer joins,
~1/N of keys reassign to it, and the new owner may not have replicated a
just-moved key yet, so an owner NotFound would surface a transient 404 for an
object that already exists elsewhere.
Retain the previous ring on the gateway's LockClient for a cooling-off window
(PriorOwnerForKey, mirroring the master's LockRing.PriorOwner) and, on the
owner's NotFound, probe the key's previous owner once before treating the miss
as final. The probe is scoped to keys whose ownership actually moved and only
within the window, so steady-state reads are untouched.
This trades the transient scale-up 404 for a transient stale read if a delete
routed to the new owner races the same window — the same authoritative-NotFound
tradeoff, narrowed to the rebalance.
* s3: try healthy filers before unhealthy ones on failover
The candidate list probed its first entry (usually the current filer)
unconditionally, so a health-flagged current filer cost a transport timeout on
every ordinary call before failover reached a replica. Partition candidates into
healthy and unhealthy, keep priority within each, and fall back to unhealthy
ones only when all healthy ones fail.
* reduce comments on the routed read and lock client paths
* s3: skip a recently-unreachable owner on route-by-key reads
The gateway's filer health tracking no-ops for an owner outside the static
-filer list, so during a sustained owner outage every route-by-key read
re-dials the dead owner before failing over. Flag an owner whose owner-first
read hit a transport error and skip it (read local-first) for a short TTL, so
reads pay one dead dial per TTL instead of one per request; the flag expires so
owner-first reads resume once the owner or the ring recovers.
* s3: always try the preferred owner first, health-order only the rest
The healthy/unhealthy partition also demoted a health-flagged preferred owner
behind healthy replicas, so a replica's authoritative NotFound could mask a
write that had only reached the owner — the read-after-write race this routing
exists to close. Pull preferred out of the partition and keep it first; the
recently-unreachable gate already steers reads away from a genuinely dead owner.
A Canceled/DeadlineExceeded from the caller's per-request context was
treated like a dead channel: it closed the shared cached ClientConn and
cancelled every other in-flight RPC on it with "the client connection is
closing". Under a burst of concurrent chunk assigns (e.g. a large S3
multipart upload) one slow assign hitting its 10s attempt timeout could
poison the connection for all the rest, cascading into a flood of 500s.
Thread the caller's context into shouldInvalidateConnection and only
invalidate on Canceled/DeadlineExceeded while that context is still live,
which isolates the genuine stale-channel signal (a peer restart behind a
k8s Service VIP). To carry the context, add a ctx parameter to the
existing WithGrpcClient, WithMasterClient, and WithMasterServerClient; the
master assign and volume-lookup paths pass their per-attempt context and
every other caller passes context.Background().
withFilerClientFailover treated a filer's ErrNotFound like a transport
failure: it kept the result, re-queried every other filer, and finally
wrapped the answer as "all filers failed, last error: ... no entry is
found in filer store".
For workloads with many legitimate misses (e.g. GET object?versionId=X
for a version that was deleted or expired), this turned each 404 into N
filer round-trips and produced a misleading error string.
A reachable filer that answers ErrNotFound has given an authoritative
answer; failover exists to route around unreachable or unhealthy filers,
not to look harder for an entry the store reports as absent. Return
ErrNotFound directly instead of fanning out. Callers that need
read-after-write retries already handle that at the S3 semantic layer
(e.g. getLatestObjectVersion).
* fix(s3): don't count ErrNotFound as filer health failure in failover
The S3 gateway's filer client failover was recording ErrNotFound
(entry doesn't exist) as a filer health failure. In multi-filer
setups where filers have separate metadata stores, normal object
lookups that return "not found" accumulated in the circuit breaker,
eventually marking healthy filers as unhealthy after just 3 lookups.
This caused the distributed lock integration test to fail with 500
InternalError: once a filer was circuit-broken, subsequent lookups
could no longer fall back, turning a would-be 412 PreconditionFailed
into an unrecoverable internal error.
Only record actual transport/server failures in the health tracker.
The failover still tries other filers for data locality, but no
longer penalizes filers for correctly reporting missing entries.
* style: inline isNotFound variable for consistency
The variable was only used once; inlining it matches the pattern
already used in the failover loop a few lines below.
* Support multiple filers for S3 and IAM servers with automatic failover
This change adds support for multiple filer addresses in the 'weed s3' and 'weed iam' commands, enabling high availability through automatic failover.
Key changes:
- Updated S3ApiServerOption.Filer to Filers ([]pb.ServerAddress)
- Updated IamServerOption.Filer to Filers ([]pb.ServerAddress)
- Modified -filer flag to accept comma-separated addresses
- Added getFilerAddress() helper methods for backward compatibility
- Updated all filer client calls to support multiple addresses
- Uses pb.WithOneOfGrpcFilerClients for automatic failover
Usage:
weed s3 -filer=localhost:8888,localhost:8889
weed iam -filer=localhost:8888,localhost:8889
The underlying FilerClient already supported multiple filers with health
tracking and automatic failover - this change exposes that capability
through the command-line interface.
* Add filer discovery: treat initial filers as seeds and discover peers from master
Enhances FilerClient to automatically discover additional filers in the same
filer group by querying the master server. This allows users to specify just
a few seed filers, and the client will discover all other filers in the cluster.
Key changes to wdclient/FilerClient:
- Added MasterClient, FilerGroup, and DiscoveryInterval fields
- Added thread-safe filer list management with RWMutex
- Implemented discoverFilers() background goroutine
- Uses cluster.ListExistingPeerUpdates() to query master for filers
- Automatically adds newly discovered filers to the list
- Added Close() method to clean up discovery goroutine
New FilerClientOption fields:
- MasterClient: enables filer discovery from master
- FilerGroup: specifies which filer group to discover
- DiscoveryInterval: how often to refresh (default 5 minutes)
Usage example:
masterClient := wdclient.NewMasterClient(...)
filerClient := wdclient.NewFilerClient(
[]pb.ServerAddress{"localhost:8888"}, // seed filers
grpcDialOption,
dataCenter,
&wdclient.FilerClientOption{
MasterClient: masterClient,
FilerGroup: "my-group",
},
)
defer filerClient.Close()
The initial filers act as seeds - the client discovers and adds all other
filers in the same group from the master. Discovered filers are added
dynamically without removing existing ones (relying on health checks for
unavailable filers).
* Address PR review comments: implement full failover for IAM operations
Critical fixes based on code review feedback:
1. **IAM API Failover (Critical)**:
- Replace pb.WithGrpcFilerClient with pb.WithOneOfGrpcFilerClients in:
* GetS3ApiConfigurationFromFiler()
* PutS3ApiConfigurationToFiler()
* GetPolicies()
* PutPolicies()
- Now all IAM operations support automatic failover across multiple filers
2. **Validation Improvements**:
- Add validation in NewIamApiServerWithStore() to require at least one filer
- Add validation in NewS3ApiServerWithStore() to require at least one filer
- Add warning log when no filers configured for credential store
3. **Error Logging**:
- Circuit breaker now logs when config load fails instead of silently ignoring
- Helps operators understand why circuit breaker limits aren't applied
4. **Code Quality**:
- Use ToGrpcAddress() for filer address in credential store setup
- More consistent with rest of codebase and future-proof
These changes ensure IAM operations have the same high availability guarantees
as S3 operations, completing the multi-filer failover implementation.
* Fix IAM manager initialization: remove code duplication, add TODO for HA
Addresses review comment on s3api_server.go:145
Changes:
- Remove duplicate code for getting first filer address
- Extract filerAddr variable once and reuse
- Add TODO comment documenting the HA limitation for IAM manager
- Document that loadIAMManagerFromConfig and NewS3IAMIntegration need
updates to support multiple filers for full HA
Note: This is a known limitation when using filer-backed IAM stores.
The interfaces need to be updated to accept multiple filer addresses.
For now, documenting this limitation clearly.
* Document credential store HA limitation with TODO
Addresses review comment on auth_credentials.go:149
Changes:
- Add TODO comment documenting that SetFilerClient interface needs update
for multi-filer support
- Add informative log message indicating HA limitation
- Document that this is a known limitation for filer-backed credential stores
The SetFilerClient interface currently only accepts a single filer address.
To properly support HA, the credential store interfaces need to be updated
to handle multiple filer addresses.
* Track current active filer in FilerClient for better HA
Add GetCurrentFiler() method to FilerClient that returns the currently
active filer based on the filerIndex which is updated on successful
operations. This provides better availability than always using the
first filer.
Changes:
- Add FilerClient.GetCurrentFiler() method that returns current active filer
- Update S3ApiServer.getFilerAddress() to use FilerClient's current filer
- Add fallback to first filer if FilerClient not yet initialized
- Document IAM limitation (doesn't have FilerClient access)
Benefits:
- Single-filer operations (URLs, ReadFilerConf, etc.) now use the
currently active/healthy filer
- Better distribution and failover behavior
- FilerClient's round-robin and health tracking automatically
determines which filer to use
* Document ReadFilerConf HA limitation in lifecycle handlers
Addresses review comment on s3api_bucket_handlers.go:880
Add comment documenting that ReadFilerConf uses the current active filer
from FilerClient (which is better than always using first filer), but
doesn't have built-in multi-filer failover.
Add TODO to update filer.ReadFilerConf to support multiple filers for
complete HA. For now, it uses the currently active/healthy filer tracked
by FilerClient which provides reasonable availability.
* Document multipart upload URL HA limitation
Addresses review comment on s3api_object_handlers_multipart.go:442
Add comment documenting that part upload URLs point to the current
active filer (tracked by FilerClient), which is better than always
using the first filer but still creates a potential point of failure
if that filer becomes unavailable during upload.
Suggest TODO solutions:
- Use virtual hostname/load balancer for filers
- Have S3 server proxy uploads to healthy filers
Current behavior provides reasonable availability by using the
currently active/healthy filer rather than being pinned to first filer.
* Document multipart completion Location URL limitation
Addresses review comment on filer_multipart.go:187
Add comment documenting that the Location URL in CompleteMultipartUpload
response points to the current active filer (tracked by FilerClient).
Note that clients should ideally use the S3 API endpoint rather than
this direct URL. If direct access is attempted and the specific filer
is unavailable, the request will fail.
Current behavior uses the currently active/healthy filer rather than
being pinned to the first filer, providing better availability.
* Make credential store use current active filer for HA
Update FilerEtcStore to use a function that returns the current active
filer instead of a fixed address, enabling high availability.
Changes:
- Add SetFilerAddressFunc() method to FilerEtcStore
- Store uses filerAddressFunc instead of fixed filerGrpcAddress
- withFilerClient() calls the function to get current active filer
- Keep SetFilerClient() for backward compatibility (marked deprecated)
- Update S3ApiServer to pass FilerClient.GetCurrentFiler to store
Benefits:
- Credential store now uses currently active/healthy filer
- Automatic failover when filer becomes unavailable
- True HA for credential operations
- Backward compatible with old SetFilerClient interface
This addresses the credential store limitation - no longer pinned to
first filer, uses FilerClient's tracked current active filer.
* Clarify multipart URL comments: filer address not used for uploads
Update comments to reflect that multipart upload URLs are not actually
used for upload traffic - uploads go directly to volume servers.
Key clarifications:
- genPartUploadUrl: Filer address is parsed out, only path is used
- CompleteMultipartUpload Location: Informational field per AWS S3 spec
- Actual uploads bypass filer proxy and go directly to volume servers
The filer address in these URLs is NOT a HA concern because:
1. Part uploads: URL is parsed for path, upload goes to volume servers
2. Location URL: Informational only, clients use S3 endpoint
This addresses the observation that S3 uploads don't go through filers,
only metadata operations do.
* Remove filer address from upload paths - pass path directly
Eliminate unnecessary filer address from upload URLs by passing file
paths directly instead of full URLs that get immediately parsed.
Changes:
- Rename genPartUploadUrl() → genPartUploadPath() (returns path only)
- Rename toFilerUrl() → toFilerPath() (returns path only)
- Update putToFiler() to accept filePath instead of uploadUrl
- Remove URL parsing code (no longer needed)
- Remove net/url import (no longer used)
- Keep old function names as deprecated wrappers for compatibility
Benefits:
- Cleaner code - no fake URL construction/parsing
- No dependency on filer address for internal operations
- More accurate naming (these are paths, not URLs)
- Eliminates confusion about HA concerns
This completely removes the filer address from upload operations - it was
never actually used for routing, only parsed for the path.
* Remove deprecated functions: use new path-based functions directly
Remove deprecated wrapper functions and update all callers to use the
new function names directly.
Removed:
- genPartUploadUrl() → all callers now use genPartUploadPath()
- toFilerUrl() → all callers now use toFilerPath()
- SetFilerClient() → removed along with fallback code
Updated:
- s3api_object_handlers_multipart.go: uploadUrl → filePath
- s3api_object_handlers_put.go: uploadUrl → filePath, versionUploadUrl → versionFilePath
- s3api_object_versioning.go: toFilerUrl → toFilerPath
- s3api_object_handlers_test.go: toFilerUrl → toFilerPath
- auth_credentials.go: removed SetFilerClient fallback
- filer_etc_store.go: removed deprecated SetFilerClient method
Benefits:
- Cleaner codebase with no deprecated functions
- All variable names accurately reflect that they're paths, not URLs
- Single interface for credential stores (SetFilerAddressFunc only)
All code now consistently uses the new path-based approach.
* Fix toFilerPath: remove URL escaping for raw file paths
The toFilerPath function should return raw file paths, not URL-escaped
paths. URL escaping was needed when the path was embedded in a URL
(old toFilerUrl), but now that we pass paths directly to putToFiler,
they should be unescaped.
This fixes S3 integration test failures:
- test_bucket_listv2_encoding_basic
- test_bucket_list_encoding_basic
- test_bucket_listv2_delimiter_whitespace
- test_bucket_list_delimiter_whitespace
The tests were failing because paths were double-encoded (escaped when
stored, then escaped again when listed), resulting in %252B instead of
%2B for '+' characters.
Root cause: When we removed URL parsing in putToFiler, we should have
also removed URL escaping in toFilerPath since paths are now used
directly without URL encoding/decoding.
* Add thread safety to FilerEtcStore and clarify credential store comments
Address review suggestions for better thread safety and code clarity:
1. **Thread Safety**: Add RWMutex to FilerEtcStore
- Protects filerAddressFunc and grpcDialOption from concurrent access
- Initialize() uses write lock when setting function
- SetFilerAddressFunc() uses write lock
- withFilerClient() uses read lock to get function and dial option
- GetPolicies() uses read lock to check if configured
2. **Improved Error Messages**:
- Prefix errors with "filer_etc:" for easier debugging
- "filer address not configured" → "filer_etc: filer address function not configured"
- "filer address is empty" → "filer_etc: filer address is empty"
3. **Clarified Comments**:
- auth_credentials.go: Clarify that initial setup is temporary
- Document that it's updated in s3api_server.go after FilerClient creation
- Remove ambiguity about when FilerClient.GetCurrentFiler is used
Benefits:
- Safe for concurrent credential operations
- Clear error messages for debugging
- Explicit documentation of initialization order
* Enable filer discovery: pass master addresses to FilerClient
Fix two critical issues:
1. **Filer Discovery Not Working**: Master client was not being passed to
FilerClient, so peer discovery couldn't work
2. **Credential Store Design**: Already uses FilerClient via GetCurrentFiler
function - this is the correct design for HA
Changes:
**Command (s3.go):**
- Read master addresses from GetFilerConfiguration response
- Pass masterAddresses to S3ApiServerOption
- Log master addresses for visibility
**S3ApiServerOption:**
- Add Masters []pb.ServerAddress field for discovery
**S3ApiServer:**
- Create MasterClient from Masters when available
- Pass MasterClient + FilerGroup to FilerClient via options
- Enable discovery with 5-minute refresh interval
- Log whether discovery is enabled or disabled
**Credential Store:**
- Already correctly uses filerClient.GetCurrentFiler via function
- This provides HA without tight coupling to FilerClient struct
- Function-based design is clean and thread-safe
Discovery Flow:
1. S3 command reads filer config → gets masters + filer group
2. S3ApiServer creates MasterClient from masters
3. FilerClient uses MasterClient to query for peer filers
4. Background goroutine refreshes peer list every 5 minutes
5. Credential store uses GetCurrentFiler to get active filer
Now filer discovery actually works! ��
* Use S3 endpoint in multipart Location instead of filer address
* Add multi-filer failover to ReadFilerConf
* Address CodeRabbit review: fix buffer reuse and improve lock safety
Address two code review suggestions:
1. **Fix buffer reuse in ReadFilerConfFromFilers**:
- Use local []byte data instead of shared buffer
- Prevents partial data from failed attempts affecting successful reads
- Creates fresh buffer inside callback for masterClient path
- More robust to future changes in read helpers
2. **Improve lock safety in FilerClient**:
- Add *WithHealth variants that accept health pointer
- Get health pointer while holding lock, then release before calling
- Eliminates potential for lock confusion (though no actual deadlock existed)
- Clearer separation: lock for data access, atomics for health ops
Changes:
- ReadFilerConfFromFilers: var data []byte, create buf inside callback
- shouldSkipUnhealthyFilerWithHealth(health *filerHealth)
- recordFilerSuccessWithHealth(health *filerHealth)
- recordFilerFailureWithHealth(health *filerHealth)
- Keep old functions for backward compatibility (marked deprecated)
- Update LookupVolumeIds to use WithHealth variants
Benefits:
- More robust multi-filer configuration reading
- Clearer lock vs atomic operation boundaries
- No lock held during health checks (even though atomics don't block)
- Better code organization and maintainability
* add constant
* Fix IAM manager and post policy to use current active filer
* Fix critical race condition and goroutine leak
* Update weed/s3api/filer_multipart.go
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* Fix compilation error and address code review suggestions
Address remaining unresolved comments:
1. **Fix compilation error**: Add missing net/url import
- filer_multipart.go used url.PathEscape without import
- Added "net/url" to imports
2. **Fix Location URL formatting** (all 4 occurrences):
- Add missing slash between bucket and key
- Use url.PathEscape for bucket names
- Use urlPathEscape for object keys
- Handles special characters in bucket/key names
- Before: http://host/bucketkey
- After: http://host/bucket/key (properly escaped)
3. **Optimize discovery loop** (O(N*M) → O(N+M)):
- Use map for existing filers (O(1) lookup)
- Reduces time holding write lock
- Better performance with many filers
- Before: Nested loop for each discovered filer
- After: Build map once, then O(1) lookups
Changes:
- filer_multipart.go: Import net/url, fix all Location URLs
- filer_client.go: Use map for efficient filer discovery
Benefits:
- Compiles successfully
- Proper URL encoding (handles spaces, special chars)
- Faster discovery with less lock contention
- Production-ready URL formatting
* Fix race conditions and make Close() idempotent
Address CodeRabbit review #3512078995:
1. **Critical: Fix unsynchronized read in error message**
- Line 584 read len(fc.filerAddresses) without lock
- Race with refreshFilerList appending to slice
- Fixed: Take RLock to read length safely
- Prevents race detector warnings
2. **Important: Make Close() idempotent**
- Closing already-closed channel panics
- Can happen with layered cleanup in shutdown paths
- Fixed: Use sync.Once to ensure single close
- Safe to call Close() multiple times now
3. **Nitpick: Add warning for empty filer address**
- getFilerAddress() can return empty string
- Helps diagnose unexpected state
- Added: Warning log when no filers available
4. **Nitpick: Guard deprecated index-based helpers**
- shouldSkipUnhealthyFiler, recordFilerSuccess/Failure
- Accessed filerHealth without lock (races with discovery)
- Fixed: Take RLock and check bounds before array access
- Prevents index out of bounds and races
Changes:
- filer_client.go:
- Add closeDiscoveryOnce sync.Once field
- Use Do() in Close() for idempotent channel close
- Add RLock guards to deprecated index-based helpers
- Add bounds checking to prevent panics
- Synchronized read of filerAddresses length in error
- s3api_server.go:
- Add warning log when getFilerAddress returns empty
Benefits:
- No race conditions (passes race detector)
- No panic on double-close
- Better error diagnostics
- Safe with discovery enabled
- Production-hardened shutdown logic
* Fix hardcoded http scheme and add panic recovery
Address CodeRabbit review #3512114811:
1. **Major: Fix hardcoded http:// scheme in Location URLs**
- Location URLs always used http:// regardless of client connection
- HTTPS clients got http:// URLs (incorrect)
- Fixed: Detect scheme from request
- Check X-Forwarded-Proto header (for proxies) first
- Check r.TLS != nil for direct HTTPS
- Fallback to http for plain connections
- Applied to all 4 CompleteMultipartUploadResult locations
2. **Major: Add panic recovery to discovery goroutine**
- Long-running background goroutine could crash entire process
- Panic in refreshFilerList would terminate program
- Fixed: Add defer recover() with error logging
- Goroutine failures now logged, not fatal
3. **Note: Close() idempotency already implemented**
- Review flagged as duplicate issue
- Already fixed in commit 3d7a65c7e
- sync.Once (closeDiscoveryOnce) prevents double-close panic
- Safe to call Close() multiple times
Changes:
- filer_multipart.go:
- Add getRequestScheme() helper function
- Update all 4 Location URLs to use dynamic scheme
- Format: scheme://host/bucket/key (was: http://...)
- filer_client.go:
- Add panic recovery to discoverFilers()
- Log panics instead of crashing
Benefits:
- Correct scheme (https/http) in Location URLs
- Works behind proxies (X-Forwarded-Proto)
- No process crashes from discovery failures
- Production-hardened background goroutine
- Proper AWS S3 API compliance
* Fix S3 WithFilerClient to use filer failover
Critical fix for multi-filer deployments:
**Problem:**
- S3ApiServer.WithFilerClient() was creating direct connections to ONE filer
- Used pb.WithGrpcClient() with single filer address
- No failover - if that filer failed, ALL operations failed
- Caused test failures: "bucket directory not found"
- IAM Integration Tests failing with 500 Internal Error
**Root Cause:**
- WithFilerClient bypassed filerClient connection management
- Always connected to getFilerAddress() (current filer only)
- Didn't retry other filers on failure
- All getEntry(), updateEntry(), etc. operations failed if current filer down
**Solution:**
1. Added FilerClient.GetAllFilers() method
- Returns snapshot of all filer addresses
- Thread-safe copy to avoid races
2. Implemented withFilerClientFailover()
- Try current filer first (fast path)
- On failure, try all other filers
- Log successful failover
- Return error only if ALL filers fail
3. Updated WithFilerClient()
- Use filerClient for failover when available
- Fallback to direct connection for testing/init
**Impact:**
✅ All S3 operations now support multi-filer failover
✅ Bucket metadata reads work with any available filer
✅ Entry operations (getEntry, updateEntry) failover automatically
✅ IAM tests should pass now
✅ Production-ready HA support
**Files Changed:**
- wdclient/filer_client.go: Add GetAllFilers() method
- s3api/s3api_handlers.go: Implement failover logic
This fixes the test failure where bucket operations failed when
the primary filer was temporarily unavailable during cleanup.
* Update current filer after successful failover
Address code review: https://github.com/seaweedfs/seaweedfs/pull/7550#pullrequestreview-3512223723
**Issue:**
After successful failover, the current filer index was not updated.
This meant every subsequent request would still try the (potentially
unhealthy) original filer first, then failover again.
**Solution:**
1. Added FilerClient.SetCurrentFiler(addr) method:
- Finds the index of specified filer address
- Atomically updates filerIndex to point to it
- Thread-safe with RLock
2. Call SetCurrentFiler after successful failover:
- Update happens immediately after successful connection
- Future requests start with the known-healthy filer
- Reduces unnecessary failover attempts
**Benefits:**
✅ Subsequent requests use healthy filer directly
✅ No repeated failover to same unhealthy filer
✅ Better performance - fast path hits healthy filer
✅ Comment now matches actual behavior
* Integrate health tracking with S3 failover
Address code review suggestion to leverage existing health tracking
instead of simple iteration through all filers.
**Changes:**
1. Added address-based health tracking API to FilerClient:
- ShouldSkipUnhealthyFiler(addr) - check circuit breaker
- RecordFilerSuccess(addr) - reset failure count
- RecordFilerFailure(addr) - increment failure count
These methods find the filer by address and delegate to
existing *WithHealth methods for actual health management.
2. Updated withFilerClientFailover to use health tracking:
- Record success/failure for every filer attempt
- Skip unhealthy filers during failover (circuit breaker)
- Only try filers that haven't exceeded failure threshold
- Automatic re-check after reset timeout
**Benefits:**
✅ Circuit breaker prevents wasting time on known-bad filers
✅ Health tracking shared across all operations
✅ Automatic recovery when unhealthy filers come back
✅ Reduced latency - skip filers in failure state
✅ Better visibility with health metrics
**Behavior:**
- Try current filer first (fast path)
- If fails, record failure and try other HEALTHY filers
- Skip filers with failureCount >= threshold (default 3)
- Re-check unhealthy filers after resetTimeout (default 30s)
- Record all successes/failures for health tracking
* Update weed/wdclient/filer_client.go
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* Enable filer discovery with empty filerGroup
Empty filerGroup is a valid value representing the default group.
The master client can discover filers even when filerGroup is empty.
**Change:**
- Remove the filerGroup != "" check in NewFilerClient
- Keep only masterClient != nil check
- Empty string will be passed to ListClusterNodes API as-is
This enables filer discovery to work with the default group.
---------
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* Add a way to use a JWT in an HTTP only cookie
If a JWT is not included in the Authorization header or a query string, attempt to get a JWT from an HTTP only cookie.
* Added a way to specify allowed origins header from config
* Removed unecessary log
* Check list of domains from config or command flag
* Handle default wildcard and change name of config value to cors
* remove old raft servers if they don't answer to pings for too long
add ping durations as options
rename ping fields
fix some todos
get masters through masterclient
raft remove server from leader
use raft servers to ping them
CheckMastersAlive for hashicorp raft only
* prepare blocking ping
* pass waitForReady as param
* pass waitForReady through all functions
* waitForReady works
* refactor
* remove unneeded params
* rollback unneeded changes
* fix
Running mount outside of the cluster would not need to expose all the volume servers to outside of the cluster. The chunk read and write will go through the filer.
1. option for "weed s3 -filer.dir.buckets" to choose a folder for buckets
2. create a bucket
3. delete a bucket, recursively delete all metadata on filer
Chris Lu