seaweedfs/weed/topology/volume_layout.go

package topology

import (
	"context"
	"fmt"
	"math/rand/v2"
	"sync"
	"sync/atomic"
	"time"

	"github.com/seaweedfs/seaweedfs/weed/pb/master_pb"

	"github.com/seaweedfs/seaweedfs/weed/storage/types"

	"github.com/seaweedfs/seaweedfs/weed/glog"
	"github.com/seaweedfs/seaweedfs/weed/storage"
	"github.com/seaweedfs/seaweedfs/weed/storage/needle"
	"github.com/seaweedfs/seaweedfs/weed/storage/super_block"
)

type copyState int

const (
	noCopies copyState = 0 + iota
	insufficientCopies
	enoughCopies
)

type volumeState string

const (
	readOnlyState     volumeState = "ReadOnly"
	oversizedState                = "Oversized"
	crowdedState                  = "Crowded"
	NoWritableVolumes             = "No writable volumes"
)

// volumeSizeTracking holds per-volume size accounting for weighted assignment.
type volumeSizeTracking struct {
	effectiveSize   uint64    // reported + pending assigned bytes
	reportedSize    uint64    // last heartbeat-reported size (dedup replicas)
	compactRevision uint32    // detect compaction to reset instead of decay
	lastUpdateTime  time.Time // dedup replicas within the same heartbeat cycle
	fullSince       time.Time // non-zero while the volume is marked full (RecordAssign or capacity heartbeat)
}

// capacityRecoveryDelay is the minimum time a volume must stay out of the
// writable list after being removed for capacity before it can
// be considered for re-addition by heartbeat-driven decay. Combined with
// the effectiveSize hysteresis band, this avoids bouncing the volume in
// and out of writable within a single burst of assigns.
const capacityRecoveryDelay = 30 * time.Second

// mapping from volume to its locations, inverted from server to volume
type VolumeLayout struct {
	growRequest      atomic.Bool
	lastGrowCount    atomic.Uint32
	rp               *super_block.ReplicaPlacement
	ttl              *needle.TTL
	diskType         types.DiskType
	vid2location     map[needle.VolumeId]*VolumeLocationList
	writables        []needle.VolumeId // transient array of writable volume id
	crowded          map[needle.VolumeId]struct{}
	vacuumedVolumes  map[needle.VolumeId]time.Time
	volumeSizeLimit  uint64
	replicationAsMin bool
	accessLock       sync.RWMutex
	sizeTracking     map[needle.VolumeId]*volumeSizeTracking
	// dropped: the layout went away with its collection; late registrations must re-resolve.
	dropped bool
}

type VolumeLayoutStats struct {
	TotalSize uint64
	UsedSize  uint64
	// LogicalUsedSize counts one copy of the data: a single replica of a
	// regular volume, the data shards of an EC volume.
	LogicalUsedSize uint64
	FileCount       uint64
}

func NewVolumeLayout(rp *super_block.ReplicaPlacement, ttl *needle.TTL, diskType types.DiskType, volumeSizeLimit uint64, replicationAsMin bool) *VolumeLayout {
	return &VolumeLayout{
		rp:               rp,
		ttl:              ttl,
		diskType:         diskType,
		vid2location:     make(map[needle.VolumeId]*VolumeLocationList),
		writables:        *new([]needle.VolumeId),
		crowded:          make(map[needle.VolumeId]struct{}),
		vacuumedVolumes:  make(map[needle.VolumeId]time.Time),
		volumeSizeLimit:  volumeSizeLimit,
		replicationAsMin: replicationAsMin,
		sizeTracking:     make(map[needle.VolumeId]*volumeSizeTracking),
	}
}

func (vl *VolumeLayout) String() string {
	return fmt.Sprintf("rp:%v, ttl:%v, writables:%v, volumeSizeLimit:%v", vl.rp, vl.ttl, vl.writables, vl.volumeSizeLimit)
}

// getOrCreateLocationList returns the vid's location list, creating an empty one
// if the index has none. Callers hold accessLock.
func (vl *VolumeLayout) getOrCreateLocationList(vid needle.VolumeId) *VolumeLocationList {
	location, ok := vl.vid2location[vid]
	if !ok {
		location = NewVolumeLocationList()
		vl.vid2location[vid] = location
	}
	return location
}

// initSizeTracking seeds a vid's size tracking from a reported size if it has
// none yet. Callers hold accessLock.
func (vl *VolumeLayout) initSizeTracking(vid needle.VolumeId, size uint64, compactRevision uint32) {
	if _, exists := vl.sizeTracking[vid]; !exists {
		vl.sizeTracking[vid] = &volumeSizeTracking{
			effectiveSize:   size,
			reportedSize:    size,
			compactRevision: compactRevision,
		}
	}
}

// RegisterVolume records a volume location. It refuses a layout dropped with
// its collection — the caller must re-resolve, or the bits it sets would leak.
func (vl *VolumeLayout) RegisterVolume(v *storage.VolumeInfo, dn *DataNode) bool {
	vl.accessLock.Lock()
	defer vl.accessLock.Unlock()

	if vl.dropped {
		return false
	}

	moveLookupOwnership(v.Id, vl.getOrCreateLocationList(v.Id).Set(dn), dn)
	if !v.ReadOnly {
		vl.initSizeTracking(v.Id, v.Size, v.CompactRevision)
	}
	// glog.V(4).Infof("volume %d added to %s len %d copy %d", v.Id, dn.Id(), vl.vid2location[v.Id].Length(), v.ReplicaPlacement.GetCopyCount())
	location := vl.vid2location[v.Id]
	for _, dn := range location.list {
		if vInfo, err := dn.GetVolumesById(v.Id); err == nil {
			if vInfo.ReadOnly {
				glog.V(1).Infof("vid %d removed from writable", v.Id)
				vl.removeFromWritable(v.Id)
				location.SetReadOnly(dn, true)
				return true
			}
			location.SetReadOnly(dn, false)
		} else {
			glog.V(1).Infof("vid %d removed from writable", v.Id)
			vl.removeFromWritable(v.Id)
			location.SetReadOnly(dn, false)
			return true
		}
	}
	return true
}

func (vl *VolumeLayout) rememberOversizedVolume(v *storage.VolumeInfo, dn *DataNode) {
	if location, ok := vl.vid2location[v.Id]; ok {
		location.SetOversized(dn, vl.isOversized(v))
	}
}

// UpdateOversizedState refreshes the per-replica oversized mark from the size
// reported by this heartbeat, and is the only writer of that mark. The delta
// heartbeat path (ApplyVolumeChanges) and the full heartbeat path
// (SyncDataNodeRegistration) both call it, or a volume that grew past the
// limit would keep looking writable to ensureCorrectWritables and bounce
// between writable and unwritable on every assign.
//
// Registration deliberately does not touch the mark: the incremental path
// registers from a short heartbeat message that carries no size, so judging
// the volume by it would clear the mark on every arrival announcement and
// hand an oversized volume back to the writable list.
func (vl *VolumeLayout) UpdateOversizedState(v *storage.VolumeInfo, dn *DataNode) {
	vl.accessLock.Lock()
	defer vl.accessLock.Unlock()
	vl.rememberOversizedVolume(v, dn)
}

// UpdateVolumeSize is called on every heartbeat for every reported volume.
// It decays the pending size estimate toward the reported size and updates
// crowded state. Replicated volumes report from multiple DataNodes; decay
// runs only once per new reported size to avoid double-halving.
// If the compact revision changed, the size drop is from compaction (not
// pending writes), so we reset effectiveSize to the reported size instead of
// decaying.
//
// Returns recoveredToWritable = true when decay brought a volume that was
// previously eagerly removed by RecordAssign back under the writable
// threshold and this call re-added it to the writable list. The caller
// should mirror the activeVolumeCount bookkeeping.
//
// fromHeartbeat marks a volume server's report. The periodic decay stands in
// for the report a quiet volume never sends, so it passes no size of its own —
// it reads the record under this lock, and never advances lastUpdateTime, or
// it would swallow the next real report and strand the master on a stale size
// no one will send again. Both callers give way to a report already handled
// for this cycle.
func (vl *VolumeLayout) UpdateVolumeSize(vid needle.VolumeId, reportedSize uint64, compactRevision uint32, fromHeartbeat bool) (recoveredToWritable bool) {
	vl.accessLock.Lock()
	defer vl.accessLock.Unlock()

	// Tracking exists to place writes, and nothing is written to a volume any
	// replica reports read-only. Most volumes in a tiered cluster are read-only,
	// so an entry each is the layout's largest cost. Asked of the volume rather
	// than of the replica reporting, so which replica arrives first cannot
	// decide the answer. A volume held out of the writable list for capacity is
	// still all-writable and keeps its entry, which is what enforces the
	// recovery delay.
	if !vl.isAllWritable(vid) {
		delete(vl.sizeTracking, vid)
		vl.removeFromCrowded(vid)
		return false
	}

	now := time.Now()
	st := vl.sizeTracking[vid]
	if st == nil {
		if !fromHeartbeat {
			return false // the entry went while the decay was picking its work
		}
		st = &volumeSizeTracking{
			effectiveSize:   reportedSize,
			reportedSize:    reportedSize,
			compactRevision: compactRevision,
			lastUpdateTime:  now,
		}
		vl.sizeTracking[vid] = st
	} else if now.Sub(st.lastUpdateTime) < 2*time.Second {
		// Something already decayed this volume for this cycle: another replica
		// of the same report, or for the decay a heartbeat that arrived after
		// the pass chose the volume. Halving twice would forget pending bytes
		// the volume has not written yet.
		return false
	} else {
		if fromHeartbeat {
			st.lastUpdateTime = now
			st.reportedSize = reportedSize
		} else {
			// Take the record as it stands under this lock, not as the decay
			// pass saw it: a heartbeat may have landed since, and replaying
			// the older size would roll its report back.
			reportedSize, compactRevision = st.reportedSize, st.compactRevision
		}
		if compactRevision != st.compactRevision {
			// Compaction happened — size drop is real, not pending. Reset.
			st.compactRevision = compactRevision
			st.effectiveSize = reportedSize
		} else if st.effectiveSize > reportedSize {
			st.effectiveSize = reportedSize + (st.effectiveSize-reportedSize)/2
		} else {
			st.effectiveSize = reportedSize
		}
	}

	crowdedThreshold := uint64(float64(vl.volumeSizeLimit) * VolumeGrowStrategy.Threshold)
	if st.effectiveSize > crowdedThreshold {
		vl.setVolumeCrowded(vid)
		return false
	}
	vl.removeFromCrowded(vid)

	// Recovery path: if we eagerly removed this volume from writables in
	// RecordAssign, decay may now have brought effectiveSize back under
	// the crowded threshold. Re-add it — but only after the recovery
	// delay has elapsed, so a steady stream of assigns near the limit
	// does not bounce the volume in and out of writables.
	if st.fullSince.IsZero() {
		return false
	}
	if now.Sub(st.fullSince) < capacityRecoveryDelay {
		return false
	}
	if reportedSize >= vl.volumeSizeLimit {
		return false // actual on-disk size still over limit; stay out
	}
	if vl.vid2location[vid].AnyOversized() {
		return false
	}
	if !vl.enoughCopies(vid) || !vl.isAllWritable(vid) {
		return false
	}
	if !vl.setVolumeWritable(vid) {
		return false // already writable (shouldn't happen, but be safe)
	}
	st.fullSince = time.Time{}
	glog.V(0).Infof("Volume %d recovered to writable (effective=%d, reported=%d, limit=%d).",
		vid, st.effectiveSize, reportedSize, vl.volumeSizeLimit)
	return true
}

// DecayQuietVolumeSizes re-runs the size decay for volumes whose heartbeat
// reports have gone quiet. Only a volume whose content changed is reported,
// and a volume held out of the writable list takes no writes, so without this
// an inflated estimate is never decayed and the volume never returns.
//
// A volume the disk really did fill is skipped: UpdateVolumeSize refuses to
// recover one whose reported size is at the limit, so walking it every pulse
// only takes the write lock away from the heartbeats. Nothing is lost by
// waiting — shrinking it means compaction, which changes content and is
// therefore reported.
func (vl *VolumeLayout) DecayQuietVolumeSizes(quietCutoff time.Duration) {
	for _, vid := range vl.quietDecayCandidates(quietCutoff) {
		if vl.UpdateVolumeSize(vid, 0, 0, false) {
			vl.AdjustActiveVolumeCountAfterRecovery(vid)
		}
	}
}

// quietDecayCandidates names the volumes the decay has something to do for.
// Skipping the rest is what keeps the pass off the write lock: the work is
// what costs, not the outcome, since replaying a size that cannot move leaves
// the record exactly as it found it.
func (vl *VolumeLayout) quietDecayCandidates(quietCutoff time.Duration) (quiets []needle.VolumeId) {
	now := time.Now()
	vl.accessLock.RLock()
	defer vl.accessLock.RUnlock()
	for vid, st := range vl.sizeTracking {
		if now.Sub(st.lastUpdateTime) < quietCutoff {
			continue
		}
		if st.effectiveSize > st.reportedSize || (!st.fullSince.IsZero() && st.reportedSize < vl.volumeSizeLimit) {
			quiets = append(quiets, vid)
		}
	}
	return quiets
}

func (vl *VolumeLayout) UnRegisterVolume(v *storage.VolumeInfo, dn *DataNode) {
	vl.accessLock.Lock()
	defer vl.accessLock.Unlock()

	// remove from vid2location map
	location, ok := vl.vid2location[v.Id]
	if !ok {
		return
	}

	if removed := location.Remove(dn); removed != nil {
		moveLookupOwnership(v.Id, removed, nil)

		vl.ensureCorrectWritables(v.Id)

		if location.Length() == 0 {
			delete(vl.vid2location, v.Id)
			delete(vl.sizeTracking, v.Id)
			vl.removeFromCrowded(v.Id)
		}

	}
}

func (vl *VolumeLayout) EnsureCorrectWritables(v *storage.VolumeInfo) {
	vl.accessLock.Lock()
	defer vl.accessLock.Unlock()

	vl.ensureCorrectWritables(v.Id)
}

func (vl *VolumeLayout) ensureCorrectWritables(vid needle.VolumeId) {
	isEnoughCopies := vl.enoughCopies(vid)
	isAllWritable := vl.isAllWritable(vid)
	isOversizedVolume := vl.vid2location[vid].AnyOversized()
	if isEnoughCopies && isAllWritable && !isOversizedVolume {
		// A volume removed for capacity (fullSince set) must go through the
		// heartbeat recovery path in UpdateVolumeSize, which enforces
		// capacityRecoveryDelay. Re-adding it here would bypass the cooldown
		// and let a just-compacted volume flip back to writable immediately.
		if st := vl.sizeTracking[vid]; st != nil && !st.fullSince.IsZero() &&
			time.Since(st.fullSince) < capacityRecoveryDelay {
			return
		}
		// A volume already at the limit must not be restored here: the next
		// assign's RecordAssign would remove it again. Crowded is the wrong
		// test for that -- it starts at 90%, and a crowded volume that lost a
		// replica would never be writable again once the replica returned,
		// since nothing writes to it and its size can no longer fall.
		if st := vl.sizeTracking[vid]; st != nil && st.effectiveSize >= vl.volumeSizeLimit {
			return
		}
		vl.setVolumeWritable(vid)
		return
	}
	// removeFromWritable reports the transition itself, and only when there is
	// one. Explain it only then: every heartbeat re-runs this for every volume,
	// so a volume that is simply staying read-only must not log.
	if !vl.removeFromWritable(vid) {
		return
	}
	if !isEnoughCopies {
		glog.V(0).Infof("volume %d does not have enough copies", vid)
	}
	if !isAllWritable {
		glog.V(0).Infof("volume %d is not fully writable", vid)
	}
	if isOversizedVolume {
		glog.V(0).Infof("volume %d is oversized", vid)
	}
}

func (vl *VolumeLayout) isAllWritable(vid needle.VolumeId) bool {
	if location, ok := vl.vid2location[vid]; ok {
		for _, dn := range location.list {
			if v, getError := dn.GetVolumesById(vid); getError == nil {
				if v.ReadOnly {
					return false
				}
			}
		}
	} else {
		return false
	}

	return true
}

func (vl *VolumeLayout) isOversized(v *storage.VolumeInfo) bool {
	return uint64(v.Size) >= vl.volumeSizeLimit
}

// RecordAssign adds the estimated byte size to the volume's tracked effective
// size and updates the volume's writable state:
//
//   - at the crowded threshold (e.g. 90%): marks crowded to trigger growth.
//   - at the hard limit (100%): removes the volume from the writable list
//     immediately so new assigns stop landing on it. Returns true if this
//     call was what removed the volume, so the caller can mirror the
//     disk-usage accounting done by Topology.SetVolumeCapacityFull.
//
// Removing eagerly here avoids waiting for the heartbeat-driven
// CollectDeadNodeAndFullVolumes cycle (5–15s detection latency) during
// which a fast writer could push the volume far past the configured limit.
func (vl *VolumeLayout) RecordAssign(vid needle.VolumeId, pendingDelta int64) (reachedCapacity bool) {
	vl.accessLock.Lock()
	defer vl.accessLock.Unlock()

	st := vl.sizeTracking[vid]
	if st == nil {
		return false
	}
	if pendingDelta > 0 {
		st.effectiveSize += uint64(pendingDelta)
	}
	if st.effectiveSize >= vl.volumeSizeLimit {
		if vl.removeFromWritable(vid) {
			st.fullSince = time.Now()
			glog.V(0).Infof("Volume %d reaches full capacity (effective=%d, limit=%d).",
				vid, st.effectiveSize, vl.volumeSizeLimit)
			return true
		}
		return false
	}
	if float64(st.effectiveSize) > float64(vl.volumeSizeLimit)*VolumeGrowStrategy.Threshold {
		vl.setVolumeCrowded(vid)
	}
	return false
}

// AdjustActiveVolumeCountForFull decrements the active volume count on each
// data node holding this volume. Mirrors the accounting done in
// Topology.SetVolumeCapacityFull for the heartbeat-driven path. Call only
// after RecordAssign returns true for the same vid.
func (vl *VolumeLayout) AdjustActiveVolumeCountForFull(vid needle.VolumeId) {
	vl.adjustActiveVolumeCount(vid, -1)
}

// AdjustActiveVolumeCountAfterRecovery increments the active volume count on
// each data node holding this volume. Mirrors
// AdjustActiveVolumeCountForFull for the recovery path. Call only after
// UpdateVolumeSize returns true for the same vid.
func (vl *VolumeLayout) AdjustActiveVolumeCountAfterRecovery(vid needle.VolumeId) {
	vl.adjustActiveVolumeCount(vid, +1)
}

func (vl *VolumeLayout) adjustActiveVolumeCount(vid needle.VolumeId, delta int64) {
	// Copy the node list under the VolumeLayout lock, then release it before
	// calling UpAdjustDiskUsageDelta. UpAdjustDiskUsageDelta walks up the
	// topology tree taking per-level locks (e.g., DiskUsages.Lock on each
	// node). Keeping vl.accessLock held across that tree walk is an
	// unnecessary lock-ordering hazard — other call paths that hold a
	// topology-level lock and then need vl.accessLock would deadlock.
	vl.accessLock.RLock()
	vidLocations, found := vl.vid2location[vid]
	if !found {
		vl.accessLock.RUnlock()
		return
	}
	nodes := make([]*DataNode, len(vidLocations.list))
	copy(nodes, vidLocations.list)
	vl.accessLock.RUnlock()

	diskTypeStr := string(vl.diskType)
	for _, dn := range nodes {
		disk := dn.getOrCreateDisk(diskTypeStr)
		disk.UpAdjustDiskUsageDelta(vl.diskType, &DiskUsageCounts{
			activeVolumeCount: delta,
		})
	}
}

const maxDrainWait = 30 * time.Second
const pendingSizeThreshold uint64 = 2 * 1024 * 1024 // 2 MB

// GetPendingSize returns the estimated in-flight bytes for a volume:
// the gap between the effective tracked size and the last heartbeat-reported size.
func (vl *VolumeLayout) GetPendingSize(vid needle.VolumeId) uint64 {
	vl.accessLock.RLock()
	defer vl.accessLock.RUnlock()
	if st := vl.sizeTracking[vid]; st != nil && st.effectiveSize > st.reportedSize {
		return st.effectiveSize - st.reportedSize
	}
	return 0
}

// waitForPendingDrain polls until pending bytes for the volume decay below
// the threshold, the timeout expires, or the context is cancelled. Since the
// volume is already removed from the writable list, no new assigns accumulate
// — pending only decreases via heartbeat decay.
func (vl *VolumeLayout) waitForPendingDrain(ctx context.Context, vid needle.VolumeId) {
	deadline := time.Now().Add(maxDrainWait)
	for time.Now().Before(deadline) {
		if vl.GetPendingSize(vid) <= pendingSizeThreshold {
			return
		}
		select {
		case <-ctx.Done():
			return
		case <-time.After(1 * time.Second):
		}
	}
	glog.Warningf("volume %d: %d pending bytes remain after drain timeout", vid, vl.GetPendingSize(vid))
}

// DrainAndRemoveFromWritable removes the volume from the writable list
// immediately, then waits for pending assigned bytes to decay.
// Used by vacuum before compaction.
func (vl *VolumeLayout) DrainAndRemoveFromWritable(vid needle.VolumeId) {
	vl.accessLock.Lock()
	vl.removeFromWritable(vid)
	vl.accessLock.Unlock()
	vl.waitForPendingDrain(context.Background(), vid)
}

func (vl *VolumeLayout) isEmpty() bool {
	vl.accessLock.RLock()
	defer vl.accessLock.RUnlock()

	return len(vl.vid2location) == 0
}

func (vl *VolumeLayout) Lookup(vid needle.VolumeId) []*DataNode {
	vl.accessLock.RLock()
	defer vl.accessLock.RUnlock()

	if location := vl.vid2location[vid]; location != nil {
		return location.list
	}
	return nil
}

// HasDataNode reports whether the layout already lists dn as a location for vid.
// Used to detect a volume that is present on a data node but missing from the
// lookup index, so it can be re-registered.
func (vl *VolumeLayout) HasDataNode(vid needle.VolumeId, dn *DataNode) bool {
	vl.accessLock.RLock()
	defer vl.accessLock.RUnlock()

	location, ok := vl.vid2location[vid]
	if !ok {
		return false
	}
	for _, n := range location.list {
		if n.Ip == dn.Ip && n.Port == dn.Port {
			return true
		}
	}
	return false
}

func (vl *VolumeLayout) ListVolumeServers() (nodes []*DataNode) {
	vl.accessLock.RLock()
	defer vl.accessLock.RUnlock()

	for _, location := range vl.vid2location {
		nodes = append(nodes, location.list...)
	}
	return
}

func (vl *VolumeLayout) PickForWrite(count uint64, option *VolumeGrowOption) (vid needle.VolumeId, counter uint64, locationList *VolumeLocationList, shouldGrow bool, err error) {
	vl.accessLock.RLock()
	defer vl.accessLock.RUnlock()

	lenWriters := len(vl.writables)
	if lenWriters <= 0 {
		return 0, 0, nil, true, fmt.Errorf("%s", NoWritableVolumes)
	}
	if option.DataCenter == "" && option.Rack == "" && option.DataNode == "" {
		vid, locationList = vl.pickWeightedByRemaining(vl.writables)
		if locationList == nil || len(locationList.list) == 0 {
			return 0, 0, nil, false, fmt.Errorf("Strangely vid %s is on no machine!", vid.String())
		}
		return vid, count, locationList.Copy(), false, nil
	}

	// Scan from a random offset to collect up to pickSampleSize matching
	// candidates, avoiding a full scan + allocation in the common case.
	var sample [pickSampleSize]needle.VolumeId
	found := 0
	start := rand.IntN(lenWriters)
	for i := 0; i < lenWriters && found < pickSampleSize; i++ {
		writableVolumeId := vl.writables[(start+i)%lenWriters]
		volumeLocationList := vl.vid2location[writableVolumeId]
		for _, dn := range volumeLocationList.list {
			if option.DataCenter != "" && dn.GetDataCenter().Id() != NodeId(option.DataCenter) {
				continue
			}
			if option.Rack != "" && dn.GetRack().Id() != NodeId(option.Rack) {
				continue
			}
			if option.DataNode != "" && dn.Id() != NodeId(option.DataNode) {
				continue
			}
			sample[found] = writableVolumeId
			found++
			break
		}
	}
	if found == 0 {
		return vid, count, locationList, true, fmt.Errorf("%s in DataCenter:%v Rack:%v DataNode:%v", NoWritableVolumes, option.DataCenter, option.Rack, option.DataNode)
	}
	vid, locationList = vl.weightedPick(sample[:found])
	return vid, count, locationList.Copy(), false, nil
}

// pickSampleSize is how many random candidates to sample before doing a
// weighted pick. Keeps cost O(1) regardless of total writable volume count
// while still biasing toward emptier volumes.
const pickSampleSize = 3

// pickWeightedByRemaining randomly samples a few candidates from the list,
// then does a weighted pick among them by remaining capacity.
// Sampled candidates may repeat when len(candidates) is small relative to
// pickSampleSize; this is harmless — a repeated volume just gets proportionally
// more weight, which is a negligible statistical effect.
func (vl *VolumeLayout) pickWeightedByRemaining(candidates []needle.VolumeId) (needle.VolumeId, *VolumeLocationList) {
	n := len(candidates)
	if n <= pickSampleSize {
		return vl.weightedPick(candidates)
	}

	var sample [pickSampleSize]needle.VolumeId
	for i := range sample {
		sample[i] = candidates[rand.IntN(n)]
	}
	return vl.weightedPick(sample[:])
}

func (vl *VolumeLayout) weightedPick(candidates []needle.VolumeId) (needle.VolumeId, *VolumeLocationList) {
	if len(candidates) == 1 {
		vid := candidates[0]
		return vid, vl.vid2location[vid]
	}

	// first pass: sum weights
	var totalRemaining uint64
	for _, vid := range candidates {
		totalRemaining += vl.remainingSize(vid)
	}

	// second pass: weighted random pick
	pick := rand.Uint64N(totalRemaining)
	var cumulative uint64
	for _, vid := range candidates {
		cumulative += vl.remainingSize(vid)
		if pick < cumulative {
			return vid, vl.vid2location[vid]
		}
	}

	vid := candidates[0]
	return vid, vl.vid2location[vid]
}

func (vl *VolumeLayout) remainingSize(vid needle.VolumeId) uint64 {
	var size uint64
	if st := vl.sizeTracking[vid]; st != nil {
		size = st.effectiveSize
	}
	if size < vl.volumeSizeLimit {
		if r := vl.volumeSizeLimit - size; r > 1 {
			return r
		}
	}
	return 1
}

func (vl *VolumeLayout) HasGrowRequest() bool {
	return vl.growRequest.Load()
}

// AddGrowRequestIfAbsent atomically claims the pending-growth flag. It returns
// true for the one caller that transitions it from unset to set (the growth
// initiator); concurrent callers get false and are followers of that growth.
func (vl *VolumeLayout) AddGrowRequestIfAbsent() bool {
	return vl.growRequest.CompareAndSwap(false, true)
}
func (vl *VolumeLayout) DoneGrowRequest() {
	vl.growRequest.Store(false)
}

func (vl *VolumeLayout) SetLastGrowCount(count uint32) {
	if vl.lastGrowCount.Load() != count && count != 0 {
		vl.lastGrowCount.Store(count)
	}
}

func (vl *VolumeLayout) GetLastGrowCount() uint32 {
	return vl.lastGrowCount.Load()
}

func (vl *VolumeLayout) ShouldGrowVolumes() bool {
	writable, crowded := vl.GetWritableVolumeCount()
	return writable <= crowded
}

func (vl *VolumeLayout) ShouldGrowVolumesByDcAndRack(writables *[]needle.VolumeId, dcId NodeId, rackId NodeId) bool {
	// When replication spans multiple racks (DiffRackCount > 0), a writable
	// volume's replicas only cover some racks in a DC. It is wrong to
	// require every rack to host a replica — that would create volumes
	// endlessly in any DC with more racks than the copy count.
	// Instead, check at the DC level: if the DC already has a non-crowded
	// writable volume, no growth is needed for uncovered racks.
	checkDcOnly := vl.rp.DiffRackCount > 0
	for _, v := range *writables {
		for _, dn := range vl.Lookup(v) {
			if dn.GetDataCenter().Id() != dcId {
				continue
			}
			if !checkDcOnly && dn.GetRack().Id() != rackId {
				continue
			}
			if _, err := dn.GetVolumesById(v); err == nil {
				vl.accessLock.RLock()
				var size uint64
				if st := vl.sizeTracking[v]; st != nil {
					size = st.effectiveSize
				}
				vl.accessLock.RUnlock()
				if float64(size) <= float64(vl.volumeSizeLimit)*VolumeGrowStrategy.Threshold {
					return false
				}
			}
		}
	}
	return true
}

// RackGrowPlan is one volume grow action produced by the periodic rack-aware
// growth scan. An empty Rack means the grow is DC-wide.
type RackGrowPlan struct {
	DataCenter          string
	Rack                string
	WritableVolumeCount uint32
}

// PlanRackAwareGrowth returns the grow actions needed so every location that
// can serve writes keeps a non-crowded writable volume. stepCount is the
// default per-event increment.
//
// For rack-spanning replication (DiffRackCount > 0) a single logical volume
// already covers the racks the placement requires, so ShouldGrowVolumesByDcAndRack
// returns the same result for every rack in a DC. Planning one grow per rack
// would create racks×count too many volumes; plan one DC-wide grow instead.
// The default increment is capped at the configured copy_N so lowering
// master.volume_growth.copy_N reduces periodic growth.
func (vl *VolumeLayout) PlanRackAwareGrowth(dcs map[NodeId][]NodeId, lastGrowCount, stepCount uint32) (plans []RackGrowPlan) {
	writables := vl.CloneWritableVolumes()
	if c := VolumeGrowthCountForCopies(vl.rp.GetCopyCount()); c < stepCount {
		stepCount = c
	}
	growOncePerDc := vl.rp.DiffRackCount > 0
	// Spread lastGrowCount evenly across all grow targets. Summing every rack
	// up front keeps the divisor global, so DCs with different rack counts do
	// not each over-grow from a per-DC divisor.
	var rackPairs uint32
	for _, racks := range dcs {
		rackPairs += uint32(len(racks))
	}
	for dcId, racks := range dcs {
		if growOncePerDc {
			if !vl.ShouldGrowVolumesByDcAndRack(&writables, dcId, "") {
				continue
			}
			count := stepCount
			if lastGrowCount > 0 {
				count = ceilDiv(lastGrowCount, uint32(len(dcs)))
			}
			plans = append(plans, RackGrowPlan{DataCenter: string(dcId), WritableVolumeCount: count})
			continue
		}
		for _, rackId := range racks {
			if !vl.ShouldGrowVolumesByDcAndRack(&writables, dcId, rackId) {
				continue
			}
			count := stepCount
			if lastGrowCount > 0 {
				count = ceilDiv(lastGrowCount, rackPairs)
			}
			plans = append(plans, RackGrowPlan{DataCenter: string(dcId), Rack: string(rackId), WritableVolumeCount: count})
		}
	}
	return plans
}

func ceilDiv(a, b uint32) uint32 {
	if b == 0 {
		return 0
	}
	return (a + b - 1) / b
}

func (vl *VolumeLayout) GetWritableVolumeCount() (active, crowded int) {
	vl.accessLock.RLock()
	defer vl.accessLock.RUnlock()
	// The crowded map retains volumes that later became unwritable (full,
	// read-only), so their state survives transient writability flips. Count
	// only the writable ones: growth decisions compare crowded against
	// writables, and a raw len(vl.crowded) can exceed len(vl.writables)
	// permanently, demanding growth forever.
	for _, vid := range vl.writables {
		if _, ok := vl.crowded[vid]; ok {
			crowded++
		}
	}
	return len(vl.writables), crowded
}

func (vl *VolumeLayout) CloneWritableVolumes() (writables []needle.VolumeId) {
	vl.accessLock.RLock()
	writables = make([]needle.VolumeId, len(vl.writables))
	copy(writables, vl.writables)
	vl.accessLock.RUnlock()
	return writables
}

// CountUnderReplicatedVolumes returns the number of volumes in this layout
// that do not have enough replicas according to their replica placement
// configuration. Safe for concurrent access (RLock).
func (vl *VolumeLayout) CountUnderReplicatedVolumes() int {
	vl.accessLock.RLock()
	defer vl.accessLock.RUnlock()
	count := 0
	for vid := range vl.vid2location {
		if !vl.enoughCopies(vid) {
			count++
		}
	}
	return count
}

func (vl *VolumeLayout) removeFromWritable(vid needle.VolumeId) bool {
	toDeleteIndex := -1
	for k, id := range vl.writables {
		if id == vid {
			toDeleteIndex = k
			break
		}
	}
	if toDeleteIndex >= 0 {
		glog.V(0).Infoln("Volume", vid, "becomes unwritable")
		vl.writables = append(vl.writables[0:toDeleteIndex], vl.writables[toDeleteIndex+1:]...)
		return true
	}
	return false
}
func (vl *VolumeLayout) setVolumeWritable(vid needle.VolumeId) bool {
	for _, v := range vl.writables {
		if v == vid {
			return false
		}
	}
	glog.V(1).Infoln("Volume", vid, "becomes writable")
	vl.writables = append(vl.writables, vid)
	return true
}

func (vl *VolumeLayout) SetVolumeReadOnly(dn *DataNode, vid needle.VolumeId) bool {
	vl.accessLock.Lock()
	defer vl.accessLock.Unlock()

	if location, ok := vl.vid2location[vid]; ok {
		location.SetReadOnly(dn, true)
		return vl.removeFromWritable(vid)
	}
	return true
}

func (vl *VolumeLayout) SetVolumeWritable(dn *DataNode, vid needle.VolumeId) bool {
	vl.accessLock.Lock()
	defer vl.accessLock.Unlock()

	if location, ok := vl.vid2location[vid]; ok {
		location.SetReadOnly(dn, false)
	}

	if vl.enoughCopies(vid) {
		return vl.setVolumeWritable(vid)
	}
	return false
}

func (vl *VolumeLayout) SetVolumeUnavailable(dn *DataNode, vid needle.VolumeId) bool {
	vl.accessLock.Lock()
	defer vl.accessLock.Unlock()

	if location, ok := vl.vid2location[vid]; ok {
		if removed := location.Remove(dn); removed != nil {
			moveLookupOwnership(vid, removed, nil)
			wasWritable := false
			if location.Length() < vl.rp.GetCopyCount() {
				glog.V(0).Infoln("Volume", vid, "has", location.Length(), "replica, less than required", vl.rp.GetCopyCount())
				wasWritable = vl.removeFromWritable(vid)
			}
			if location.Length() == 0 {
				// Drop the now-empty entry. Otherwise Lookup returns a non-nil
				// empty location list, which surfaces as "volume id not found"
				// even though the volume still appears in volume.list/admin UI.
				// Mirrors UnRegisterVolume.
				delete(vl.vid2location, vid)
				delete(vl.sizeTracking, vid)
				vl.removeFromCrowded(vid)
			}
			return wasWritable
		}
	}
	return false
}
func (vl *VolumeLayout) SetVolumeAvailable(dn *DataNode, vid needle.VolumeId, isReadOnly, isFullCapacity bool) (becameWritable bool) {
	restoreActiveVolumeCount := false
	vl.accessLock.Lock()
	defer func() {
		vl.accessLock.Unlock()
		if restoreActiveVolumeCount {
			vl.adjustActiveVolumeCount(vid, +1)
		}
	}()

	vInfo, err := dn.GetVolumesById(vid)
	if err != nil {
		return false
	}
	if vl.dropped {
		return false
	}

	// A disconnect during a long vacuum can drop the entry while the volume is
	// still on the node; re-create it instead of dereferencing a nil location,
	// so the commit also repairs the split.
	moveLookupOwnership(vid, vl.getOrCreateLocationList(vid).Set(dn), dn)

	if vInfo.ReadOnly || isReadOnly || isFullCapacity {
		return false
	}
	vl.initSizeTracking(vid, vInfo.Size, vInfo.CompactRevision)

	if vl.enoughCopies(vid) {
		becameWritable = vl.setVolumeWritable(vid)
		if becameWritable {
			if st := vl.sizeTracking[vid]; st != nil && !st.fullSince.IsZero() {
				// fullSince marks a prior capacity-full removal that already
				// decremented activeVolumeCount. Re-adding must pair it once.
				st.fullSince = time.Time{}
				restoreActiveVolumeCount = true
			}
		}
	}
	return becameWritable
}

func (vl *VolumeLayout) enoughCopies(vid needle.VolumeId) bool {
	locations := vl.vid2location[vid].Length()
	desired := vl.rp.GetCopyCount()
	return locations == desired || (vl.replicationAsMin && locations > desired)
}

func (vl *VolumeLayout) SetVolumeCapacityFull(vid needle.VolumeId) bool {
	vl.accessLock.Lock()
	defer vl.accessLock.Unlock()

	wasWritable := vl.removeFromWritable(vid)
	if wasWritable {
		// Stamp fullSince so UpdateVolumeSize's recovery branch can re-add the
		// volume once it shrinks; RecordAssign does this for the write path.
		// Only on actual removal, to stay paired with the activeVolumeCount
		// decrement the caller does for the same bool.
		if st := vl.sizeTracking[vid]; st != nil && st.fullSince.IsZero() {
			st.fullSince = time.Now()
		}
		glog.V(0).Infof("Volume %d reaches full capacity.", vid)
	}
	return wasWritable
}

func (vl *VolumeLayout) removeFromCrowded(vid needle.VolumeId) {
	if _, ok := vl.crowded[vid]; ok {
		glog.V(0).Infoln("Volume", vid, "becomes uncrowded")
		delete(vl.crowded, vid)
	}
}

func (vl *VolumeLayout) setVolumeCrowded(vid needle.VolumeId) {
	if _, ok := vl.crowded[vid]; !ok {
		vl.crowded[vid] = struct{}{}
		glog.V(0).Infoln("Volume", vid, "becomes crowded")
	}
}

func (vl *VolumeLayout) SetVolumeCrowded(vid needle.VolumeId) {
	// since delete is guarded by accessLock.Lock(),
	// and is always called in sequential order,
	// RLock() should be safe enough
	vl.accessLock.RLock()
	defer vl.accessLock.RUnlock()

	vl.setVolumeCrowded(vid)
}

type VolumeLayoutInfo struct {
	Replication string            `json:"replication"`
	TTL         string            `json:"ttl"`
	Writables   []needle.VolumeId `json:"writables"`
	Collection  string            `json:"collection"`
	DiskType    string            `json:"diskType"`
}

func (vl *VolumeLayout) ToInfo() (info VolumeLayoutInfo) {
	info.Replication = vl.rp.String()
	info.TTL = vl.ttl.String()
	info.Writables = vl.writables
	info.DiskType = vl.diskType.ReadableString()
	//m["locations"] = vl.vid2location
	return
}

func (vlc *VolumeLayoutCollection) ToVolumeGrowRequest() *master_pb.VolumeGrowRequest {
	return &master_pb.VolumeGrowRequest{
		Collection:  vlc.Collection,
		Replication: vlc.VolumeLayout.rp.String(),
		Ttl:         vlc.VolumeLayout.ttl.String(),
		DiskType:    vlc.VolumeLayout.diskType.String(),
	}
}

func (vl *VolumeLayout) Stats() *VolumeLayoutStats {
	vl.accessLock.RLock()
	defer vl.accessLock.RUnlock()

	ret := &VolumeLayoutStats{}

	freshThreshold := time.Now().Unix() - 60

	for vid, vll := range vl.vid2location {
		size, fileCount := vll.Stats(vid, freshThreshold)
		ret.FileCount += uint64(fileCount)
		ret.UsedSize += size * uint64(vll.Length())
		ret.LogicalUsedSize += size
		if vll.AnyReadOnly() {
			ret.TotalSize += size * uint64(vll.Length())
		} else {
			ret.TotalSize += vl.volumeSizeLimit * uint64(vll.Length())
		}
	}

	return ret
}