* util, pb: classify a filer error by the status the server sent
DoSeaweedListWithSnapshot wrapped a failed ListEntries with %v, dropping the
gRPC status, so IsTransientError fell back to matching substrings against a
message that now held the caller's path. Keep the status with %w and let it
decide, reading the server's own text rather than the wrapper's.
Claude-Session: https://claude.ai/code/session_01BjDWtZsCoZY6x4pdDmGWxU
* s3: keep the bucket and prefix out of the list retry decision
A bucket named transport, or a prefix under logs/unavailable/, made a
PermissionDenied listing look transient and got it retried; a key holding the
not-found sentence suppressed a retry that should have run. Both checks now
read the filer's status, and only fall back to the text when there is none.
Claude-Session: https://claude.ai/code/session_01BjDWtZsCoZY6x4pdDmGWxU
* filer, s3: classify a delete failure before the path is wrapped into it
The filer put the non-empty-folder marker behind its own "delete directory %s"
wrapper and the gateway matched it as a substring, so a key named after the
marker turned a real delete failure into the demote-the-marker no-op and the
request answered 204. Keep the marker leading the message that crosses the
wire, turn it back into a sentinel where the response is read, and match that.
Claude-Session: https://claude.ai/code/session_01BjDWtZsCoZY6x4pdDmGWxU
* util: match transient error messages case-insensitively, expose the message form
The same condition reaches different layers capitalized differently -- a
volume server relays its idle timeout as "I/O timeout" inside a JSON string --
and the callers that grew their own substring lists all lower-case first.
Also split out IsTransientErrorMessage for the paths that carry only the text,
such as the per-file status strings in a batch delete response, and pick up
"no route to host" and "network is unreachable" from the gRPC classifier.
* filersink: classify transient network errors through util.IsTransientError
The local list caught i/o timeout, connection reset, and broken pipe but not
connection refused, no such host, unexpected EOF, the syscall errnos, or the
gRPC and S3 overload codes. Keep only the bare io.EOF case, which is transient
here -- a truncated chunk read -- but a clean stream end elsewhere.
* filer deletion: reuse util.IsTransientErrorMessage for the network patterns
Six of the sixteen patterns were already covered. Keep the ones specific to
this pipeline -- read-only volumes, lookup failures, backpressure -- and note
why context cancellation stays retryable here: it decides whether to requeue
the deletion, not whether to retry a call.
* wdclient: fold the shared classifier into the volume lookup retry check
The string tail duplicated the shared list and missed the syscall errnos and
net.Error timeouts. Keep "connection" and "timeout", which are broader than
the shared classifier on purpose: a volume lookup is a cheap read-only call.
* util: retry transient errors, not just the ones containing "transport"
util.Retry only retried when the error string contained "transport", so a
plain "read: connection reset by peer" from S3 got zero retries. Classify
the error instead: net timeouts, connection resets, and the throttling and
overload replies S3 and gRPC return are all worth another attempt, while a
cancelled or expired context is not.
* filer sync: hold the sync offset behind a failed event
A sync job that returned an error was logged and forgotten, and the
watermark advanced past it anyway. The offset is the durable resume point,
so the event was never replayed: for filer.remote.sync that left the file
present locally, absent on the remote, with no RemoteEntry and nothing to
retry it.
Pin the watermark at the oldest failed event. Later events keep flowing,
but the persisted offset stays behind the failure, so a restart replays it.
With replication 001 and one node down, ~2/3 of volumes have their
replica on the dead node. The primary write lands locally but the
replica forward fails, so the volume returns 500 "failed to write to
replicas". #9744 made that upload fail fast so the client re-assigns,
but the client retry never fired: the reassign gate matched a fixed
list of error substrings that didn't include this one. The mount
surfaced I/O error and dropped the chunk, leaving missing lines and
null-byte gaps in an append workload while a node rebooted.
Decide reassignment by HTTP status instead of matching message text.
On the write path a volume server only 5xxs on a ReplicatedWrite
failure (local disk, replica peer down, under-replication) — all of
which a different volume dodges — so any 5xx reassigns; a no-response
transport failure (the assigned target itself is down) reassigns too;
a 4xx is a genuine client error and is surfaced. doUploadData tags its
errors with the response status via uploadStatusError, and the gate
moves from util.MultiRetry(errList) to util.RetryOnError(predicate).
This drops the fragile substring list (and the message-prefix
constants and guard test it needed); store_replicate.go is untouched.
* master: return 503/Unavailable during topology warmup after leader change
After a master restart or leader change, the topology is empty until
volume servers reconnect and send heartbeats. During this warmup window
(3 heartbeat intervals = 15 seconds), volume lookups that fail now
return 503 Service Unavailable (HTTP) or gRPC Unavailable instead of
404 Not Found, signaling clients to retry with other masters.
* master: skip warmup 503 on fresh start and single-master setups
- Check MaxVolumeId > 0 to distinguish restart from fresh start
(MaxVolumeId is Raft-persisted, so 0 means no prior data)
- Check peer count > 1 so single-master deployments aren't affected
(no point suggesting "retry with other masters" if there are none)
* master: address review feedback and block assigns during warmup
- Protect LastLeaderChangeTime with dedicated mutex (fix data race)
- Extract warmup multiplier as WarmupPulseMultiplier constant
- Derive Retry-After header from pulse config instead of hardcoding
- Only trigger warmup 503 for "not found" errors, not parse errors
- Return nil response (not partial) on gRPC Unavailable
- Add doc comments to IsWarmingUp, getter/setter, WarmupDuration
- Block volume assign requests (HTTP and gRPC) during warmup,
since the topology is incomplete and assignments would be unreliable
- Skip warmup behavior for single-master setups (no peers to retry)
* master: apply warmup to all setups, skip only on fresh start
Single-master restarts still have an empty topology until heartbeats
arrive, so warmup protection should apply there too. The only case
to skip is a fresh cluster start (MaxVolumeId == 0), which already
has no volumes to look up.
- Remove GetMasterCount() > 1 guard from all warmup checks
- Remove now-unused GetMasterCount helper
- Update error messages to "topology is still loading" (not
"retry with other masters" which doesn't apply to single-master)
* master: add client-side retry on Unavailable for lookup and assign
The server-side 503/Unavailable during warmup needs client cooperation.
Previously, LookupVolumeIds and Assign would immediately propagate the
error without retry.
Now both paths retry with exponential backoff (1s -> 1.5s -> ... up to
6s) when receiving Unavailable, respecting context cancellation. This
covers the warmup window where the master's topology is still loading
after a restart or leader change.
* master: seed warmup timestamp in legacy raft path at setup
The legacy raft path only set lastLeaderChangeTime inside the event
listener callback, which could fire after IsLeader() was already
observed as true in SetRaftServer. Seed the timestamp at setup time
(matching the hashicorp path) so IsWarmingUp() is active immediately.
* master: fix assign retry loop to cover full warmup window
The retry loop used waitTime <= maxWaitTime as a stop condition,
causing it to give up after ~13s while warmup lasts 15s. Now cap
each individual sleep at maxWaitTime but keep retrying until the
context is cancelled.
* master: preserve gRPC status in lookup retry and fix retry window
Return the raw gRPC error instead of wrapping with fmt.Errorf so
status.FromError() can extract the status code. Use proper gRPC
status check (codes.Unavailable) instead of string matching. Also
cap individual sleep at maxWaitTime while retrying until ctx is done.
* master: use gRPC status code instead of string matching in assign retry
Use status.FromError/codes.Unavailable instead of brittle
strings.Contains for detecting retriable gRPC errors in the
assign retry loop.
* master: use remaining warmup duration for Retry-After header
Set Retry-After to the remaining warmup time instead of the full
warmup duration, so clients don't wait longer than necessary.
* master: reset ret.Replicas before populating from assign response
Clear Replicas slice before appending to prevent duplicate entries
when the assign response is retried or when alternative requests
are attempted.
* master: add unit tests for warmup retry behavior
Test that Assign() and LookupVolumeIds() retry on codes.Unavailable
and stop promptly when the context is cancelled.
* master: record leader change time before initialization work
Move SetLastLeaderChangeTime() to fire immediately when the leader
change event is received, before DoBarrier(), EnsureTopologyId(),
and updatePeers(), so the warmup clock starts at the true moment
of leadership transition.
* master: use topology warmup duration in volume growth wait loop
Replace hardcoded constants.VolumePulsePeriod * 2 with
topo.IsWarmingUp() and topo.WarmupDuration() so the growth wait
stays in sync with the configured warmup window. Remove unused
constants import.
* master: resolve master before creating RPC timeout context
Move GetMaster() call before context.WithTimeout() so master
resolution blocking doesn't consume the gRPC call timeout.
* master: use NotFound flag instead of string matching for volume lookup
Add a NotFound field to LookupResult and set it in findVolumeLocation
when a volume is genuinely missing. Update HTTP and gRPC warmup
checks to use this flag instead of strings.Contains on the error
message.
* master: bound assign retry loop to 30s for deadline-free contexts
Without a context deadline, the Unavailable retry loop could spin
forever. Add a maxRetryDuration of 30s so the loop gives up even
when no context deadline is set.
* master: strengthen assign retry cancellation test
Verify the retry loop actually retried (callCount > 1) and that
the returned error is context.DeadlineExceeded, not just any error.
* master: extract shared retry-with-backoff utility
Add util.RetryWithBackoff for context-aware, bounded retry with
exponential backoff. Refactor both Assign() and LookupVolumeIds()
to use it instead of duplicating the retry/sleep/backoff logic.
* master: cap waitTime in RetryWithBackoff to prevent unbounded growth
Cap the backoff waitTime at maxWaitTime so it doesn't grow
indefinitely in long-running retry scenarios.
* master: only return Unavailable during warmup when all lookups failed
For batched LookupVolume requests, return partial results when some
volumes are found. Only return codes.Unavailable when no volumes
were successfully resolved, so clients benefit from partial results
instead of retrying unnecessarily.
* master: set retriable error message in 503 response body
When returning 503 during warmup, replace the "not found" error
in the JSON body with "service warming up, please retry" so
clients don't treat it as a permanent error.
* master: guard empty master address in LookupVolumeIds
If GetMaster() returns empty (no master found or ctx cancelled),
return an appropriate error instead of dialing an empty address.
Returns ctx.Err() if context is done, otherwise codes.Unavailable
to trigger retry.
* master: add comprehensive tests for RetryWithBackoff
Test success after retries, non-retryable error handling, context
cancellation, and maxDuration cap with context.Background().
* master: enforce hard maxDuration bound in RetryWithBackoff
Use a deadline instead of elapsed-time check so the last sleep is
capped to remaining time. This prevents the total retry duration
from overshooting maxDuration by up to one full backoff interval.
* master: respect fresh-start bypass in RemainingWarmupDuration
Check IsWarmingUp() first (which returns false when MaxVolumeId==0)
so RemainingWarmupDuration returns 0 on fresh clusters.
* master: round up Retry-After seconds to avoid underestimating
Use math.Ceil so fractional remaining seconds (e.g. 1.9s) round
up to the next integer (2) instead of flooring down (1).
* master: tighten batch lookup warmup to all-NotFound only
Only return codes.Unavailable when every requested volume ID was
a transient not-found. Mixed cases with non-NotFound errors now
return the response with per-volume error details preserved.
* master: reduce retry log noise and fix timer leak
Lower per-attempt retry log from V(0) to V(1) to reduce noise
during warmup. Replace time.After with time.NewTimer to avoid
lingering timers when context is cancelled.
* master: add per-attempt timeout for assign RPC
Use a 10s per-attempt timeout so a single slow RPC can't consume
the entire 30s retry budget when ctx has no deadline.
* master: share single 30s retry deadline across assign request entries
The Assign() function iterates over primary and fallback requests,
previously giving each its own 30s RetryWithBackoff budget. With a
primary + fallback, the total could reach 60s. Compute one deadline
up front and pass the remaining budget to each RetryWithBackoff call
so the entire Assign() call stays within a single 30s cap.
* master: strengthen context-cancel test with DeadlineExceeded and retry assertions
Assert errors.Is(err, context.DeadlineExceeded) to verify the error
is specifically from the context deadline, and check callCount > 1
to prove retries actually occurred before cancellation. Mirrors the
pattern used in TestAssignStopsOnContextCancel.
* master: bound GetMaster with per-attempt timeout in LookupVolumeIds
GetMaster() calls WaitUntilConnected() which can block indefinitely
if no master is available. Previously it used the outer ctx, so a
slow master resolution could consume the entire RetryWithBackoff
budget in a single attempt. Move the per-attempt timeoutCtx creation
before the GetMaster call so both master resolution and the gRPC
LookupVolume RPC share one grpcTimeout-bounded attempt.
* master: use deadline-aware context for assign retry budget
The shared 30s deadline only limited RetryWithBackoff's internal
wall-clock tracking, but per-attempt contexts were still derived
from the original ctx and could run for up to 10s even when the
budget was nearly exhausted. Create a deadlineCtx from the computed
deadline and derive both RetryWithBackoff and per-attempt timeouts
from it so all operations honor the shared 30s cap.
* master: skip warmup gate for empty lookup requests
When VolumeOrFileIds is empty, notFoundCount == len(req.VolumeOrFileIds)
is 0 == 0 which is true, causing empty lookup batches during warmup to
return codes.Unavailable and be retried endlessly. Add a
len(req.VolumeOrFileIds) > 0 guard so empty requests pass through.
* master: validate request fields before warmup gate in Assign
Move Replication and Ttl parsing before the IsWarmingUp() check so
invalid inputs get a proper validation error instead of being masked
by codes.Unavailable during warmup. Pure syntactic validation does
not depend on topology state and should run first.
* master: check deadline and context before starting retry attempt
RetryWithBackoff only checked the deadline and context after an
attempt completed or during the sleep select. If the deadline
expired or context was canceled during sleep, the next iteration
would still call operation() before detecting it. Add pre-operation
checks so no new attempt starts after the budget is exhausted.
* master: always return ctx.Err() on context cancellation in RetryWithBackoff
When ctx.Err() is non-nil, the pre-operation check was returning
lastErr instead of ctx.Err(). This broke callers checking
errors.Is(err, context.DeadlineExceeded) and contradicted the
documented contract. Always return ctx.Err() so the cancellation
reason is properly surfaced.
* master: handle warmup errors in StreamAssign without killing the stream
StreamAssign was returning codes.Unavailable errors from Assign
directly, which terminates the gRPC stream and breaks pooled
connections. Instead, return transient errors as in-band error
responses so the stream survives warmup periods.
Also reset assignClient in doAssign on Send/Recv failures so a
broken stream doesn't leave the proxy permanently dead.
* master: wait for warmup before slot search in findAndGrow
findEmptySlotsForOneVolume was called before the warmup wait loop,
selecting slots from an incomplete topology. Move the warmup wait
before slot search so volume placement uses the fully warmed-up
topology with all servers registered.
* master: add Retry-After header to /dir/assign warmup response
The /dir/lookup handler already sets Retry-After during warmup but
/dir/assign did not, leaving HTTP clients without guidance on when
to retry. Add the same header using RemainingWarmupDuration().
* master: only seed warmup timestamp on leader at startup
SetLastLeaderChangeTime was called unconditionally for both leader
and follower nodes. Followers don't need warmup state, and the
leader change event listener handles real elections. Move the seed
into the IsLeader() block so only the startup leader gets warmup
initialized.
* master: preserve codes.Unavailable for StreamAssign warmup errors in doAssign
StreamAssign returns transient warmup errors as in-band
AssignResponse.Error messages. doAssign was converting these to plain
fmt.Errorf, losing the codes.Unavailable classification needed for
the caller's retry logic. Detect warmup error messages and wrap them
as status.Error(codes.Unavailable) so RetryWithBackoff can retry.
* Fix chown Input/output error on large file sets (Fixes#7911)
Implemented retry logic for MySQL/MariaDB backend to handle transient errors like deadlocks and timeouts.
* Fix syntax error: missing closing brace
* Refactor: Use %w for error wrapping and errors.As for extraction
* Fix: Disable retry logic inside transactions
Chris Lu