Files
seaweedfs/weed/filer/filer.go
T
Chris Lu 5c43c03b76 filer: restore a folder that received an entry while it was deleted (#10783)
* filer: restore a folder that received an entry while it was deleted

The empty-folder cleaner checks that a folder is empty and then deletes it,
and those two steps are not atomic. An entry created in between survives the
delete but loses the directory holding it: still readable by its own path, yet
absent from every listing until a later write happens to recreate the parent.

Record the folders deleted in each pass and re-check them on the next one,
putting back any that turned out to hold entries. The check waits a pass on
purpose - a writer looks up the parent before inserting the child, so checking
straight after the delete can still run ahead of the insert and see nothing.

Restoring a directory that holds entries is always correct, and restoring one
whose entry went away again just leaves an empty folder for a later pass to
collect, so the repair needs no locking or coordination.

Claude-Session: https://claude.ai/code/session_01HdLXMUopwgofPb1ZEmiE6r

* filer: keep failed restores queued and inherit the ancestor's ownership

Two gaps in the restore pass.

A folder whose count or restore hit a transient store error was dropped from
the tracking list and never looked at again, leaving its entries out of
listings until some later write recreated the folder - the very thing the pass
exists to avoid. Put those back for the next pass, still under the cap.

A restored folder was minted with a fixed mode and no owner, so a directory
that had been private came back world-readable and owned by root. Take the
mode and ownership from the nearest ancestor still present instead.

Claude-Session: https://claude.ai/code/session_01HdLXMUopwgofPb1ZEmiE6r

* filer: let the redis stores keep a directory listing that still has entries

On the redis stores the listing is not derived from the entries, it is the only
record that they sit under that directory. DeleteEntry opened by dropping it
outright, so an entry that arrived after the caller judged the directory empty
lost its membership and became unreachable: readable by exact path, absent from
every listing, and invisible to any later check, since counting the directory
reads the listing that was just destroyed. Nothing could detect or repair it.

Drop the listing in DeleteFolderChildren instead, alongside the children it
describes, and leave it alone in DeleteEntry. redis3 needs it explicitly, since
removeChildren clears the skip list nodes but not the list itself, and the plain
redis store was leaking the key entirely.

Claude-Session: https://claude.ai/code/session_01HdLXMUopwgofPb1ZEmiE6r

* filer: restore folders with their own attributes, and observe them for a window

Five gaps in the restore pass.

The restored directory was reconstructed from whatever ancestor happened to
still be present, and the mode was ORed with 0111 on the way. A private
directory under a world-traversable parent came back granting traversal it had
denied. Read the folder's own attributes before deleting it and put exactly
those back. That also removes the ancestor walk, which treated a transient
store error as "not found" and silently fell through to a broader ancestor.

A single check a pass later was not a delay at all. Ticker sends coalesce, so
when a pass runs long the next one starts immediately, and a writer already
past its parent lookup can insert after the check has read zero - after which
the folder was discarded for good. Keep each folder under observation for a
bounded wall-clock window and re-check it on every pass until it expires. This
narrows the exposure rather than closing it; only making the emptiness check
and the delete atomic would do that.

A delete that returned an error was never observed at all, though the redis
stores drop the folder before its parent-list member, so a failure return is
not proof the folder survived. Record the folder before the delete instead.

Restores now run shallowest first, so a folder taken by the parent cascade is
rebuilt with its own attributes before anything below it needs it as a parent.

Claude-Session: https://claude.ai/code/session_01HdLXMUopwgofPb1ZEmiE6r

* filer: recover a deleted folder from the create event for the entry that raced it

Checking each deleted folder on a timer was the wrong instrument. It cost a
listing per folder per pass, and it could only ever be a guess about when the
racing write would land.

The metadata stream already carries the answer. A folder is recorded before it
is deleted, so any entry that can be orphaned is created after that record and
its create event names that exact directory. Match the event against the
recently deleted folders and the folder is known to need putting back, rather
than inferred to.

The window stops being a guess at the race and becomes what it should be: how
far behind the event stream is allowed to run before a folder stops being
watched. Listing is now done once, for a folder an event has already named, to
skip the restore when the entry has since gone away again.

Claude-Session: https://claude.ai/code/session_01HdLXMUopwgofPb1ZEmiE6r

* filer: bound how long a folder is watched, and rebuild ancestors from themselves

Four gaps found reviewing the restore pass.

A folder whose restore kept failing was never let go: the written-to check ran
before the age check, so it was picked up, retried, put back, and counted again
on every pass for the life of the process. Apply the window first, whatever
state the folder is in.

At the cap, the folder being recorded was the one turned away, though it is the
one whose race is still live - the older entries are already close to ageing
out. Give up one of those instead, picked as the oldest of a small sample so
the cost stays flat under heavy deletion rates.

An ancestor taken by the same cascade was left to the descendant's restore to
recreate, which minted it from the descendant's attributes and handed back
access the ancestor never granted. Rebuild those from what they were, ahead of
anything below them.

Reading a directory's attributes assumed an entry came back. Some stores return
nothing with no error, so treat that as not found. The mode is also taken whole
rather than through Perm(), which was dropping setgid, setuid and sticky.

Claude-Session: https://claude.ai/code/session_01HdLXMUopwgofPb1ZEmiE6r

* redis3: take a directory listing left behind by a failed delete

Removing the last name deletes the list, and if that delete fails the header
survives pointing at a name that is gone. The retry finds nothing to remove,
reports no changes, and returns before reaching the delete, so the key stays
for good. Take it on that path too.

Claude-Session: https://claude.ai/code/session_01HdLXMUopwgofPb1ZEmiE6r
2026-08-17 00:04:07 -07:00

687 lines
24 KiB
Go

package filer
import (
"context"
"errors"
"fmt"
"os"
"sort"
"strings"
"time"
"github.com/seaweedfs/seaweedfs/weed/s3api/s3bucket"
"github.com/seaweedfs/seaweedfs/weed/cluster/lock_manager"
"github.com/seaweedfs/seaweedfs/weed/filer/empty_folder_cleanup"
"github.com/seaweedfs/seaweedfs/weed/cluster"
"github.com/seaweedfs/seaweedfs/weed/pb"
"github.com/seaweedfs/seaweedfs/weed/pb/master_pb"
"google.golang.org/grpc"
"github.com/seaweedfs/seaweedfs/weed/glog"
"github.com/seaweedfs/seaweedfs/weed/pb/filer_pb"
"github.com/seaweedfs/seaweedfs/weed/stats"
"github.com/seaweedfs/seaweedfs/weed/util"
"github.com/seaweedfs/seaweedfs/weed/util/log_buffer"
"github.com/seaweedfs/seaweedfs/weed/wdclient"
"golang.org/x/sync/singleflight"
)
const (
LogFlushInterval = time.Minute
PaginationSize = 1024
FilerStoreId = "filer.store.id"
)
var (
OS_UID = uint32(os.Getuid())
OS_GID = uint32(os.Getgid())
)
type Filer struct {
UniqueFilerId int32
UniqueFilerEpoch int32
Store VirtualFilerStore
MasterClient *wdclient.MasterClient
fileIdDeletionQueue *util.UnboundedQueue
GrpcDialOption grpc.DialOption
DirBucketsPath string
Cipher bool
LocalMetaLogBuffer *log_buffer.LogBuffer
metaLogCollection string
metaLogReplication string
DefaultDiskType string
MetaAggregator *MetaAggregator
Signature int32
FilerConf *FilerConf
placementOverlay PlacementOverlay
RemoteStorage *FilerRemoteStorage
lazyFetchGroup singleflight.Group
lazyListGroup singleflight.Group
Dlm *lock_manager.DistributedLockManager
MaxFilenameLength uint32
deletionQuit chan struct{}
DeletionRetryQueue *DeletionRetryQueue
EmptyFolderCleaner *empty_folder_cleanup.EmptyFolderCleaner
EmptyFolderCleanupDelay time.Duration
persistedLogCache *persistedLogCache
}
func NewFiler(masters pb.ServerDiscovery, grpcDialOption grpc.DialOption, filerHost pb.ServerAddress, filerGroup string, collection string, replication string, dataCenter string, maxFilenameLength uint32, notifyFn func()) *Filer {
f := &Filer{
MasterClient: wdclient.NewMasterClient(grpcDialOption, filerGroup, cluster.FilerType, filerHost, dataCenter, "", masters),
fileIdDeletionQueue: util.NewUnboundedQueue(),
GrpcDialOption: grpcDialOption,
FilerConf: NewFilerConf(),
RemoteStorage: NewFilerRemoteStorage(),
UniqueFilerId: util.RandomInt32(),
Dlm: lock_manager.NewDistributedLockManager(filerHost),
MaxFilenameLength: maxFilenameLength,
deletionQuit: make(chan struct{}),
DeletionRetryQueue: NewDeletionRetryQueue(),
persistedLogCache: newPersistedLogCache(persistedLogCacheMaxBytes),
}
if f.UniqueFilerId < 0 {
f.UniqueFilerId = -f.UniqueFilerId
}
// ReadFromDiskFn is intentionally nil here. SubscribeLocalMetadata already
// manages disk reads explicitly with shouldReadFromDisk / lastCheckedFlushTsNs
// tracking. Setting ReadFromDiskFn would cause LoopProcessLogData to issue a
// redundant ReadPersistedLogBuffer call (ListDirectoryEntries + readahead
// goroutine) on every 250ms health-check tick when a subscriber encounters
// ResumeFromDiskError, adding significant CPU and GC pressure even when idle.
f.LocalMetaLogBuffer = log_buffer.NewLogBuffer("local", LogFlushInterval, f.logFlushFunc, nil, notifyFn)
f.metaLogCollection = collection
f.metaLogReplication = replication
if newPlacementOverlay != nil {
f.placementOverlay = newPlacementOverlay(f)
}
go f.loopProcessingDeletion()
return f
}
func (f *Filer) MaybeBootstrapFromOnePeer(self pb.ServerAddress, existingNodes []*master_pb.ClusterNodeUpdate, snapshotTime time.Time) (err error) {
if len(existingNodes) == 0 {
return
}
sort.Slice(existingNodes, func(i, j int) bool {
return existingNodes[i].CreatedAtNs < existingNodes[j].CreatedAtNs
})
earliestNode := existingNodes[0]
if pb.ServerAddress(earliestNode.Address).Equals(self) {
return
}
glog.V(0).Infof("bootstrap from %v clientId:%d", earliestNode.Address, f.UniqueFilerId)
return pb.WithFilerClient(false, f.UniqueFilerId, pb.ServerAddress(earliestNode.Address), f.GrpcDialOption, func(client filer_pb.SeaweedFilerClient) error {
return filer_pb.StreamBfs(client, "/", snapshotTime.UnixNano(), func(parentPath util.FullPath, entry *filer_pb.Entry) error {
return f.Store.InsertEntry(context.Background(), FromPbEntry(string(parentPath), entry))
})
})
}
func (f *Filer) AggregateFromPeers(self pb.ServerAddress, existingNodes []*master_pb.ClusterNodeUpdate, startFrom time.Time) {
var snapshot []pb.ServerAddress
for _, node := range existingNodes {
address := pb.ServerAddress(node.Address)
snapshot = append(snapshot, address)
}
f.Dlm.LockRing.SetSnapshot(snapshot, 0)
glog.V(0).Infof("%s aggregate from peers %+v", self, snapshot)
// Initialize the empty folder cleaner using the same LockRing as Dlm for consistent hashing
f.EmptyFolderCleaner = empty_folder_cleanup.NewEmptyFolderCleaner(f, f.Dlm.LockRing, self, f.DirBucketsPath, f.EmptyFolderCleanupDelay)
f.MetaAggregator = NewMetaAggregator(f, self, f.GrpcDialOption)
f.MasterClient.SetOnPeerUpdateFn(func(update *master_pb.ClusterNodeUpdate, startFrom time.Time) {
if update.NodeType != cluster.FilerType {
return
}
// Lock ring is now managed by the master via LockRingUpdate,
// so we no longer call AddServer/RemoveServer here.
f.MetaAggregator.OnPeerUpdate(update, startFrom)
})
f.MasterClient.SetOnLockRingUpdateFn(func(update *master_pb.LockRingUpdate) {
var servers []pb.ServerAddress
for _, s := range update.Servers {
servers = append(servers, pb.ServerAddress(s))
}
glog.V(0).Infof("LockRing: applying master ring update v%d: %v", update.Version, servers)
f.Dlm.LockRing.SetSnapshot(servers, update.Version)
})
for _, peerUpdate := range existingNodes {
f.MetaAggregator.OnPeerUpdate(peerUpdate, startFrom)
}
}
func (f *Filer) ListExistingPeerUpdates(ctx context.Context) (existingNodes []*master_pb.ClusterNodeUpdate) {
return cluster.ListExistingPeerUpdates(f.GetMaster(ctx), f.GrpcDialOption, f.MasterClient.FilerGroup, cluster.FilerType)
}
func (f *Filer) SetStore(store FilerStore) (isFresh bool) {
f.Store = NewFilerStoreWrapper(store)
return f.setOrLoadFilerStoreSignature(store)
}
func (f *Filer) setOrLoadFilerStoreSignature(store FilerStore) (isFresh bool) {
storeIdBytes, err := store.KvGet(context.Background(), []byte(FilerStoreId))
if err == ErrKvNotFound || err == nil && len(storeIdBytes) == 0 {
f.Signature = util.RandomInt32()
storeIdBytes = make([]byte, 4)
util.Uint32toBytes(storeIdBytes, uint32(f.Signature))
if err = store.KvPut(context.Background(), []byte(FilerStoreId), storeIdBytes); err != nil {
glog.Fatalf("set %s=%d : %v", FilerStoreId, f.Signature, err)
}
glog.V(0).Infof("create %s to %d", FilerStoreId, f.Signature)
return true
} else if err == nil && len(storeIdBytes) == 4 {
f.Signature = int32(util.BytesToUint32(storeIdBytes))
glog.V(0).Infof("existing %s = %d", FilerStoreId, f.Signature)
} else {
glog.Fatalf("read %v=%v : %v", FilerStoreId, string(storeIdBytes), err)
}
return false
}
func (f *Filer) GetStore() (store FilerStore) {
return f.Store
}
func (fs *Filer) GetMaster(ctx context.Context) pb.ServerAddress {
return fs.MasterClient.GetMaster(ctx)
}
func (f *Filer) BeginTransaction(ctx context.Context) (context.Context, error) {
return f.Store.BeginTransaction(ctx)
}
func (f *Filer) CommitTransaction(ctx context.Context) error {
return f.Store.CommitTransaction(ctx)
}
func (f *Filer) RollbackTransaction(ctx context.Context) error {
return f.Store.RollbackTransaction(ctx)
}
// CreateEntry creates or replaces an entry. When existing is non-nil the caller
// has already fetched the current entry at this path under a path lock, and it
// is reused instead of looking the store up again; pass nil to have CreateEntry
// look it up itself.
func (f *Filer) CreateEntry(ctx context.Context, entry *Entry, existing *Entry, o_excl bool, isFromOtherCluster bool, signatures []int32, skipCreateParentDir bool, maxFilenameLength uint32) error {
if string(entry.FullPath) == "/" {
return nil
}
if entry.FullPath.IsLongerFileName(maxFilenameLength) {
return filer_pb.ErrEntryNameTooLong
}
if entry.IsDirectory() {
entry.Attr.TtlSec = 0
}
if entry.Attr.Atime.IsZero() {
entry.Attr.Atime = entryInitialAtime(entry.Attr)
}
oldEntry := existing
if oldEntry == nil {
oldEntry, _ = f.FindEntry(ctx, entry.FullPath)
}
/*
if !hasWritePermission(lastDirectoryEntry, entry) {
glog.V(0).Infof("directory %s: %v, entry: uid=%d gid=%d",
lastDirectoryEntry.FullPath, lastDirectoryEntry.Attr, entry.Uid, entry.Gid)
return fmt.Errorf("no write permission in folder %v", lastDirectoryEntry.FullPath)
}
*/
if oldEntry == nil {
f.ensureEntryInode(entry)
if !skipCreateParentDir {
dirParts := strings.Split(string(entry.FullPath), "/")
if err := f.ensureParentDirectoryEntry(ctx, entry, dirParts, len(dirParts)-1, isFromOtherCluster); err != nil {
return err
}
}
glog.V(4).InfofCtx(ctx, "InsertEntry %s: new entry: %v", entry.FullPath, entry.Name())
if err := f.Store.InsertEntry(ctx, entry); err != nil {
glog.ErrorfCtx(ctx, "insert entry %s: %v", entry.FullPath, err)
return fmt.Errorf("insert entry %s: %v", entry.FullPath, err)
}
if !entry.IsDirectory() {
stats.FilerObjectSizeBytesHistogram.Observe(float64(entry.Size()))
}
} else {
if o_excl {
glog.V(3).InfofCtx(ctx, "EEXIST: entry %s already exists", entry.FullPath)
return fmt.Errorf("%s: %w", entry.FullPath, filer_pb.ErrEntryAlreadyExists)
}
glog.V(4).InfofCtx(ctx, "UpdateEntry %s: old entry: %v", entry.FullPath, oldEntry.Name())
if err := f.UpdateEntry(ctx, oldEntry, entry); err != nil {
glog.ErrorfCtx(ctx, "update entry %s: %v", entry.FullPath, err)
return fmt.Errorf("update entry %s: %v", entry.FullPath, err)
}
}
f.NotifyUpdateEvent(ctx, oldEntry, entry, true, isFromOtherCluster, signatures)
f.deleteChunksIfNotNew(ctx, oldEntry, entry)
glog.V(4).InfofCtx(ctx, "CreateEntry %s: created", entry.FullPath)
return nil
}
func (f *Filer) ensureParentDirectoryEntry(ctx context.Context, entry *Entry, dirParts []string, level int, isFromOtherCluster bool) (err error) {
if level == 0 {
return nil
}
dirPath := "/" + util.Join(dirParts[:level]...)
// fmt.Printf("%d dirPath: %+v\n", level, dirPath)
// check the store directly
glog.V(4).InfofCtx(ctx, "find uncached directory: %s", dirPath)
dirEntry, findErr := f.FindEntry(ctx, util.FullPath(dirPath))
if findErr != nil && !errors.Is(findErr, filer_pb.ErrNotFound) {
return findErr
}
// no such existing directory
if dirEntry == nil {
// fmt.Printf("dirParts: %v %v %v\n", dirParts[0], dirParts[1], dirParts[2])
// dirParts[0] == "" and dirParts[1] == "buckets"
isUnderBuckets := len(dirParts) >= 3 && dirParts[1] == "buckets"
if isUnderBuckets {
if !strings.HasPrefix(dirParts[2], ".") {
if err := s3bucket.VerifyS3BucketName(dirParts[2]); err != nil {
return fmt.Errorf("invalid bucket name %s: %v", dirParts[2], err)
}
}
}
// ensure parent directory
if err = f.ensureParentDirectoryEntry(ctx, entry, dirParts, level-1, isFromOtherCluster); err != nil {
return err
}
// create the directory
now := time.Now()
dirEntry = &Entry{
FullPath: util.FullPath(dirPath),
Attr: Attr{
Mtime: now,
Crtime: now,
Mode: os.ModeDir | entry.Mode | 0111,
Uid: entry.Uid,
Gid: entry.Gid,
UserName: entry.UserName,
GroupNames: entry.GroupNames,
},
}
f.ensureEntryInode(dirEntry)
if isUnderBuckets && level > 3 {
// Parent directories under buckets are created automatically; no additional logging.
}
glog.V(2).InfofCtx(ctx, "create directory: %s %v", dirPath, dirEntry.Mode)
mkdirErr := f.Store.InsertEntry(ctx, dirEntry)
if mkdirErr != nil {
if fEntry, err := f.FindEntry(ctx, util.FullPath(dirPath)); err == filer_pb.ErrNotFound || fEntry == nil {
glog.V(3).InfofCtx(ctx, "mkdir %s: %v", dirPath, mkdirErr)
return fmt.Errorf("mkdir %s: %v", dirPath, mkdirErr)
}
} else {
if !strings.HasPrefix("/"+util.Join(dirParts[:]...), SystemLogDir) {
f.NotifyUpdateEvent(ctx, nil, dirEntry, false, isFromOtherCluster, nil)
}
}
} else if !dirEntry.IsDirectory() {
// S3 allows both "foo/bar" (object) and "foo/bar/xyzzy" (another
// object) to coexist because S3 has a flat key space. Promote the
// existing file to a directory, preserving its content/chunks so
// the original object data remains accessible.
glog.V(2).InfofCtx(ctx, "promoting %s from file to directory for %s", dirPath, entry.FullPath)
dirEntry.Attr.Mode |= os.ModeDir | 0111
if updateErr := f.Store.UpdateEntry(ctx, dirEntry); updateErr != nil {
return fmt.Errorf("promote %s to directory: %v", dirPath, updateErr)
}
f.NotifyUpdateEvent(ctx, nil, dirEntry, false, isFromOtherCluster, nil)
}
return nil
}
// DirectoryAttributes reads what a directory would need to be recreated as it is.
func (f *Filer) DirectoryAttributes(ctx context.Context, dirPath util.FullPath) (attrs empty_folder_cleanup.DirectoryAttributes, err error) {
entry, err := f.FindEntry(ctx, dirPath)
if err != nil {
return attrs, err
}
if entry == nil {
return attrs, filer_pb.ErrNotFound
}
return empty_folder_cleanup.DirectoryAttributes{
// everything but the type bits: Perm() alone would drop setgid, setuid and
// sticky, quietly changing group inheritance and delete semantics
Mode: entry.Mode & (os.ModePerm | os.ModeSetuid | os.ModeSetgid | os.ModeSticky),
Uid: entry.Uid,
Gid: entry.Gid,
UserName: entry.UserName,
GroupNames: entry.GroupNames,
}, nil
}
// EnsureDirectoryEntry recreates dirPath, and any missing ancestor, for entries that
// outlived the directory holding them. dirPath comes back with the attributes it was
// deleted with, so a restore cannot hand back a directory more permissive than the one
// it replaces. It is a no-op when dirPath is already there.
func (f *Filer) EnsureDirectoryEntry(ctx context.Context, dirPath util.FullPath, attrs empty_folder_cleanup.DirectoryAttributes) error {
existing, err := f.FindEntry(ctx, dirPath)
if err != nil && !errors.Is(err, filer_pb.ErrNotFound) {
return err
}
if existing != nil {
return nil
}
holder := &Entry{FullPath: dirPath, Attr: Attr{
Mode: attrs.Mode, Uid: attrs.Uid, Gid: attrs.Gid,
UserName: attrs.UserName, GroupNames: attrs.GroupNames,
}}
dirParts := strings.Split(string(dirPath), "/")
if err := f.ensureParentDirectoryEntry(ctx, holder, dirParts, len(dirParts)-1, false); err != nil {
return err
}
now := time.Now()
dirEntry := &Entry{FullPath: dirPath, Attr: Attr{
Mtime: now, Crtime: now,
Mode: os.ModeDir | attrs.Mode,
Uid: attrs.Uid,
Gid: attrs.Gid,
UserName: attrs.UserName, GroupNames: attrs.GroupNames,
}}
f.ensureEntryInode(dirEntry)
if err := f.Store.InsertEntry(ctx, dirEntry); err != nil {
return fmt.Errorf("restore directory %s: %v", dirPath, err)
}
f.NotifyUpdateEvent(ctx, nil, dirEntry, false, false, nil)
return nil
}
func (f *Filer) UpdateEntry(ctx context.Context, oldEntry, entry *Entry) (err error) {
if oldEntry != nil {
entry.Attr.Crtime = oldEntry.Attr.Crtime
if oldEntry.Attr.Inode != 0 {
// Object identity must not change on in-place updates.
entry.Attr.Inode = oldEntry.Attr.Inode
} else {
f.ensureEntryInode(entry)
}
if oldEntry.IsDirectory() && !entry.IsDirectory() {
glog.ErrorfCtx(ctx, "existing %s is a directory", oldEntry.FullPath)
return fmt.Errorf("%s: %w", oldEntry.FullPath, filer_pb.ErrExistingIsDirectory)
}
if !oldEntry.IsDirectory() && entry.IsDirectory() {
glog.ErrorfCtx(ctx, "existing %s is a file", oldEntry.FullPath)
return fmt.Errorf("%s: %w", oldEntry.FullPath, filer_pb.ErrExistingIsFile)
}
}
if entry.Attr.Atime.IsZero() {
entry.Attr.Atime = entryInitialAtime(entry.Attr)
}
return f.Store.UpdateEntry(ctx, entry)
}
func entryInitialAtime(attr Attr) time.Time {
if !attr.Mtime.IsZero() {
return attr.Mtime
}
return attr.Crtime
}
var (
Root = &Entry{
FullPath: "/",
Attr: Attr{
Mtime: time.Now(),
Crtime: time.Now(),
Mode: os.ModeDir | 0755,
Uid: OS_UID,
Gid: OS_GID,
},
}
)
func (f *Filer) FindEntry(ctx context.Context, p util.FullPath) (entry *Entry, err error) {
if string(p) == "/" {
return Root, nil
}
entry, err = f.Store.FindEntry(ctx, p)
if entry != nil && entry.TtlSec > 0 {
if entry.IsExpireS3Enabled() {
if entry.GetS3ExpireTime().Before(time.Now()) && !entry.IsS3Versioning() {
if delErr := f.doDeleteEntryMetaAndData(ctx, entry, true, false, nil); delErr != nil {
glog.ErrorfCtx(ctx, "FindEntry doDeleteEntryMetaAndData %s failed: %v", entry.FullPath, delErr)
}
return nil, filer_pb.ErrNotFound
}
} else if entry.Crtime.Add(time.Duration(entry.TtlSec) * time.Second).Before(time.Now()) {
f.Store.DeleteOneEntry(ctx, entry)
return nil, filer_pb.ErrNotFound
}
}
if entry == nil && (err == nil || errors.Is(err, filer_pb.ErrNotFound)) {
if lazy, lazyErr := f.maybeLazyFetchFromRemote(ctx, p); lazyErr != nil {
glog.V(1).InfofCtx(ctx, "FindEntry lazy fetch %s: %v", p, lazyErr)
} else if lazy != nil {
return lazy, nil
}
}
return entry, err
}
func (f *Filer) doListDirectoryEntries(ctx context.Context, p util.FullPath, startFileName string, inclusive bool, limit int64, prefix string, eachEntryFunc ListEachEntryFunc) (expiredCount int64, lastFileName string, err error) {
f.maybeLazyListFromRemote(ctx, p)
// Collect expired entries during iteration to avoid deadlock with DB connection pool
var expiredEntries []*Entry
var s3ExpiredEntries []*Entry
var hasValidEntries bool
lastFileName, err = f.Store.ListDirectoryPrefixedEntries(ctx, p, startFileName, inclusive, limit, prefix, func(entry *Entry) (bool, error) {
select {
case <-ctx.Done():
glog.Errorf("Context is done.")
return false, fmt.Errorf("context canceled: %w", ctx.Err())
default:
if entry.TtlSec > 0 {
if entry.IsExpireS3Enabled() {
if entry.GetS3ExpireTime().Before(time.Now()) && !entry.IsS3Versioning() {
// Collect for deletion after iteration completes to avoid DB deadlock
s3ExpiredEntries = append(s3ExpiredEntries, entry)
expiredCount++
return true, nil
}
} else if entry.Crtime.Add(time.Duration(entry.TtlSec) * time.Second).Before(time.Now()) {
// Collect for deletion after iteration completes to avoid DB deadlock
expiredEntries = append(expiredEntries, entry)
expiredCount++
return true, nil
}
}
// Track that we found at least one valid (non-expired) entry
hasValidEntries = true
return eachEntryFunc(entry)
}
})
if err != nil {
return expiredCount, lastFileName, err
}
// Delete expired entries after iteration completes to avoid DB connection deadlock
if len(s3ExpiredEntries) > 0 || len(expiredEntries) > 0 {
for _, entry := range s3ExpiredEntries {
if delErr := f.doDeleteEntryMetaAndData(ctx, entry, true, false, nil); delErr != nil {
glog.ErrorfCtx(ctx, "doListDirectoryEntries doDeleteEntryMetaAndData %s failed: %v", entry.FullPath, delErr)
}
}
for _, entry := range expiredEntries {
if delErr := f.Store.DeleteOneEntry(ctx, entry); delErr != nil {
glog.ErrorfCtx(ctx, "doListDirectoryEntries DeleteOneEntry %s failed: %v", entry.FullPath, delErr)
}
}
// After expiring entries, the directory might be empty.
// Attempt to clean it up and any empty parent directories.
if !hasValidEntries && p != "/" && startFileName == "" {
stopAtPath := util.FullPath(f.DirBucketsPath)
f.DeleteEmptyParentDirectories(ctx, p, stopAtPath)
}
}
return
}
// DeleteEmptyParentDirectories recursively checks and deletes parent directories if they become empty.
// It stops at root "/" or at stopAtPath (if provided).
// This is useful for cleaning up directories after deleting files or expired entries.
//
// IMPORTANT: For safety, dirPath must be under stopAtPath (when stopAtPath is provided).
// This prevents accidental deletion of directories outside the intended scope (e.g., outside bucket paths).
//
// Example usage:
//
// // After deleting /bucket/dir/subdir/file.txt, clean up empty parent directories
// // but stop at the bucket path
// parentPath := util.FullPath("/bucket/dir/subdir")
// filer.DeleteEmptyParentDirectories(ctx, parentPath, util.FullPath("/bucket"))
//
// Example with gRPC client:
//
// if err := pb_filer_client.WithFilerClient(ctx, func(client filer_pb.SeaweedFilerClient) error {
// return filer_pb.Traverse(ctx, filer, parentPath, "", func(entry *filer_pb.Entry) error {
// // Process entries...
// })
// }); err == nil {
// filer.DeleteEmptyParentDirectories(ctx, parentPath, stopPath)
// }
func (f *Filer) DeleteEmptyParentDirectories(ctx context.Context, dirPath util.FullPath, stopAtPath util.FullPath) {
if dirPath == "/" || dirPath == stopAtPath {
return
}
// Safety check: if stopAtPath is provided, dirPath must be under it (root "/" allows everything)
stopStr := string(stopAtPath)
if stopAtPath != "" && stopStr != "/" && !strings.HasPrefix(string(dirPath)+"/", stopStr+"/") {
glog.V(1).InfofCtx(ctx, "DeleteEmptyParentDirectories: %s is not under %s, skipping", dirPath, stopAtPath)
return
}
// Additional safety: prevent deletion of bucket-level directories
// This protects /buckets/mybucket from being deleted even if empty
baseDepth := strings.Count(f.DirBucketsPath, "/")
dirDepth := strings.Count(string(dirPath), "/")
if dirDepth <= baseDepth+1 {
glog.V(2).InfofCtx(ctx, "DeleteEmptyParentDirectories: skipping deletion of bucket-level directory %s", dirPath)
return
}
// Check if directory is empty
isEmpty, err := f.IsDirectoryEmpty(ctx, dirPath)
if err != nil {
glog.V(3).InfofCtx(ctx, "DeleteEmptyParentDirectories: error checking %s: %v", dirPath, err)
return
}
if !isEmpty {
// Directory is not empty, stop checking upward
glog.V(3).InfofCtx(ctx, "DeleteEmptyParentDirectories: directory %s is not empty, stopping cleanup", dirPath)
return
}
// Directory is empty, try to delete it
glog.V(2).InfofCtx(ctx, "DeleteEmptyParentDirectories: deleting empty directory %s", dirPath)
parentDir, _ := dirPath.DirAndName()
if dirEntry, findErr := f.FindEntry(ctx, dirPath); findErr == nil {
if delErr := f.doDeleteEntryMetaAndData(ctx, dirEntry, false, false, nil); delErr == nil {
// Successfully deleted, continue checking upwards
f.DeleteEmptyParentDirectories(ctx, util.FullPath(parentDir), stopAtPath)
} else {
// Failed to delete, stop cleanup
glog.V(3).InfofCtx(ctx, "DeleteEmptyParentDirectories: failed to delete %s: %v", dirPath, delErr)
}
}
}
// IsDirectoryEmpty checks if a directory contains any entries
func (f *Filer) IsDirectoryEmpty(ctx context.Context, dirPath util.FullPath) (bool, error) {
isEmpty := true
_, err := f.Store.ListDirectoryPrefixedEntries(ctx, dirPath, "", true, 1, "", func(entry *Entry) (bool, error) {
isEmpty = false
return false, nil // Stop after first entry
})
return isEmpty, err
}
func (f *Filer) Shutdown() {
close(f.deletionQuit)
if f.EmptyFolderCleaner != nil {
f.EmptyFolderCleaner.Stop()
}
f.LocalMetaLogBuffer.ShutdownLogBuffer()
f.Store.Shutdown()
}
func (f *Filer) GetEntryAttributes(ctx context.Context, p util.FullPath) (map[string][]byte, error) {
entry, err := f.FindEntry(ctx, p)
if err != nil {
return nil, err
}
if entry == nil {
return nil, nil
}
return entry.Extended, nil
}
func (f *Filer) IsDirectoryKeyObject(ctx context.Context, p util.FullPath) (bool, error) {
entry, err := f.FindEntry(ctx, p)
if err != nil {
if errors.Is(err, filer_pb.ErrNotFound) {
return false, nil
}
return false, err
}
if entry == nil {
return false, nil
}
// Mirror filer_pb.Entry.IsDirectoryKeyObject so the cleaner keeps a promoted file's data.
return entry.IsDirectory() && (entry.Mime != "" || len(entry.GetChunks()) > 0 || len(entry.Content) > 0 || entry.IsInRemoteOnly()), nil
}