mirror of
https://github.com/seaweedfs/seaweedfs.git
synced 2026-09-10 16:40:46 +02:00
c2cdefd06d89f4510dfe06508eee7ea5aa49d607
15
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Chris Lu
|
eef6f3d1e6 |
s3tables: add the maintenance configuration APIs (#10773)
* s3tables: add the maintenance configuration APIs Stores the configuration verbatim as the wire shape under a new s3tables.maintenance extended attribute, so Get hands back what Put took and no translation layer can drift from the AWS model. Nothing reads the configuration yet. Put merges a single type into the stored map so configuring compaction does not drop snapshot management, and asserts the attribute's prior value so two concurrent Puts cannot silently clobber each other. * iceberg: apply the maintenance configuration in the worker The worker now reads the per-table and per-bucket maintenance configuration written by the control plane, so the wildcard plugin config is a default rather than the only setting a table can have. Table properties still win by default, since a table declaring its own layout is what every engine honours and the compactor has to agree with whoever writes the files. Clearing table_properties_override makes the maintenance configuration authoritative instead. Status is not part of that contest: a disabled type drops its operations and no property can re-enable them, so the operator's kill switch always holds. Manifest and delete-file rewrites have no AWS equivalent and ride with compaction. Detection reads both attributes from entries it already lists. * s3tables: report maintenance job status The worker records the outcome of each run in its own extended attribute, separate from the configuration so operator and worker writes do not contend, and GetTableMaintenanceJobStatus reads it back. Only the types a run touched are written, so a partial run cannot erase what an earlier one recorded. The reader fills in the rest: Disabled when the configuration switched a type off, Not_Yet_Run otherwise. Status is advisory, so a lost race is logged rather than failing a job whose work already committed. * s3tables: route the maintenance APIs over REST The five actions were only reachable by X-Amz-Target dispatch, which the AWS CLI and SDK do not use for this service. They address the operations by path, so the APIs were unreachable from any official client. * s3tables: fix the table bucket ARN field name GetTableBucketMaintenanceConfiguration emitted tableBucketArn where the wire field is tableBucketARN, as every other response in this package already spells it. Official SDK deserializers ignore the unknown key, so the required field came back unset. * s3tables: carry the compaction strategy through to the worker IcebergCompactionSettings modelled only targetFileSizeMB, so a request naming a strategy was accepted and then dropped on the way to storage. The worker now maps binpack and sort onto its own rewrite strategy and lets auto defer to the worker configuration. z-order is rejected rather than accepted and quietly binpacked. * s3tables: report bucket-level maintenance status GetTableMaintenanceJobStatus read only the table's configuration, so unreferenced file removal — which is configured on the bucket — reported Not_Yet_Run or a stale success after an operator disabled it. The merge helper now lives in this package and the worker shares it. * iceberg: delete orphans only after the non-current window AWS marks a file non-current once it has been unreferenced for unreferencedDays, then deletes it a further nonCurrentDays later. The cutoff was taken from unreferencedDays alone, so a 3/10 configuration hard-deleted on day three and threw away the ten day recovery window. remove_orphans deletes in one step rather than marking, so the cutoff is now the sum of the two. * s3tables: assert every attribute when rewriting an entry UpdateEntry writes the whole entry back from the snapshot the caller read, and its precondition only covers the keys the caller names. Both maintenance writers named one key, so a job status write could revert a maintenance configuration an operator had just disabled, turning an advisory write into a silent re-enable. Both now assert the entry's full attribute set, including the target key when absent so a concurrent create also fails the precondition. * s3tables: assert absent attributes when rewriting an entry The precondition covered the attributes present when the writer read the entry, so an attribute created between that read and the write was absent from it. A first-time PutTableMaintenanceConfiguration disabling a type therefore lands, passes the per-key checks, and is then deleted by the stale whole-entry write. Every attribute this package stores is now asserted, absent ones included. The metadata commit and planning index writers rewrite the same entries and had the same exposure, so both use the shared snapshot too. * iceberg: implement the auto compaction strategy auto was accepted, stored and read back, but left the worker on its own default, so a sorted table configured as auto was compacted with binpack. AWS defines auto as sorting tables that declare a sort order and bin-packing the rest. That needs the table metadata, so the choice is made where the rewrite plan is resolved: an unsorted table falls back to binpack rather than failing the way an explicit sort request does. * s3tables: validate the maintenance setting ranges PUT accepted zero, negative and oversized values for every numeric setting. The worker then ignores a non-positive value and saturates an oversized one, so the configuration read back was not the one that ran. AWS bounds all five to 1..2147483647, which is now enforced. The fields are pointers so an explicit zero is distinguishable from an omitted one and can be rejected rather than silently ignored. * s3tables: give every entry writer the same compare-and-swap updateExtendedAttribute asserted the entry's attributes, but the helpers behind the metadata, policy and tag handlers still wrote the whole entry unconditionally. Any of them could land on a stale snapshot and delete a maintenance configuration an operator had just written. They all share one read-modify-write loop now, so the precondition and the bounded retry apply wherever an entry is rewritten. * s3tables: move the maintenance configuration with a renamed table RenameTable carried the metadata, version, policy and tags to the new name but left the maintenance configuration and job status behind. A table with snapshot management disabled came back enabled under its new name, and the stale configuration stayed on the old name where a table created there would inherit it. The decoupled-delete cleanup left the same two attributes behind. * s3tables: accept every AWS partition in ARNs The route regexes and the ARN patterns both hardcoded arn:aws, so valid aws-cn and aws-us-gov ARNs never reached a handler. The router now shares the partition-tolerant prefix with the parser, and a generated ARN uses the partition its region belongs to so it parses back. * s3tables: generate ARNs in the region's partition The handler's own ARN generators still formatted arn:aws directly rather than going through the partition-aware builder, so a China or GovCloud deployment routed the request but then returned a commercial ARN and matched IAM policies against it. The round-trip test missed this because parsing accepts any partition, so it now asserts the prefix the region implies. * s3tables: complete the ARN partition table aws-iso-e, aws-iso-f and aws-eusc were missing, so eu-isoe-*, us-isof-* and eusc-* regions fell through to the commercial partition. * s3tables: do not let a rename swallow a concurrent maintenance write Rename copied the source attributes early and cleared the source at the end, so a Put landing in between missed the copy to the destination and was then deleted by the cleanup. It succeeded and vanished. The cleanup now clears the source only while it still holds exactly what was copied, and returns a conflict otherwise. Put checks the catalog identity inside the same conditional mutation, so it also cannot write to a name that a rename or delete has already soft-deleted. |
||
|
Chris Lu
|
1ce106e69d |
s3: audit the assumed-role principal and the STS caller (#10519)
* s3: log the requester's principal ARN in the audit entry An STS session authenticates as an opaque session subject, so requester alone gave an operator no way back to the assumed role or the session name. Record the principal ARN next to the identity name and emit it as requester_arn. * s3: record the caller identity in the STS handlers AssumeRole, GetFederationToken and GetCallerIdentity verify the caller themselves and are not wrapped by the auth middleware that records the identity, so every audit entry for minting a session had an empty requester. * s3: resolve the audit principal ARN the way policy evaluation does A JWT-authenticated identity carries no PrincipalArn — the auth layer hands the principal over in a request header — so reading the field directly left requester_arn empty for OIDC callers. buildPrincipalARN is the resolver the policy path already uses: header first, then the identity's own ARN, then a synthesized user ARN for legacy identities that have none. |
||
|
Chris Lu
|
f72983c1fd |
fix(s3): stop S3 Tables routes from swallowing buckets named "buckets" or "get-table" (#9566)
* fix(s3): stop S3 Tables routes from swallowing buckets named "buckets" or "get-table"
The S3 Tables REST endpoints share top-level paths with the regular S3
API (/buckets for ListTableBuckets/CreateTableBucket, /get-table for
GetTable). They are registered first on the same router as the bucket
subrouter, so a path-style request such as GET /buckets?list-type=2 on
a bucket actually named "buckets" matched ListTableBuckets and returned
JSON. AWS SDK V2 (and Hadoop s3a / Spark) then failed XML parsing with
"Unexpected character '{' (code 123) in prolog".
Disambiguate by requiring the AWS V4 credential scope to name the
s3tables service on the colliding routes. Regular S3 SDKs sign with
service=s3, S3 Tables SDKs sign with service=s3tables, and the scope is
present in both the Authorization header and the X-Amz-Credential query
parameter for presigned URLs, so the matcher works for both flavors.
ARN-bearing S3 Tables routes (/buckets/<arn>, /namespaces/<arn>, etc.)
already cannot collide because colons are not valid in bucket names, so
they are left untouched.
* fix(s3): accept AWS JSON RPC content type as S3 Tables intent signal
The Iceberg catalog integration tests send unsigned PUT /buckets with
Content-Type: application/x-amz-json-1.1 to create table buckets. With
only the credential-scope check, those requests fell through to the
regular S3 CreateBucket handler and the suite went red on this branch.
Extend the matcher so a request is recognized as S3 Tables when either:
- its AWS V4 credential scope names SERVICE=s3tables; or
- it carries the canonical AWS JSON RPC 1.1 content type and is
unsigned (a request explicitly signed for SERVICE=s3 still wins).
The regular S3 SDKs do not send application/x-amz-json-1.1, so the
signal is safe for the colliding paths (/buckets, /get-table).
Also add an AWS SDK V2 for Go integration test under
test/s3/sdk_v2_routing/ that drives the SDK's own XML deserializer
against a bucket literally named "buckets" and "get-table" — the SDK
errors before the test asserts if the server returns the wrong body
shape. Wired up via .github/workflows/s3-sdk-v2-routing-tests.yml,
mirroring the etag/acl workflow.
* s3api: extend service matcher to all S3 Tables routes; simplify scope check
- Apply serviceMatcher to every S3 Tables route, not just the bare-path
ones. ARN-bearing paths could otherwise be hit by an S3 object key
that starts with arn:aws:s3tables:..., inside a bucket named
"buckets", "namespaces", "tables", or "tag". One matcher everywhere
closes both collision classes.
- Replace strings.Split + index lookup with strings.Contains for the
credential-scope check. The scope shape is fixed at
AK/DATE/REGION/SERVICE/aws4_request, slashes only delimit components,
and access keys are alphanumeric — so /s3tables/ matches iff SERVICE
is exactly s3tables. Existing unit cases (including the
access-key-substring case) still pass.
- Read the GetObject body in the SDK v2 routing test with io.ReadAll;
the single Read could return short and make the equality check flaky.
* s3api: drop content-type fallback; sign s3 tables harness traffic instead
The content-type fallback in isS3TablesSignedRequest let an anonymous
regular-S3 request whose body type is application/x-amz-json-1.1 hit
an S3 Tables route when the path-style object key happened to be
shaped like an S3 Tables ARN (e.g. PutObject on bucket "buckets"
with key arn:aws:s3tables:.../bucket/foo/policy). Narrow the matcher
back to the AWS V4 credential scope so only requests signed for
SERVICE=s3tables match the S3 Tables routes.
Update the Iceberg catalog test harness — the only caller still
sending unsigned PUT /buckets — to sign with SERVICE=s3tables. The
mini instance runs in default-allow mode, so the signature itself is
not verified; only the credential scope matters for the route match.
Drop the stale unit cases for the JSON-RPC content-type signal and
the routing test that exercised unsigned harness traffic.
|
||
|
Chris Lu
|
36c469e34e |
Enforce IAM for S3 Tables bucket creation (#8388)
* Enforce IAM for s3tables bucket creation * Prefer IAM path when policies exist * Ensure IAM enforcement honors default allow * address comments * Reused the precomputed principal when setting tableBucketMetadata.OwnerAccountID, avoiding the redundant getAccountID call. * get identity * fix * dedup * fix * comments * fix tests * update iam config * go fmt * fix ports * fix flags * mini clean shutdown * Revert "update iam config" This reverts commit |
||
|
Chris Lu
|
0d8588e3ae |
S3: Implement IAM defaults and STS signing key fallback (#8348)
* S3: Implement IAM defaults and STS signing key fallback logic * S3: Refactor startup order to init SSE-S3 key manager before IAM * S3: Derive STS signing key from KEK using HKDF for security isolation * S3: Document STS signing key fallback in security.toml * fix(s3api): refine anonymous access logic and secure-by-default behavior - Initialize anonymous identity by default in `NewIdentityAccessManagement` to prevent nil pointer exceptions. - Ensure `ReplaceS3ApiConfiguration` preserves the anonymous identity if not present in the new configuration. - Update `NewIdentityAccessManagement` signature to accept `filerClient`. - In legacy mode (no policy engine), anonymous defaults to Deny (no actions), preserving secure-by-default behavior. - Use specific `LookupAnonymous` method instead of generic map lookup. - Update tests to accommodate signature changes and verify improved anonymous handling. * feat(s3api): make IAM configuration optional - Start S3 API server without a configuration file if `EnableIam` option is set. - Default to `Allow` effect for policy engine when no configuration is provided (Zero-Config mode). - Handle empty configuration path gracefully in `loadIAMManagerFromConfig`. - Add integration test `iam_optional_test.go` to verify empty config behavior. * fix(iamapi): fix signature mismatch in NewIdentityAccessManagementWithStore * fix(iamapi): properly initialize FilerClient instead of passing nil * fix(iamapi): properly initialize filer client for IAM management - Instead of passing `nil`, construct a `wdclient.FilerClient` using the provided `Filers` addresses. - Ensure `NewIdentityAccessManagementWithStore` receives a valid `filerClient` to avoid potential nil pointer dereferences or limited functionality. * clean: remove dead code in s3api_server.go * refactor(s3api): improve IAM initialization, safety and anonymous access security * fix(s3api): ensure IAM config loads from filer after client init * fix(s3): resolve test failures in integration, CORS, and tagging tests - Fix CORS tests by providing explicit anonymous permissions config - Fix S3 integration tests by setting admin credentials in init - Align tagging test credentials in CI with IAM defaults - Added goroutine to retry IAM config load in iamapi server * fix(s3): allow anonymous access to health targets and S3 Tables when identities are present * fix(ci): use /healthz for Caddy health check in awscli tests * iam, s3api: expose DefaultAllow from IAM and Policy Engine This allows checking the global "Open by Default" configuration from other components like S3 Tables. * s3api/s3tables: support DefaultAllow in permission logic and handler Updated CheckPermissionWithContext to respect the DefaultAllow flag in PolicyContext. This enables "Open by Default" behavior for unauthenticated access in zero-config environments. Added a targeted unit test to verify the logic. * s3api/s3tables: propagate DefaultAllow through handlers Propagated the DefaultAllow flag to individual handlers for namespaces, buckets, tables, policies, and tagging. This ensures consistent "Open by Default" behavior across all S3 Tables API endpoints. * s3api: wire up DefaultAllow for S3 Tables API initialization Updated registerS3TablesRoutes to query the global IAM configuration and set the DefaultAllow flag on the S3 Tables API server. This completes the end-to-end propagation required for anonymous access in zero-config environments. Added a SetDefaultAllow method to S3TablesApiServer to facilitate this. * s3api: fix tests by adding DefaultAllow to mock IAM integrations The IAMIntegration interface was updated to include DefaultAllow(), breaking several mock implementations in tests. This commit fixes the build errors by adding the missing method to the mocks. * env * ensure ports * env * env * fix default allow * add one more test using non-anonymous user * debug * add more debug * less logs |
||
|
Chris Lu
|
5c365e7090 |
s3api: return 400 for invalid namespace query in REST table routes (#8296)
* s3api: reject invalid namespace query in REST table routes * s3api: expand namespace validation REST tests |
||
|
Chris Lu
|
be26ce74ce | s3tables: support multi-level namespace normalization | ||
|
Chris Lu
|
a3b83f8808 |
test: add Trino Iceberg catalog integration test (#8228)
* test: add Trino Iceberg catalog integration test - Create test/s3/catalog_trino/trino_catalog_test.go with TestTrinoIcebergCatalog - Tests integration between Trino SQL engine and SeaweedFS Iceberg REST catalog - Starts weed mini with all services and Trino in Docker container - Validates Iceberg catalog schema creation and listing operations - Uses native S3 filesystem support in Trino with path-style access - Add workflow job to s3-tables-tests.yml for CI execution * fix: preserve AWS environment credentials when replacing S3 configuration When S3 configuration is loaded from filer/db, it replaces the identities list and inadvertently removes AWS_ACCESS_KEY_ID credentials that were added from environment variables. This caused auth to remain disabled even though valid credentials were present. Fix by preserving environment-based identities when replacing the configuration and re-adding them after the replacement. This ensures environment credentials persist across configuration reloads and properly enable authentication. * fix: use correct ServerAddress format with gRPC port encoding The admin server couldn't connect to master because the master address was missing the gRPC port information. Use pb.NewServerAddress() which properly encodes both HTTP and gRPC ports in the address string. Changes: - weed/command/mini.go: Use pb.NewServerAddress for master address in admin - test/s3/policy/policy_test.go: Store and use gRPC ports for master/filer addresses This fix applies to: 1. Admin server connection to master (mini.go) 2. Test shell commands that need master/filer addresses (policy_test.go) * move * move * fix: always include gRPC port in server address encoding The NewServerAddress() function was omitting the gRPC port from the address string when it matched the port+10000 convention. However, gRPC port allocation doesn't always follow this convention - when the calculated port is busy, an alternative port is allocated. This caused a bug where: 1. Master's gRPC port was allocated as 50661 (sequential, not port+10000) 2. Address was encoded as '192.168.1.66:50660' (gRPC port omitted) 3. Admin client called ToGrpcAddress() which assumed port+10000 offset 4. Admin tried to connect to 60660 but master was on 50661 → connection failed Fix: Always include explicit gRPC port in address format (host:httpPort.grpcPort) unless gRPC port is 0. This makes addresses unambiguous and works regardless of the port allocation strategy used. Impacts: All server-to-server gRPC connections now use properly formatted addresses. * test: fix Iceberg REST API readiness check The Iceberg REST API endpoints require authentication. When checked without credentials, the API returns 403 Forbidden (not 401 Unauthorized). The readiness check now accepts both auth error codes (401/403) as indicators that the service is up and ready, it just needs credentials. This fixes the 'Iceberg REST API did not become ready' test failure. * Fix AWS SigV4 signature verification for base64-encoded payload hashes AWS SigV4 canonical requests must use hex-encoded SHA256 hashes, but the X-Amz-Content-Sha256 header may be transmitted as base64. Changes: - Added normalizePayloadHash() function to convert base64 to hex - Call normalizePayloadHash() in extractV4AuthInfoFromHeader() - Added encoding/base64 import Fixes 403 Forbidden errors on POST requests to Iceberg REST API when clients send base64-encoded content hashes in the header. Impacted services: Iceberg REST API, S3Tables * Fix AWS SigV4 signature verification for base64-encoded payload hashes AWS SigV4 canonical requests must use hex-encoded SHA256 hashes, but the X-Amz-Content-Sha256 header may be transmitted as base64. Changes: - Added normalizePayloadHash() function to convert base64 to hex - Call normalizePayloadHash() in extractV4AuthInfoFromHeader() - Added encoding/base64 import - Removed unused fmt import Fixes 403 Forbidden errors on POST requests to Iceberg REST API when clients send base64-encoded content hashes in the header. Impacted services: Iceberg REST API, S3Tables * pass sigv4 * s3api: fix identity preservation and logging levels - Ensure environment-based identities are preserved during config replacement - Update accessKeyIdent and nameToIdentity maps correctly - Downgrade informational logs to V(2) to reduce noise * test: fix trino integration test and s3 policy test - Pin Trino image version to 479 - Fix port binding to 0.0.0.0 for Docker connectivity - Fix S3 policy test hang by correctly assigning MiniClusterCtx - Improve port finding robustness in policy tests * ci: pre-pull trino image to avoid timeouts - Pull trinodb/trino:479 after Docker setup - Ensure image is ready before integration tests start * iceberg: remove unused checkAuth and improve logging - Remove unused checkAuth method - Downgrade informational logs to V(2) - Ensure loggingMiddleware uses a status writer for accurate reported codes - Narrow catch-all route to avoid interfering with other subsystems * iceberg: fix build failure by removing unused s3api import * Update iceberg.go * use warehouse * Update trino_catalog_test.go |
||
|
Chris Lu
|
b2b0a38e71 |
s3api: allow empty region and account id in s3tables ARN (#8171)
* s3api: allow empty region and account id in s3tables ARN * s3api: refactor S3 Tables ARN regex into a constant |
||
|
Chris LuandCopilot
|
f1e27b8f30 |
s3: change s3 tables to use RESTful API (#8169)
* s3: refactor s3 tables to use RESTful API * test/s3tables: guard empty namespaces * s3api: document tag parsing and validate get-table * s3api: limit S3Tables REST body size * Update weed/s3api/s3api_tables.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * Update weed/s3api/s3tables/handler.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> * s3api: accept encoded table bucket ARNs * s3api: validate namespaces and close body * s3api: match encoded table bucket ARNs * s3api: scope table bucket ARN routes * s3api: dedupe table bucket request builders * test/s3tables: allow list tables without namespace * s3api: validate table params and tag ARN * s3api: tighten tag handling and get-table params * s3api: loosen tag ARN route matching * Fix S3 Tables REST routing and tests * Adjust S3 Tables request parsing * Gate S3 Tables target routing * Avoid double decoding namespaces --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |
||
|
Chris Lu
|
b7c1eba0a1 |
S3 Tables: secure API router with IAM authentication
- Wrap S3 Tables handler with authenticateS3Tables. - Use AuthSignatureOnly to enforce valid credentials while delegating granular authorization to handlers. - Prevent anonymous access to all S3 Tables endpoints. |
||
|
Chris Lu
|
04514071a7 |
s3tables: implement granular authorization and refine error responses
- Remove mandatory ACTION_ADMIN at the router level - Enforce granular permissions in bucket and namespace handlers - Prioritize AccountID in ExtractPrincipalFromContext for ARN matching - Distinguish between 404 (NoSuchBucket) and 500 (InternalError) in metadata lookups - Clean up unused imports in s3api_tables.go |
||
|
Chris Lu
|
08ee4e37d8 | s3tables: clean up unused code and improve error response formatting | ||
|
Chris Lu
|
1b9c8b8614 |
s3api_tables: optimize action validation with map lookup
- Replace O(n) slice iteration with O(1) map lookup - Move s3TablesActionsMap to package level - Avoid recreating the map on every function call - Improves performance for request validation |
||
|
Chris Lu
|
b1b922d757 |
s3api: add S3 Tables integration layer
- Create s3api_tables.go to integrate S3 Tables with S3 API server - Implement S3 Tables route matcher for X-Amz-Target header - Register S3 Tables routes with API router - Provide gRPC filer client interface for S3 Tables handlers - All S3 Tables operations accessible via S3 API endpoint |