Files
seaweedfs/weed/credential/filer_etc/filer_etc_service_account.go
T
Chris Lu 5ff49909a0 fix(s3api/iam): avoid transient AccessDenied from full reloads on single IAM file changes (#11271)
* fix(s3api/iam): fail config snapshot on empty or malformed IAM files

A full IAM reload reads every identity/policy/service-account/group file
from the filer. When an external secrets tool rewrites a file, a reload
that reads it mid-rewrite sees empty or partially-written content. The
identity, policy and service-account loaders silently skipped such files
(``continue``), so the snapshot was missing entries that still existed
on disk. The atomic swap then installed an incomplete identity set while
``isAuthEnabled`` stayed on, denying unrelated clients mid-reload
(#11259).

The group loader and the read-error paths already fail the snapshot in
this situation (a skipped entry reads as deleted). Apply the same
behavior to empty content and unmarshal failures across the identity,
policy, service-account and group loaders, so a transient mid-rewrite
fails the reload (preserving the last known-good state) instead of
silently dropping entries.

* fix(s3api/iam): coalesce burst IAM config reloads through the reload queue

onIamConfigChange did a full synchronous reload for every identity/policy
file change event. When several independently-refreshing credentials
rewrite their files within the same second, that produced a burst of
dozens of back-to-back full reloads, each reading the whole store and
widening the window where a mid-rewrite file is observed (#11259).

Route every IAM config change through the existing coalescing reload
queue (scheduleReload/reloadRetryLoop) instead. A burst of N events now
collapses into a single reload (plus one tail reload for events that
arrived while one was in flight). scheduleReload gains a reason argument
for the existing log line; the reloadRetryLoop already retries failed
reloads, so the per-event failure handoff is no longer needed.

Tests that asserted on the synchronous reload now wire up the queue
(centralized in newTestS3ApiServerWithMemoryIAM) and poll via
waitForIdentity/waitForIdentityGone. Adds TestOnIamConfigChangeCoalescesBurstReloads
showing 50 events coalesce into <=3 reloads.

* fix(s3api/iam): skip non-JSON auxiliary files before failing IAM snapshot

Per review: the multi-file loaders unmarshal every entry in an IAM
directory, so a non-JSON auxiliary file (README, .DS_Store, a migration
backup such as identity.json.old) would hit the new empty/malformed
errors and reject the whole snapshot, blocking all later IAM reloads.

Only *.json files are IAM objects (SeaweedFS writes identities,
policies, service accounts and groups as <name>.json, and other call
sites already gate on the .json suffix). Skip non-.json entries at the
top of each loader loop, before reading content, so auxiliary files are
ignored while empty/malformed .json files still fail the snapshot.

Adds TestLoadConfigurationIgnoresNonJsonAuxiliaryFiles.

* fix(s3api/iam): reject IAM files with empty identifiers and skip aux in listing

Per review:

- ListPolicyNames listed every regular entry in the policies directory as a
  policy name, including non-JSON auxiliary files, but GetPolicy cannot
  retrieve them. Apply the same .json suffix filter used by the loader so
  the list only exposes retrievable policies.

- json.Unmarshal accepts `{}` and unknown fields. The identity and group
  loaders merge by the decoded Name (not the file name), so a `{}` file
  could install an empty-key record and displace a real one; the
  service-account loader accepted an empty Id. Validate Identity.Name,
  Group.Name and ServiceAccount.Id (via validateServiceAccountId) after
  unmarshal and fail the snapshot on empty identifiers.

Adds TestFilerEtcStoreListPolicyNamesSkipsNonJsonAuxiliary and
empty-identifier regression tests for identity, group and service-account
files.
2026-09-11 10:42:19 -07:00

212 lines
6.1 KiB
Go

package filer_etc
import (
"context"
"encoding/json"
"errors"
"fmt"
"strings"
"github.com/seaweedfs/seaweedfs/weed/credential"
"github.com/seaweedfs/seaweedfs/weed/filer"
"github.com/seaweedfs/seaweedfs/weed/glog"
"github.com/seaweedfs/seaweedfs/weed/pb/filer_pb"
"github.com/seaweedfs/seaweedfs/weed/pb/iam_pb"
)
func validateServiceAccountId(id string) error {
return credential.ValidateServiceAccountId(id)
}
func (store *FilerEtcStore) loadServiceAccountsFromMultiFile(ctx context.Context, s3cfg *iam_pb.S3ApiConfiguration) error {
return store.withFilerClient(func(client filer_pb.SeaweedFilerClient) error {
dir := filer.IamConfigDirectory + "/" + IamServiceAccountsDirectory
entries, err := listEntries(ctx, client, dir)
if err != nil {
if err == filer_pb.ErrNotFound {
return nil
}
return err
}
for _, entry := range entries {
if entry.IsDirectory {
continue
}
if !strings.HasSuffix(entry.Name, ".json") {
continue
}
var content []byte
if len(entry.Content) > 0 {
content = entry.Content
} else {
c, err := filer.ReadInsideFiler(ctx, client, dir, entry.Name)
if err != nil {
return fmt.Errorf("failed to read service account file %s: %w", entry.Name, err)
}
content = c
}
if len(content) == 0 {
return fmt.Errorf("service account file %s is empty", entry.Name)
}
sa := &iam_pb.ServiceAccount{}
if err := json.Unmarshal(content, sa); err != nil {
return fmt.Errorf("failed to unmarshal service account %s: %w", entry.Name, err)
}
if err := validateServiceAccountId(sa.Id); err != nil {
return fmt.Errorf("service account file %s: %w", entry.Name, err)
}
s3cfg.ServiceAccounts = append(s3cfg.ServiceAccounts, sa)
}
return nil
})
}
func (store *FilerEtcStore) saveServiceAccount(ctx context.Context, sa *iam_pb.ServiceAccount) error {
if sa == nil {
return fmt.Errorf("service account is nil")
}
if err := validateServiceAccountId(sa.Id); err != nil {
return err
}
return store.withFilerClient(func(client filer_pb.SeaweedFilerClient) error {
data, err := json.MarshalIndent(sa, "", " ")
if err != nil {
return err
}
return filer.SaveInsideFiler(context.Background(), client, filer.IamConfigDirectory+"/"+IamServiceAccountsDirectory, sa.Id+".json", data)
})
}
func (store *FilerEtcStore) deleteServiceAccount(ctx context.Context, saId string) error {
if err := validateServiceAccountId(saId); err != nil {
return err
}
return store.withFilerClient(func(client filer_pb.SeaweedFilerClient) error {
resp, err := client.DeleteEntry(ctx, &filer_pb.DeleteEntryRequest{
Directory: filer.IamConfigDirectory + "/" + IamServiceAccountsDirectory,
Name: saId + ".json",
})
if err != nil {
if strings.Contains(err.Error(), filer_pb.ErrNotFound.Error()) {
return credential.ErrServiceAccountNotFound
}
return err
}
if resp != nil && resp.Error != "" {
if strings.Contains(resp.Error, filer_pb.ErrNotFound.Error()) {
return credential.ErrServiceAccountNotFound
}
return fmt.Errorf("delete service account %s: %s", saId, resp.Error)
}
return nil
})
}
func (store *FilerEtcStore) CreateServiceAccount(ctx context.Context, sa *iam_pb.ServiceAccount) error {
existing, err := store.GetServiceAccount(ctx, sa.Id)
if err != nil {
if !errors.Is(err, credential.ErrServiceAccountNotFound) {
return err
}
} else if existing != nil {
return fmt.Errorf("service account %s already exists", sa.Id)
}
return store.saveServiceAccount(ctx, sa)
}
func (store *FilerEtcStore) UpdateServiceAccount(ctx context.Context, id string, sa *iam_pb.ServiceAccount) error {
if sa.Id != id {
return fmt.Errorf("service account ID mismatch")
}
_, err := store.GetServiceAccount(ctx, id)
if err != nil {
return err
}
return store.saveServiceAccount(ctx, sa)
}
func (store *FilerEtcStore) DeleteServiceAccount(ctx context.Context, id string) error {
return store.deleteServiceAccount(ctx, id)
}
func (store *FilerEtcStore) GetServiceAccount(ctx context.Context, id string) (*iam_pb.ServiceAccount, error) {
if err := validateServiceAccountId(id); err != nil {
return nil, err
}
var sa *iam_pb.ServiceAccount
err := store.withFilerClient(func(client filer_pb.SeaweedFilerClient) error {
data, err := filer.ReadInsideFiler(ctx, client, filer.IamConfigDirectory+"/"+IamServiceAccountsDirectory, id+".json")
if err != nil {
if err == filer_pb.ErrNotFound {
return credential.ErrServiceAccountNotFound
}
return err
}
if len(data) == 0 {
return credential.ErrServiceAccountNotFound
}
sa = &iam_pb.ServiceAccount{}
return json.Unmarshal(data, sa)
})
return sa, err
}
func (store *FilerEtcStore) ListServiceAccounts(ctx context.Context) ([]*iam_pb.ServiceAccount, error) {
var accounts []*iam_pb.ServiceAccount
err := store.withFilerClient(func(client filer_pb.SeaweedFilerClient) error {
dir := filer.IamConfigDirectory + "/" + IamServiceAccountsDirectory
entries, err := listEntries(ctx, client, dir)
if err != nil {
if err == filer_pb.ErrNotFound {
return nil
}
return err
}
for _, entry := range entries {
if entry.IsDirectory {
continue
}
var content []byte
if len(entry.Content) > 0 {
content = entry.Content
} else {
c, err := filer.ReadInsideFiler(ctx, client, dir, entry.Name)
if err != nil {
glog.Warningf("Failed to read service account file %s: %v", entry.Name, err)
continue
}
content = c
}
if len(content) > 0 {
sa := &iam_pb.ServiceAccount{}
if err := json.Unmarshal(content, sa); err != nil {
glog.Warningf("Failed to unmarshal service account %s: %v", entry.Name, err)
continue
}
accounts = append(accounts, sa)
}
}
return nil
})
return accounts, err
}
func (store *FilerEtcStore) GetServiceAccountByAccessKey(ctx context.Context, accessKey string) (*iam_pb.ServiceAccount, error) {
accounts, err := store.ListServiceAccounts(ctx)
if err != nil {
return nil, err
}
for _, sa := range accounts {
if sa.Credential != nil && sa.Credential.AccessKey == accessKey {
return sa, nil
}
}
return nil, credential.ErrAccessKeyNotFound
}