* volume: forward fsync=true to replicas in ReplicatedWrite
When a write request carries fsync=true, only the primary volume server
flushed to disk: the replica fan-out URL in ReplicatedWrite only carried
type/ttl/ts/cm, so replicas always wrote without fsync even when the
client explicitly requested a durable write.
Forward the fsync request parameter to the replica volume servers so a
durable write means every replica has flushed to disk, not just the
primary. Replicas without fsync are untouched (zero behavior change).
* storage: flush a durable write inline while stopping
The fsync flag on the write path really selects the async batch worker,
and it was switched off once the store is stopping. So a fsync=true write
landing during the pre-stop drain got acked without ever being flushed -
and now that ReplicatedWrite forwards fsync, that covers replicas too.
Flush it inline instead of queueing it. The drain keeps accepting writes,
which is the whole point of preStopSeconds, and the ack still means the
.dat is on disk. If the fsync fails, the append comes back off the .dat
and the needle map goes back to what it pointed at before, so nothing
resolves to an offset past the truncated end.
* storage: make the store's stopping flag atomic
SetStopping runs on the signal handler goroutine while the write and
vacuum paths read the flag, so every read of it was racy. Nothing about
the shutdown ordering changes; only the flag itself is now safe to read.
* topology: check the errors the replication test was dropping
The mock replica ignored its response write and the mock master ignored
whatever Serve returned, so a broken mock would have shown up as a
confusing timeout rather than a failure. Also drops the explicit listener
close: grpc.Server.Stop already closes the listener it was given.
---------
Co-authored-by: hzsunchao <hzsunchao@corp.netease.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
* Give volume.merge the needle size the target actually indexes by
needleBlobFromNeedle returned the size Append reports, which is
Size(n.DataSize) - payload bytes only. The .dat header, the needle map and
WriteNeedleBlobRequest.Size all use n.Size, which additionally covers the
flags, name, mime and lastModified fields.
Every needle volume.merge copied therefore landed with a too-small size. The
target indexed it at that length, so every later read failed the header check
in ReadBytes with a size mismatch, and on v3 the fresh AppendAtNs stamp landed
NeedleHeaderSize+DataSize+NeedleChecksumSize into the blob - exactly on the
flags byte - overwriting flags, name size, mime size and the first mime bytes
with the top of a timestamp. Needles came back with flags 0x18, no name, no
mime and a phantom TTL parsed from two arbitrary timestamp bytes; the ones
that decoded as expired 404 and vacuum would drop them. Since merge rebuilds
every replica from the merged copy, no clean replica survives.
Return n.Size, which Append fills in as it serializes, matching what the
normal write path stores via nm.Put.
* Reject needle blobs whose size disagrees with their own header
WriteNeedleBlob trusts the caller's size for two destructive things: it is
what goes into the needle map, and it is where the v3 AppendAtNs stamp is
written inside the caller's buffer. A caller passing the payload-only DataSize
convention corrupts both, and nothing surfaces until the needle is read back -
by which point every replica may already have been rebuilt from it.
Parse the blob's own header and refuse the write when the two disagree.
Mirrored in the Rust volume server.
* volume: reject needle blob writes to read-only volumes
WriteNeedleBlob appends the blob to .dat and only then calls nm.Put. On a
read-only volume the needle map is a SortedFileNeedleMap whose Put always
fails, so the append is never indexed and never rolled back.
Nothing upstream stops this: volume.check.disk picks its targets from the
master's cached topology, which goes stale the moment a volume server marks
a replica read-only itself — a failed data integrity check at load, or an
EIO quarantine. Each sync attempt then grows the .dat of a replica that is
supposed to be frozen by one unindexed needle, and reports it as "invalid
argument", the bare os.ErrInvalid the needle map returns.
Check IsReadOnly before touching .dat, same as the upload path does.
* volume: say which needle and volume failed to index
An index write that fails surfaced as a bare errno with no volume, no needle
and no file — "invalid argument" for a read-only needle map, or a plain
ENOSPC when .idx lives on its own filesystem via -dir.idx. Both were logged
at V(4), so by default the operator saw only the errno the client got back.
* fix(volume): don't fatal on missing .idx for remote-tiered volume
A .vif left behind without its .idx (orphaned by a crashed move, partial
copy, or hand-edit) would trip glog.Fatalf in checkIdxFile and take the
whole volume server down on boot, killing every healthy volume on it
too. For remote-tiered volumes treat it as a per-volume load error so
the server can come up and the operator can clean up the stray .vif.
Refs #9331.
* fix(balance): skip remote-tiered volumes in admin balance detection
The admin/worker balance detector had no equivalent of the shell-side
guard ("does not move volume in remote storage" in
command_volume_balance.go), so it scheduled moves on remote-tiered
volumes. The "move" copies .idx/.vif to the destination and then calls
Volume.Destroy on the source, which calls backendStorage.DeleteFile —
deleting the remote object the destination's new .vif now points at.
Populate HasRemoteCopy on the metrics emitted by both the admin
maintenance scanner and the worker's master poll, then drop those
volumes at the top of Detection.
Fixes#9331.
* Apply suggestion from @gemini-code-assist[bot]
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* fix(volume): keep remote data on volume-move-driven delete
The on-source delete after a volume move (admin/worker balance and
shell volume.move) ran Volume.Destroy with no way to opt out of the
remote-object cleanup. Volume.Destroy unconditionally calls
backendStorage.DeleteFile for remote-tiered volumes, so a successful
move would copy .idx/.vif to the destination and then nuke the cloud
object the destination's new .vif was already pointing at.
Add VolumeDeleteRequest.keep_remote_data and plumb it through
Store.DeleteVolume / DiskLocation.DeleteVolume / Volume.Destroy. The
balance task and shell volume.move set it to true; the post-tier-upload
cleanup of other replicas and the over-replication trim in
volume.fix.replication also set it to true since the remote object is
still referenced. Other real-delete callers keep the default. The
delete-before-receive path in VolumeCopy also sets it: the inbound copy
carries a .vif that may reference the same cloud object as the
existing volume.
Refs #9331.
* test(storage): in-process remote-tier integration tests
Cover the four operations the user is most likely to run against a
cloud-tiered volume — balance/move, vacuum, EC encode, EC decode — by
registering a local-disk-backed BackendStorage as the "remote" tier and
exercising the real Volume / DiskLocation / EC encoder code paths.
Locks in:
- Destroy(keepRemoteData=true) preserves the remote object (move case)
- Destroy(keepRemoteData=false) deletes it (real-delete case)
- Vacuum/compact on a remote-tier volume never deletes the remote object
- EC encode requires the local .dat (callers must download first)
- EC encode + rebuild round-trips after a tier-down
Tests run in-process and finish in under a second total — no cluster,
binary, or external storage required.
* fix(rust-volume): keep remote data on volume-move-driven delete
Mirror the Go fix in seaweed-volume: plumb keep_remote_data through
grpc volume_delete → Store.delete_volume → DiskLocation.delete_volume
→ Volume.destroy, and skip the s3-tier delete_file call when the flag
is set. The pre-receive cleanup in volume_copy passes true for the
same reason as the Go side: the inbound copy carries a .vif that may
reference the same cloud object as the existing volume.
The Rust loader already warns rather than fataling on a stray .vif
without an .idx (volume.rs load_index_inmemory / load_index_redb), so
no counterpart to the Go fatal-on-missing-idx fix is needed.
Refs #9331.
* fix(volume): preserve remote tier on IO-error eviction; fix EC test target
Two review nits:
- Store.MaybeAddVolumes' periodic cleanup pass deleted IO-errored
volumes with keepRemoteData=false, so a transient local fault on a
remote-tiered volume would also nuke the cloud object. Track the
delete reason via a parallel slice and pass keepRemoteData=v.HasRemoteFile()
for IO-error evictions; TTL-expired evictions still pass false.
- TestRemoteTier_ECEncodeDecode_AfterDownload deleted shards 0..3 but
called them "parity" — by the klauspost/reedsolomon convention shards
0..DataShardsCount-1 are data and DataShardsCount..TotalShardsCount-1
are parity. Switch the loop to delete the parity range so the
intent matches the indices.
---------
Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com>
* fix: close volumes and EC shards in tests to prevent Windows cleanup failures
On Windows, t.TempDir() cleanup fails when test files are still open
because Windows enforces mandatory file locking. Add defer v.Close(),
defer store.Close(), and EC volume cleanup to ensure all file handles
are released before temp directory removal.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
* refactor: extract closeEcVolumes helper to reduce duplication
Address code review feedback by extracting the repeated EC volume
cleanup loop into a closeEcVolumes() helper function.
Co-Authored-By: Claude Opus 4.5 <noreply@anthropic.com>
---------
Co-authored-by: Claude Opus 4.5 <noreply@anthropic.com>
* types packages is imported more than onece
* lazy-loading
* fix bugs
* fix bugs
* fix unit tests
* fix test error
* rename function
* unload ldb after initial startup
* Don't load ldb when starting volume server if ldbtimeout is set.
* remove uncessary unloadldb
* Update weed/command/server.go
Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>
* Update weed/command/volume.go
Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>
Co-authored-by: guol-fnst <goul-fnst@fujitsu.com>
Co-authored-by: Chris Lu <chrislusf@users.noreply.github.com>
The io/ioutil package has been deprecated as of Go 1.16, see
https://golang.org/doc/go1.16#ioutil. This commit replaces the existing
io/ioutil functions with their new definitions in io and os packages.
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
