mirror of
https://github.com/seaweedfs/seaweedfs.git
synced 2026-09-12 01:20:45 +02:00
cd7c8ae784ce0394dfd19f8f4d28cd41d853e8cd
87
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 Eliah RusinandChris Lu
|
c006dc563e |
ec: remove .ecsum sidecars on destroy / shard delete; align Go and Rust cleanup (#10307)
* fix(rust-volume): remove .ecsum sidecars on EC destroy / shard delete Rust EcVolume::destroy removed shards and .ecx/.ecj/.vif but left bitrot checksum sidecars (.ecsum / .ecsum.v*). On clusters that run weed-volume (not Go weed volume), collection.delete therefore orphans every sidecar while correctly wiping shards — observed live on 4.39 (14/14 .ecsum survived after collection.delete on a freshly encoded EC volume). Go Destroy already calls RemoveBitrotSidecars; this brings Rust to parity: - hoist remove_bitrot_sidecars into ec_bitrot (shared helper) - call it from EcVolume::destroy for dir / dir_idx / ecx_actual_dir - call it from Store::delete_ec_shards when a disk has no remaining shards - unit test: test_destroy_removes_bitrot_sidecar * rust volume: gate the shard-delete sidecar sweep on a local shard removal Only sweep a disk's .ecsum when this delete actually removed a shard file there, matching Go's found gate: a delete that never touched a disk must not strip a sidecar it does not own — a shared -dir.idx sibling with surviving shards, or an ec.rebuild index-prep copy that lands .ecx/.ecsum before any shard. The shard-presence probe now treats unexpected stat errors as "exists" so a transient failure cannot orphan-classify live shards, and check_all_ec_shards_deleted reuses it. * rust volume: destroy() sidecar sweep needs only the data and idx bases ecx_actual_dir is always one of the two, so the third branch could never run; this is now exactly Go Destroy()'s two-base sweep. * rust volume: call the shared sidecar removal helper directly * rust volume: unit-test remove_bitrot_sidecars Mirrors Go's TestRemoveBitrotSidecars: legacy and versioned sidecars are removed, a shard file and a longer-vid sidecar survive, absent is success. * rust volume: keep the shared idx-base sidecar while a sibling disk has shards One -dir.idx serves every location, so emptying one disk must not sweep <idx>/<vol>.ecsum out from under a sibling that still holds shards. Nothing reads the idx-base sidecar today, but .ecx shows index-dir files are real; this keeps the defensive sweep safe if a writer ever lands one there. * ec shard delete: keep the shared idx-base sidecar while a sibling disk has shards One -dir.idx serves every disk, so emptying one disk must not sweep <idx>/<vol>.ecsum out from under a sibling that still holds shards of the volume — the same gate the Rust volume server applies. A status error counts as in-use so a transient failure never strips it early. * rust volume: drop a shard-only disk's stale .vif with the node's last shard Go's removeEcSharedIndexFiles also clears the data-base .vif in the all-shards-gone pass, gated on .idx absence so a disk still hosting the source volume keeps its live .vif; the Rust delete path left it behind. Unexpected stat errors count as .idx-present so a transient failure never strips a live volume's .vif. --------- Co-authored-by: Chris Lu <chris.lu@gmail.com> |
||
|
|
d0db94c34a |
feat(metrics): Add EC rebuild/reconstruct Prometheus metrics (#10124)
* Review comment removed unnecessary success and failure count * fix: use Gather.Gather() with seeded counter for EC rebuild registration test - Restore Gather.Gather() to verify MustRegister calls as requested in review - Seed VolumeServerECRebuildCounter before gathering because CounterVec only appears after at least one label value is observed - Use correct fully-qualified metric names (SeaweedFS_volumeServer_*) * fix: remove preflight checkEcVolumeStatus failure from ec_rebuild_total counter ec_rebuild_total should only reflect actual rebuild execution failures (from RebuildEcFiles / RebuildEcxFile), not scan/precheck failures in the volume status loop. The error is still returned to the caller; only the misleading counter increment was removed. * Review comment removed unnecessary observe * label EC rebuild duration histogram by result Without a result label, fast failures pull down the success-latency quantiles shown on the EC Rebuild Duration panel. Make the histogram a HistogramVec keyed by result, record success/failure through one recordEcRebuild helper, and split the Grafana quantiles by (le, result). * reset EC rebuild metric vecs in registration test The HistogramVec needs a child before Gather emits it, so the test must observe once; reset both vecs in cleanup so that sample doesn't leak into other tests. --------- Co-authored-by: Ubuntu User <ubuntu@example.com> Co-authored-by: Chris Lu <chris.lu@gmail.com> |
||
|
Chris Lu
|
2efc0e1656 |
ec: recover EC shards whose .ecx index lives only on a peer server (#10108)
* ec: recover EC shards whose .ecx index lives only on a peer server A volume server that boots with EC shard files on disk but no .ecx index on any local disk cannot mount the shards, so the master never learns about them. ec.rebuild works off master-registered shards, so it sees the volume as short and gives up even though the shard data is intact. Add an operator-triggered recovery: VolumeEcShardsMount gains a recover_missing_index flag that makes the volume server fetch the missing .ecx (plus .ecj/.vif) from a peer holding it and mount the on-disk shards. ec.rebuild runs this across the cluster before planning, so orphaned shards register and the rebuild sees the true shard set. .ecx is an immutable encode-time index, identical on every holder. .ecj is a per-holder deletion journal that differs across holders, so the recovered node adopts the source peer's deletion view, like a balanced or rebuilt shard does. * ec: mirror missing-index recovery into the Rust volume server Port the #10104 recovery to seaweed-volume so the Rust volume server self-heals the same layout: EC shards on disk with the .ecx index only on a peer. Adds collect_ec_volumes_missing_index / mount_recovered_ec_shards to the store, recover_missing_ec_indexes (master LookupEcVolume + peer CopyFile fetch + mount) to the server, and the recover_missing_index flag on VolumeEcShardsMount. .ecx is the immutable encode-time index, identical on every holder. .ecj is a per-holder deletion journal, so the recovered node adopts the source peer's deletion view, matching the Go path. |
||
|
Chris Lu
|
c7781bfca2 |
fix(ec): remove shared EC index only when no shard remains node-wide (#9955)
* fix(ec): remove the shared EC index only when no shard remains node-wide deleteEcShardIdsForEachLocation removed the shared .ecx/.ecj/.vif index as soon as a single disk's shard count hit 0, even when a sibling disk of the same node still held shards of the volume (split-disk reconciled layout) -- orphaning those shards without their index. Split the non-teardown delete into two passes: delete the requested shard files (and now-orphaned per-disk bitrot sidecars) on every disk, then remove the shared index only once no shard of the volume remains on ANY disk. This brings the Go volume server in line with the Rust one, which already gates the index removal on a node-wide check. * refactor(ec): reuse checkEcVolumeStatus across the two delete passes Address review: cache hasEcxFile/hasIdxFile from the node-wide count pass and pass them to removeEcSharedIndexFiles instead of re-listing each location's directory. * fix(ec): clean an orphaned EC .vif even when its .ecx is already gone Address review: removeEcSharedIndexFiles returned early on !hasEcxFile, so a node-wide teardown left a stale EC .vif behind when its .ecx was already removed. Decouple the .vif removal (gated on !hasIdxFile) from .ecx presence so the generation metadata doesn't leak once no shard remains node-wide. |
||
|
Chris Lu
|
284796c7b6 |
fix(ec): fence stale-worker EC shard cleanup by encode generation (#9953)
* feat(ec): add encode_ts_ns to the EC task params, shard-unmount, and shard-delete RPCs The generation fence for stale EC-worker cleanup needs the encode generation on three messages: ErasureCodingTaskParams (admin issues it), VolumeEcShardsUnmountRequest, and VolumeEcShardsDeleteRequest (the worker carries it to the volume server). Additive fields only; 0 preserves the existing unfenced behavior. Mirror the two volume-server fields in the Rust volume server's proto copy. * feat(ec): issue the EC encode generation from the admin and carry it on the worker Stamp each EC proposal's encode_ts_ns from the admin's per-cycle DetectionSequence (a single-clock value) so generations are globally ordered even though detection runs on a rotating worker. The worker writes that generation into the distributed .vif and passes it on its shard unmount/delete RPCs; it falls back to a local timestamp for the .vif only on the unfenced legacy/shell path (keeping the read guard on). * fix(ec): fence the stale-worker EC shard unmount and teardown by generation A reaped-but-still-running EC worker's cleanupStaleEcShards issued a generation-blind unmount + full teardown that could unmount and then overwrite a newer run's live shards on a shared node. Both RPCs now carry the encode generation: the volume server unmounts/deletes a disk only when its .vif generation is strictly older than the request, and preserves a same-or-newer generation, a generation-0 (recovered or pre-upgrade) volume, and an unreadable .vif. Unload is per-disk, never node-wide. Request generation 0 keeps the blanket teardown for the shell pre-encode cleanup and pre-upgrade callers. Mirrored in the Rust volume server. * test(ec): cover the generation-fenced teardown and unmount End-to-end volume-server tests: a fenced FullTeardown wipes a strictly- older generation, preserves a newer one, preserves a generation-0 volume, and blanket-wipes on request generation 0; the gen-aware unmount preserves a same-or-newer mounted generation; and the .vif generation reader handles present/absent/no-config cases. * test(ec): pin the fenced .vif==teardown generation and the unreadable-.vif preserve A fenced run must stamp the admin generation verbatim into the .vif so it matches the generation sent on the teardown RPCs; add a regression test that sets the task generation and asserts the .vif carries it exactly. Also cover the present-but-unparseable .vif case (reads as generation 0, preserved) and correct the readEcGenerationTsNs docstring accordingly. * fix(ec): surface EC full-teardown filesystem errors in the Rust volume server remove_ec_volume_files(_full_teardown) discarded every fs::remove_file error, so a teardown that failed on permissions or a full disk still returned full_teardown_done=true and left stale artifacts to collide with the next encode. Return io::Result, ignore NotFound, propagate the first real error, and have the teardown RPC surface it -- matching the Go contract. The best-effort reconcile/load-cleanup callers keep ignoring it. * refactor(ec): reuse the EC volume lookup on unmount and short-circuit the gen read Address review: the Rust unmount fence reuses the ec_vol it already fetched instead of a second find_ec_volume; the Go .vif generation reader breaks out of the data/idx loop early when the two dirs are the same. |
||
|
Chris Lu
|
79ac279fe1 |
fix(ec): don't mix EC shards from different encode runs (#9880)
* feat(ec): add encode_ts_ns to EC shard metadata and the shard read RPC EcShardConfig and VolumeEcShardReadRequest gain an int64 encode_ts_ns (encode time in unix nanos). It rides in .vif and the read request so a read can be scoped to the encode run that produced the index. * fix(ec): stamp each encode and reject cross-run shard reads Generate stamps EncodeTsNs into the volume's .vif. Reads carry it to the shard's owning volume (resolved together via FindEcVolumeWithShard, so a multi-disk server validates the disk that actually serves the bytes) and reject a shard from a different encode run, recovering from parity. A zero on either side (pre-upgrade volume) skips the guard. * fix(ec): stamp the encode identity on the worker-generated .vif The worker-local encode path now writes EncodeTsNs (and the resolved EC ratio) into the .vif, so the read guard is not silently off for volumes encoded by the maintenance worker. * fix(ec): wipe stale EC artifacts before re-encoding VolumeEcShardsGenerate evicts any in-memory EcVolume for the volume and removes its on-disk shard/index/sidecar files before writing fresh ones, so a retried encode never builds on a partial prior run and the unlink frees the inodes instead of leaving open fds serving old bytes. * fix(ec): unmount EC shards across all disks UnmountEcShards walked only the first disk holding the shard, leaving a duplicate copy mounted on a sibling disk (split-disk reconciled volumes) still serving and heartbeating. Traverse every disk and emit one deletion delta per disk. * fix(ec): delete orphan shards without a local .ecx deleteEcShardIdsForEachLocation gated shard-file removal on a local .ecx, so it could not clean an orphan .ecNN left by a failed copy on a disk with no index. Delete the requested shard files unconditionally; the index-file (.ecx/.ecj/.vif) routing stays gated as before. * fix(ec): clear stale EC shards cluster-wide before re-encoding ec.encode unmounts and deletes EC shards for the target volumes on every node before regenerating: fatal for the shards the topology reports (mounted leftovers), best-effort for the rest (a sweep that catches unmounted failed-copy orphans). A down node is a no-op. * fix(ec): don't nil EC fds on close so reads can't race eviction A reader resolves an EcVolume/shard under the lock then reads after it is released, so an eviction that nils ecxFile/ecdFile would race that read and panic. Close the fds without nilling the fields: the field is now write-once (no data race) and a concurrent read hits a closed fd, getting a clean error that the caller recovers from parity. * fix(ec): wipe stale EC artifacts on every disk and surface failures The pre-encode wipe only deleted beside the source volume, so a stale shard on a sibling disk survived and could be mounted against the new index at reconcile. Sweep every disk. Removal also ignored os.Remove errors, reporting a failed cleanup as success and letting a stale shard join the next generation; surface the first real failure (treating already-gone as success) from removeStaleEcArtifacts and the shard delete. * fix(ec): log when a local shard is skipped for a different encode run The cross-run guard returned errShardNotLocal, indistinguishable in logs from a genuinely-absent shard. Add a V(1) line naming both EncodeTsNs so operators can tell "wrong encode generation" from "shard not here". * fix(ec): surface metadata removal failures in the shard delete path deleteEcShardIdsForEachLocation still dropped os.Remove errors on the .ecx/.ecj/.vif/sidecar cleanup. A surviving stale .ecx is the orphan-index condition this path prevents, so route those through removeFileIfExists and return the first real failure instead of reporting cleanup as success. * fix(ec): fail orphan cleanup when a reachable node's delete fails The pre-encode orphan sweep swallowed every error for unreported (node, volume) pairs. That is only safe for an unreachable node, which cannot receive this encode's new generation. A reachable node whose delete genuinely failed (permission/IO) keeps an orphan shard that a later copy re-stamps with the new run's volume-level .vif identity, so the read guard would accept stale data. Surface those; stay best-effort only for unreachable nodes (gRPC Unavailable / no status). * fix(ec): guard ecjFile under its lock in the EC delete path EcVolume.Close nils ecjFile under ecjFileAccessLock; a delete that resolved its .ecx lookup before a concurrent eviction (the generate-time UnloadEcVolume) could then reach the journal append with a nil fd. Bail with a clear "volume closed" error under the lock instead. * fix(ec): reject an unstamped shard when the caller has an encode identity The read guard required both identities nonzero, so a current (stamped) caller accepted a holder with identity 0 and could be served a stale pre-upgrade shard. Reject when the caller is stamped and the holder differs (including unstamped); stay lenient only when the caller itself has no identity (pre-upgrade reader). A skipped shard recovers from parity. * fix(ec): full-teardown delete so cluster cleanup wipes a whole generation The pre-encode cluster sweep deleted only the listed canonical shards on remote nodes, leaving index/sidecar (and, on builds with versioned generations, those too) behind. Add a full_teardown flag to VolumeEcShardsDelete that evicts the volume and wipes every EC artifact for it on every disk via removeStaleEcArtifacts; the shell and worker pre-encode cleanup paths set it. Other delete callers (balance/decode/repair) are unchanged. * fix(ec): take ecjFileAccessLock before the nil-check in Sync and Close Sync and Close read ev.ecjFile before acquiring ecjFileAccessLock while Close nils it under the lock, a data race on the field. Take the lock first, then nil-check inside, in both. * fix(ec): acknowledge full_teardown so a pre-upgrade server can't fake success An old volume server silently ignores full_teardown and returns success for an ordinary delete, so the caller wrongly believes the generation was wiped and copies a fresh gen-0 onto an unwiped node. Echo full_teardown_done in the response; the worker destination cleanup fails when it is absent, and the shell cluster sweep fails for a reported (mounted) leftover while staying best-effort for an unreported node. encode_ts_ns stays an accepted transient (an old server just skips the new read guard, no regression). * fix(ec): fail the pre-encode sweep for any reachable node that can't ack teardown A reachable pre-upgrade server ignores full_teardown and returns success without wiping an orphan, which a later copy then folds into the new generation. Treat a missing full_teardown_done ack as fatal for every reachable node (best-effort only for a gRPC-unreachable one), not just for topology-reported pairs. * fix(ec): return the served shard identity and validate it client-side The encode identity was only enforced server-side, so a pre-upgrade server ignored the request field and served bytes unchecked. Echo the served shard's EncodeTsNs on every read response chunk and have the client reject a mismatch (including 0 from an old server), so the guard holds regardless of server version; a rejected read recovers from parity. * fix(ec): reject a short/empty remote shard read instead of serving zeros doReadRemoteEcShardInterval accepted an immediate EOF or a short stream and returned success with a partly zero-filled, unvalidated buffer (the server stamps the identity only on chunks that carry bytes). A non-deleted interval must arrive whole: require n == len(buf), exempting the is_deleted short-circuit (n=0), matching readLocalEcShardInterval's local check. A short read now fails so the caller recovers from parity. * test(ec): fake volume server echoes the full_teardown acknowledgement The worker now fails a teardown delete that isn't acknowledged (so a pre-upgrade server can't silently skip the wipe). The fake server's no-op VolumeEcShardsDelete returned an empty response, which the worker read as a skipped teardown and aborted the encode. Echo full_teardown_done. * feat(ec): mirror the encode-run identity guard + full_teardown into the Rust volume server The Go volume server stamps an encode-run identity (encode_ts_ns) into the .vif and rejects a read served from a shard of a different run; full_teardown wipes a whole generation and acknowledges it. The Rust volume server had none of it. Mirror the shared logic: load encode_ts_ns from the .vif onto the EcVolume, stamp it on every read response, and reject a request/response mismatch on both the server and the distributed-read client (recovering from parity); handle full_teardown by evicting the volume and wiping every EC artifact on each disk, echoing full_teardown_done so the caller can detect a server that ignored it. * fix(ec): remove a stale .vif on full teardown of a shard-only node A shard copy installs shards + .ecx before .vif, so an interrupted copy after a teardown could mount the new files under the previous run's identity / version / shard ratio / dat_file_size carried by the surviving .vif. Remove .vif during full teardown, gated on .idx absence so a source-volume holder keeps its live .vif. In Rust this lives in a teardown-only helper so the reconcile / load- fallback paths (which share the base removal) still preserve .vif. * fix(ec): treat a missing teardown ack as fatal, not as an unreachable node isNodeUnreachable returned true for any non-gRPC-status error, so a reachable pre-upgrade server's missing full_teardown_done ack (a plain error) was classified unreachable and the unreported pair was silently skipped. Classify only a real codes.Unavailable as unreachable, and wrap the missing ack in a sentinel the sweep treats as fatal regardless. A genuinely down node still surfaces as Unavailable from the RPC and stays best-effort. * fix(ec): reject a short shard read in the local EC needle reader read_ec_shard_needle ignored the byte count from shard.read_at and appended the whole pre-sized buffer, so a truncated shard's zero-filled tail passed the later length check and parsed as garbage. Require n == buf.len() per interval, erroring on a short read like the local interval reader already does. * fix(ec): probe reachability before skipping a node that returns Unavailable The pre-encode sweep skipped any node whose teardown delete returned codes.Unavailable, but a reachable volume server in maintenance mode also returns that code for the maintenance-gated delete, so its stale EC files were left behind on a node that can still receive the new generation. Confirm with a non-maintenance-gated empty-target Ping: skip only when the node fails the probe too (genuinely unreachable). * fix(ec): use try_exists for the teardown .vif .idx guard The teardown-only .vif removal gated on Path::exists(), which returns false on a permission/IO stat error, so a stat failure on a present .idx would read as a shard-only node and delete the live source volume's .vif. Gate on try_exists() == Ok(false) instead, preserving the sidecar on any stat error. * fix(ec): only skip a sweep node when a Ping confirms it is transport-down The pre-encode sweep skipped a node whenever its teardown delete and a liveness Ping both failed, but it treated ANY Ping error as down — an application-level Internal/ResourceExhausted, or Unimplemented from a pre-Ping server, left a reachable node's stale generation in place. Classify the Ping tri-state and skip only when it transport-fails with codes.Unavailable; a reachable or inconclusive node stays fatal. * fix(ec): exclude sweep-skipped nodes from the encode's rebalance The pre-encode sweep skips a genuinely-down node best-effort, but the rebalance then recollected the current topology — a node that recovered between the two could become a copy target and receive the new generation while still holding its stale, never-cleared shards. Have the sweep return the skipped set and exclude those nodes from the rebalance for this encode, so a node we could not clean cannot receive the new generation. Standalone ec.balance is unaffected. * fix(ec): re-sweep recovered nodes before generation so they aren't stranded A node skipped as down by the pre-encode sweep is excluded from the rebalance, but it can recover and become the generation host — mounting all shards locally, then being excluded from distribution. Union-only verification accepts all shards on one node and deletes the originals: a single point of failure. Re-sweep the skipped nodes just before generation; one whose teardown now succeeds leaves the skipped set and rebalances normally, while a node still down stays skipped. * fix(ec): abort the encode if a selected source is still skipped after re-sweep The re-sweep un-skips a recovered node, but the source was selected before it and a node can stay down through the re-sweep then recover just in time to be the generation host — mounting all shards locally while still excluded from the rebalance, which union-only verification accepts before deleting the originals. Abort the encode when a selected source remains skipped after the re-sweep. * fix(ec): batch delete returns retriable 503 when a volume became EC mid-batch If a volume is not EC at the batch-delete classification but is encoded to EC and its .dat deleted before the regular-volume mutation, the mutation returns an exact "not found" that the filer chunk-GC treats as completed, dropping the delete. Recheck EC presence under the mutation lock and return a retriable 503 with the "try again" token so the filer requeues it onto the EC path. * fix(ec): recheck EC state before the regular batch-delete mutation ec.encode mounts EC shards (copied from the .dat) before deleting the originals, so a volume can be EC while its .dat still exists. The batch delete only rechecked EC after a NotFound, so a successful regular-volume delete in that window wrote a tombstone to the soon-removed .dat — the delete was lost and the needle resurrected from the pre-tombstone shards. Recheck has_ec_volume under the write lock before delete_volume_needle and return a retriable 503 so the filer requeues onto the EC path. * fix(volume): make the metrics push test independent of test order test_push_metrics_once asserted the pushed body contains the request-counter family without ever touching the counter — a CounterVec with no children emits nothing, so the assertion only held when another test had already created a labelset in the shared registry. Create one in the test itself. |
||
|
Chris Lu
|
9658f309d2 |
EC bitrot detection: per-shard checksum sidecars (#9761)
* ec: add EC bitrot checksum protobuf EcBitrotProtection/EcShardChecksums/ChecksumAlgorithm sidecar messages, copy_ecsum_file and unsafe_ignore_sidecar fields, and a CHECKSUM scrub mode. * ec: bitrot checksum sidecar format, validation, and per-volume load Per-shard CRC32C block checksums in an optional <base>.ecsum sidecar with a self-integrity header; validation, rolling builder, backfill primitive, and EcVolume load on mount + removal on destroy. * ec: capture per-shard checksums at encode; verify-and-exclude on rebuild WriteEcFilesWithContext returns the protection computed inline during encoding. generateMissingEcFiles verifies present inputs against the sidecar, excludes corrupt ones, regenerates in place, and re-verifies; fail-closed unless unsafe_ignore_sidecar, removing all generated outputs on failure. * ec: read-only checksum scrub with Reed-Solomon arbiter ChecksumScrub verifies each local shard against the sidecar and reconstructs flagged shards from the clean shards so stale-sidecar false positives are not reported. Wired to the gRPC CHECKSUM mode and ec.scrub -mode checksum. * ec: server-side bitrot sidecar write, copy, cleanup, and opportunistic backfill Write .ecsum at fresh encode; propagate it with copy_ecsum_file (tolerant); remove it on full delete and decode; rebuild honors unsafe_ignore_sidecar and opportunistically backfills a sidecar when all shards are reachable. * ec: volume server bitrot config flags -ec.bitrotChecksum (default on) and -ec.bitrotBlockSizeMB (default 16). * fix(ec_bitrot): bound -ec.bitrotBlockSizeMB before the int64 multiply Validate the MiB value is in [1, 1024] before multiplying by 1 MiB, so a huge flag value cannot overflow int64 and slip past the power-of-two check, and a block size cannot collapse a sidecar to a few oversized blocks. * fix(ec_bitrot): distribute the .ecsum sidecar from the worker encode path The worker EC encode wrote the generation-0 sidecar locally but never added it to shardFiles, so DistributeEcShards never shipped it and the distributed holders came up unprotected. Append it to shardFiles and map the ecsum shard type to its extension in the sender so it travels with the shards. * fix(ec_bitrot): remove orphaned sidecars when the generation is gone Gate sidecar removal on existingShardCount==0 alone rather than also requiring a stray .ecx. A sidecar whose shards have all been deleted is orphaned and must be removed even when no .ecx remains, or it leaks. .ecx/.ecj/.vif removal stays gated on hasEcxFile as before. * fix(ec_bitrot): do not fold checksum blocks scanned into TotalFiles ChecksumScrub's first return is blocks scanned, not files. Discard it so the scrub response's TotalFiles (a needle/file count) is not inflated by the block count for CHECKSUM mode. * test(ec_bitrot): clean up generated .ecsum sidecars in removeGeneratedFiles * fix(ec_bitrot): reject an oversized sidecar payload before the uint32 cast The header stores payload_len as a uint32; bound the payload before the conversion so a pathological manifest cannot truncate the length field and corrupt the sidecar. A real manifest is a few KB, so this never trips. * fix(ec_bitrot): cap -ec.bitrotBlockSizeMB at 64 MiB The block size becomes the per-shard scratch buffer the scrub/backfill path allocates, so an over-large value (e.g. 1 GiB) is a memory hazard per concurrent scrub worker. Lower the upper bound from 1024 to 64 MiB. * fix(ec_bitrot): add -ecUnsafeIgnoreSidecar to weed tool fix -ecx The -ecx recovery path reconstructs missing shards via RebuildEcFilesWithContext, which fails closed on a malformed/stale .ecsum. Without an override flag an operator could not complete the rebuild without manually deleting the sidecar. Expose -ecUnsafeIgnoreSidecar (default false) and thread it through. * fix(ec_bitrot): bound sidecar payload with a direct int constant; drop readFull Guard len(payload) against a plain int constant (1 GiB) before the allocation instead of a uint64 MaxUint32 compare, so the allocation-size value is provably bounded (clears the CodeQL overflow alert) and the math import is no longer needed. Inline os.File.ReadAt with io.EOF handling in verifyShardFileBlocks and remove the now-redundant readFull helper (os.File.ReadAt fills the slice or errors). * test(ec_bitrot): use slices.Contains instead of a hand-rolled containsU32 * refactor(ec): fold the EcFiles WithContext variants into the base functions RebuildEcFiles now takes the *ECContext directly (nil => derive from .vif as before) and WriteEcFiles takes it too (nil => default), removing the parallel RebuildEcFilesWithContext / WriteEcFilesWithContext names. Callers that had an explicit context drop the WithContext suffix; the default-context callers pass nil. No behavior change. * refactor(ec): pass BackgroundECContext instead of nil to Write/RebuildEcFiles Add a non-nil BackgroundECContext placeholder (analogous to context.Background()) and have callers with no specific layout pass it instead of a nil *ECContext. WriteEcFiles resolves a zero/background context to the default ratio and RebuildEcFiles resolves it from the .vif, so behavior is unchanged. * fix(ec_bitrot): make BackgroundECContext a func; RebuildEcFiles fails closed on bad .vif - BackgroundECContext is now a function returning a fresh *ECContext, so callers cannot mutate a shared singleton or race on it (and it mirrors context.Background, which is also a function). - RebuildEcFiles now propagates the MaybeLoadVolumeInfo error: a present-but- unreadable .vif fails closed instead of silently rebuilding with the default ratio (which would corrupt a custom-ratio volume). Pass an explicit ctx to override. |
||
|
Chris Lu
|
77ac781bbd |
fix(ec): VolumeEcShardsInfo walks every disk on multi-disk servers (#9568)
* fix(ec): VolumeEcShardsInfo walks every disk on multi-disk servers When a volume server holds EC shards for the same vid across more than one disk, each DiskLocation registers its own EcVolume entry and Store.FindEcVolume returns whichever one it hits first. The shard-info RPC iterated only that single EcVolume's Shards, so the response missed every shard mounted on a sibling disk. The worker's verifyEcShardsBeforeDelete sums the per-server responses into a union bitmap and refuses to delete the source volume when the union falls short of dataShards+parityShards. On multi-disk destinations, the union was systematically under-counted and source deletion got blocked even though all shards were physically present and mounted. Walk every DiskLocation in the handler and emit the deduplicated union of all shards. The .ecx-backed fields (file counts, volume size) still come from a single EcVolume since every disk's entry opens the same .ecx via NewEcVolume's cross-disk fallback. Tests: - TestVolumeEcShardsInfo_AggregatesAcrossDisks unit test in weed/server/. - test/volume_server/grpc/ec_verify_multi_disk_test.go integration test drives the full generate -> mount -> redistribute -> restart -> reconcile path and asserts both VolumeEcShardsInfo and VerifyShardsAcrossServers + RequireFullShardSet (the production source-deletion gate) report all 14 shards. - ec_multi_disk_lifecycle_test.go tightened: replaces the "VolumeEcShardsInfo only sees one disk's EcVolume" workaround with a full-shard-set assertion. * review: use ShardBits bitmask + cap-pre-allocation for shard dedup |
||
|
Chris Lu
|
68794fb94c |
fix(ec_distribute): remove partial files on copy stream error (#9543)
* fix(ec_distribute): remove partial files on copy stream error writeToFile opens the destination with O_TRUNC and streams into it. On a mid-stream receive / write / cancellation error it returned the failure but left the destination behind in whatever state had been written so far — typically 0 bytes when the source errored before sending any FileContent. VolumeEcShardsCopy distributes .ecx by calling doCopyFile, so this same stub-leaving behaviour produced the 0-byte .ecx files seen on EC encoding failures: the source claims a non-zero ModifiedTsNs (so the existing "source not found" cleanup doesn't fire), the stream then errors immediately, and the receiver ends up with a 0-byte .ecx that downstream code mistook for a valid empty index. Clean up the partial file on every error path that returns from the streaming loop (receive, write, and cancellation). Skip cleanup when isAppend=true so resumable appends keep their existing content. As defense in depth, VolumeEcShardsCopy also stats the .ecx after copy and removes / errors on a 0-byte result so the orchestrator can pick a different source. The Rust volume server has only the source side of CopyFile (no client-side stream-to-disk consumer) and no .ecx subsystem yet, so this fix has no Rust mirror. * fix(ec_distribute): close file before remove, fail fast on stat error Address review feedback: - writeToFile's mid-stream removeIncomplete called os.Remove while the destination file handle was still open. On Windows os.Remove fails while a handle is open, so the cleanup wouldn't run there. Wrap the handle close in a once-only helper, call it from removeIncomplete and from the existing "source not found" cleanup, and keep a deferred close as the safety net for the normal-return path. - VolumeEcShardsCopy's post-copy .ecx check silently passed when os.Stat returned an error: doCopyFile had reported success but if the file was already gone, unreadable, or somehow a directory, the orchestrator only learned at mount time with no useful context. Treat any non-nil stat error and any directory result as a copy failure here and surface it immediately. |
||
|
Chris Lu
|
2a41e76101 |
fix(ec): blanket-clean every destination over the full shard range (#9512)
* fix(ec): blanket-clean every destination over the full shard range The previous cleanup pass walked t.sources only, with the shard ids the topology had reported at detection time. In the wild, a destination can end up with EC shards mounted that the topology snapshot didn't list — shards on a sibling disk that hadn't heartbeated, or shards left over from a concurrent attempt's mount step. FindEcVolume still returns true, so the next ReceiveFile trips the mounted-volume guard. Cleanup now unions t.sources (with ShardIds) and t.targets and issues unmount + delete over [0..totalShards-1] on each. Both RPCs are idempotent on missing shards, so the wider sweep is free. Two new tests cover the gap: shards mounted beyond what t.sources lists, and a target-only destination with no source row. * log(ec): include disk_id in EC unmount/delete/refusal log lines The current logs identify the volume and shard but leave disk_id off, which makes the cross-server cleanup story hard to follow when multiple disks of one server hold pieces of the same volume: UnmountEcShards 4121.1 -> add disk_id ec volume video-recordings_4121 shard delete [1 5] -> add per-loc disk_id volume server X:Y deletes ec shards from 4121 [...] -> add disk_id ReceiveFile: ec volume 4121 is mounted; refusing... -> add disk_ids ReceiveFile's refusal now names the disk_ids actually holding the mount so operators can see whether the next cleanup pass needs to target a sibling disk. Added Store.FindEcVolumeDiskIds / Store::find_ec_volume_disk_ids as the supporting primitive. Mirrored in seaweed-volume/src/ (unmount log in Store::unmount_ec_shard, heartbeat delete log in diff_ec_shard_delta_messages, refusal in the ReceiveFile handler). * test(ec): stub VolumeEcShardsUnmount/Delete on the fake volume server The plugin-worker EC tests boot a fake volume server that embeds UnimplementedVolumeServerServer. After the worker started calling VolumeEcShardsUnmount + VolumeEcShardsDelete pre-distribute, the default Unimplemented response surfaced as fourteen "method not implemented" errors and TestErasureCodingExecutionEncodesShards failed. Both RPCs are no-ops here — nothing on the fake server has mounted state or persisted shard files to remove. |
||
|
Chris Lu
|
d5c0a7b153 |
fix(ec): make multi-disk same-server EC reads work + full-lifecycle integration test (#9487)
* fix(master): include GrpcPort in LookupEcVolume response LookupVolume already passes loc.GrpcPort through to the client; LookupEcVolume builds Location with only Url / PublicUrl / DataCenter, so callers fall back to ServerToGrpcAddress (httpPort + 10000). On any deployment where that convention does not hold — multi-disk integration tests, custom port layouts — EC reads dial the wrong port and quietly degrade to parity recovery. * fix(volume/ec): probe every DiskLocation when serving local shard reads reconcileEcShardsAcrossDisks (issue 9212) registers each .ec?? against the DiskLocation that physically owns it, so a multi-disk volume server can hold shards for the same vid in two separate ecVolumes — one per disk — with .ecx on whichever disk owned the original .dat. The read path only consulted the single EcVolume FindEcVolume picked, so requests for shards on the sibling disk fell through to errShardNotLocal and then to remote/loopback recovery. Walk all DiskLocations after the first probe in both readLocalEcShardInterval and the VolumeEcShardRead gRPC handler; the latter also covers the loopback that recoverOneRemoteEcShardInterval falls back to when a peer dial fails. * test(volume/ec): cover the multi-disk EC lifecycle end-to-end Two integration tests against a real volume server with two data dirs: TestEcLifecycleAcrossMultipleDisks drives encode -> mount -> HTTP read -> drop .dat -> stop -> redistribute shards across disks -> restart -> verify reconcileEcShardsAcrossDisks attached the orphan shards and reads still work -> blob delete -> stop -> drop a shard -> restart -> VolumeEcShardsRebuild pulls input from both disks -> reads still work. TestEcPartialShardsOnSiblingDiskCleanedUpOnRestart is the issue 9478 reproducer at the cluster level: seed a healthy .dat on disk 0, plant the on-disk footprint of an interrupted EC encode on disk 1, restart, and assert pruneIncompleteEcWithSiblingDat wipes disk 1 without touching disk 0. Framework gets RestartVolumeServer / StopVolumeServer helpers; the previous run's volume.log is rotated to volume.log.previous so a startup regression on the second run does not lose the first run's diagnostics. * review: trim verbose comments * review: drop racy fast-path, use locked findEcShard directly gemini-code-assist flagged the two-step lookup in readLocalEcShardInterval and VolumeEcShardRead: the first probe (ecVolume.FindEcVolumeShard) reads the EcVolume's Shards slice without holding ecVolumesLock, so a concurrent mount / unmount could race with it. findEcShard already walks every DiskLocation under the right lock, so the fast-path adds nothing but the race. Collapse both call sites to a single locked call. Also note in RestartVolumeServer why the log-rotation error is swallowed: absence on first call is benign; anything else surfaces in the next os.Create in startVolume. |
||
|
Chris Lu
|
532b088262 |
fix(ec): preserve source disk type across EC encoding (#9423) (#9449)
* fix(ec): carry source disk type on VolumeEcShardsMount (#9423) When EC shards land on a target whose disk type differs from the source volume's, master heartbeats wrongly reported under the target disk's type. Add source_disk_type to VolumeEcShardsMountRequest; the target server applies it to the in-memory EcVolume via SetDiskType so the mount notification and steady-state heartbeat both carry the source's disk type. Empty value falls back to the location's disk type (used by disk-scan reload paths). The override is not persisted with the volume — disk type stays an environmental property and .vif remains portable. * fix(ec): plumb source disk type through plugin worker (#9423) Add source_disk_type to ErasureCodingTaskParams (field 8; 7 reserved), populate it from the metric the detector already collects, thread it through ec_task into the MountEcShards helper, and forward it on the VolumeEcShardsMount RPC. * fix(ec): mirror source disk type plumbing in rust volume server (#9423) The volume_ec_shards_mount handler now forwards source_disk_type into mount_ec_shard → DiskLocation::mount_ec_shards. When non-empty it overrides ec_vol.disk_type (and each mounted shard's disk_type) via the new set_disk_type method; empty value keeps the location's disk type, so disk-scan reload and reconcile paths are unchanged. Also picks up two pre-existing proto drifts that 'make gen' synced from weed/pb (LockRingUpdate in master.proto, listing_cache_ttl_seconds in remote.proto). * feat(ec): bias placement toward preferred disk type (#9423) Add DiskCandidate.DiskType and PlacementRequest.PreferredDiskType. When PreferredDiskType is non-empty, SelectDestinations partitions suitable disks into matching/fallback tiers and runs the rack/server/ disk-diversity passes on the matching tier first; the fallback tier is only consulted if the matching pool can't satisfy ShardsNeeded. PlacementResult.SpilledToOtherDiskType lets callers warn on spillover. Empty PreferredDiskType keeps the existing single-pool behavior. * fix(ec): plumb source disk type into placement planner (#9423) diskInfosToCandidates now copies DiskInfo.DiskType into the placement candidate, and ecPlacementPlanner.selectDestinations forwards metric.DiskType as PreferredDiskType so EC shards land on disks matching the source volume's disk type when possible. A glog warning fires when placement had to spill to other disk types. * test(ec): integration coverage for source-disk-type plumbing (#9423) store_ec_disk_type_test exercises Store.MountEcShards end-to-end: a shard physically lives on an HDD location, MountEcShards is called with sourceDiskType="ssd", and the test asserts that the in-memory EcVolume, the mounted shard, the NewEcShardsChan notification, and the steady-state heartbeat all report under the source's disk type. A companion test pins the empty-source path so disk-scan reload keeps the location's disk type. detection_disk_type_test exercises the worker plumbing: with a cluster of nodes carrying both HDD and SSD disks, planECDestinations must place every shard on SSD when metric.DiskType="ssd"; with only one SSD node and 13 HDD nodes it must still satisfy a 10+4 layout via spillover (and log a warning). * revert(ec): drop unrelated proto drift in seaweed-volume/proto (#9423) make gen pulled two pre-existing OSS changes into the rust proto tree (LockRingUpdate / by_plugin in master.proto, listing_cache_ttl_seconds in remote.proto). Reviewers flagged it as scope creep — none of the rust EC fix references those fields. Restore both files to origin/master so this branch only touches EC-related symbols. * fix(ec placement): treat empty disk type as hdd and skip used racks on spill (#9423) partitionByDiskType used raw string comparison, so a PreferredDiskType of "hdd" never matched candidates whose DiskType is "" (the HardDriveType sentinel that weed/storage/types uses). EC encoding of an HDD source would spill onto any HDD reporting "" even when the cluster has plenty of matching capacity. Normalize both sides through normalizeDiskType, which lowercases and folds "" → "hdd", mirroring types.ToDiskType without taking a dependency on it. selectFromTier's rack-diversity pass also kept revisiting racks the preferred tier had already used when running on the fallback tier, which negated PreferDifferentRacks on spillover. Skip racks already in usedRacks so fallback placements still spread onto new racks. * fix(ec): empty-source remount must not clobber existing disk type (#9423) mount_ec_shards_with_idx_dir runs more than once per vid (RPC mount, disk-scan reload, orphan-shard reconcile). After an RPC sets the source-derived disk type, any later call passing source_disk_type="" was resetting ec_vol.disk_type back to the location's value, which reintroduces the heartbeat drift this PR is meant to fix. Only default to the location's disk type when the EC volume is fresh (no shards mounted yet); otherwise leave the recorded type alone so empty-source reloads preserve whatever the original mount RPC set. |
||
|
Chris Lu
|
2417ba0354 |
fix(volume): add authentication to destructive gRPC admin endpoints (#8876)
* fix(volume): add authentication to destructive gRPC admin endpoints Three destructive VolumeServer gRPC endpoints (DeleteCollection, VolumeDelete, VolumeServerLeave) had no authentication checks, unlike their HTTP counterparts which are protected by the Guard whitelist. Add IsWhiteListed(host) to security.Guard and a checkGrpcAdminAuth helper on VolumeServer that extracts the peer IP from gRPC context and validates it against the guard whitelist. Gate all three endpoints behind this check. * fix(volume): tolerate unparseable gRPC peer address in admin auth check S3 Filer Group integration tests were failing with PermissionDenied "bad peer address: address @: missing port in address" when DeleteCollection ran across the in-process gRPC connection between filer and volume server — the peer addr surfaces as "@" there and net.SplitHostPort can't parse it. The check rejected before IsWhiteListed could exercise its allow-all path for empty-whitelist deployments. Hand the raw peer string to IsWhiteListed when SplitHostPort fails. With no whitelist configured (the test environment's mode) it accepts; with a whitelist configured the unparseable host won't match anything and the call still gets denied as it should. Adds three regression tests for IsWhiteListed pinning the empty-config allow-all, populated-list reject-unknown, and signing-key-only allow- all branches that the gRPC admin helper relies on. * refactor(security): dedup checkWhiteList through IsWhiteListed The HTTP-side checkWhiteList and the gRPC-side IsWhiteListed had the same lookup logic in two places; future drift was just a matter of time. Have checkWhiteList delegate so the membership semantics live in exactly one function. Behaviour is unchanged: the new path still returns nil for isEmptyWhiteList (signing-key-only mode) and still rejects unknown hosts when a whitelist is configured. Addresses gemini medium review on PR #8876. * fix(volume): protect remaining state-altering gRPC admin endpoints DeleteCollection, VolumeDelete, and VolumeServerLeave were the truly-destructive endpoints, but AllocateVolume, VolumeMount, VolumeUnmount, VolumeConfigure, VolumeMarkReadonly, and VolumeMarkWritable also modify server state and should sit behind the same whitelist gate. Read-only endpoints (VolumeStatus, VolumeServerStatus, VolumeNeedleStatus, Ping) stay open. The check is a no-op when no whitelist is configured (the default), so existing deployments keep working; operators who lock down their volume servers via guard.white_list now get consistent coverage. Addresses gemini security-high review on PR #8876. * fix(volume): typed peer addr + audit log for gRPC admin auth Prefer a typed *net.TCPAddr when extracting the peer IP — string parsing was already a fallback for the in-process case but using the typed form first is cleaner and skips an unnecessary parse on the common path. Log failed authorization attempts at V(0) so an operator running with a whitelist sees the host that was rejected (and the raw remote address in case the IP lookup itself was the failure mode), matching what the HTTP Guard already does. Addresses gemini medium review on PR #8876. * fix(volume): protect vacuum + scrub + EC-shards-delete admin endpoints Five more master/admin-driven destructive operations live outside volume_grpc_admin.go and were missing the same whitelist gate: - VacuumVolumeCompact, VacuumVolumeCommit, VacuumVolumeCleanup - ScrubVolume - VolumeEcShardsDelete VacuumVolumeCheck stays open (read-only). BatchDelete also stays open: it's the data-plane multi-object delete called from the S3 API and filer, not an admin operation; gating it would break ordinary S3 DeleteObjects calls. Addresses gemini security-high review on PR #8876. * fix(volume): simplify no-peer-info branch in gRPC admin auth The IsWhiteListed("") fallback was defending against a scenario that doesn't actually arise — real gRPC connections always populate peer info. Drop the branch and just deny when peer info is missing, which is the safer default and matches "if we don't know who the caller is, refuse". * fix(volume-rust): mirror gRPC admin auth on the rust volume server The rust volume server has the same set of destructive admin endpoints as the Go side and the same Guard infrastructure, but nothing was wired together — every endpoint accepted unauthenticated calls regardless of guard configuration. Same vulnerability class the Go fix on this PR closes; this commit closes it on the rust side too so the two stacks stay aligned. Adds VolumeGrpcService::check_grpc_admin_auth that pulls the peer SocketAddr off the tonic Request and runs Guard::check_whitelist on its IP, then applies the helper to the same set the Go side covers: DeleteCollection, AllocateVolume, VolumeMount, VolumeUnmount, VolumeDelete, VolumeMarkReadonly, VolumeMarkWritable, VolumeConfigure, VacuumVolumeCompact, VacuumVolumeCommit, VacuumVolumeCleanup, VolumeServerLeave, ScrubVolume, VolumeEcShardsDelete. Read-only endpoints stay open; BatchDelete stays open as a data-plane multi-object delete. |
||
|
Chris Lu
|
5fbe39320c |
fix(volume_server): pin EC shard auto-select to the .ecx-owning disk (#9212) (#9245)
* fix(volume_server): pin EC shard auto-select to the .ecx-owning disk (#9212) ec.rebuild only sets CopyEcxFile=true on the first shard sent to the rebuilder; subsequent shards rely on VolumeEcShardsCopy / ReceiveFile auto-select to land on the same disk. The old auto-select used FindEcVolume (in-memory) to detect the "already has this volume" case. Mid-rebuild, no EC volume has been mounted yet on the destination, so FindEcVolume returns nothing and the fallback picks "any HDD with free space" — which can split shards from their .ecx across disks of the same node and feed the orphan-shard layout reported in #9212 / fixed on the loader side in #9244. Add Store.FindEcShardTargetLocation as the canonical placement primitive: prefer a mounted EC volume, then a disk that has the .ecx on disk, then any HDD, then any disk. DiskLocation.HasEcxFileOnDisk is the new on-disk check, and it looks at IdxDirectory first with a fallback to Directory to handle .ecx written before -dir.idx was configured. Both VolumeEcShardsCopy and ReceiveFile now route through the new helper, dropping their duplicated 4-level fallback ladder. No protocol changes; explicit DiskId callers are unaffected. * fix(volume_server): treat directories named *.ecx as no-match in HasEcxFileOnDisk os.Stat(".ecx") succeeds for both files and directories. If something happens to leave a directory named X.ecx in the data or idx folder, HasEcxFileOnDisk would currently report true and FindEcShardTargetLocation would route shards to that disk — where NewEcVolume's eventual OpenFile(O_RDWR) on the same path errors out. Add a !info.IsDir() check on both stat sites. Cheap and conservative. Suggested in PR #9245 review by @gemini-code-assist. * refactor(volume_server): collapse EC placement helper to a single pass FindEcShardTargetLocation called FindFreeLocation up to four times. Each call iterates s.Locations and acquires VolumesLen / EcShardCount RLocks per disk — for a typical 4-disk node that's 32 RLock cycles per placement decision. Walk s.Locations once, score each disk by tier (mounted > .ecx-on-disk > HDD > any-disk), break ties by free count. The free-slot math is factored into a small helper that mirrors FindFreeLocation's formula without re-entering the location's locks. Behaviour is unchanged: each existing tier still wins over later tiers, and within a tier the disk with the most free count still wins, matching the original max-tracking in FindFreeLocation. Suggested in PR #9245 review by @gemini-code-assist. * refactor(volume_server): thread dataShardCount as a parameter through EC placement ecFreeShardCount and FindEcShardTargetLocation referenced erasure_coding.DataShardsCount directly. Take it as a parameter so custom-ratio builds (e.g. enterprise) can swap the default without touching the helper itself, and so unit tests can pin a specific ratio independent of the package constant. Default callsites in VolumeEcShardsCopy and ReceiveFile now pass the package default explicitly; tests pass a literal 10 for clarity. * fix(volume_server): treat MaxVolumeCount=0 as unlimited in EC placement ecFreeShardCount computed `MaxVolumeCount - VolumesLen()` and went negative when MaxVolumeCount was 0 — the "unlimited disk" sentinel already honoured by Store.hasFreeDiskLocation and friends. With a negative free count, FindEcShardTargetLocation's `freeCount <= 0` guard skipped the disk entirely, so unlimited disks could never receive EC shards via the placement helper. Special-case MaxVolumeCount<=0: report a synthetic large free count that decrements with current usage, so unlimited disks are eligible and tie-breaks still prefer the less-loaded one. Added TestFindEcShardTargetLocation_HonoursUnlimitedDisk as the regression. Reported in PR #9245 review by @gemini-code-assist. * fix(volume_server): account in shard slots, not volume slots, in ecFreeShardCount FindFreeLocation in store.go ends with `free /= DataShardsCount`, converting "shard slots free" back to "volume-equivalent slots." The truncation is harmless there, but my new ecFreeShardCount inherited the same final divide and re-introduced exactly the orphan-shard hazard #9245 was meant to prevent: with MaxVolumeCount=1, VolumesLen=0, EcShardCount=1 the formula reports 0 even though the disk has room for 9 more shards, so subsequent shards route off the .ecx-owning disk into the HDD-fallback tier. Drop the trailing divide and return the count directly in shard slots. Same shape, finer granularity; tie-breaks still order by free count. The unlimited branch's "used" calculation is updated to match (mix volume-slots and shard-slots in shard units). Added TestFindEcShardTargetLocation_TightProvisioningKeepsEcxDisk as the regression. Reported in PR #9245 review by @coderabbitai. |
||
|
Chris Lu
|
940eed0bd3 |
fix(ec): generate .ecx before EC shards to prevent data inconsistency (#8972)
* fix(ec): generate .ecx before EC shards to prevent data inconsistency In VolumeEcShardsGenerate, the .ecx index was generated from .idx AFTER the EC shards were generated from .dat. If any write occurred between these two steps (e.g. WriteNeedleBlob during replica sync, which bypasses the read-only check), the .ecx would contain entries pointing to data that doesn't exist in the EC shards, causing "shard too short" and "size mismatch" errors on subsequent reads and scrubs. Fix by generating .ecx FIRST, then snapshotting datFileSize, then encoding EC shards. If a write sneaks in after .ecx generation, the EC shards contain more data than .ecx references — which is harmless (the extra data is simply not indexed). Also snapshot datFileSize before EC encoding to ensure the .vif reflects the same .dat state that .ecx was generated from. Add TestEcConsistency_WritesBetweenEncodeAndEcx that reproduces the race condition by appending data between EC encoding and .ecx generation. * fix: pass actual offset to ReadBytes, improve test quality - Pass offset.ToActualOffset() to ReadBytes instead of 0 to preserve correct error metrics and error messages within ReadBytes - Handle Stat() error in assembleFromIntervalsAllowError - Rename TestEcConsistency_DatFileGrowsDuringEncoding to TestEcConsistency_ExactLargeRowEncoding (test verifies fixed-size encoding, not concurrent growth) - Update test comment to clarify it reproduces the old buggy sequence - Fix verification loop to advance by readSize for full data coverage * fix(ec): add dat/idx consistency check in worker EC encoding The erasure_coding worker copies .dat and .idx as separate network transfers. If a write lands on the source between these copies, the .idx may have entries pointing past the end of .dat, leading to EC volumes with .ecx entries that reference non-existent shard data. Add verifyDatIdxConsistency() that walks the .idx and verifies no entry's offset+size exceeds the .dat file size. This fails the EC task early with a clear error instead of silently producing corrupt EC volumes. * test(ec): add integration test verifying .ecx/.ecd consistency TestEcIndexConsistencyAfterEncode uploads multiple needles of varying sizes (14B to 256KB), EC-encodes the volume, mounts data shards, then reads every needle back via the EC read path and verifies payload correctness. This catches any inconsistency between .ecx index entries and EC shard data. * fix(test): account for needle overhead in test volume fixture WriteTestVolumeFiles created a .dat of exactly datSize bytes but the .idx entry claimed a needle of that same size. GetActualSize adds header + checksum + timestamp overhead, so the consistency check correctly rejects this as the needle extends past the .dat file. Fix by sizing the .dat to GetActualSize(datSize) so the .idx entry is consistent with the .dat contents. * fix(test): remove flaky shard ID assertion in EC scrub test When shard 0 is truncated on disk after mount, the volume server may detect corruption via parity mismatches (shards 10-13) rather than a direct read failure on shard 0, depending on OS caching/mmap behavior. Replace the brittle shard-0-specific check with a volume ID validation. * fix(test): close upload response bodies and tighten file count assertion Wrap UploadBytes calls with ReadAllAndClose to prevent connection/fd leaks during test execution. Also tighten TotalFiles check from >= 1 to == 1 since ecSetup uploads exactly one file. |
||
|
Chris LuandCopilot
|
af68449a26 |
Process .ecj deletions during EC decode and vacuum decoded volume (#8863)
* Process .ecj deletions during EC decode and vacuum decoded volume (#8798) When decoding EC volumes back to normal volumes, deletions recorded in the .ecj journal were not being applied before computing the dat file size or checking for live needles. This caused the decoded volume to include data for deleted files and could produce false positives in the all-deleted check. - Call RebuildEcxFile before HasLiveNeedles/FindDatFileSize in VolumeEcShardsToVolume so .ecj deletions are merged into .ecx first - Vacuum the decoded volume after mounting in ec.decode to compact out deleted needle data from the .dat file - Add integration tests for decoding with non-empty .ecj files * storage: add offline volume compaction helper Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * ec: compact decoded volumes before deleting shards Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> * ec: address PR review comments - Fall back to data directory for .ecx when idx directory lacks it - Make compaction failure non-fatal during EC decode - Remove misleading "buffer: 10%" from space check error message * ec: collect .ecj from all shard locations during decode Each server's .ecj only contains deletions for needles whose data resides in shards held by that server. Previously, sources with no new data shards to contribute were skipped entirely, losing their .ecj deletion entries. Now .ecj is always appended from every shard location so RebuildEcxFile sees the full set of deletions. * ec: add integration tests for .ecj collection during decode TestEcDecodePreservesDeletedNeedles: verifies that needles deleted via VolumeEcBlobDelete are excluded from the decoded volume. TestEcDecodeCollectsEcjFromPeer: regression test for the fix in collectEcShards. Deletes a needle only on a peer server that holds no new data shards, then verifies the deletion survives decode via .ecj collection. * ec: address review nits in decode and tests - Remove double error wrapping in mountDecodedVolume - Check VolumeUnmount error in peer ecj test - Assert 404 specifically for deleted needles, fail on 5xx --------- Co-authored-by: Copilot <223556219+Copilot@users.noreply.github.com> |
||
|
Chris Lu
|
c4d642b8aa |
fix(ec): gather shards from all disk locations before rebuild (#8633)
* fix(ec): gather shards from all disk locations before rebuild (#8631)
Fix "too few shards given" error during ec.rebuild on multi-disk volume
servers. The root cause has two parts:
1. VolumeEcShardsRebuild only looked at a single disk location for shard
files. On multi-disk servers, the existing local shards could be on one
disk while copied shards were placed on another, causing the rebuild to
see fewer shards than actually available.
2. VolumeEcShardsCopy had a DiskId condition (req.DiskId == 0 &&
len(vs.store.Locations) > 0) that was always true, making the
FindFreeLocation fallback dead code. This meant copies always went to
Locations[0] regardless of where existing shards were.
Changes:
- VolumeEcShardsRebuild now finds the location with the most shards,
then gathers shard files from other locations via hard links (or
symlinks for cross-device) before rebuilding. Gathered files are
cleaned up after rebuild.
- VolumeEcShardsCopy now only uses Locations[DiskId] when DiskId > 0
(explicitly set). Otherwise, it prefers the location that already has
the EC volume, falling back to HDD then any free location.
- generateMissingEcFiles now logs shard counts and provides a clear
error message when not enough shards are found, instead of passing
through to the opaque reedsolomon "too few shards given" error.
* fix(ec): update test to match skip behavior for unrepairable volumes
The test expected an error for volumes with insufficient shards, but
commit
|
||
|
Chris Lu
|
af4c3fcb31 |
ec: fall back to data dir when ecx file not found in idx dir (#8541)
* ec: fall back to data dir when ecx file not found in idx dir (#8540) When -dir.idx is configured after EC encoding, the .ecx/.ecj files remain in the data directory. NewEcVolume now falls back to the data directory when the index file is not found in dirIdx. * ec: add fallback logging and improved error message for ecx lookup * ec: preserve configured dirIdx, track actual ecx location separately The previous fallback set ev.dirIdx = dir when finding .ecx in the data directory, which corrupted IndexBaseFileName() for future writes (e.g., WriteIdxFileFromEcIndex during EC-to-volume conversion would write the .idx file to the data directory instead of the configured index directory). Introduce ecxActualDir to track where .ecx/.ecj were actually found, used only by FileName() for cleanup/destroy. IndexBaseFileName() continues to use the configured dirIdx for new file creation. * ec: check both idx and data dirs for .ecx in all cleanup and lookup paths When -dir.idx is configured after EC encoding, .ecx/.ecj files may reside in the data directory. Several code paths only checked l.IdxDirectory, causing them to miss these files: - removeEcVolumeFiles: now removes .ecx/.ecj from both directories - loadExistingVolume: ecx existence check falls back to data dir - deleteEcShardIdsForEachLocation: ecx existence check and cleanup both cover the data directory - VolumeEcShardsRebuild: ecx lookup falls back to data directory so RebuildEcxFile operates on the correct file |
||
|
Chris Lu
|
839028b2e0 |
Fix EC rebuild shard detection (#8265)
Fix EC rebuild shard counting |
||
|
Lisandro Pin
|
1a5679a5eb |
Implement a VolumeEcStatus() RPC for volume servers. (#8006)
Just like `VolumeStatus()`, this call allows inspecting details for a given EC volume - including number of files and their total size. |
||
|
Lisandro Pin
|
ff5a8f0579 |
Implement RPC skeleton for regular/EC volumes scrubbing. (#8187)
* Implement RPC skeleton for regular/EC volumes scrubbing. See https://github.com/seaweedfs/seaweedfs/issues/8018 for details. * Minor proto improvements for `ScrubVolume()`, `ScrubEcVolume()`: - Add fields for scrubbing details in `ScrubVolumeResponse` and `ScrubEcVolumeResponse`, instead of reporting these through RPC errors. - Return a list of broken shards when scrubbing EC volumes, via `EcShardInfo'. |
||
|
Lisandro Pin
|
9638d37fe2 |
Block RPC write operations on volume servers when maintenance mode is enabled (#8115)
* Boostrap persistent state for volume servers. This PR implements logic load/save persistent state information for storages associated with volume servers, and reporting state changes back to masters via heartbeat messages. More work ensues! See https://github.com/seaweedfs/seaweedfs/issues/7977 for details. * Block RPC operations writing to volume servers when maintenance mode is on. |
||
|
Lisandro Pin
|
6b98b52acc |
Fix reporting of EC shard sizes from nodes to masters. (#7835)
SeaweedFS tracks EC shard sizes on topology data stuctures, but this information is never
relayed to master servers :( The end result is that commands reporting disk usage, such
as `volume.list` and `cluster.status`, yield incorrect figures when EC shards are present.
As an example for a simple 5-node test cluster, before...
```
> volume.list
Topology volumeSizeLimit:30000 MB hdd(volume:6/40 active:6 free:33 remote:0)
DataCenter DefaultDataCenter hdd(volume:6/40 active:6 free:33 remote:0)
Rack DefaultRack hdd(volume:6/40 active:6 free:33 remote:0)
DataNode 192.168.10.111:9001 hdd(volume:1/8 active:1 free:7 remote:0)
Disk hdd(volume:1/8 active:1 free:7 remote:0) id:0
volume id:3 size:88967096 file_count:172 replica_placement:2 version:3 modified_at_second:1766349617
ec volume id:1 collection: shards:[1 5]
Disk hdd total size:88967096 file_count:172
DataNode 192.168.10.111:9001 total size:88967096 file_count:172
DataCenter DefaultDataCenter hdd(volume:6/40 active:6 free:33 remote:0)
Rack DefaultRack hdd(volume:6/40 active:6 free:33 remote:0)
DataNode 192.168.10.111:9002 hdd(volume:2/8 active:2 free:6 remote:0)
Disk hdd(volume:2/8 active:2 free:6 remote:0) id:0
volume id:2 size:77267536 file_count:166 replica_placement:2 version:3 modified_at_second:1766349617
volume id:3 size:88967096 file_count:172 replica_placement:2 version:3 modified_at_second:1766349617
ec volume id:1 collection: shards:[0 4]
Disk hdd total size:166234632 file_count:338
DataNode 192.168.10.111:9002 total size:166234632 file_count:338
DataCenter DefaultDataCenter hdd(volume:6/40 active:6 free:33 remote:0)
Rack DefaultRack hdd(volume:6/40 active:6 free:33 remote:0)
DataNode 192.168.10.111:9003 hdd(volume:1/8 active:1 free:7 remote:0)
Disk hdd(volume:1/8 active:1 free:7 remote:0) id:0
volume id:2 size:77267536 file_count:166 replica_placement:2 version:3 modified_at_second:1766349617
ec volume id:1 collection: shards:[2 6]
Disk hdd total size:77267536 file_count:166
DataNode 192.168.10.111:9003 total size:77267536 file_count:166
DataCenter DefaultDataCenter hdd(volume:6/40 active:6 free:33 remote:0)
Rack DefaultRack hdd(volume:6/40 active:6 free:33 remote:0)
DataNode 192.168.10.111:9004 hdd(volume:2/8 active:2 free:6 remote:0)
Disk hdd(volume:2/8 active:2 free:6 remote:0) id:0
volume id:2 size:77267536 file_count:166 replica_placement:2 version:3 modified_at_second:1766349617
volume id:3 size:88967096 file_count:172 replica_placement:2 version:3 modified_at_second:1766349617
ec volume id:1 collection: shards:[3 7]
Disk hdd total size:166234632 file_count:338
DataNode 192.168.10.111:9004 total size:166234632 file_count:338
DataCenter DefaultDataCenter hdd(volume:6/40 active:6 free:33 remote:0)
Rack DefaultRack hdd(volume:6/40 active:6 free:33 remote:0)
DataNode 192.168.10.111:9005 hdd(volume:0/8 active:0 free:8 remote:0)
Disk hdd(volume:0/8 active:0 free:8 remote:0) id:0
ec volume id:1 collection: shards:[8 9 10 11 12 13]
Disk hdd total size:0 file_count:0
Rack DefaultRack total size:498703896 file_count:1014
DataCenter DefaultDataCenter total size:498703896 file_count:1014
total size:498703896 file_count:1014
```
...and after:
```
> volume.list
Topology volumeSizeLimit:30000 MB hdd(volume:6/40 active:6 free:33 remote:0)
DataCenter DefaultDataCenter hdd(volume:6/40 active:6 free:33 remote:0)
Rack DefaultRack hdd(volume:6/40 active:6 free:33 remote:0)
DataNode 192.168.10.111:9001 hdd(volume:1/8 active:1 free:7 remote:0)
Disk hdd(volume:1/8 active:1 free:7 remote:0) id:0
volume id:2 size:81761800 file_count:161 replica_placement:2 version:3 modified_at_second:1766349495
ec volume id:1 collection: shards:[1 5 9] sizes:[1:8.00 MiB 5:8.00 MiB 9:8.00 MiB] total:24.00 MiB
Disk hdd total size:81761800 file_count:161
DataNode 192.168.10.111:9001 total size:81761800 file_count:161
DataCenter DefaultDataCenter hdd(volume:6/40 active:6 free:33 remote:0)
Rack DefaultRack hdd(volume:6/40 active:6 free:33 remote:0)
DataNode 192.168.10.111:9002 hdd(volume:1/8 active:1 free:7 remote:0)
Disk hdd(volume:1/8 active:1 free:7 remote:0) id:0
volume id:3 size:88678712 file_count:170 replica_placement:2 version:3 modified_at_second:1766349495
ec volume id:1 collection: shards:[11 12 13] sizes:[11:8.00 MiB 12:8.00 MiB 13:8.00 MiB] total:24.00 MiB
Disk hdd total size:88678712 file_count:170
DataNode 192.168.10.111:9002 total size:88678712 file_count:170
DataCenter DefaultDataCenter hdd(volume:6/40 active:6 free:33 remote:0)
Rack DefaultRack hdd(volume:6/40 active:6 free:33 remote:0)
DataNode 192.168.10.111:9003 hdd(volume:2/8 active:2 free:6 remote:0)
Disk hdd(volume:2/8 active:2 free:6 remote:0) id:0
volume id:2 size:81761800 file_count:161 replica_placement:2 version:3 modified_at_second:1766349495
volume id:3 size:88678712 file_count:170 replica_placement:2 version:3 modified_at_second:1766349495
ec volume id:1 collection: shards:[0 4 8] sizes:[0:8.00 MiB 4:8.00 MiB 8:8.00 MiB] total:24.00 MiB
Disk hdd total size:170440512 file_count:331
DataNode 192.168.10.111:9003 total size:170440512 file_count:331
DataCenter DefaultDataCenter hdd(volume:6/40 active:6 free:33 remote:0)
Rack DefaultRack hdd(volume:6/40 active:6 free:33 remote:0)
DataNode 192.168.10.111:9004 hdd(volume:2/8 active:2 free:6 remote:0)
Disk hdd(volume:2/8 active:2 free:6 remote:0) id:0
volume id:2 size:81761800 file_count:161 replica_placement:2 version:3 modified_at_second:1766349495
volume id:3 size:88678712 file_count:170 replica_placement:2 version:3 modified_at_second:1766349495
ec volume id:1 collection: shards:[2 6 10] sizes:[2:8.00 MiB 6:8.00 MiB 10:8.00 MiB] total:24.00 MiB
Disk hdd total size:170440512 file_count:331
DataNode 192.168.10.111:9004 total size:170440512 file_count:331
DataCenter DefaultDataCenter hdd(volume:6/40 active:6 free:33 remote:0)
Rack DefaultRack hdd(volume:6/40 active:6 free:33 remote:0)
DataNode 192.168.10.111:9005 hdd(volume:0/8 active:0 free:8 remote:0)
Disk hdd(volume:0/8 active:0 free:8 remote:0) id:0
ec volume id:1 collection: shards:[3 7] sizes:[3:8.00 MiB 7:8.00 MiB] total:16.00 MiB
Disk hdd total size:0 file_count:0
Rack DefaultRack total size:511321536 file_count:993
DataCenter DefaultDataCenter total size:511321536 file_count:993
total size:511321536 file_count:993
```
|
||
|
Chris Lu
|
7ed7578424 |
fix(ec.decode): purge EC shards when volume is empty (#7749)
* fix(ec.decode): purge EC shards when volume is empty When an EC volume has no live entries (all deleted), ec.decode should not generate an empty normal volume. Instead, treat decode as a no-op and allow shard purge to proceed cleanly.\n\nFixes: #7748 * chore: address PR review comments * test: cover live EC index + avoid magic string * chore: harden empty-EC handling - Make shard cleanup best-effort (collect errors)\n- Remove unreachable EOF handling in HasLiveNeedles\n- Add empty ecx test case\n- Share no-live-entries substring between server/client\n * perf: parallelize EC shard unmount/delete across locations * refactor: combine unmount+delete into single goroutine per location * refactor: use errors.Join for multi-error aggregation * refactor: use existing ErrorWaitGroup for parallel execution * fix: capture loop variables + clarify SuperBlockSize safety |
||
|
Chris Lu
|
208d7f24f4 |
Erasure Coding: Ec refactoring (#7396)
* refactor: add ECContext structure to encapsulate EC parameters
- Create ec_context.go with ECContext struct
- NewDefaultECContext() creates context with default 10+4 configuration
- Helper methods: CreateEncoder(), ToExt(), String()
- Foundation for cleaner function signatures
- No behavior change, still uses hardcoded 10+4
* refactor: update ec_encoder.go to use ECContext
- Add WriteEcFilesWithContext() and RebuildEcFilesWithContext() functions
- Keep old functions for backward compatibility (call new versions)
- Update all internal functions to accept ECContext parameter
- Use ctx.DataShards, ctx.ParityShards, ctx.TotalShards consistently
- Use ctx.CreateEncoder() instead of hardcoded reedsolomon.New()
- Use ctx.ToExt() for shard file extensions
- No behavior change, still uses default 10+4 configuration
* refactor: update ec_volume.go to use ECContext
- Add ECContext field to EcVolume struct
- Initialize ECContext with default configuration in NewEcVolume()
- Update LocateEcShardNeedleInterval() to use ECContext.DataShards
- Phase 1: Always uses default 10+4 configuration
- No behavior change
* refactor: add EC shard count fields to VolumeInfo protobuf
- Add data_shards_count field (field 8) to VolumeInfo message
- Add parity_shards_count field (field 9) to VolumeInfo message
- Fields are optional, 0 means use default (10+4)
- Backward compatible: fields added at end
- Phase 1: Foundation for future customization
* refactor: regenerate protobuf Go files with EC shard count fields
- Regenerated volume_server_pb/*.go with new EC fields
- DataShardsCount and ParityShardsCount accessors added to VolumeInfo
- No behavior change, fields not yet used
* refactor: update VolumeEcShardsGenerate to use ECContext
- Create ECContext with default configuration in VolumeEcShardsGenerate
- Use ecCtx.TotalShards and ecCtx.ToExt() in cleanup
- Call WriteEcFilesWithContext() instead of WriteEcFiles()
- Save EC configuration (DataShardsCount, ParityShardsCount) to VolumeInfo
- Log EC context being used
- Phase 1: Always uses default 10+4 configuration
- No behavior change
* fmt
* refactor: update ec_test.go to use ECContext
- Update TestEncodingDecoding to create and use ECContext
- Update validateFiles() to accept ECContext parameter
- Update removeGeneratedFiles() to use ctx.TotalShards and ctx.ToExt()
- Test passes with default 10+4 configuration
* refactor: use EcShardConfig message instead of separate fields
* optimize: pre-calculate row sizes in EC encoding loop
* refactor: replace TotalShards field with Total() method
- Remove TotalShards field from ECContext to avoid field drift
- Add Total() method that computes DataShards + ParityShards
- Update all references to use ctx.Total() instead of ctx.TotalShards
- Read EC config from VolumeInfo when loading EC volumes
- Read data shard count from .vif in VolumeEcShardsToVolume
- Use >= instead of > for exact boundary handling in encoding loops
* optimize: simplify VolumeEcShardsToVolume to use existing EC context
- Remove redundant CollectEcShards call
- Remove redundant .vif file loading
- Use v.ECContext.DataShards directly (already loaded by NewEcVolume)
- Slice tempShards instead of collecting again
* refactor: rename MaxShardId to MaxShardCount for clarity
- Change from MaxShardId=31 to MaxShardCount=32
- Eliminates confusing +1 arithmetic (MaxShardId+1)
- More intuitive: MaxShardCount directly represents the limit
fix: support custom EC ratios beyond 14 shards in VolumeEcShardsToVolume
- Add MaxShardId constant (31, since ShardBits is uint32)
- Use MaxShardId+1 (32) instead of TotalShardsCount (14) for tempShards buffer
- Prevents panic when slicing for volumes with >14 total shards
- Critical fix for custom EC configurations like 20+10
* fix: add validation for EC shard counts from VolumeInfo
- Validate DataShards/ParityShards are positive and within MaxShardCount
- Prevent zero or invalid values that could cause divide-by-zero
- Fallback to defaults if validation fails, with warning log
- VolumeEcShardsGenerate now preserves existing EC config when regenerating
- Critical safety fix for corrupted or legacy .vif files
* fix: RebuildEcFiles now loads EC config from .vif file
- Critical: RebuildEcFiles was always using default 10+4 config
- Now loads actual EC config from .vif file when rebuilding shards
- Validates config before use (positive shards, within MaxShardCount)
- Falls back to default if .vif missing or invalid
- Prevents data corruption when rebuilding custom EC volumes
* add: defensive validation for dataShards in VolumeEcShardsToVolume
- Validate dataShards > 0 and <= MaxShardCount before use
- Prevents panic from corrupted or uninitialized ECContext
- Returns clear error message instead of panic
- Defense-in-depth: validates even though upstream should catch issues
* fix: replace TotalShardsCount with MaxShardCount for custom EC ratio support
Critical fixes to support custom EC ratios > 14 shards:
disk_location_ec.go:
- validateEcVolume: Check shards 0-31 instead of 0-13 during validation
- removeEcVolumeFiles: Remove shards 0-31 instead of 0-13 during cleanup
ec_volume_info.go ShardBits methods:
- ShardIds(): Iterate up to MaxShardCount (32) instead of TotalShardsCount (14)
- ToUint32Slice(): Iterate up to MaxShardCount (32)
- IndexToShardId(): Iterate up to MaxShardCount (32)
- MinusParityShards(): Remove shards 10-31 instead of 10-13 (added note about Phase 2)
- Minus() shard size copy: Iterate up to MaxShardCount (32)
- resizeShardSizes(): Iterate up to MaxShardCount (32)
Without these changes:
- Custom EC ratios > 14 total shards would fail validation on startup
- Shards 14-31 would never be discovered or cleaned up
- ShardBits operations would miss shards >= 14
These changes are backward compatible - MaxShardCount (32) includes
the default TotalShardsCount (14), so existing 10+4 volumes work as before.
* fix: replace TotalShardsCount with MaxShardCount in critical data structures
Critical fixes for buffer allocations and loops that must support
custom EC ratios up to 32 shards:
Data Structures:
- store_ec.go:354: Buffer allocation for shard recovery (bufs array)
- topology_ec.go:14: EcShardLocations.Locations fixed array size
- command_ec_rebuild.go:268: EC shard map allocation
- command_ec_common.go:626: Shard-to-locations map allocation
Shard Discovery Loops:
- ec_task.go:378: Loop to find generated shard files
- ec_shard_management.go: All 8 loops that check/count EC shards
These changes are critical because:
1. Buffer allocations sized to 14 would cause index-out-of-bounds panics
when accessing shards 14-31
2. Fixed arrays sized to 14 would truncate shard location data
3. Loops limited to 0-13 would never discover/manage shards 14-31
Note: command_ec_encode.go:208 intentionally NOT changed - it creates
shard IDs to mount after encoding. In Phase 1 we always generate 14
shards, so this remains TotalShardsCount and will be made dynamic in
Phase 2 based on actual EC context.
Without these fixes, custom EC ratios > 14 total shards would cause:
- Runtime panics (array index out of bounds)
- Data loss (shards 14-31 never discovered/tracked)
- Incomplete shard management (missing shards not detected)
* refactor: move MaxShardCount constant to ec_encoder.go
Moved MaxShardCount from ec_volume_info.go to ec_encoder.go to group it
with other shard count constants (DataShardsCount, ParityShardsCount,
TotalShardsCount). This improves code organization and makes it easier
to understand the relationship between these constants.
Location: ec_encoder.go line 22, between TotalShardsCount and MinTotalDisks
* improve: add defensive programming and better error messages for EC
Code review improvements from CodeRabbit:
1. ShardBits Guardrails (ec_volume_info.go):
- AddShardId, RemoveShardId: Reject shard IDs >= MaxShardCount
- HasShardId: Return false for out-of-range shard IDs
- Prevents silent no-ops from bit shifts with invalid IDs
2. Future-Proof Regex (disk_location_ec.go):
- Updated regex from \.ec[0-9][0-9] to \.ec\d{2,3}
- Now matches .ec00 through .ec999 (currently .ec00-.ec31 used)
- Supports future increases to MaxShardCount beyond 99
3. Better Error Messages (volume_grpc_erasure_coding.go):
- Include valid range (1..32) in dataShards validation error
- Helps operators quickly identify the problem
4. Validation Before Save (volume_grpc_erasure_coding.go):
- Validate ECContext (DataShards > 0, ParityShards > 0, Total <= MaxShardCount)
- Log EC config being saved to .vif for debugging
- Prevents writing invalid configs to disk
These changes improve robustness and debuggability without changing
core functionality.
* fmt
* fix: critical bugs from code review + clean up comments
Critical bug fixes:
1. command_ec_rebuild.go: Fixed indentation causing compilation error
- Properly nested if/for blocks in registerEcNode
2. ec_shard_management.go: Fixed isComplete logic incorrectly using MaxShardCount
- Changed from MaxShardCount (32) back to TotalShardsCount (14)
- Default 10+4 volumes were being incorrectly reported as incomplete
- Missing shards 14-31 were being incorrectly reported as missing
- Fixed in 4 locations: volume completeness checks and getMissingShards
3. ec_volume_info.go: Fixed MinusParityShards removing too many shards
- Changed from MaxShardCount (32) back to TotalShardsCount (14)
- Was incorrectly removing shard IDs 10-31 instead of just 10-13
Comment cleanup:
- Removed Phase 1/Phase 2 references (development plan context)
- Replaced with clear statements about default 10+4 configuration
- SeaweedFS repo uses fixed 10+4 EC ratio, no phases needed
Root cause: Over-aggressive replacement of TotalShardsCount with MaxShardCount.
MaxShardCount (32) is the limit for buffer allocations and shard ID loops,
but TotalShardsCount (14) must be used for default EC configuration logic.
* fix: add defensive bounds checks and compute actual shard counts
Critical fixes from code review:
1. topology_ec.go: Add defensive bounds checks to AddShard/DeleteShard
- Prevent panic when shardId >= MaxShardCount (32)
- Return false instead of crashing on out-of-range shard IDs
2. command_ec_common.go: Fix doBalanceEcShardsAcrossRacks
- Was using hardcoded TotalShardsCount (14) for all volumes
- Now computes actual totalShardsForVolume from rackToShardCount
- Fixes incorrect rebalancing for volumes with custom EC ratios
- Example: 5+2=7 shards would incorrectly use 14 as average
These fixes improve robustness and prepare for future custom EC ratios
without changing current behavior for default 10+4 volumes.
Note: MinusParityShards and ec_task.go intentionally NOT changed for
seaweedfs repo - these will be enhanced in seaweed-enterprise repo
where custom EC ratio configuration is added.
* fmt
* style: make MaxShardCount type casting explicit in loops
Improved code clarity by explicitly casting MaxShardCount to the
appropriate type when used in loop comparisons:
- ShardId comparisons: Cast to ShardId(MaxShardCount)
- uint32 comparisons: Cast to uint32(MaxShardCount)
Changed in 5 locations:
- Minus() loop (line 90)
- ShardIds() loop (line 143)
- ToUint32Slice() loop (line 152)
- IndexToShardId() loop (line 219)
- resizeShardSizes() loop (line 248)
This makes the intent explicit and improves type safety readability.
No functional changes - purely a style improvement.
|
||
|
Chris LuandCopilot
|
b4d9618efc |
volume server UI: fix ec volume ui (#7104)
* fix ec volume ui * Update weed/storage/erasure_coding/ec_volume.go Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> --------- Co-authored-by: Copilot <175728472+Copilot@users.noreply.github.com> |
||
|
Chris Luandgemini-code-assist[bot]
|
891a2fb6eb |
Admin: misc improvements on admin server and workers. EC now works. (#7055)
* initial design * added simulation as tests * reorganized the codebase to move the simulation framework and tests into their own dedicated package * integration test. ec worker task * remove "enhanced" reference * start master, volume servers, filer Current Status ✅ Master: Healthy and running (port 9333) ✅ Filer: Healthy and running (port 8888) ✅ Volume Servers: All 6 servers running (ports 8080-8085) 🔄 Admin/Workers: Will start when dependencies are ready * generate write load * tasks are assigned * admin start wtih grpc port. worker has its own working directory * Update .gitignore * working worker and admin. Task detection is not working yet. * compiles, detection uses volumeSizeLimitMB from master * compiles * worker retries connecting to admin * build and restart * rendering pending tasks * skip task ID column * sticky worker id * test canScheduleTaskNow * worker reconnect to admin * clean up logs * worker register itself first * worker can run ec work and report status but: 1. one volume should not be repeatedly worked on. 2. ec shards needs to be distributed and source data should be deleted. * move ec task logic * listing ec shards * local copy, ec. Need to distribute. * ec is mostly working now * distribution of ec shards needs improvement * need configuration to enable ec * show ec volumes * interval field UI component * rename * integration test with vauuming * garbage percentage threshold * fix warning * display ec shard sizes * fix ec volumes list * Update ui.go * show default values * ensure correct default value * MaintenanceConfig use ConfigField * use schema defined defaults * config * reduce duplication * refactor to use BaseUIProvider * each task register its schema * checkECEncodingCandidate use ecDetector * use vacuumDetector * use volumeSizeLimitMB * remove remove * remove unused * refactor * use new framework * remove v2 reference * refactor * left menu can scroll now * The maintenance manager was not being initialized when no data directory was configured for persistent storage. * saving config * Update task_config_schema_templ.go * enable/disable tasks * protobuf encoded task configurations * fix system settings * use ui component * remove logs * interface{} Reduction * reduce interface{} * reduce interface{} * avoid from/to map * reduce interface{} * refactor * keep it DRY * added logging * debug messages * debug level * debug * show the log caller line * use configured task policy * log level * handle admin heartbeat response * Update worker.go * fix EC rack and dc count * Report task status to admin server * fix task logging, simplify interface checking, use erasure_coding constants * factor in empty volume server during task planning * volume.list adds disk id * track disk id also * fix locking scheduled and manual scanning * add active topology * simplify task detector * ec task completed, but shards are not showing up * implement ec in ec_typed.go * adjust log level * dedup * implementing ec copying shards and only ecx files * use disk id when distributing ec shards 🎯 Planning: ActiveTopology creates DestinationPlan with specific TargetDisk 📦 Task Creation: maintenance_integration.go creates ECDestination with DiskId 🚀 Task Execution: EC task passes DiskId in VolumeEcShardsCopyRequest 💾 Volume Server: Receives disk_id and stores shards on specific disk (vs.store.Locations[req.DiskId]) 📂 File System: EC shards and metadata land in the exact disk directory planned * Delete original volume from all locations * clean up existing shard locations * local encoding and distributing * Update docker/admin_integration/EC-TESTING-README.md Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> * check volume id range * simplify * fix tests * fix types * clean up logs and tests --------- Co-authored-by: gemini-code-assist[bot] <176961590+gemini-code-assist[bot]@users.noreply.github.com> |
||
|
Chris Lu
|
69553e5ba6 | convert error fromating to %w everywhere (#6995) | ||
|
chrislu
|
ae5bd0667a |
rename proto field from DestroyTime to expire_at_sec
For TTL volume converted into EC volume, this change may leave the volumes staying. |
||
|
coffeecloudgit
|
dad3a26fb6 | Update volume_grpc_erasure_coding.go , fix no space left bug (#6077) | ||
|
coffeecloudgit
|
6cbce110d5 | Update volume_grpc_erasure_coding.go (#6073) | ||
|
chrislu
|
8d5a6d7e74 | fix for spreading ec shards | ||
|
chrislu
|
8e4bffc66b |
copy ec shards to disks already having ec volumes
fix https://github.com/seaweedfs/seaweedfs/issues/5615 |
||
|
augustazzandxuwenfeng
|
0b00706454 |
EC volume supports expiration and displays expiration message when executing volume.list (#5895)
* ec volume expire * volume.list show DestroyTime * comments * code optimization --------- Co-authored-by: xuwenfeng <xuwenfeng1@zto.com> |
||
|
chrislu
|
fdf7193ae7 | rename | ||
|
chrislu
|
07f4998188 | add dat file size into vif for EC | ||
|
wusongandWusong Wang
|
a408b46d95 |
compilation fail (#4414)
Signed-off-by: Wusong Wang <wangwusong@virtaitech.com> Co-authored-by: Wusong Wang <wangwusong@virtaitech.com> |
||
|
chrislu
|
0a22eea55d |
collect ec shard from multiple locations
fix https://github.com/seaweedfs/seaweedfs/issues/4365 |
||
|
chrislu
|
ae9388723f | adjust error message | ||
|
chrislu
|
f4b52d4c52 | fix format | ||
|
chrislu
|
2762154130 | fix compilation | ||
|
chrislu
|
fb5808e0c3 | EC: with multiple volume locations, the ec rebuilding may fail | ||
|
chrislu
|
5790d01c6f |
EC: after ec encoding, the source ec shards may fail to purge if the volume server has multiple disk locations
related to https://github.com/seaweedfs/seaweedfs/issues/3459 |
||
|
chrislu
|
26dbc6c905 | move to https://github.com/seaweedfs/seaweedfs | ||
|
chrislu
|
9f9ef1340c |
use streaming mode for long poll grpc calls
streaming mode would create separate grpc connections for each call. this is to ensure the long poll connections are properly closed. |
||
|
Chris Lu
|
5435027ff0 |
volume copy: stream out copying progress and avoid grpc request timeout
fix https://github.com/chrislusf/seaweedfs/issues/2386 |
||
|
Eng Zer Jun
|
a23bcbb7ec |
refactor: move from io/ioutil to io and os package
The io/ioutil package has been deprecated as of Go 1.16, see https://golang.org/doc/go1.16#ioutil. This commit replaces the existing io/ioutil functions with their new definitions in io and os packages. Signed-off-by: Eng Zer Jun <engzerjun@gmail.com> |
||
|
Chris Lu
|
e5fc35ed0c | change server address from string to a type | ||
|
Chris Lu
|
a243d7e047 | EC: clean up if failed in the middle | ||
|
Chris Lu
|
d1a4e19a3f |
volume: copy file also copies modification time
to ensure ttl can work well |