Files
seaweedfs/weed/command/filer_remote_sync_dir.go
T
Chris LuandDevin 6e8a2cdb14 filer.backup: process metadata events through the concurrent processor (#11951)
* filer.backup: process metadata events through the concurrent processor

Each event was handled inline on the subscription loop, so one
fetch+write at a time capped the stream at a few entries per second and
a busy source kept building lag. Route events through the same
MetadataProcessor filer.sync uses: it fans jobs out behind -concurrency
while serializing same-path and subtree-barrier conflicts, and the
checkpoint now advances on the processor's contiguous watermark via
GetResumeTsNs, with Resubscribe replaying anything a failure pins.
-disableErrorRetry keeps its log-and-skip meaning by returning nil after
logging, since the processor would otherwise pin the checkpoint forever.

* filer.backup: drain in-flight jobs before the stream retry loop reconnects

FollowMetadata returns as soon as the stream ends while admitted jobs keep writing; the next doFilerBackup builds a fresh processor that cannot order its replayed writes against them, so an older upload could finish last and clobber a newer file.

* filer.backup: checkpoint the completed watermark on a ticker and at stream end

The offset callback only fires while events arrive, so work draining on a quiet stream stayed uncheckpointed until the next event and a restart recopied it. Persist the processed watermark every 3s when it advances, and once more after the post-stream drain.

* filer.backup: bound the checkpoint wait before reconnecting

setOffset has no context, so a stalled KvPut would hold persistDone and block the retry loop forever. The persist goroutine now performs the final write itself on stopPersist, and the caller waits at most 30s.

* filer.backup: carry the processed position across retry attempts

A follow attempt that ended with a pinned failure recomputed startFrom on retry, so a -timeAgo window could move past the failed event and skip it. doFilerBackup now returns the failure pin (or processed watermark) and the retry loop clamps startFrom to it.

* filer.backup: resume retries at the previous attempt's pinned position

The retry loop threaded resumeTsNs through but never consulted it, so a
-timeAgo run recomputed startFrom as now-minus-the-window on every attempt
— a failed event older than the window was skipped on reconnect. Use the
pinned position when one exists; -timeAgo and the persisted checkpoint
only choose the first starting point.

Generated with [Devin](https://devin.ai)

Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>

* filer.backup: resume below the failure pin so the failed event replays

The metadata reader treats the resume position as exclusive — events at
or below it are skipped — so resuming at the failed event's own timestamp
would skip it. Back one tick off the pin.

Generated with [Devin](https://devin.ai)

Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>

* filer.backup: label the progress line as the received-event rate

The counter increments when a job is admitted, not when its copy
finishes, so the old wording showed backup throughput during a burst of
slow copies while the processed watermark had not moved.

Generated with [Devin](https://devin.ai)

Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>

* replication: bound the offset checkpoint RPC

setOffset called KvPut on the background context, so a stalled write
could pin a caller's drain or persistence loop indefinitely.

Generated with [Devin](https://devin.ai)

Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>

* filer.backup: keep the resume pin when filer-source setup fails

A retried attempt carries resumeTsNs so the failed event replays from the
same position, but filer-source and SSE initialization failures returned 0,
so the next attempt recomputed -timeAgo and could move the window past the
pinned event.

Generated with [Devin](https://devin.ai)

Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>

* replication: serialize checkpoint writes per key

A checkpoint write can outlive its caller's wait and land beside the next
subscription attempt's writes, moving saved progress backward. Serialize
writes per key inside setOffset and drop any value older than one already
written from this process.

Generated with [Devin](https://devin.ai)

Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>

* filer.backup: gofmt

* replication: serialize checkpoint writes per filer and key

A single process-wide lock made a stalled checkpoint RPC block every
stream's checkpoint, including the opposite direction of a bidirectional
filer.sync. Keeping the last-written watermark per persisted key also let
one stream's offset shadow another stream checkpointing the same key to
a different target filer. Lock and track progress per (filer, key).

* replication: keep the resume position behind a cleared failure pin

A redelivery that clears failedTs lets the processed watermark advance
past the earliest failure, but events dropped while the processor was
stopped — possibly sharing the failure's timestamp — have to replay.
Latched earliestFailedTsNs floors the resume position one tick below
that failure so reconnects still cover them.

Generated with [Devin](https://devin.ai)

Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>

* replication: persist floored checkpoints through the write ordering

setOffset drops a value older than the last written, which also swallows
a deliberate regression: the resume floor, an operator-seeded offset, or
a snapshot high-water mark. allowRegress marks those callers so the
checkpoint can move backward when a failure forces replay.

Generated with [Devin](https://devin.ai)

Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>

* replication: order checkpoint writes by issuance, not value

The value-based stale guard could never fire — every caller passed
allowRegress because floors and seeds are deliberate regressions — and
ordering by value cannot tell a stale high watermark apart from real
progress: a write that outlives its attempt could still land after a
floored resume and skip events owed a replay. Order by issuance instead:
a write issued before the last one to land under the key is dropped, so
late writes from a superseded attempt can no longer move the checkpoint
in either direction while deliberate regressions still apply.

Generated with [Devin](https://devin.ai)

Co-Authored-By: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>

* replication: keep the resume position one tick below the frontier

* remote.sync: resume and persist through the floored watermark

* test: concurrent metadata jobs fan out up to the limit

Distinct-path events must all be in flight before any finishes — a
serial loop could only ever have one running — while the limit still
bounds the pool. Pins the property behind the backup-throughput fix.

---------

Co-authored-by: Devin <158243242+devin-ai-integration[bot]@users.noreply.github.com>
2026-10-23 20:02:55 -07:00

997 lines
43 KiB
Go

package command
import (
"bytes"
"context"
"errors"
"fmt"
"io"
"os"
"strings"
"time"
"github.com/seaweedfs/seaweedfs/weed/s3api/s3_constants"
"github.com/seaweedfs/seaweedfs/weed/filer"
"github.com/seaweedfs/seaweedfs/weed/glog"
"github.com/seaweedfs/seaweedfs/weed/pb"
"github.com/seaweedfs/seaweedfs/weed/pb/filer_pb"
"github.com/seaweedfs/seaweedfs/weed/pb/remote_pb"
"github.com/seaweedfs/seaweedfs/weed/remote_storage"
"github.com/seaweedfs/seaweedfs/weed/replication/source"
"github.com/seaweedfs/seaweedfs/weed/util"
"google.golang.org/grpc"
"google.golang.org/grpc/codes"
"google.golang.org/grpc/status"
"google.golang.org/protobuf/proto"
)
func followUpdatesAndUploadToRemote(option *RemoteSyncOptions, filerSource *source.FilerSource, mountedDir string) error {
// read filer remote storage mount mappings
_, _, remoteStorageMountLocation, remoteStorage, detectErr := filer.DetectMountInfo(option.grpcDialOption, pb.ServerAddress(*option.filerAddress), mountedDir)
if detectErr != nil {
return fmt.Errorf("read mount info: %w", detectErr)
}
eachEntryFunc, err := option.makeEventProcessor(remoteStorage, mountedDir, remoteStorageMountLocation, filerSource)
if err != nil {
return err
}
lastOffsetTs := collectLastSyncOffset(option, option.grpcDialOption, pb.ServerAddress(*option.filerAddress), mountedDir, *option.timeAgo)
processor := NewMetadataProcessor(eachEntryFunc, 128, lastOffsetTs.UnixNano())
var lastLogTsNs = time.Now().UnixNano()
processEventFnWithOffset := pb.AddOffsetFunc(func(resp *filer_pb.SubscribeMetadataResponse) error {
processor.AddSyncJob(resp)
return nil
}, 3*time.Second, func(counter int64, lastTsNs int64) error {
offsetTsNs := processor.processedTsWatermark.Load()
if offsetTsNs == 0 {
return nil
}
// use processor.processedTsWatermark instead of the lastTsNs from the most recent job
now := time.Now().UnixNano()
glog.V(0).Infof("remote sync %s progressed to %v %0.2f/sec", *option.filerAddress, time.Unix(0, offsetTsNs), float64(counter)/(float64(now-lastLogTsNs)/1e9))
lastLogTsNs = now
return remote_storage.SetSyncOffset(option.grpcDialOption, pb.ServerAddress(*option.filerAddress), mountedDir, resumeTsNsFor(processor))
})
option.clientEpoch++
prefix := mountedDir
if !strings.HasSuffix(prefix, "/") {
prefix = prefix + "/"
}
metadataFollowOption := &pb.MetadataFollowOption{
ClientName: "filer.remote.sync",
ClientId: option.clientId,
ClientEpoch: option.clientEpoch,
SelfSignature: 0,
PathPrefix: prefix,
AdditionalPathPrefixes: []string{filer.DirectoryEtcRemote},
DirectoriesToWatch: nil,
StartTsNs: lastOffsetTs.UnixNano(),
StopTsNs: 0,
EventErrorType: pb.RetryForeverOnError,
GetResumeTsNs: func() int64 {
return resumeTsNsFor(processor)
},
Resubscribe: processor.ResubscribeCh(),
}
return pb.FollowMetadata(pb.ServerAddress(*option.filerAddress), option.grpcDialOption, metadataFollowOption, processEventFnWithOffset)
}
func (option *RemoteSyncOptions) makeEventProcessor(remoteStorage *remote_pb.RemoteConf, mountedDir string, remoteStorageMountLocation *remote_pb.RemoteStorageLocation, filerSource *source.FilerSource) (pb.ProcessMetadataFunc, error) {
client, err := remote_storage.GetRemoteStorage(remoteStorage)
if err != nil {
return nil, err
}
handleEtcRemoteChanges := func(resp *filer_pb.SubscribeMetadataResponse) error {
message := resp.EventNotification
if metadataEventUpdatesDirectory(resp, filer.DirectoryEtcRemote) {
if message.NewEntry.Name == filer.REMOTE_STORAGE_MOUNT_FILE {
mappings, readErr := filer.UnmarshalRemoteStorageMappings(message.NewEntry.Content)
if readErr != nil {
return fmt.Errorf("unmarshal mappings: %w", readErr)
}
if remoteLoc, found := mappings.Mappings[mountedDir]; found {
if remoteStorageMountLocation.Bucket != remoteLoc.Bucket || remoteStorageMountLocation.Path != remoteLoc.Path {
glog.Fatalf("Unexpected mount changes %+v => %+v", remoteStorageMountLocation, remoteLoc)
}
} else {
glog.V(0).Infof("unmounted %s exiting ...", mountedDir)
os.Exit(0)
}
}
if message.NewEntry.Name == remoteStorage.Name+filer.REMOTE_STORAGE_CONF_SUFFIX {
conf := &remote_pb.RemoteConf{}
if err := proto.Unmarshal(message.NewEntry.Content, conf); err != nil {
return fmt.Errorf("unmarshal %s/%s: %v", filer.DirectoryEtcRemote, message.NewEntry.Name, err)
}
remoteStorage = conf
if newClient, err := remote_storage.GetRemoteStorage(remoteStorage); err == nil {
client = newClient
} else {
return err
}
}
}
if metadataEventRemovesFromDirectory(resp, filer.DirectoryEtcRemote) &&
message.OldEntry.Name == filer.REMOTE_STORAGE_MOUNT_FILE {
glog.V(0).Infof("unmounted %s exiting ...", mountedDir)
os.Exit(0)
}
return nil
}
eachEntryFunc := func(resp *filer_pb.SubscribeMetadataResponse) error {
message := resp.EventNotification
sourceInEtcRemote, targetInEtcRemote := metadataEventDirectoryMembership(resp, filer.DirectoryEtcRemote)
if sourceInEtcRemote || targetInEtcRemote {
return handleEtcRemoteChanges(resp)
}
if filer_pb.IsEmpty(resp) {
return nil
}
if filer_pb.IsCreate(resp) {
if isMultipartUploadFile(message.NewParentPath, message.NewEntry.Name) {
return nil
}
if isSystemPath(message.NewParentPath, message.NewEntry.Name) {
glog.V(2).Infof("skipping create of system path: %s/%s", message.NewParentPath, message.NewEntry.Name)
return nil
}
// Propagate delete markers as deletions on the remote.
// Delete markers are zero-content version entries, so they
// would be filtered out by the HasData check below.
if isDeleteMarker(message.NewEntry) {
if newParent, newName, ok := rewriteVersionedSourcePath(message.NewParentPath, message.NewEntry.Name); ok {
dest := toRemoteStorageLocation(util.FullPath(mountedDir), util.NewFullPath(newParent, newName), remoteStorageMountLocation)
return syncDeleteMarker(client, option, message, dest)
}
return nil
}
if !filer.HasData(message.NewEntry) {
return nil
}
glog.V(2).Infof("create: %+v", resp)
if !shouldSendToRemote(message.NewEntry) {
glog.V(2).Infof("skipping creating: %+v", resp)
return nil
}
// Rewrite internal versioning paths to the original S3 key
// to prevent double-versioning when central also has versioning enabled
parentPath, entryName := message.NewParentPath, message.NewEntry.Name
isRewrittenVersion := false
if newParent, newName, ok := rewriteVersionedSourcePath(parentPath, entryName); ok {
glog.V(0).Infof("rewrite versioned path %s/%s -> %s/%s", parentPath, entryName, newParent, newName)
parentPath, entryName = newParent, newName
isRewrittenVersion = true
}
dest := toRemoteStorageLocation(util.FullPath(mountedDir), util.NewFullPath(parentPath, entryName), remoteStorageMountLocation)
if message.NewEntry.IsDirectory {
glog.V(0).Infof("mkdir %s", remote_storage.FormatLocation(dest))
return client.WriteDirectory(dest, remoteWriteEntry(message.NewEntry, *option.storageClass))
}
remoteEntry, writeErr := retriedWriteFile(client, filerSource, message.NewParentPath, remoteWriteEntry(message.NewEntry, *option.storageClass), dest)
if errors.Is(writeErr, errSuperseded) {
glog.Errorf("skipping %s: %v", remote_storage.FormatLocation(dest), writeErr)
return nil
}
if writeErr != nil {
return writeErr
}
// Skip updateLocalEntry for versioned rewrites: the logical
// object (e.g. file.xml) has no filer entry in versioned
// buckets, and stamping the internal v_* entry with a
// RemoteEntry for the logical key is semantically wrong.
// Replay is safe because S3 PutObject is idempotent.
if isRewrittenVersion {
return nil
}
return updateLocalEntry(option, message.NewParentPath, message.NewEntry, remoteEntry)
}
if filer_pb.IsDelete(resp) {
return processDeleteEvent(filerSource, client, mountedDir, remoteStorageMountLocation, resp)
}
if message.OldEntry != nil && message.NewEntry != nil {
return processUpdateEvent(option, filerSource, *option.storageClass, client, mountedDir, remoteStorageMountLocation, resp)
}
return nil
}
return eachEntryFunc, nil
}
// processDeleteEvent removes the remote object an entry mapped to. A remote
// object that is already absent counts as deleted: the entry was never
// uploaded (created and deleted faster than the sync ran, or a replay of an
// event the inline delete already handled), and GCS reports that case as
// ErrRemoteObjectNotFound where S3 and Azure answer an idempotent success.
// Returning the error would pin the sync offset on an event that has nothing
// left to do. A file whose path a remote-only entry has taken since keeps its
// object: a rename copied that entry's content to this key, and it exists
// nowhere else.
func processDeleteEvent(
filerSource filer_pb.FilerClient,
client remote_storage.RemoteStorageClient,
mountedDir string,
remoteStorageMountLocation *remote_pb.RemoteStorageLocation,
resp *filer_pb.SubscribeMetadataResponse,
) error {
message := resp.EventNotification
// Skip deletion of internal version files; individual version
// deletes should not propagate to the remote object
if isVersionedPath(resp.Directory, message.OldEntry.Name, message.OldEntry.IsDirectory) {
glog.V(2).Infof("skipping delete of internal version path: %s/%s", resp.Directory, message.OldEntry.Name)
return nil
}
if isSystemPath(resp.Directory, message.OldEntry.Name) {
glog.V(2).Infof("skipping delete of system path: %s/%s", resp.Directory, message.OldEntry.Name)
return nil
}
if filer.IsMetadataOnlyDelete(message.OldEntry) {
glog.V(2).Infof("skipping remote delete of metadata-only delete: %s/%s", resp.Directory, message.OldEntry.Name)
return nil
}
glog.V(2).Infof("delete: %+v", resp)
dest := toRemoteStorageLocation(util.FullPath(mountedDir), util.NewFullPath(resp.Directory, message.OldEntry.Name), remoteStorageMountLocation)
if !message.OldEntry.IsDirectory {
// a deleted entry whose rename copy was still pending read its
// content from the source its marker names, which nothing else
// releases
if err := releasePendingSource(filerSource, client, mountedDir, remoteStorageMountLocation, message.OldEntry); err != nil {
return err
}
current, err := currentEntry(filerSource, resp.Directory, message.OldEntry.Name)
if err != nil {
return err
}
if isRemoteOnly(current) {
glog.V(0).Infof("keep %s: a remote-only entry has taken its path since", remote_storage.FormatLocation(dest))
return nil
}
}
if message.OldEntry.IsDirectory {
glog.V(0).Infof("rmdir %s", remote_storage.FormatLocation(dest))
return client.RemoveDirectory(dest)
}
// The object at the key may have been replaced since the delete: a rename
// copies another entry's content onto it, a rewrite uploads over it, and a
// copy can land before its entry is visible. Delete only an object the
// event's stamp still describes.
glog.V(0).Infof("delete %s", remote_storage.FormatLocation(dest))
return deleteRemoteFileIfUnchanged(client, dest, message.OldEntry.GetRemoteEntry())
}
// releasePendingSource deletes the source a pending-rename marker on entry
// names, once nothing needs it. The filer never deletes a marked source: a
// concurrent rename can copy onto that key before its entry is visible. So
// the object goes only while it is still the one entry's stamp describes, and
// no remote-only entry holds its path.
func releasePendingSource(filerSource filer_pb.FilerClient, client remote_storage.RemoteStorageClient, mountedDir string, remoteStorageMountLocation *remote_pb.RemoteStorageLocation, entry *filer_pb.Entry) error {
src := util.FullPath(entry.GetExtended()[filer.ExtRemoteRenameSourceKey])
if src == "" || !strings.HasPrefix(string(src), strings.TrimSuffix(mountedDir, "/")+"/") {
return nil
}
srcDest := toRemoteStorageLocation(util.FullPath(mountedDir), src, remoteStorageMountLocation)
srcDir, srcName := src.DirAndName()
current, err := currentEntry(filerSource, srcDir, srcName)
if err != nil {
return err
}
if isRemoteOnly(current) {
glog.V(0).Infof("keep %s: a remote-only entry holds the pending rename's source", remote_storage.FormatLocation(srcDest))
return nil
}
glog.V(0).Infof("delete %s, the source of a pending rename", remote_storage.FormatLocation(srcDest))
return deleteRemoteFileIfUnchanged(client, srcDest, entry.GetRemoteEntry())
}
// deleteRemoteFile deletes the object and treats an already-absent object as
// deleted.
func deleteRemoteFile(client remote_storage.RemoteStorageClient, dest *remote_pb.RemoteStorageLocation) error {
if err := client.DeleteFile(dest); err != nil && !errors.Is(err, remote_storage.ErrRemoteObjectNotFound) {
return err
}
return nil
}
// deleteRemoteFileIfUnchanged deletes the object only while it is still the
// one stamp describes. Backends offering a conditional delete bind the check
// and the delete into one preconditioned request; the rest fall back to a
// guarded stat-then-delete.
func deleteRemoteFileIfUnchanged(client remote_storage.RemoteStorageClient, dest *remote_pb.RemoteStorageLocation, stamp *filer_pb.RemoteEntry) error {
if deleter, ok := client.(remote_storage.RemoteStorageConditionalDeleter); ok {
deleted, err := deleter.DeleteFileIfUnchanged(dest, stamp)
if err != nil {
return err
}
if !deleted {
glog.V(0).Infof("keep %s: the object changed since the delete", remote_storage.FormatLocation(dest))
}
return nil
}
live, err := client.StatFile(dest)
if err != nil && !errors.Is(err, remote_storage.ErrRemoteObjectNotFound) {
return err
}
if err == nil && !remote_storage.StillCurrent(stamp, live) {
glog.V(0).Infof("keep %s: the object changed since the delete", remote_storage.FormatLocation(dest))
return nil
}
return deleteRemoteFile(client, dest)
}
func processUpdateEvent(
filerClient filer_pb.FilerClient,
filerSource filer_pb.FilerClient,
storageClass string,
client remote_storage.RemoteStorageClient,
mountedDir string,
remoteStorageMountLocation *remote_pb.RemoteStorageLocation,
resp *filer_pb.SubscribeMetadataResponse,
) error {
message := resp.EventNotification
if isMultipartUploadFile(message.NewParentPath, message.NewEntry.Name) {
return nil
}
if isVersionedPath(message.NewParentPath, message.NewEntry.Name, message.NewEntry.IsDirectory) {
glog.V(2).Infof("skipping update of internal version path: %s/%s", message.NewParentPath, message.NewEntry.Name)
return nil
}
if isSystemPath(message.NewParentPath, message.NewEntry.Name) {
glog.V(2).Infof("skipping update of system path: %s/%s", message.NewParentPath, message.NewEntry.Name)
return nil
}
oldDest := toRemoteStorageLocation(util.FullPath(mountedDir), util.NewFullPath(resp.Directory, message.OldEntry.Name), remoteStorageMountLocation)
dest := toRemoteStorageLocation(util.FullPath(mountedDir), util.NewFullPath(message.NewParentPath, message.NewEntry.Name), remoteStorageMountLocation)
eventSource := renameSource{path: util.NewFullPath(resp.Directory, message.OldEntry.Name), loc: oldDest, stamp: message.OldEntry.GetRemoteEntry()}
// sourceOf is where a remote-only entry's content is: the source its
// pending-rename marker names, which may be an earlier rename's old key,
// or else the event's old key
sourceOf := func(entry *filer_pb.Entry, fallback renameSource) renameSource {
if src := string(entry.Extended[filer.ExtRemoteRenameSourceKey]); strings.HasPrefix(src, strings.TrimSuffix(mountedDir, "/")+"/") {
// a pending entry carries the stamp of the source it reads
return renameSource{path: util.FullPath(src), loc: toRemoteStorageLocation(util.FullPath(mountedDir), util.FullPath(src), remoteStorageMountLocation), stamp: entry.GetRemoteEntry()}
}
return fallback
}
if proto.Equal(oldDest, dest) && !shouldSendToRemote(message.NewEntry) {
glog.V(2).Infof("skipping updating: %+v", resp)
return nil
}
if message.NewEntry.IsDirectory {
return client.WriteDirectory(dest, remoteWriteEntry(message.NewEntry, storageClass))
}
if isMetadataOnlyUpdate(resp.Directory, message) {
remoteEntry, err := liveRemoteEntry(filerClient, message.NewParentPath, message.NewEntry)
if errors.Is(err, filer_pb.ErrNotFound) {
glog.V(2).Infof("skipping updating deleted entry: %+v", resp)
return nil
}
if err != nil {
return err
}
if remoteEntry != nil {
glog.V(2).Infof("update meta: %+v", resp)
updated, err := client.UpdateFileMetadata(dest, message.OldEntry, remoteWriteEntry(message.NewEntry, storageClass))
if err != nil {
return err
}
// a metadata write can rewrite the object (S3 copies it in place
// for a Content-Encoding change, minting a new ETag): restamp from
// the object the update produced when the backend reports it
if updated != nil {
remoteEntry = updated
}
return updateLocalEntry(filerClient, message.NewParentPath, message.NewEntry, remoteEntry)
}
glog.V(0).Infof("never replicated, uploading %s", remote_storage.FormatLocation(dest))
}
if proto.Equal(oldDest, dest) && isDroppedLocalCopy(message.NewEntry) {
// The update dropped the local copy: remote.uncache, eviction under
// storage pressure, or remote.meta.sync pulling a newer remote
// version. Each clears the sync stamp, so shouldSendToRemote reads
// the entry as dirty when the remote mtime shares its second. The
// content is the object at this very key, and uploading the chunkless
// entry would replace it with zero bytes.
glog.V(2).Infof("skipping update of remote-only entry: %+v", resp)
return nil
}
glog.V(2).Infof("update: %+v", resp)
if !proto.Equal(oldDest, dest) {
// A renamed entry that holds no local data now (the snapshot was
// remote-only, or remote.uncache ran since) has its content only as a
// remote object. Remote-only reads resolve by the entry's own path, so
// the rename completes only once the destination object holds it. The
// filer's current state decides, not the snapshot: an entry rewritten
// since the event has local data again, and the rewrite's bytes are
// what the destination must hold.
current, err := currentEntry(filerSource, message.NewParentPath, message.NewEntry.Name)
if err != nil {
return err
}
if isRemoteOnly(current) {
source := sourceOf(current, eventSource)
if err := completeRemoteOnlyRename(filerClient, client, message.NewParentPath, current, source, dest, storageClass); err != nil {
return err
}
// a pending entry the filer copied on this rename leaves the
// source its marker named
if pending := sourceOf(message.OldEntry, renameSource{}); pending.loc != nil && !proto.Equal(pending.loc, source.loc) {
return releasePendingSource(filerSource, client, mountedDir, remoteStorageMountLocation, message.OldEntry)
}
return nil
}
if current == nil && len(message.NewEntry.Extended[filer.ExtRemoteRenameSourceKey]) > 0 {
// the rename's copy was pending and the entry has moved on: a
// later rename carries the source in its own marker and finishes
// or releases it, so this one leaves it
glog.V(0).Infof("keep %s: the pending rename moved on", remote_storage.FormatLocation(oldDest))
return nil
}
glog.V(0).Infof("delete %s", remote_storage.FormatLocation(oldDest))
if err := client.DeleteFile(oldDest); err != nil {
if isMultipartUploadFile(resp.Directory, message.OldEntry.Name) || isSystemPath(resp.Directory, message.OldEntry.Name) {
return nil
}
if !errors.Is(err, remote_storage.ErrRemoteObjectNotFound) {
return err
}
}
}
remoteEntry, writeErr := retriedWriteFile(client, filerSource, message.NewParentPath, remoteWriteEntry(message.NewEntry, storageClass), dest)
if errors.Is(writeErr, errSuperseded) {
glog.Errorf("skipping %s: %v", remote_storage.FormatLocation(dest), writeErr)
if !proto.Equal(oldDest, dest) {
if err := uploadCurrentEntry(filerClient, filerSource, client, message.NewParentPath, message.NewEntry.Name, eventSource, dest, storageClass, sourceOf); err != nil {
return err
}
return releaseRenamedSource(filerSource, client, mountedDir, remoteStorageMountLocation, message)
}
return nil
}
if writeErr != nil {
return writeErr
}
if err := updateLocalEntry(filerClient, message.NewParentPath, message.NewEntry, remoteEntry); err != nil {
return err
}
if !proto.Equal(oldDest, dest) {
return releaseRenamedSource(filerSource, client, mountedDir, remoteStorageMountLocation, message)
}
return nil
}
// releaseRenamedSource releases a pending source the renamed entry's old
// version read, once the destination holds the content on the remote under
// its own key: only after the upload and its stamp, which clears the marker,
// and only if the entry does not read through a marker any more. Released
// earlier, an upload that fails followed by remote.uncache would leave the
// entry reading a deleted source.
func releaseRenamedSource(filerSource filer_pb.FilerClient, client remote_storage.RemoteStorageClient, mountedDir string, remoteStorageMountLocation *remote_pb.RemoteStorageLocation, message *filer_pb.EventNotification) error {
if len(message.OldEntry.GetExtended()[filer.ExtRemoteRenameSourceKey]) == 0 {
return nil
}
current, err := currentEntry(filerSource, message.NewParentPath, message.NewEntry.Name)
if err != nil {
return err
}
if current != nil && len(current.Extended[filer.ExtRemoteRenameSourceKey]) > 0 {
return nil
}
return releasePendingSource(filerSource, client, mountedDir, remoteStorageMountLocation, message.OldEntry)
}
// currentEntry returns what the filer holds at dir/name now, nil when the
// entry is gone.
func currentEntry(filerSource filer_pb.FilerClient, dir, name string) (*filer_pb.Entry, error) {
current, _, _, err := filer_pb.GetEntry(context.Background(), filerSource, util.NewFullPath(dir, name))
if errors.Is(err, filer_pb.ErrNotFound) {
return nil, nil
}
if err != nil {
return nil, err
}
return current, nil
}
// isRemoteOnly reports an entry whose content exists only as its remote
// object: no local data, a RemoteEntry with a size.
func isRemoteOnly(entry *filer_pb.Entry) bool {
return entry != nil && !filer.HasData(entry) && entry.IsInRemoteOnly()
}
// isDroppedLocalCopy reports a remote-only entry whose size is still the
// remote object's: its local copy was dropped and the object describes it.
// Uncache and eviction keep the size, and remote.meta.sync sets it from the
// object. A truncate drops the chunks too but changes the size, and the
// truncated content has to reach the remote.
func isDroppedLocalCopy(entry *filer_pb.Entry) bool {
return isRemoteOnly(entry) && entry.GetAttributes().GetFileSize() == uint64(entry.RemoteEntry.RemoteSize)
}
// completeRemoteOnlyRename finishes a rename whose content exists only on the
// remote. When the destination object already holds what the entry's stamp
// describes (the rename ran before, its offset was not persisted, and
// remote.uncache followed), the old key goes. Otherwise the old object is
// copied over the destination, the entry is stamped with the copy, and the
// old key goes. With neither object present the content is lost: the event
// fails and holds the offset for recovery.
func completeRemoteOnlyRename(filerClient filer_pb.FilerClient, client remote_storage.RemoteStorageClient, dir string, current *filer_pb.Entry, source renameSource, dest *remote_pb.RemoteStorageLocation, storageClass string) error {
oldDest := source.loc
// the source's recorded stamp; a retry can find the entry already
// stamped with the copy, whose ETag a multipart source does not share
sourceStamp := source.stamp
if sourceStamp == nil {
sourceStamp = proto.Clone(current.RemoteEntry).(*filer_pb.RemoteEntry)
}
if existing, err := client.StatFile(dest); err == nil {
if remote_storage.Describes(current.RemoteEntry, existing) {
glog.V(0).Infof("%s already holds the renamed content", remote_storage.FormatLocation(dest))
if len(current.Extended[filer.ExtRemoteRenameSourceKey]) > 0 {
// reads still go to the source until the stamp clears the marker
if err := updateLocalEntry(filerClient, dir, current, existing); err != nil {
return err
}
}
return deleteRenameSource(filerClient, client, dir, current.Name, source, sourceStamp)
}
glog.V(0).Infof("%s holds an object the entry does not describe (size %d, want %d); replacing it from %s", remote_storage.FormatLocation(dest), existing.RemoteSize, current.RemoteEntry.RemoteSize, remote_storage.FormatLocation(oldDest))
} else if !errors.Is(err, remote_storage.ErrRemoteObjectNotFound) {
return err
}
stat, err := client.StatFile(oldDest)
if errors.Is(err, remote_storage.ErrRemoteObjectNotFound) {
return fmt.Errorf("%s: content is on neither %s nor %s", util.NewFullPath(dir, current.Name), remote_storage.FormatLocation(oldDest), remote_storage.FormatLocation(dest))
}
if err != nil {
return err
}
reader, err := openRemoteObject(client, oldDest, stat.RemoteSize)
if err != nil {
return err
}
defer reader.Close()
glog.V(0).Infof("copy %s -> %s", remote_storage.FormatLocation(oldDest), remote_storage.FormatLocation(dest))
remoteEntry, err := client.WriteFile(dest, remoteWriteEntry(current, storageClass), reader)
if err != nil {
return err
}
if err := updateLocalEntry(filerClient, dir, current, remoteEntry); err != nil {
return err
}
return deleteRenameSource(filerClient, client, dir, current.Name, source, sourceStamp)
}
// renameSource is where a renamed remote-only entry's content was read
// from: the path, the object it maps to, and the stamp describing it.
type renameSource struct {
path util.FullPath
loc *remote_pb.RemoteStorageLocation
stamp *filer_pb.RemoteEntry
}
// deleteRenameSource deletes a rename's old key once the renamed entry no
// longer reads it: an entry still carrying the pending-source marker (its
// stamp lost a race) keeps the source, and the event is retried. The key is
// left alone when the object there is no longer the one stamp describes, as
// when another rename copied onto it, visible yet or not.
func deleteRenameSource(filerClient filer_pb.FilerClient, client remote_storage.RemoteStorageClient, dir, name string, source renameSource, stamp *filer_pb.RemoteEntry) error {
current, err := currentEntry(filerClient, dir, name)
if err != nil {
return err
}
if current != nil && len(current.Extended[filer.ExtRemoteRenameSourceKey]) > 0 {
return fmt.Errorf("%s still reads %s", util.NewFullPath(dir, name), remote_storage.FormatLocation(source.loc))
}
if err := deleteRemoteFileIfUnchanged(client, source.loc, stamp); err != nil {
return err
}
return nil
}
// openRemoteObject streams the object when the client can, and reads it whole
// otherwise.
func openRemoteObject(client remote_storage.RemoteStorageClient, loc *remote_pb.RemoteStorageLocation, size int64) (io.ReadCloser, error) {
if streamer, ok := client.(remote_storage.RemoteStorageStreamReader); ok {
return streamer.ReadFileAsStream(context.Background(), loc, 0, size)
}
data, err := client.ReadFile(loc, 0, size)
if err != nil {
return nil, err
}
return io.NopCloser(bytes.NewReader(data)), nil
}
// uploadCurrentEntry uploads what the filer holds at dir/name now, when the
// event that superseded this rename will not. A rename whose snapshot is
// superseded has already deleted the old key; the rewrite behind it in the
// log uploads the destination itself unless shouldSendToRemote skips it on
// the inherited RemoteEntry, whose RemoteMtime can equal the rewrite's mtime
// within the same second. Only that case uploads here, so the content goes
// up once. A remote-only entry is finished the way completeRemoteOnlyRename
// finishes a rename: its stamp can already describe the destination (a sync
// plus remote.uncache in the meantime), and only then is it complete.
func uploadCurrentEntry(filerClient filer_pb.FilerClient, filerSource filer_pb.FilerClient, client remote_storage.RemoteStorageClient, dir, name string, oldSource renameSource, dest *remote_pb.RemoteStorageLocation, storageClass string, sourceOf func(*filer_pb.Entry, renameSource) renameSource) error {
current, _, _, err := filer_pb.GetEntry(context.Background(), filerSource, util.NewFullPath(dir, name))
if errors.Is(err, filer_pb.ErrNotFound) {
return nil
}
if err != nil {
return err
}
if current.IsDirectory {
return nil
}
if isRemoteOnly(current) {
return completeRemoteOnlyRename(filerClient, client, dir, current, sourceOf(current, oldSource), dest, storageClass)
}
if shouldSendToRemote(current) {
glog.V(0).Infof("leaving %s to the rewrite that superseded the rename", remote_storage.FormatLocation(dest))
return nil
}
glog.V(0).Infof("uploading the current %s in place of the superseded rename", remote_storage.FormatLocation(dest))
remoteEntry, writeErr := retriedWriteFile(client, filerSource, dir, remoteWriteEntry(current, storageClass), dest)
if errors.Is(writeErr, errSuperseded) {
glog.Errorf("skipping %s: %v", remote_storage.FormatLocation(dest), writeErr)
return nil
}
if writeErr != nil {
return writeErr
}
return updateLocalEntry(filerClient, dir, current, remoteEntry)
}
// isSuperseded reports whether the filer has moved past the entry an event
// described: it is deleted, or it no longer references every chunk the event
// named. Those are the chunks the filer deletes when an entry is updated, so
// they are gone from the volume servers, or about to be, and no retry of the
// upload can succeed. Chunks are compared by file id, not content: a rewrite
// stores even identical bytes under new ids and drops the old ones. A replay
// from an earlier offset (-timeAgo) re-emits such events. Failing one holds the
// sync offset before it, so every restart of the subscription replays it into
// the same dead chunks, and progress on everything after it in the log is never
// persisted. Skipping is safe: the event that superseded this one follows in
// the log, and the delete removes the remote object or the rewrite uploads the
// current content. A lookup that fails for any other reason keeps the write
// failure, so the event is retried.
func isSuperseded(filerClient filer_pb.FilerClient, dir string, entry *filer_pb.Entry) bool {
current, _, _, err := filer_pb.GetEntry(context.Background(), filerClient, util.NewFullPath(dir, entry.Name))
if errors.Is(err, filer_pb.ErrNotFound) {
return true
}
if err != nil {
return false
}
if !filer.HasData(entry) && filer.HasData(current) {
// The event described an entry without data (remote-only, or empty);
// the filer has written to it since. Uploading the snapshot would put
// an empty object where the write belongs.
return true
}
if len(entry.Content) > 0 || len(current.Content) > 0 {
return !bytes.Equal(entry.Content, current.Content)
}
return len(filer.DoMinusChunks(entry.GetChunks(), current.GetChunks())) > 0
}
// errSuperseded marks an upload that failed for an entry the filer has since
// moved past (isSuperseded). The caller skips the event instead of failing it.
var errSuperseded = errors.New("deleted or rewritten since the event was logged")
// retriedWriteFile uploads the entry, retrying transient failures. The filer is
// asked whether the entry is superseded before the first attempt and after
// every failed one, and the upload stops at once when it is. Before: a backlog
// (a restart resuming from an old offset) carries every intermediate version
// of a hot file, and uploading each one in turn is wasted bandwidth that can
// trip the remote's per-object mutation rate limit; only the version the filer
// still holds is worth sending. After: a dead chunk reads as a transient
// "RequestError" from the SDK, and waiting out the backoff on it buys nothing.
func retriedWriteFile(client remote_storage.RemoteStorageClient, filerSource filer_pb.FilerClient, dir string, newEntry *filer_pb.Entry, dest *remote_pb.RemoteStorageLocation) (remoteEntry *filer_pb.RemoteEntry, err error) {
if isSuperseded(filerSource, dir, newEntry) {
return nil, fmt.Errorf("%s %w", util.NewFullPath(dir, newEntry.Name), errSuperseded)
}
err = util.RetryOnError("writeFile", func(err error) bool {
return !errors.Is(err, errSuperseded) && util.IsTransientError(err)
}, func() error {
reader := filer.NewFileReader(filerSource, newEntry)
glog.V(0).Infof("create %s", remote_storage.FormatLocation(dest))
var writeErr error
remoteEntry, writeErr = client.WriteFile(dest, newEntry, reader)
if writeErr != nil && isSuperseded(filerSource, dir, newEntry) {
return fmt.Errorf("%s %w: %w", util.NewFullPath(dir, newEntry.Name), errSuperseded, writeErr)
}
return writeErr
})
if err != nil && !errors.Is(err, errSuperseded) {
glog.Errorf("write to %s: %v", dest, err)
}
return
}
func collectLastSyncOffset(filerClient filer_pb.FilerClient, grpcDialOption grpc.DialOption, filerAddress pb.ServerAddress, mountedDir string, timeAgo time.Duration) time.Time {
// 1. specified by timeAgo
// 2. last offset timestamp for this directory
// 3. directory creation time
var lastOffsetTs time.Time
if timeAgo == 0 {
mountedDirEntry, _, _, err := filer_pb.GetEntry(context.Background(), filerClient, util.FullPath(mountedDir))
if err != nil {
glog.V(0).Infof("get mounted directory %s: %v", mountedDir, err)
return time.Now()
}
lastOffsetTsNs, err := remote_storage.GetSyncOffset(grpcDialOption, filerAddress, mountedDir)
if mountedDirEntry != nil {
if err == nil && mountedDirEntry.Attributes.Crtime < lastOffsetTsNs/1000000 {
lastOffsetTs = time.Unix(0, lastOffsetTsNs)
glog.V(0).Infof("resume from %v", lastOffsetTs)
} else {
lastOffsetTs = time.Unix(mountedDirEntry.Attributes.Crtime, 0)
}
} else {
lastOffsetTs = time.Now()
}
} else {
lastOffsetTs = time.Now().Add(-timeAgo)
if lastOffsetTsNs, err := remote_storage.GetSyncOffset(grpcDialOption, filerAddress, mountedDir); err == nil && lastOffsetTsNs > 0 {
if savedOffsetTs := time.Unix(0, lastOffsetTsNs); savedOffsetTs.Before(lastOffsetTs) {
lastOffsetTs = savedOffsetTs
}
}
}
return lastOffsetTs
}
func toRemoteStorageLocation(mountDir, sourcePath util.FullPath, remoteMountLocation *remote_pb.RemoteStorageLocation) *remote_pb.RemoteStorageLocation {
source := string(sourcePath[len(mountDir):])
dest := util.FullPath(remoteMountLocation.Path).Child(source)
return &remote_pb.RemoteStorageLocation{
Name: remoteMountLocation.Name,
Bucket: remoteMountLocation.Bucket,
Path: string(dest),
}
}
// isMetadataOnlyUpdate reports whether an update leaves the entry at the same
// path with the same content, so the remote object needs at most its metadata
// rewritten -- provided it is already there, which liveRemoteEntry establishes.
func isMetadataOnlyUpdate(dir string, message *filer_pb.EventNotification) bool {
if dir != message.NewParentPath || message.OldEntry.Name != message.NewEntry.Name {
return false
}
return filer.IsSameData(message.OldEntry, message.NewEntry)
}
// liveRemoteEntry returns the RemoteEntry showing the entry's object is on the
// remote, or nil when it never got there. The event's own is not enough: a
// chmod right after a write is logged before the sync has uploaded the write
// and stamped the entry, and treating it as unreplicated would upload twice.
// Returns filer_pb.ErrNotFound when the entry has since been deleted.
func liveRemoteEntry(filerClient filer_pb.FilerClient, dir string, entry *filer_pb.Entry) (*filer_pb.RemoteEntry, error) {
if entry.RemoteEntry != nil {
return entry.RemoteEntry, nil
}
current, _, _, err := filer_pb.GetEntry(context.Background(), filerClient, util.NewFullPath(dir, entry.Name))
if err != nil {
return nil, err
}
return current.RemoteEntry, nil
}
func shouldSendToRemote(entry *filer_pb.Entry) bool {
if entry.RemoteEntry == nil {
return true
}
if entry.RemoteEntry.RemoteMtime != entry.Attributes.Mtime {
return entry.RemoteEntry.RemoteMtime < entry.Attributes.Mtime
}
// Equal seconds cannot tell a rewrite from the version already
// uploaded; the sync stamp can, the same check remote.uncache uses.
return entry.RemoteEntry.LastLocalSyncTsNs < entry.Attributes.Mtime*1e9+int64(entry.Attributes.MtimeNs)
}
// remoteWriteEntry returns the entry as remote storage should see it: the
// storage class attribute is dropped, or overridden by -storageClass. The
// event entry is left untouched so updateLocalEntry still compares the entry
// the filer stored.
func remoteWriteEntry(entry *filer_pb.Entry, storageClass string) *filer_pb.Entry {
clone := proto.Clone(entry).(*filer_pb.Entry)
if storageClass == "" {
delete(clone.Extended, s3_constants.AmzStorageClass)
} else {
if clone.Extended == nil {
clone.Extended = map[string][]byte{}
}
clone.Extended[s3_constants.AmzStorageClass] = []byte(storageClass)
}
return clone
}
// updateLocalEntry stamps the entry an event described with its RemoteEntry.
// The write carries IF_ENTRY_EQUAL over the event's entry: the filer deletes
// every stored chunk absent from an updated entry, so a snapshot older than
// the live entry (the file was rewritten while its upload was in flight, or
// the event is a replay) would delete the live chunks. A failed precondition
// means the filer moved past this event; the event that superseded it follows
// in the log and stamps the current entry, so the stale stamp is skipped the
// same way a superseded upload is.
func updateLocalEntry(filerClient filer_pb.FilerClient, dir string, entry *filer_pb.Entry, remoteEntry *filer_pb.RemoteEntry) error {
remoteEntry = proto.Clone(remoteEntry).(*filer_pb.RemoteEntry)
remoteEntry.LastLocalSyncTsNs = time.Now().UnixNano()
expected := proto.Clone(entry).(*filer_pb.Entry)
entry.RemoteEntry = remoteEntry
delete(entry.Extended, filer.ExtRemoteRenameSourceKey)
err := filerClient.WithFilerClient(false, func(client filer_pb.SeaweedFilerClient) error {
_, err := client.UpdateEntry(context.Background(), &filer_pb.UpdateEntryRequest{
Directory: dir,
Entry: entry,
Condition: ifEntryEqual(expected),
})
return err
})
if isFailedPrecondition(err) {
glog.Errorf("skipping stale stamp of %s: %v", util.NewFullPath(dir, entry.Name), err)
return nil
}
if isEntryGone(err) {
glog.Errorf("skipping stamp of %s: deleted since the event was logged: %v", util.NewFullPath(dir, entry.Name), err)
return nil
}
return err
}
// isEntryGone reports an UpdateEntry the filer refused because the entry no
// longer exists: a delete that followed the event superseded the stamp, and
// the delete's own event follows in the log. A filer with the typed answer
// returns codes.NotFound; an older filer returns a plain error of the form
// "not found <path>: <cause>", so the cause (the message's tail, never the
// path) is matched against filer_pb.ErrNotFound's text.
func isEntryGone(err error) bool {
if err == nil {
return false
}
if st, ok := status.FromError(err); ok && st.Code() == codes.NotFound {
return true
}
return strings.HasSuffix(strings.TrimSpace(err.Error()), filer_pb.ErrNotFound.Error())
}
// ifEntryEqual builds the precondition that the stored entry still equals the
// one the event described: chunk fids, inline content, and metadata alike.
func ifEntryEqual(entry *filer_pb.Entry) *filer_pb.WriteCondition {
return &filer_pb.WriteCondition{
Clauses: []*filer_pb.WriteCondition_Clause{{Kind: filer_pb.WriteCondition_IF_ENTRY_EQUAL, ExpectedEntry: entry}},
}
}
// isFailedPrecondition reports a write condition the filer refused, through
// any wrapping WithFilerClient added.
func isFailedPrecondition(err error) bool {
if err == nil {
return false
}
st, ok := status.FromError(err)
return ok && st.Code() == codes.FailedPrecondition
}
func isMultipartUploadFile(dir string, name string) bool {
return isMultipartUploadDir(dir) && strings.HasSuffix(name, ".part")
}
func isMultipartUploadDir(dir string) bool {
return strings.HasPrefix(dir, "/buckets/") &&
strings.Contains(dir, "/"+s3_constants.MultipartUploadsFolder+"/")
}
// isSystemPath returns true if the dir and name refer to the internal .system folder
// under /buckets (such as the bucket-owner index at /buckets/.system/owners/...)
// or any entry inside it. These paths are internal to SeaweedFS and must not
// be synced to remote storage.
func isSystemPath(dir string, name string) bool {
fullPath := string(util.NewFullPath(dir, name))
trimmed := strings.Trim(fullPath, "/")
parts := strings.Split(trimmed, "/")
if len(parts) >= 1 && parts[0] == s3_constants.SystemFolder {
return true
}
if len(parts) >= 2 && parts[1] == s3_constants.SystemFolder {
return true
}
return false
}
// isDeleteMarker returns true if the entry is an S3 delete marker
// (a zero-content version entry with ExtDeleteMarkerKey set to "true").
func isDeleteMarker(entry *filer_pb.Entry) bool {
if entry == nil || entry.Extended == nil {
return false
}
return string(entry.Extended[s3_constants.ExtDeleteMarkerKey]) == "true"
}
// syncDeleteMarker propagates a delete marker to the remote storage and
// persists a local sync marker so that replaying the same event is a no-op.
func syncDeleteMarker(
client remote_storage.RemoteStorageClient,
filerClient filer_pb.FilerClient,
message *filer_pb.EventNotification,
dest *remote_pb.RemoteStorageLocation,
) error {
glog.V(0).Infof("delete (marker) %s", remote_storage.FormatLocation(dest))
if err := deleteRemoteFile(client, dest); err != nil {
return err
}
return updateLocalEntry(filerClient, message.NewParentPath, message.NewEntry, &filer_pb.RemoteEntry{
StorageName: dest.Name,
RemoteMtime: message.NewEntry.Attributes.GetMtime(),
})
}
// isVersionedPath returns true if the dir/name refers to an internal
// versioning path (.versions directory or a version file inside it).
// These paths are SeaweedFS-internal and must not be synced to remote
// storage as-is, because the remote S3 endpoint may apply its own
// versioning, leading to double-versioned paths.
//
// For directories: matches only when the entry name ends with the
// VersionsFolder suffix (e.g. "file.xml.versions").
// For files: matches only when the parent directory ends with
// VersionsFolder and the file name has the "v_" prefix used by
// the internal version file naming convention.
func isVersionedPath(dir string, name string, isDir bool) bool {
if !strings.HasPrefix(dir, "/buckets/") {
return false
}
if isDir {
return strings.HasSuffix(name, s3_constants.VersionsFolder)
}
return strings.HasSuffix(dir, s3_constants.VersionsFolder) && strings.HasPrefix(name, "v_")
}
// rewriteVersionedSourcePath rewrites an internal versioning path to the
// original S3 object key. When a file is uploaded to a versioned bucket,
// SeaweedFS stores it internally as:
//
// /buckets/{bucket}/{key}.versions/v_{versionId}
//
// This function strips the ".versions/v_{versionId}" suffix and returns
// the original parent directory and object name, so the remote destination
// points to the logical S3 key rather than the internal version storage path.
//
// Returns (newDir, newName, true) if the path was rewritten, or
// (dir, name, false) if the path is not a versioned path.
func rewriteVersionedSourcePath(dir string, name string) (string, string, bool) {
if !strings.HasPrefix(dir, "/buckets/") {
return dir, name, false
}
if !strings.HasSuffix(dir, s3_constants.VersionsFolder) {
return dir, name, false
}
if !strings.HasPrefix(name, "v_") {
return dir, name, false
}
// dir = "/buckets/bucket/path/to/file.xml.versions"
// name = "v_abc123"
// Original object: dir without ".versions" suffix → "/buckets/bucket/path/to/file.xml"
originalObjectPath := dir[:len(dir)-len(s3_constants.VersionsFolder)]
lastSlash := strings.LastIndex(originalObjectPath, "/")
if lastSlash < 0 {
return dir, name, false
}
newDir := originalObjectPath[:lastSlash]
if lastSlash == 0 {
newDir = "/"
}
return newDir, originalObjectPath[lastSlash+1:], true
}