* shell: add volume.balance -byDiskUsage to balance by actual data
The default balancer ranks servers by slot density, dividing used volumes by
MaxVolumeCount. When MaxVolumeCount is configured higher than the disk can hold,
a physically near-full server looks nearly empty and gets picked as the move
target, so balancing drains less-full servers onto an already-full one.
-byDiskUsage ranks servers by the actual data they hold (sum of volume sizes)
instead, so the fullest-by-data server is treated as full and balancing drains
it. It assumes comparable disk sizes per disk type and still respects each
server's free volume slots. Default behavior is unchanged.
* plumb physical disk usage into topology, gate volume.balance on it
Volume servers now report each disk's filesystem total/free bytes in the
heartbeat, and the master stores them in DiskInfo. volume.balance uses them to
skip any move target whose disk is already near full (-maxDiskUsagePercent,
default 90), so an over-configured maxVolumeCount can no longer make a
physically full server look empty and get drained onto. The gate judges each
server against its own disk, so heterogeneous disk sizes are fine; servers that
do not report bytes fall back to slot-only behavior.
Rust seaweed-volume mirrors the heartbeat reporting.
* admin: report real physical disk capacity when volume servers provide it
The dashboard estimated server capacity as maxVolumeCount * volumeSizeLimit,
which overstates it when maxVolumeCount is set higher than the disk holds.
Prefer the filesystem capacity now reported per disk, falling back to the
estimate for servers that do not report it.
* worker: gate automatic balance on physical disk fullness too
The maintenance balance worker selects the least slot-utilized server as the
move destination, so an over-configured maxVolumeCount makes a physically full
server look empty and get drained onto — the same defect as the shell command.
Now that DiskInfo carries real disk bytes, skip any destination whose disk is
at/above 90% used (per server, against its own disk); a full server can still be
a source. When every candidate destination is full, create no tasks. Servers
that do not report disk bytes are not gated.
* balance: share the physical-disk-fullness gate between shell and worker
The shell volume.balance command and the maintenance balance worker each grew
their own copy of the disk-fullness gate (targetDiskTooFull / destinationDiskTooFull)
and a maxDiskUsagePercent=90 constant. Pull both into weed/topology/balancer
(DiskTooFullAfter + DefaultMaxDiskUsagePercent) so the policy has one home and the
two balancers can't drift.
* balance: harden the physical-disk gate
Guard against a nil DiskInfo in the byte/slot lookups. Let a zero disk-capacity
report clear previously stored bytes (0 means "not reported" for bytes, unlike
maxVolumeCount), so a server that stops reporting falls back to slot-only instead
of trusting stale capacity. In the worker, charge each planned move's bytes to
its destination within a detection cycle so the gate sees a target fill up rather
than only its heartbeat-time free space. Note the per-location capacity summing
assumes one location per filesystem (the used ratio the gate relies on stays
correct regardless; absolute capacity can over-report).
fetchPublicUrlMap() in weed/admin/dash/cluster_topology.go uses a
dedicated &http.Client{} that doesn't honor security.toml client TLS
configuration, and hardcodes "http://" in the URL. When master is
configured HTTPS-only ([https.master] set), every cluster topology
cache refresh logs:
NOTICE: http: TLS handshake error from <admin-ip>:<port>: client
sent an HTTP request to an HTTPS server
The function falls through to glog.V(1).Infof and returns nil, so the
admin UI loses PublicUrl enrichment for data nodes. Cosmetic but noisy.
Switch to util_http.GetGlobalHttpClient() whose Do() calls
NormalizeHttpScheme(), which automatically rewrites http:// to https://
when [https.client] is enabled and presents the configured client cert.
Preserve the 5-second timeout via context.WithTimeout().
Same pattern as weed/admin/handlers/file_browser_handlers.go,
weed/server/master_server.go, weed/shell/command_volume_fsck.go.
* fix(admin): list all masters and dedupe EC file counts in dashboard
Dashboard -> Master Nodes only ever showed the currently connected master
because getMasterNodesStatus hard-coded a single entry. Replace it with a
RaftListClusterServers call that returns every master in the raft group and
tags the real leader, falling back to the current master only if the raft
call fails.
Buckets -> Object Store Buckets could render 0 objects for a bucket backed
by an EC volume. Every shard holder reports the same whole-volume
file_count (read from the replicated .ecx), so the first-seen value wins;
if that first node had not yet finished loading .ecx it reported 0 and
pinned the aggregate at 0. Take the max across reporting nodes instead.
The dashboard header total_files also dropped after volumes were converted
to erasure coding because getTopologyViaGRPC never folded EC file_count
into topology.TotalFiles. Aggregate it with the same max/sum dedupe.
* fix(admin): address PR review comments
- bound RaftListClusterServers with a 3s timeout so the dashboard endpoint
cannot hang on a stalled master
- pre-validate raft addresses with net.SplitHostPort before calling
pb.GrpcAddressToServerAddress, which otherwise glog.Fatalf's on a
malformed entry and would crash the admin process
- when raft is unreachable, mark the fallback master as not-leader rather
than claiming leadership the code cannot verify
- warn when summed EC delete_count exceeds file_count while folding into
topology.TotalFiles, matching collectCollectionStats
* fix(admin): distinguish empty raft response from RPC failure
When RaftListClusterServers returns successfully with no servers, raft is
not initialized (standalone/non-raft cluster), so the single fallback
master is the leader. Only treat the fallback as a non-leader when the
RPC actually failed.
* fix(admin): remove misleading Objects column from S3 buckets page
The bucket "Objects" column displayed needle counts from volume
collection stats, not actual S3 object counts. This is confusing
because a single S3 object can span multiple needles (multipart
uploads, versions) and the count is inaccurate for EC volumes.
Remove the ObjectCount field from S3Bucket, the Objects table column,
the sort-by-objects handler, the detail-view row, and both CSV export
references.
* fix(admin): correct cell indexes in fallback bucket CSV export
After the Objects column was removed, the fallback CSV exporter in
admin.js still used stale cell indexes: cells[1] mapped to Owner
(not Created), cells[2] to Created (not Size), cells[3] to Logical
Size (not Quota). Align all indexes with the current table column
order and include Owner, Logical Size, and Physical Size.
* feat: improve allInOne mode support for admin/volume ingress and fix master UI links
- Add allInOne support to admin ingress template, matching the pattern
used by filer and s3 ingress templates (or-based enablement with
ternary service name selection)
- Add allInOne support to volume ingress template, which previously
required volume.enabled even when the volume server runs within the
allInOne pod
- Expose admin ports in allInOne deployment and service when
allInOne.admin.enabled is set
- Add allInOne.admin config section to values.yaml (enabled by default,
ports inherit from admin.*)
- Fix legacy master UI templates (master.html, masterNewRaft.html) to
prefer PublicUrl over internal Url when linking to volume server UI.
The new admin UI already handles this correctly.
* fix: revert admin allInOne changes and fix PublicUrl in admin dashboard
The admin binary (`weed admin`) is a separate process that cannot run
inside `weed server` (allInOne mode). Revert the admin-related allInOne
helm chart changes that caused 503 errors on admin ingress.
Fix bug in cluster_topology.go where VolumeServer.PublicURL was set to
node.Id (internal pod address) instead of the actual public URL. Add
public_url field to DataNodeInfo proto message so the topology gRPC
response carries the public URL set via -volume.publicUrl flag.
Co-Authored-By: Claude Opus 4.6 <noreply@anthropic.com>
* fix: use HTTP /dir/status to populate PublicUrl in admin dashboard
The gRPC DataNodeInfo proto does not include PublicUrl, so the admin dashboard showed internal pod IPs instead of the configured public URL.
Fetch PublicUrl from the master's /dir/status HTTP endpoint and apply it
in both GetClusterTopology and GetClusterVolumeServers code paths.
Also reverts the unnecessary proto field additions from the previous
commit and cleans up a stray blank line in all-in-one-service.yml.
* fix: apply PublicUrl link fix to masterNewRaft.html
Match the same conditional logic already applied to master.html —
prefer PublicUrl when set and different from Url.
* fix: add HTTP timeout and status check to fetchPublicUrlMap
Use a 5s-timeout client instead of http.DefaultClient to prevent
blocking indefinitely when the master is unresponsive. Also check
the HTTP status code before attempting to parse the response body.
* fix: fall back to node address when PublicUrl is empty
Prevents blank links in the admin dashboard when PublicUrl is not
configured, such as in standalone or mixed-version clusters.
* fix: log io.ReadAll error in fetchPublicUrlMap
---------
Co-authored-by: Claude Opus 4.6 <noreply@anthropic.com>
Co-authored-by: Chris Lu <chris.lu@gmail.com>
Chris Lu