* master: let VolumeList ask for the volumes it wants
The request carried nothing, so every caller was answered with the whole
cluster. A dashboard opening one volume's page, or a capacity probe adding up
one bucket, was served all 800k of them and threw away the rest -- and the
master built every one of those messages first.
The topology, its disks and their counters are still reported in full: a caller
reading free space or replica placement needs the cluster whichever volumes it
asked about. Only what is listed under a disk is selected, ec shards included.
An empty collection and a zero volume id take everything, the way volume.list
already reads its own -collectionPattern and -volumeId, so a caller that
forgets to narrow is answered too much rather than answered wrongly. That
leaves the default collection unnameable, since it is the one the empty string
names, so it gets a field of its own.
An older client sends none of it and is answered exactly as before.
* admin: ask the master for the volume the page is showing
A volume's detail page was pulling every volume in the cluster to find one and
its replicas, and discarding the rest.
* admin: ask the master for the ec volume the page is showing
Same as the volume detail page: one volume's shards were found by pulling every
ec shard in the cluster.
* s3: ask the master for the bucket's own collection
The SOSAPI capacity probe summed one collection's volumes out of a listing of
every volume in the cluster. Cluster capacity still comes out the same: it is
read from the disk counters, which a filtered listing reports in full.
* topology: read the disk usage counters atomically
They are written with atomic.AddInt64 from heartbeats but were read plainly by
the two listings and by FreeSpace, and the map they sit in was iterated without
the lock its neighbour takes. Under -race a listing concurrent with a heartbeat
trips on both.
Ping previously dialled whatever host:port the caller asked for. Gate
each server's Ping handler on cluster membership: masters check the
topology, registered cluster nodes, and configured master peers; volume
servers only accept their seed/current masters; filers accept tracked
peer filers, the master-learned volume server set, and configured
masters.
Use address-indexed peer lookups to keep Ping target validation O(1):
- topology maintains a pb.ServerAddress -> *DataNode index alongside
the dc/rack/node tree, kept in sync from doLinkChildNode and
UnlinkChildNode plus the ip/port-rewrite branch in
GetOrCreateDataNode. GetTopology now returns nil on a detached
subtree instead of panicking, so the linkage hooks can no-op safely.
- vid_map tracks a refcount per volume-server address so
hasVolumeServer answers without scanning every vid location. The
add path skips empty-address entries the same way the delete path
already does, so a zero-value Location cannot leak a permanent
serverRefCount[""] bucket.
- masters reuse a cached master-address set from MasterClient instead
of walking the configured peer slice on every request.
- volume servers compare against a pre-built seed-master set and
protect currentMaster reads/writes with an RWMutex, fixing the
data race with the heartbeat goroutine. The seed slice is copied
on construction so external mutation cannot desync it from the
frozen lookup set.
- cluster.check drops the direct volume-to-volume sweep; volume
servers no longer carry a peer-volume list, and the note next to
the dropped probe is reworded to make clear that direct
volume-to-volume reachability is intentionally not validated by
this command.
Update the volume-server integration tests that drove Ping through the
new admission gate: success-path coverage now targets the master peer
(the only type a volume server tracks), and the unknown/unreachable
path asserts the InvalidArgument the gate now returns instead of the
old downstream dial error.
Mirror the same admission gate in the Rust volume server crate: a
seed-master HashSet built once at startup plus a tokio RwLock over the
heartbeat-tracked current master, both consulted in is_known_ping_target
on every Ping, with InvalidArgument returned for any target that isn't
a recognised master.
* pb: add id field to Heartbeat message for stable volume server identification
This adds an 'id' field to the Heartbeat protobuf message that allows
volume servers to identify themselves independently of their IP:port address.
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* storage: add Id field to Store struct
Add Id field to Store struct and include it in CollectHeartbeat().
The Id field provides a stable volume server identity independent of IP:port.
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* topology: support id-based DataNode identification
Update GetOrCreateDataNode to accept an id parameter for stable node
identification. When id is provided, the DataNode can maintain its identity
even when its IP address changes (e.g., in Kubernetes pod reschedules).
For backward compatibility:
- If id is provided, use it as the node ID
- If id is empty, fall back to ip:port
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* volume: add -id flag for stable volume server identity
Add -id command line flag to volume server that allows specifying a stable
identifier independent of the IP address. This is useful for Kubernetes
deployments with hostPath volumes where pods can be rescheduled to different
nodes while the persisted data remains on the original node.
Usage: weed volume -id=node-1 -ip=10.0.0.1 ...
If -id is not specified, it defaults to ip:port for backward compatibility.
Fixes https://github.com/seaweedfs/seaweedfs/issues/7487
* server: add -volume.id flag to weed server command
Support the -volume.id flag in the all-in-one 'weed server' command,
consistent with the standalone 'weed volume' command.
Usage: weed server -volume.id=node-1 ...
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* topology: add test for id-based DataNode identification
Test the key scenarios:
1. Create DataNode with explicit id
2. Same id with different IP returns same DataNode (K8s reschedule)
3. IP/PublicUrl are updated when node reconnects with new address
4. Different id creates new DataNode
5. Empty id falls back to ip:port (backward compatibility)
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* pb: add address field to DataNodeInfo for proper node addressing
Previously, DataNodeInfo.Id was used as the node address, which worked
when Id was always ip:port. Now that Id can be an explicit string,
we need a separate Address field for connection purposes.
Changes:
- Add 'address' field to DataNodeInfo protobuf message
- Update ToDataNodeInfo() to populate the address field
- Update NewServerAddressFromDataNode() to use Address (with Id fallback)
- Fix LookupEcVolume to use dn.Url() instead of dn.Id()
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* fix: trim whitespace from volume server id and fix test
- Trim whitespace from -id flag to treat ' ' as empty
- Fix store_load_balancing_test.go to include id parameter in NewStore call
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* refactor: extract GetVolumeServerId to util package
Move the volume server ID determination logic to a shared utility function
to avoid code duplication between volume.go and rack.go.
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* fix: improve transition logic for legacy nodes
- Use exact ip:port match instead of net.SplitHostPort heuristic
- Update GrpcPort and PublicUrl during transition for consistency
- Remove unused net import
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
* fix: add id normalization and address change logging
- Normalize id parameter at function boundary (trim whitespace)
- Log when DataNode IP:Port changes (helps debug K8s pod rescheduling)
Ref: https://github.com/seaweedfs/seaweedfs/issues/7487
Chris Lu