Vision radar: graded obstacle sectors around the centre of the video,
the nearest distance per side, the obstacle overhead, and BLOCKED on a
side whose sensors cannot see once the motors run. On aircraft with 360°
sensing, sides without their own readings are filled from the
perception ring. The same sectors sit on the attitude ball's rim, turned
by the heading. Settings > Vision gains Display radar chart and the
braking / sensing distances per direction.
On-screen sticks: the rail's STICKS button hands the aircraft to two
stick pads after a slide-to-confirm. The 25 Hz stream runs natively and
sends zeros once Dart's last command is 300 ms old, so a stalled UI
leaves the aircraft hovering. The sticks close when the remote takes
over, on RTH or on landing. They are simulator-only on aircraft with a
remote unless Settings > General > Developer allows real flights; Spark
and Mavic Air on Wi-Fi may fly them for real. Which MSDK axis is forward
in velocity + body mode is coded from DJI's documentation and must be
checked in the simulator first.
AirSense: a banner for manned aircraft at warning level 2 and up, with
distance, direction and ICAO code; the planes on the map; the full list
in a sheet and Settings > Safety; and the aircraft's own avoidance
action with its countdown.
Fly zones: DJI GEO zones around the aircraft (or the phone) on the map
with their height limits, a banner for FlySafe notices and in/near-zone
states, take-off refused in restricted and locked authorization zones,
self-unlock of authorization zones, the aircraft's licences (enable,
sync from the DJI account, remove all; ground only), and the GEO
database version with an update button.
Tested with unit and widget tests and screenshot renders only; nothing
has run on an aircraft or the simulator yet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Routes saved in the Fly App's mission library now sync to a new per-user
routes collection on the API Server, in the WaypointMissionSpec JSON
format. The library pulls on load and pushes on every save and delete,
merges last-writer-wins by updatedAt, keeps unacknowledged deletes as
tombstones, and keeps working offline. Each signed-in account has its
own copy on the device; routes saved while signed out go to the first
account that signs in.
The API Server gets list / get / upsert / delete route endpoints with a
PocketBase migration, and the Web App a read-only Routes view on the
dashboard (rebuilt dist).
Tested against a fake PocketBase and a fake server only; not yet tried
with a real sign-in on the tablet.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Auto-detect: on aircraft that can sense subjects themselves, the
ActiveTrack panel offers Auto-detect; the subjects it finds show as dashed
boxes on the video, and tapping one then GO follows it by its index.
Trace gets a Backward switch (fly ahead of a subject walking towards the
aircraft, obstacle-sensing aircraft only) and TapFly Free a Reset heading
button. Settings > Vision gains Gesture mode and Palm control where the
flight assistant supports them, and the HUD shows when palm control is
flying the aircraft.
The live view used to stretch the feed over the screen. It now fits the
picture to the decoder's own size with black bars, and reports that size,
so the ActiveTrack / TapFly overlays, tap-to-focus / meter and the grid
all map into the picture and ignore taps on the bars.
Not yet run on a simulator or aircraft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
P7b of the GO 4-parity plan. Both modes open from the MODES picker on the
live video, where they take over the touches the camera and gimbal used.
ActiveTrack: drag a box round the subject (or tap it), then GO. The
operator's own box follows on the video, coloured by confidence, with
confirm / reject when it asks and the reason when it cannot follow.
Trace, Profile and Spotlight switch live from the mode panel.
TapFly: tap where to fly, then GO; the aircraft's heading point and any
obstacle bypass show while it flies, and the speed changes live. Forward
only on aircraft without rear sensors; Backward and Free otherwise.
Both go through new SafetyGate checks (flying, P mode, above 2 m, nothing
else in control, battery), start on GO when the check is clean and ask for
the slide when it warns. Stop on the rail and Exit stop them. MissionBridge
now listens to the ActiveTrack and TapFly operators. Not yet run on a
simulator or aircraft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
P7a of the GO 4-parity plan. The rail's GRID button becomes MODES, which
opens a picker of the product's intelligent flight modes with first-use
terms; Waypoints is the first one built.
Waypoints opens on the big map: tap to add waypoints or POIs, long-press
to drag, "+" to insert on a leg, and a point editor for altitude, speed,
heading (route / custom / POI), gimbal (set or aim at POI), camera action
and hover, and turn radius, with a swipe-to-adjust readout. Route settings,
a local mission library and undo sit in a tool column. Start runs the
SafetyGate's pre-start check in the slide-to-confirm dialog, then uploads
and starts; a run panel shows upload and flight progress with Pause,
Resume and Stop.
MissionBridge now listens to the waypoint operator and builds the full V1
mission (per-waypoint headings, turn direction, gimbal pitch, actions).
Not yet run on a simulator or aircraft.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The "•••" button now opens a right-side glass sheet over the live view
with Safety, Vision, Remote, Video link, Battery, Gimbal and General
tabs. Each row is a one-line spec bound to a KeyManager key: rows hide
when the aircraft does not support their key, writes show at once and
roll back if refused, and ground-only settings lock in flight.
KeyBridge gains argument-less action keys and converts range and LED
settings values. settings_menu_page.dart is retired.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Plan P5: a value bubble on the pitch slider while dragging, press-and-drag
on the video as a speed joystick (re-sent at 10 Hz, zero on release), and a
gimbal settings sheet: mode, 30° extension, yaw follow, recenter / face down /
yaw recenter, roll fine-tune, auto calibration and advanced speed/smoothness
rows gated by the gimbal's capability ranges.
GimbalBridge reports mode, trim, calibration and stop/overload state in the
gimbal telemetry group, and getter-only settings in a new gimbalSettings slow
group. The reported-plus-pending overlay moves out of CameraState into a
SettingsOverlay mixin shared by camera and gimbal.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
One settings table in CameraBridge watches every camera value into the
telemetry tick and backs a generic setCameraValue, so the tabbed camera
menu (Exposure / Photo / Video / Other) is built from row specs and the
camera's own capability ranges. Writes show at once and fall back to what
the camera reports. Adds the quick exposure panel (Auto/A/S/M, ISO slider,
shutter and aperture wheels, EV strip, metered EV in M), a new camera
column with record timer and interval/pano progress, a zoom column for
zoom cameras, tap-to-focus / tap-to-meter, and a live histogram.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Take-off, land, RTH, the landing cancel/confirm and Stop now all go
through one SafetyGate (lib/fly/safety_gate.dart). The gate sorts its
preconditions into blockers and warnings: connection, flight state,
battery against the thresholds, IMU warm-up, compass, critical
diagnostics, GPS, home point, SD card and the RTH battery budget. It
checks again right before sending.
The left rail is now a state machine (lib/fly/action_rail_state.dart):
Take-off becomes Land, then Cancel or Confirm landing. RTH becomes
Cancel RTH. A Stop button shows while an intelligent mode is flying.
Moving the aircraft needs a slide-to-confirm dialog, which can offer
Precision Takeoff or set the RTH altitude. A blocked command shows why
and has no slider. When the pilot is more than 30 m from home, RTH asks
whether to return to them or to the original home point.
The HUD gains an error stack. Its cards can be dismissed, it fits the
space it has, and a new warning triggers haptic feedback. It also gets a
smart-RTH countdown banner with Cancel / Go home now, a forced-landing
banner, and an Aircraft Status sheet. The sheet opens from the status
chip and appears before each connection's first take-off. It offers
Calibrate compass/IMU and Format SD.
On the bridge side this adds precisionTakeOff, setHomeLocation, compass
and IMU calibration start/stop, formatStorage, and compass health in the
telemetry tick.
The classic flight screen stays available until the simulator run passes.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
The new flight screen (lib/ui/fly/fly_screen.dart) is built from layers.
Each readout listens to its own telemetry sub-model, so a 10 Hz tick only
repaints what changed. It adds a status bar with a status chip and tip
marquee, a smart battery bar with land/RTH markers, a camera info strip,
an attitude ball, an H/D/VS/HS/VPS strip, and a minimap that swaps places
with the video when tapped. The HUD is laid out in design pixels and
scaled to phone or tablet inside the safe area.
What the HUD shows depends on the product: dual or multi battery bars,
SSD status, a thermal spot reading, a master/slave RC badge, and Wi-Fi
bars in place of RC/HD. The bridges now report the data for these: the
camera's ssd/thermal groups and the RC's master/slave mode.
The old FlightControlPage can still be opened from Settings > About >
Classic flight screen until the P3 safety flows land. The same tab also
gets a toggle for the performance overlay.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
