Intelligent modes: Point of Interest (orbit on the map, live radius and
speed), Follow Me (follows the phone), QuickShots on a boxed subject,
Course Lock / Home Lock, Tripod and Cinematic, a Free hyperlapse, and
Waypoints 2.0 for V2-only aircraft. ActiveTrack gains Spotlight Pro and
Circle. Every mode has a first-use tutorial and stops from the rail.
Waypoints can resume an interrupted mission, change cruise speed in
flight and check terrain clearance (Open-Meteo, on tap).
Settings: units, C1/C2 actions, dual-operator master/slave, HDMI/SDI
output, a link spectrum chart, Wi-Fi name and password, aircraft name,
video cache, battery warning history and pairing, non-smart cell
voltages. Calibration: compass interference meter, per-IMU calibration,
lens infinity focus and a first-manual-focus prompt. Also an RTK chip,
gimbal movement presets and motor tuning, Precision Takeoff gated on the
flight controller, and the precise GEO database's server version.
Built and unit/widget-tested only; nothing has flown yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Vision radar: graded obstacle sectors around the centre of the video,
the nearest distance per side, the obstacle overhead, and BLOCKED on a
side whose sensors cannot see once the motors run. On aircraft with 360°
sensing, sides without their own readings are filled from the
perception ring. The same sectors sit on the attitude ball's rim, turned
by the heading. Settings > Vision gains Display radar chart and the
braking / sensing distances per direction.
On-screen sticks: the rail's STICKS button hands the aircraft to two
stick pads after a slide-to-confirm. The 25 Hz stream runs natively and
sends zeros once Dart's last command is 300 ms old, so a stalled UI
leaves the aircraft hovering. The sticks close when the remote takes
over, on RTH or on landing. They are simulator-only on aircraft with a
remote unless Settings > General > Developer allows real flights; Spark
and Mavic Air on Wi-Fi may fly them for real. Which MSDK axis is forward
in velocity + body mode is coded from DJI's documentation and must be
checked in the simulator first.
AirSense: a banner for manned aircraft at warning level 2 and up, with
distance, direction and ICAO code; the planes on the map; the full list
in a sheet and Settings > Safety; and the aircraft's own avoidance
action with its countdown.
Fly zones: DJI GEO zones around the aircraft (or the phone) on the map
with their height limits, a banner for FlySafe notices and in/near-zone
states, take-off refused in restricted and locked authorization zones,
self-unlock of authorization zones, the aircraft's licences (enable,
sync from the DJI account, remove all; ground only), and the GEO
database version with an update button.
Tested with unit and widget tests and screenshot renders only; nothing
has run on an aircraft or the simulator yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
P7a of the GO 4-parity plan. The rail's GRID button becomes MODES, which
opens a picker of the product's intelligent flight modes with first-use
terms; Waypoints is the first one built.
Waypoints opens on the big map: tap to add waypoints or POIs, long-press
to drag, "+" to insert on a leg, and a point editor for altitude, speed,
heading (route / custom / POI), gimbal (set or aim at POI), camera action
and hover, and turn radius, with a swipe-to-adjust readout. Route settings,
a local mission library and undo sit in a tool column. Start runs the
SafetyGate's pre-start check in the slide-to-confirm dialog, then uploads
and starts; a run panel shows upload and flight progress with Pause,
Resume and Stop.
MissionBridge now listens to the waypoint operator and builds the full V1
mission (per-waypoint headings, turn direction, gimbal pitch, actions).
Not yet run on a simulator or aircraft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The "•••" button now opens a right-side glass sheet over the live view
with Safety, Vision, Remote, Video link, Battery, Gimbal and General
tabs. Each row is a one-line spec bound to a KeyManager key: rows hide
when the aircraft does not support their key, writes show at once and
roll back if refused, and ground-only settings lock in flight.
KeyBridge gains argument-less action keys and converts range and LED
settings values. settings_menu_page.dart is retired.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The new flight screen (lib/ui/fly/fly_screen.dart) is built from layers.
Each readout listens to its own telemetry sub-model, so a 10 Hz tick only
repaints what changed. It adds a status bar with a status chip and tip
marquee, a smart battery bar with land/RTH markers, a camera info strip,
an attitude ball, an H/D/VS/HS/VPS strip, and a minimap that swaps places
with the video when tapped. The HUD is laid out in design pixels and
scaled to phone or tablet inside the safe area.
What the HUD shows depends on the product: dual or multi battery bars,
SSD status, a thermal spot reading, a master/slave RC badge, and Wi-Fi
bars in place of RC/HD. The bridges now report the data for these: the
camera's ssd/thermal groups and the RC's master/slave mode.
The old FlightControlPage can still be opened from Settings > About >
Classic flight screen until the P3 safety flows land. The same tab also
gets a toggle for the performance overlay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
