3 Commits

Include renames

Author	SHA1	Message	Date
Chris Lu	c40db5a52d	perf(filer): parallelize StreamMutateEntry with path-keyed scheduler (#9171) ... * perf(filer): parallelize StreamMutateEntry with path-keyed scheduler The server handler processed one mutation at a time per stream, capping a mount's aggregate throughput at ~1/filer_store_service_time regardless of client concurrency (see issue #9138). With 12 rclone processes this showed as a ~500 QPS ceiling on a filer that previously served ~1000+ QPS via unary CreateEntry. Replace the serial for-loop with a per-request goroutine admitted by a path-keyed scheduler, adapted directly from filer.sync's MetadataProcessor (weed/command/filer_sync_jobs.go). Same four conflict indexes, same kind taxonomy (file / barrier-dir / non-barrier-dir), same ancestor-barrier and descendant-barrier rules. Cross-path mutations run in parallel; same- path mutations serialize on arrival order; recursive delete and directory rename act as subtree barriers; directory attribute bumps stay non-barrier so they do not serialize file writes under them. Correctness and safety: - Per-stream goroutine cap (streamMutateConcurrency = 64) bounds resource use from a single noisy mount. - syncStream wrapper serializes stream.Send across worker goroutines (gRPC Send is not concurrent-safe). - Handler waits on in-flight workers before returning on recv EOF/error so no worker writes to a torn-down stream. - First fatal Send error from any worker propagates as the handler's return, causing the stream to tear down. Benchmark (2 ms simulated filer-store service delay, 12 client workers): serial : 440 QPS sem only : 4902 QPS (unsafe — reorders same-path ops) scheduler : 4934 QPS on distinct paths, 439 QPS on same path (correct) The sem-only number shows the upper bound of raw parallelism; the scheduler matches it on distinct paths (the realistic 12-rclone case) and correctly falls back to serial when the workload demands ordering. Peak concurrent mutations at the handler equals client worker count on the distinct-path workload and pins to 1 on the same-path workload, as the scheduler intends. * perf(filer): decouple StreamMutateEntry admission from receive loop The previous StreamMutateEntry handler called sched.Admit directly in the Recv loop. A single request conflicting on path /hot would head-of-line block stream.Recv, so later requests targeting unrelated paths could not be received or admitted until /hot drained — cross-path parallelism then depended on request ordering instead of being a property of the scheduler. Spawn the worker goroutine immediately on Recv and move sched.Admit into that goroutine. A new streamMutatePendingLimit (1024) caps total per- stream outstanding goroutines (pending + active) so a client flooding a conflicted path cannot explode goroutine count without bound. Addresses #9171 review comment (coderabbitai, Major). * fix(filer): reply with EINVAL on unknown StreamMutateEntry request type Returning nil when req.Request is a future oneof variant or a malformed request left the client's per-RequestId waiter blocked forever, because no response was ever sent for that id. Reply with IsLast=true and EINVAL so the waiter completes with a well-formed error. Addresses #9171 review comments (gemini-code-assist, coderabbitai). * fix(filer): make classifyMutation crash-free and correct for deletes Two issues addressed together because they share one function: 1. Nil-entry panic. classifyMutation dereferenced req.Entry.Name without a nil guard; an empty create_request / update_request / rename_request from a misbehaving client crashed the scheduler. Guard each oneof variant and fall back to a "/" barrier; the handler then sends EINVAL via the unknown-request path. 2. Non-recursive delete vs concurrent dir attribute update. DeleteEntry- Request does not carry IsDirectory, so the previous kindMutateFile classification for non-recursive deletes did not conflict with an in- flight kindMutateNonBarrierDir (chmod / xattr / mtime) at the same path — a race in scheduler terms. Classify every delete as kindMutateBarrierDir regardless of IsRecursive. The incremental cost of a descendant-wait for a non-recursive delete of a non-empty dir is negligible since that call fails at the store anyway. Adds classifyMutation tests for malformed create/update, empty oneof, and updates the delete-non-recursive case to the new expected kind. Addresses #9171 review comments (coderabbitai Critical, Major). * fix(filer): route renameStreamProxy.SendMsg through the wrapping Send The default pass-through SendMsg on renameStreamProxy bypassed the syncStream mutex and the StreamMutateEntryResponse wrapping: anything the rename helpers happened to push via SendMsg would have been emitted on the wire as the wrong protobuf type and could interleave with other workers' Sends. RecvMsg similarly raced with the outer StreamMutateEntry Recv loop and could steal unrelated mutation requests. Route SendMsg through the wrapping Send (rejecting other payload types) and fail RecvMsg explicitly — the rename logic is a strictly server-push stream and never calls RecvMsg, so loud failure is safer than silent stealing. Addresses #9171 review comment (coderabbitai, Major). * test(filer): run exactly ops in stream-mutate workloads perGoroutine := ops / concurrency silently truncated the total when the values were not divisible — e.g. 2400 ops with 64 workers actually ran 2368 and with 256 workers ran 2304, making the logged "ops per run" inaccurate and introducing measurement noise that varied across the concurrency sweep. Introduce opsForWorker(g, concurrency, ops) which distributes the remainder to the first (ops % concurrency) workers so the three workloads (unary, stream sync, stream async) each dispatch exactly `ops` operations. No changes to the timing methodology. Addresses #9171 review comment (coderabbitai, Minor). * fix(filer): enforce per-path FIFO admission in mutateScheduler sync.Cond.Broadcast wakes every waiter; the first to re-acquire the mutex wins, so two conflicting same-path admissions could be reordered by the Go runtime even though they arrived serially on the stream. A single stream is supposed to carry ordered mutations — the PR's original #8770 claim — so admission must be FIFO per path. Replace the single cond with a per-path FIFO queue. Each Admit enqueues a waiter on every path it touches (primary, and on rename the secondary too) and blocks on a ready channel. tryPromoteLocked admits any waiter that is at the head of every queue it joined, passes pathConflictsLocked against the active-state indexes, and is under concurrencyLimit. Done removes the heads and re-runs tryPromoteLocked so waiters freed by the completion move in arrival order. Side effect: two non-barrier directory updates on the same path now serialize instead of overlapping. filer.sync's MetadataProcessor intentionally allows them to overlap because its events come from a committed log where last-writer-wins coalescing is safe; streamed mutations carry client operations whose order matters, so we drop that optimization here. Added TestAdmitSamePathFIFO (20-waiter barrier release) and TestAdmitSamePathNonBarrierSerializes to cover both. Also refreshed the kindMutateFile doc comment that still referenced the pre-#1ecf805f5 "non-recursive delete" classification. Addresses #9171 review comments (coderabbitai Critical, Minor). * test(filer): make TestAdmitSamePathFIFO deterministic without sleeps The previous arrival-ordering sync (send to `started` before calling Admit, plus a 1 ms sleep) relied on the goroutine actually entering Admit and reaching the per-path queue during that sleep. Under -race on a loaded CI that is a real flake source, which is ironic for a test whose job is catching non-deterministic wake-ups. Observe the scheduler's own pathQueue length between spawns instead — waitQueueLen polls s.pathQueue["/a"] under s.mu until the expected number of waiters (1 barrier holder + i+1 file waiters) is enqueued. That's the exact event the test wants to synchronise on, so there is no fudge factor. Verified by `go test -race -count=5`. Addresses #9171 review comment (coderabbitai, Minor).	2026-04-21 11:25:09 -07:00
Chris Lu	e648c76bcf	go fmt	2026-04-10 17:31:14 -07:00
Chris Lu	94bfa2b340	mount: stream all filer mutations over single ordered gRPC stream (#8770) ... * filer: add StreamMutateEntry bidi streaming RPC Add a bidirectional streaming RPC that carries all filer mutation types (create, update, delete, rename) over a single ordered stream. This eliminates per-request connection overhead for pipelined operations and guarantees mutation ordering within a stream. The server handler delegates each request to the existing unary handlers (CreateEntry, UpdateEntry, DeleteEntry) and uses a proxy stream adapter for rename operations to reuse StreamRenameEntry logic. The is_last field signals completion for multi-response operations (rename sends multiple events per request; create/update/delete always send exactly one response with is_last=true). * mount: add streaming mutation multiplexer (streamMutateMux) Implement a client-side multiplexer that routes all filer mutation RPCs (create, update, delete, rename) over a single bidirectional gRPC stream. Multiple goroutines submit requests through a send channel; a dedicated sendLoop serializes them on the stream; a recvLoop dispatches responses to waiting callers via per-request channels. Key features: - Lazy stream opening on first use - Automatic reconnection on stream failure - Permanent fallback to unary RPCs if filer returns Unimplemented - Monotonic request_id for response correlation - Multi-response support for rename operations (is_last signaling) The mux is initialized on WFS and closed during unmount cleanup. No call sites use it yet — wiring comes in subsequent commits. * mount: route CreateEntry and UpdateEntry through streaming mux Wire all CreateEntry call sites to use wfs.streamCreateEntry() which routes through the StreamMutateEntry stream when available, falling back to unary RPCs otherwise. Also wire Link's UpdateEntry calls through wfs.streamUpdateEntry(). Updated call sites: - flushMetadataToFiler (file flush after write) - Mkdir (directory creation) - Symlink (symbolic link creation) - createRegularFile non-deferred path (Mknod) - flushFileMetadata (periodic metadata flush) - Link (hard link: update source + create link + rollback) * mount: route UpdateEntry and DeleteEntry through streaming mux Wire remaining mutation call sites through the streaming mux: - saveEntry (Setattr/chmod/chown/utimes) → streamUpdateEntry - Unlink → streamDeleteEntry (replaces RemoveWithResponse) - Rmdir → streamDeleteEntry (replaces RemoveWithResponse) All filer mutations except Rename now go through StreamMutateEntry when the filer supports it, with automatic unary RPC fallback. * mount: route Rename through streaming mux Wire Rename to use streamMutate.Rename() when available, with fallback to the existing StreamRenameEntry unary stream. The streaming mux sends rename as a StreamRenameEntryRequest oneof variant. The server processes it through the existing rename logic and sends multiple StreamRenameEntryResponse events (one per moved entry), with is_last=true on the final response. All filer mutations now go through a single ordered stream. * mount: fix stream mux connection ownership WithGrpcClient(streamingMode=true) closes the gRPC connection when the callback returns, destroying the stream. Own the connection directly via pb.GrpcDial so it stays alive for the stream's lifetime. Close it explicitly in recvLoop on stream failure and in Close on shutdown. * mount: fix rename failure for deferred-create files Three fixes for rename operations over the streaming mux: 1. lookupEntry: fall back to local metadata store when filer returns "not found" for entries in uncached directories. Files created with deferFilerCreate=true exist only in the local leveldb store until flushed; lookupEntry skipped the local store when the parent directory had never been readdir'd, causing rename to fail with ENOENT. 2. Rename: wait for pending async flushes and force synchronous flush of dirty metadata before sending rename to the filer. Covers the writebackCache case where close() defers the flush to a background worker that may not complete before rename fires. 3. StreamMutateEntry: propagate rename errors from server to client. Add error/errno fields to StreamMutateEntryResponse so the mount can map filer errors to correct FUSE status codes instead of silently returning OK. Also fix the existing Rename error handler which could return fuse.OK on unrecognized errors. * mount: fix streaming mux error handling, sendLoop lifecycle, and fallback Address PR review comments: 1. Server: populate top-level Error/Errno on StreamMutateEntryResponse for create/update/delete errors, not just rename. Previously update errors were silently dropped and create/delete errors were only in nested response fields that the client didn't check. 2. Client: check nested error fields in CreateEntry (ErrorCode, Error) and DeleteEntry (Error) responses, matching CreateEntryWithResponse behavior. 3. Fix sendLoop lifecycle: give each stream generation a stopSend channel. recvLoop closes it on error to stop the paired sendLoop. Previously a reconnect left the old sendLoop draining sendCh, breaking ordering. 4. Transparent fallback: stream helpers and doRename fall back to unary RPCs on transport errors (ErrStreamTransport), including the first Unimplemented from ensureStream. Previously the first call failed instead of degrading. 5. Filer rotation in openStream: try all filer addresses on dial failure, matching WithFilerClient behavior. Stop early on Unimplemented. 6. Pass metadata-bearing context to StreamMutateEntry RPC call so sw-client-id header is actually sent. 7. Gate lookupEntry local-cache fallback on open dirty handle or pending async flush to avoid resurrecting deleted/renamed entries. 8. Remove dead code in flushFileMetadata (err=nil followed by if err!=nil). 9. Use string matching for rename error-to-errno mapping in the mount to stay portable across Linux/macOS (numeric errno values differ). * mount: make failAllPending idempotent with delete-before-close Change failAllPending to collect pending entries into a local slice (deleting from the sync.Map first) before closing channels. This prevents double-close panics if called concurrently. Also remove the unused err parameter. * mount: add stream generation tracking and teardownStream Introduce a generation counter on streamMutateMux that increments each time a new stream is created. Requests carry the generation they were enqueued for so sendLoop can reject stale requests after reconnect. Add teardownStream(gen) which is idempotent (only acts when gen matches current generation and stream is non-nil). Both sendLoop and recvLoop call it on error, replacing the inline cleanup in recvLoop. sendLoop now actively triggers teardown on send errors instead of silently exiting. ensureStream waits for the prior generation's recvDone before creating a new stream, ensuring all old pending waiters are failed before reconnect. recvLoop now takes the stream, generation, and recvDone channel as parameters to avoid accessing shared fields without the lock. * mount: harden Close to prevent races with teardownStream Nil out stream, cancel, and grpcConn under the lock so that any concurrent teardownStream call from recvLoop/sendLoop becomes a no-op. Call failAllPending before closing sendCh to unblock waiters promptly. Guard recvDone with a nil check for the case where Close is called before any stream was ever opened. * mount: make errCh receive ctx-aware in doUnary and Rename Replace the blocking <-sendReq.errCh with a select that also observes ctx.Done(). If sendLoop exits via stopSend without consuming a buffered request, the caller now returns ctx.Err() instead of blocking forever. The buffered errCh (capacity 1) ensures late acknowledgements from sendLoop don't block the sender. * mount: fix sendLoop/Close race and recvLoop/teardown pending channel race Three related fixes: 1. Stop closing sendCh in Close(). Closing the shared producer channel races with callers who passed ensureStream() but haven't sent yet, causing send-on-closed-channel panics. sendCh is now left open; ensureStream checks m.closed to reject new callers. 2. Drain buffered sendCh items on shutdown. sendLoop defers drainSendCh() on exit so buffered requests get an ErrStreamTransport on their errCh instead of blocking forever. Close() drains again for any stragglers enqueued between sendLoop's drain and the final shutdown. 3. Move failAllPending from teardownStream into recvLoop's defer. teardownStream (called from sendLoop on send error) was closing pending response channels while recvLoop could be between pending.Load and the channel send — a send-on-closed-channel panic. recvLoop is now the sole closer of pending channels, eliminating the race. Close() waits on recvDone (with cancel() to guarantee Recv unblocks) so pending cleanup always completes. * filer/mount: add debug logging for hardlink lifecycle Add V(0) logging at every point where a HardLinkId is created, stored, read, or deleted to trace orphaned hardlink references. Logging covers: - gRPC server: CreateEntry/UpdateEntry when request carries HardLinkId - FilerStoreWrapper: InsertEntry/UpdateEntry when entry has HardLinkId - handleUpdateToHardLinks: entry path, HardLinkId, counter, chunk count - setHardLink: KvPut with blob size - maybeReadHardLink: V(1) on read attempt and successful decode - DeleteHardLink: counter decrement/deletion events - Mount Link(): when NewHardLinkId is generated and link is created This helps diagnose how a git pack .rev file ended up with a HardLinkId during a clone (no hard links should be involved). * test: add git clone/pull integration test for FUSE mount Shell script that exercises git operations on a SeaweedFS mount: 1. Creates a bare repo on the mount 2. Clones locally, makes 3 commits, pushes to mount 3. Clones from mount bare repo into an on-mount working dir 4. Verifies clone integrity (files, content, commit hashes) 5. Pushes 2 more commits with renames and deletes 6. Checks out an older revision on the mount clone 7. Returns to branch and pulls with real changes 8. Verifies file content, renames, deletes after pull 9. Checks git log integrity and clean status 27 assertions covering file existence, content, commit hashes, file counts, renames, deletes, and git status. Run against any existing mount: bash test-git-on-mount.sh /path/to/mount * test: add git clone/pull FUSE integration test to CI suite Add TestGitOperations to the existing fuse_integration test framework. The test exercises git's full file operation surface on the mount: 1. Creates a bare repo on the mount (acts as remote) 2. Clones locally, makes 3 commits (files, bulk data, renames), pushes 3. Clones from mount bare repo into an on-mount working dir 4. Verifies clone integrity (content, commit hash, file count) 5. Pushes 2 more commits with new files, renames, and deletes 6. Checks out an older revision on the mount clone 7. Returns to branch and pulls with real fast-forward changes 8. Verifies post-pull state: content, renames, deletes, file counts 9. Checks git log integrity (5 commits) and clean status Runs automatically in the existing fuse-integration.yml CI workflow. * mount: fix permission check with uid/gid mapping The permission checks in createRegularFile() and Access() compared the caller's local uid/gid against the entry's filer-side uid/gid without applying the uid/gid mapper. With -map.uid 501:0, a directory created as uid 0 on the filer would not match the local caller uid 501, causing hasAccess() to fall through to "other" permission bits and reject write access (0755 → other has r-x, no w). Fix: map entry uid/gid from filer-space to local-space before the hasAccess() call so both sides are in the same namespace. This fixes rsync -a failing with "Permission denied" on mkstempat when using uid/gid mapping. * mount: fix Mkdir/Symlink returning filer-side uid/gid to kernel Mkdir and Symlink used `defer wfs.mapPbIdFromFilerToLocal(entry)` to restore local uid/gid, but `outputPbEntry` writes the kernel response before the function returns — so the kernel received filer-side uid/gid (e.g., 0:0). macFUSE then caches these and rejects subsequent child operations (mkdir, create) because the caller uid (501) doesn't match the directory owner (0), and "other" bits (0755 → r-x) lack write permission. Fix: replace the defer with an explicit call to mapPbIdFromFilerToLocal before outputPbEntry, so the kernel gets local uid/gid. Also add nil guards for UidGidMapper in Access and createRegularFile to prevent panics in tests that don't configure a mapper. This fixes rsync -a "Permission denied" on mkpathat for nested directories when using uid/gid mapping. * mount: fix Link outputting filer-side uid/gid to kernel, add nil guards Link had the same defer-before-outputPbEntry bug as Mkdir and Symlink: the kernel received filer-side uid/gid because the defer hadn't run yet when outputPbEntry wrote the response. Also add nil guards for UidGidMapper in Access and createRegularFile so tests without a mapper don't panic. Audit of all outputPbEntry/outputFilerEntry call sites: - Mkdir: fixed in prior commit (explicit map before output) - Symlink: fixed in prior commit (explicit map before output) - Link: fixed here (explicit map before output) - Create (existing file): entry from maybeLoadEntry (already mapped) - Create (deferred): entry has local uid/gid (never mapped to filer) - Create (non-deferred): createRegularFile defer runs before return - Mknod: createRegularFile defer runs before return - Lookup: entry from lookupEntry (already mapped) - GetAttr: entry from maybeReadEntry/maybeLoadEntry (already mapped) - readdir: entry from cache (mapIdFromFilerToLocal) or filer (mapped) - saveEntry: no kernel output - flushMetadataToFiler: no kernel output - flushFileMetadata: no kernel output * test: fix git test for same-filesystem FUSE clone When both the bare repo and working clone live on the same FUSE mount, git's local transport uses hardlinks and cross-repo stat calls that fail on FUSE. Fix: - Use --no-local on clone to disable local transport optimizations - Use reset --hard instead of checkout to stay on branch - Use fetch + reset --hard origin/<branch> instead of git pull to avoid local transport stat failures during fetch * adjust logging * test: use plain git clone/pull to exercise real FUSE behavior Remove --no-local and fetch+reset workarounds. The test should use the same git commands users run (clone, reset --hard, pull) so it reveals real FUSE issues rather than hiding them. * test: enable V(1) logging for filer/mount and collect logs on failure - Run filer and mount with -v=1 so hardlink lifecycle logs (V(0): create/delete/insert, V(1): read attempts) are captured - On test failure, automatically dump last 16KB of all process logs (master, volume, filer, mount) to test output - Copy process logs to /tmp/seaweedfs-fuse-logs/ for CI artifact upload - Update CI workflow to upload SeaweedFS process logs alongside test output * mount: clone entry for filer flush to prevent uid/gid race flushMetadataToFiler and flushFileMetadata used entry.GetEntry() which returns the file handle's live proto entry pointer, then mutated it in-place via mapPbIdFromLocalToFiler. During the gRPC call window, a concurrent Lookup (which takes entryLock.RLock but NOT fhLockTable) could observe filer-side uid/gid (e.g., 0:0) on the file handle entry and return it to the kernel. The kernel caches these attributes, so subsequent opens by the local user (uid 501) fail with EACCES. Fix: proto.Clone the entry before mapping uid/gid for the filer request. The file handle's live entry is never mutated, so concurrent Lookup always sees local uid/gid. This fixes the intermittent "Permission denied" on .git/FETCH_HEAD after the first git pull on a mount with uid/gid mapping. * mount: add debug logging for stale lock file investigation Add V(0) logging to trace the HEAD.lock recreation issue: - Create: log when O_EXCL fails (file already exists) with uid/gid/mode - completeAsyncFlush: log resolved path, saved path, dirtyMetadata, isDeleted at entry to trace whether async flush fires after rename - flushMetadataToFiler: log the dir/name/fullpath being flushed This will show whether the async flush is recreating the lock file after git renames HEAD.lock → HEAD. * mount: prevent async flush from recreating renamed .lock files When git renames HEAD.lock → HEAD, the async flush from the prior close() can run AFTER the rename and re-insert HEAD.lock into the meta cache via its CreateEntryRequest response event. The next git pull then sees HEAD.lock and fails with "File exists". Fix: add isRenamed flag on FileHandle, set by Rename before waiting for the pending async flush. The async flush checks this flag and skips the metadata flush for renamed files (same pattern as isDeleted for unlinked files). The data pages still flush normally. The Rename handler flushes deferred metadata synchronously (Case 1) before setting isRenamed, ensuring the entry exists on the filer for the rename to proceed. For already-released handles (Case 2), the entry was created by a prior flush. * mount: also mark renamed inodes via entry.Attributes.Inode fallback When GetInode fails (Forget already removed the inode mapping), the Rename handler couldn't find the pending async flush to set isRenamed. The async flush then recreated the .lock file on the filer. Fix: fall back to oldEntry.Attributes.Inode to find the pending async flush when the inode-to-path mapping is gone. Also extract MarkInodeRenamed into a method on FileHandleToInode for clarity. * mount: skip async metadata flush when saved path no longer maps to inode The isRenamed flag approach failed for refs/remotes/origin/HEAD.lock because neither GetInode nor oldEntry.Attributes.Inode could find the inode (Forget already evicted the mapping, and the entry's stored inode was 0). Add a direct check in completeAsyncFlush: before flushing metadata, verify that the saved path still maps to this inode in the inode-to-path table. If the path was renamed or removed (inode mismatch or not found), skip the metadata flush to avoid recreating a stale entry. This catches all rename cases regardless of whether the Rename handler could set the isRenamed flag. * mount: wait for pending async flush in Unlink before filer delete Unlink was deleting the filer entry first, then marking the draining async-flush handle as deleted. The async flush worker could race between these two operations and recreate the just-unlinked entry on the filer. This caused git's .lock files (e.g. refs/remotes/origin/HEAD.lock) to persist after git pull, breaking subsequent git operations. Move the isDeleted marking and add waitForPendingAsyncFlush() before the filer delete so any in-flight flush completes first. Even if the worker raced past the isDeleted check, the wait ensures it finishes before the filer delete cleans up any recreated entry. * mount: reduce async flush and metadata flush log verbosity Raise completeAsyncFlush entry log, saved-path-mismatch skip log, and flushMetadataToFiler entry log from V(0) to V(3)/V(4). These fire for every file close with writebackCache and are too noisy for normal use. * filer: reduce hardlink debug log verbosity from V(0) to V(4) HardLinkId logs in filerstore_wrapper, filerstore_hardlink, and filer_grpc_server fire on every hardlinked file operation (git pack files use hardlinks extensively) and produce excessive noise. * mount/filer: reduce noisy V(0) logs for link, rmdir, and empty folder check - weedfs_link.go: hardlink creation logs V(0) → V(4) - weedfs_dir_mkrm.go: non-empty folder rmdir error V(0) → V(1) - empty_folder_cleaner.go: "not empty" check log V(0) → V(4) * filer: handle missing hardlink KV as expected, not error A "kv: not found" on hardlink read is normal when the link blob was already cleaned up but a stale entry still references it. Log at V(1) for not-found; keep Error level for actual KV failures. * test: add waitForDir before git pull in FUSE git operations test After git reset --hard, the FUSE mount's metadata cache may need a moment to settle on slow CI. The git pull subprocess (unpack-objects) could fail to stat the working directory. Poll for up to 5s. * Update git_operations_test.go * wait * test: simplify FUSE test framework to use weed mini Replace the 4-process setup (master + volume + filer + mount) with 2 processes: "weed mini" (all-in-one) + "weed mount". This simplifies startup, reduces port allocation, and is faster on CI. * test: fix mini flag -admin → -admin.ui	2026-03-25 20:06:34 -07:00