190ae923a64b2c3e42000d2c05ce36217034022c
9
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 tajniak81andClaude Opus 5
|
a7cab50e06 |
Apprise: a gateway to hand a message to, not a hundred protocols to carry
Apprise is a Python library that speaks 100+ notification services behind one URL grammar — mailto://, tgram://, ntfy://, discord://. None of that is portable to a server that takes no dependencies, and none of it needs to be: caronc/apprise-api wraps the library in HTTP and is meant to run as a container beside us. So the connector carries no notification protocols of its own. It posts a body to an endpoint the operator runs and lets Apprise fan it out, which is also why adding a service later costs nothing here. Targets are addressed one of two ways and configKey is the switch. Stateful means the URLs live on the Apprise server under a key, narrowed by a tag expression, and recipients are then edited there — no credential for any downstream service is ever held in DriverVault. Stateless means the URLs travel with the request, from a secret config field, which is simpler for one destination and worse for ten. A call that names its own key or urls takes that destination alone rather than merging with the configured one: honouring a caller's URLs while still falling back to the configured key would deliver the message somewhere nobody asked for. baseUrl is Required, which no other connector's address is. Toyota, Anker and Greencell leave everything blank at the global layer because the superadmin → org → user cascade exists to fill it in, and a blank there means "let the user choose". There is no cascade behind this one — a notification gateway is infrastructure the operator runs, not an account a driver owns — so nothing further down can supply the address, and a blank is simply a plugin that cannot work. Better to fail at enable than at the first notification nobody sees. Three limits are choices rather than gaps. /add and /del are not implemented: the Apprise config belongs to the operator, we post to it, and a connector that can delete a notification config has a wider blast radius than one that can only send through it. privacy=1 is forced on /json/urls rather than offered as a parameter, so a target listing reads mailto://user:****@host and downstream tokens stay on the Apprise side of the wire. Attachments are remote URLs the Apprise server fetches; multipart upload is the API's own path for files and not ours. Health follows the rule Greencell set. A reachable server whose config holds nothing to notify is degraded, not down: the half we address works and the missing half is the operator's config. Two cases earn their own line — a config key set against a server running with stateful mode disabled can never resolve, and /status answers 417 rather than 500 when Apprise finds a problem with itself, so that is a parsed answer and not a transport failure. A proxy that strips our Accept header gets the same codes back as plain text, which is read rather than called unreadable; an HTML error page from something that is not Apprise is not, and a test pins the difference. Notifications needed a category of their own, and that is the one change outside the plugin: the constant, the tab order in PluginsCard.vue, and the label in all three panel languages. The cost is now written down in the plugins README beside the Descriptor example, since the previous five categories predate anyone having to add a sixth. The plugin's tests run against an apprise-api stand-in built from that project's views.py — both notify paths, the override rules, 204-as-empty against 424-as-failure, and every health branch. builtin_test.go is the other half: the blank-import list in builtin.go is a silent failure mode, since a connector left out of it compiles, passes its own tests, and never appears in the panel. What is not covered is a live instance; there is no Docker on this machine, so the wire contract comes from reading upstream's source rather than from running it, and a smoke test against a real deployment is still worth doing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
340a81b0d6 |
Greencell: the charger on your own broker, not a cloud it never had
The HabuDen has no cloud API to connect to. It is commissioned over Bluetooth in
the Greencell GC app, pointed at an MQTT broker the owner runs, and from then on
publishes there — so the connector is an MQTT client rather than an HTTP one,
and nothing in it reaches Greencell. The wire contract is Home Assistant's own
greencell component and the greencell_client 1.0.3 library beneath it, which is
the only published description of the topics: a BROADCAST on /greencell/broadcast
draws device announcements, and /greencell/evse/{sn}/ carries current in
milliamps, voltage, power under "momentary", the EVSE state, and the access level
chosen in the app.
That meant an MQTT client, and the server takes no dependencies, so internal/mqtt
is hand-rolled the way internal/ocpp's RFC 6455 layer is. It is scoped to what
this connector needs and says so: QoS 0 for everything we send, clean session,
no reconnect — a connection lives for one plugin call, which is exactly how the
manager builds and tears down an instance. Inbound PUBLISH is accepted at QoS 0,
1 and 2 with the acknowledgements each requires, because the QoS of a delivery is
the broker's choice and not ours; an unacknowledged QoS 1 is redelivered forever.
Read-only, and the reason is worth writing down rather than rediscovering. A
device in EXECUTE mode accepts START, STOP, SET_CURRENT and QUERY — but the topic
those go to appears in no source: not Greencell's integration page, not
greencell_client, and Home Assistant ships sensor-only for that same reason.
Publishing to a guessed topic would be a control feature whose failure mode is a
driver believing they stopped a charge. So the access level is reported, and
commandTopic is the seam: an operator who has watched their own broker and found
theirs sets it, and a state read then sends QUERY — the one command a READ-mode
device also honours — instead of waiting out the charger's publish cadence. The
day the topic is public, control is a payload away from the same field.
What the cascade resolves here is a broker, not an account, so host, port, TLS and
credentials resolve together from the highest layer that names a host: an
organization's address paired with a user's password would address a broker with
credentials never meant for it. The serial, the QUERY topic and the listen window
each describe the charger rather than the endpoint, so each resolves on its own.
Two reading rules the tests pin. A phase the device did not report stays nil
rather than zero, because zero amps on a charger is a real measurement — a JSON
null decoding to 0.0 was a live bug until a test caught it — and a partial read
returns with received/complete flags instead of failing, since a device that
publishes some topics on a slower cadence is still worth reading. And a reachable
broker with no charger on it is degraded, not down: the half we configure works
and the missing half is the device. The plugin's end-to-end tests run against an
in-process broker written to the raw wire format, so a bug in the client cannot
hide behind a matching bug in the fixture.
The apps get the third connector card. The panel needed nothing — it renders a
plugin's ConfigFields itself — but the per-user panes are still hand-written per
integration, which is now three near-copies and the argument for the generic
version already noted in the plugins README. The web form splits the broker from
the charger because the server resolves them differently. The phone card is a
declarative config against the shared widget, which gained a number field type, a
degraded state that reads amber rather than red, and a fix for a locked field
that was covering its own displayed value with dots. Twenty keys in three
languages across both apps; Greencell, HabuDen and the literal QUERY join the
proper nouns that stay in English.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
a203414ceb |
Phone App: the garage on the car's own screen
The one place a service badge is worth reading is the car it belongs to, and that is the one place the app could not be opened: Android Auto runs no Flutter engine, so a Flutter app is simply absent from the head unit. The same APK now carries a second face — Car App Library templates the host draws itself, in Kotlin under android/app/src/main/kotlin/com/drivervault/phoneapp/car/. Two screens. The garage lists a car per row with its due badge on the second line, worst first, because the host renders only the first handful of rows and the car this list exists to mention is the overdue one rather than whichever was added first. A tap opens what that car has coming: the odometer, the next service, and the reminders the server holds for it — typed in and auto-derived from documents and the service schedule alike, in the order it sorted them. None of it is a second implementation of the app. VaultStore reads the session the phone signed in with — the active server's base and token — out of shared_preferences' own store, which both halves share, so a server switched on the phone is the server the car reads from with nothing to keep in step; only cc_active_base is new, because an untouched home entry carries no address of its own, its base being kDefaultApiBase, a compile-time define nothing outside Dart can see. CarStrings reads the same assets/i18n files by the same dot paths, so a badge on the head unit is the string format.dart already puts on the phone, in the language the account chose: of the 32 keys the car screens ask for, 28 are keys a phone screen already used, and only carApp.* is theirs. CarFormat is format.dart's twin — same date pattern and number grouping from the account's settings, same worst-of-date-and-km service badge. A new test reads the Kotlin for the keys it looks up and fails if any is missing from a language file, since the analyzer's reach stops at the Dart. It only reads. A screen you cannot type into is a poor place to edit a car and a driver is a poor person to ask, so VaultApi has no write in it to reach for by accident. Three things the README now says out loud. The service is declared IOT, the closest category the library defines for something that is a garage rather than a map or a media player, which matters to a store submission and not to a sideload. The app lock does not reach the head unit: the flag is in memory and the credentials behind it in encrypted storage, neither readable from the car service, and there is no fingerprint reader in a dashboard to satisfy it with. And the home charger is not on there — the chargers endpoint relays its plugin's payload verbatim with no shape to read, and the serial the control card is driven by is never persisted, so the car would have nothing to name. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
12ec10a797 |
Phone App: more than one server, and a session for each
The web app can be pointed at two DriverVault stacks and switch between them in a click. The phone had one address and one session: reaching a second garage meant retyping the API base in Server settings and signing in again, losing the first server's token on the way — the same act, undone, every time you switched back. So lib/servers.dart is the web's servers.js ported rather than reinvented, down to the storage keys: cc_servers holds the list, cc_active_server the one being read, cc_session_<id> the token minted by that server and no other. The two apps describe the same thing the same way, and the upgrade path falls out of it — cc_token, cc_user and cc_server_url are read once at boot and folded onto the home entry, so the build carrying this signs nobody out. Home is the address the build ships with (kDefaultApiBase, still overridable per device from the login screen) and cannot be removed: it is what a dropped session falls back to. Any other server is added by address, with /api appended if the path is left off, because a server a phone can reach is internet-facing already. The part worth reading twice is which session a rejection ends. ApiClient no longer holds a base or a token — it pins the active server's id, base and token at the moment a request goes out, so a 401 arriving after a switch clears the session of the server that actually refused it rather than whichever one is active by then. The fallback is the web's: a remote server timing out drops its own token, the app returns to home while home is still signed in, and only when nothing is left to fall back to does the login screen come back. Log out still clears every server at once, since leaving the app means leaving all of them. Switching rebuilds the shell, keyed on the active id, because record ids belong to the server that issued them — a garage, a charging page and a settings panel still holding the other server's rows would each have to be told to forget them separately. The appearance prefs come across with the profile of whoever owns the account on the server now active. Where the picker lives is the one place the phone cannot copy the web. There is no app rail here, so it became the first button in the Garage header, beside the theme toggle and log out, which is that same cluster. It names the active server once there is a choice and goes straight to adding the second when there isn't; the eyebrow reads GARAGE · Work for the reason the rail names it — two garages otherwise look identical. The login screen gets its own way in, because a remote session can expire and land you there with that server still active, and a picker reachable only from inside the app would leave nowhere to go. One judgment call inside the sheet: saving a connected server at a new address saves and stops, rather than falling through to the sign-in it now needs. The token was minted by the PocketBase behind the old address and is dropped with it, but the credentials to replace it were never asked for, so treating the save as a login would report an empty password as the error. The strings are copied out of Web App/web/src/i18n/ like the rest of the shared wording. Two are not the web's: home reads "the address this app ships with" rather than "served with this app", since the phone has no origin to be served from, and sameOrigin has no meaning here at all and was dropped. Biometric sign-in stays global. It was never per-server and replays its stored credentials against whichever server is active; making it per-server is a change of its own, and the login screen now names the server it is about to sign into. Nothing changes on the API Server. On Android there is no origin to allow, so the CORS list the web app has to satisfy to reach a second server doesn't enter into it. Verified: flutter analyze is clean and flutter test passes, 35 tests to 46. The new ones cover the registry — a bare origin gaining its /api, a fresh install knowing one unnamed server on the built-in address, the legacy keys landing on home and being cleared, two servers holding their tokens apart, a rename keeping a session where a move drops it, removing the active server falling back to a home that is still signed in, home refusing to be removed, and a restart reading the list, the active id and every session back. Not verified: none of it has been run. There is no device or emulator on this machine and no API Server to answer, so the picker, the add sheet, a real connect, the 401 fallback and the shell rebuild on a switch exist only as code the analyzer is happy with — the tests reach the registry, not a screen. No APK was built. The legacy migration was exercised against mocked SharedPreferences, which is not a phone that had the old build on it: that is the first thing to check on a device, since the failure mode is a silent sign-out. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
6b7abb4b84 |
Phone App: a service card laid out by the car's own columns
The Service history columns became a property of the car two commits ago, and
the phone was left out of it on the grounds that it has no table to arrange.
But the arrangement is not the table's — it belongs to the car, and everyone it
is shared with sees it. A reader who switched Oil off on the web still had it
on every card here, which makes the setting look broken rather than absent.
A card is not a table, so the columns cannot be cells. Consecutive short ones
share a wrapping line, which flows left to right and then down and so keeps the
arrangement intact; the parts, the notes and the file each take a line of their
own. That means the grouping follows the car's order rather than the
catalogue's — move Notes between Km and Next date and the short columns split
around it — which is the part a hand-written card gets wrong by collecting the
short columns first and appending the blocks after them, quietly undoing the
arrangement it was asked to honour. serviceColumnRuns is a function for exactly
that reason: it is the piece worth a test.
The date carries no heading where every other column does. A card list is read
down its dates, and "Date" in front of one says nothing the date doesn't — the
same judgment the server makes by refusing to hide it. It is offered in the
picker anyway, ticked and locked, because a row missing from that list is a row
nothing on this screen can drag; the web drags the column headings themselves,
which on a touch screen is the scroll's gesture. A column that is on but empty
says so ("Notes —") rather than vanishing: it was switched on deliberately, and
a card that silently drops it reads as a record that failed to load.
Changed parts arrives with it. Every part shares the one column — they are a
growing list and a column apiece would widen the web's table without end — and
lib/service_parts.dart is the twin of the web's lib/serviceParts.js, so the
form's checkboxes and the card's chips come from one list and adding a part is
one entry plus its boolean on service_records. The chips keep their own shorter
wording; the form keeps the web's, which is what stops the two apps naming the
same part differently.
Verified: flutter analyze is clean and flutter test passes, 22 tests to 32 —
the new ones cover that the arrangeable set is the hideable one plus the date,
that a field key is not a column key, that adding a part adds no column, the
run grouping, and a widget test of the picker showing the date's is the only
locked checkbox. The screen itself was driven against a throwaway stub API: a
default car renders date, Km, Next date, Next km, chips, notes and file in that
order, and a car hiding km and file with the order [notes, date, nextKm, parts,
km, nextDate] rendered exactly that — notes first, both hidden columns gone, the
short columns split around the chips. updateCarView round-trips both new fields
under the names records.go decodes.
Not verified: the picker's own Save button — the tap landed in the harness but
the request never reached the stub, which reads as the fire-and-forget future
being cut off at teardown, since the same call made directly worked. Drag was
exercised through the reorder callback, not by a finger. Nothing here needs the
API Server to change: both fields already ship, and a phone running against an
older one simply reads empty lists and shows every column.
Two commits needed nothing: the web's masked date box answers <input
type="date"> rendering in the browser's locale, which a picker-only field
cannot have, and the garage card's width answers a badge that wrapped, which
this badge cannot. car.services.next goes, its prose replaced by the columns
that now say it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
dc6febf815 |
Phone App: finish the admin screen; translate the last English strings
Three loose ends from the last two commits, each of which was named as deliberately-not-done and none of which is worth carrying further. The phone's create-user sheet had no organization picker. The endpoint has taken an `organization` since orgs existed and the Web App has offered the choice all along, so a superadmin on the phone could only ever create accounts in their own org - a silent restriction rather than a stated one. The sheet now loads the orgs and offers them to a superadmin, with the same blank "no organization" option and the same hint as the web. An admin still gets no picker, because the server forces its own org on their members and a picker that cannot change the outcome is a lie. The listing is manager-only and can fail, in which case the picker offers only "no organization" rather than blocking the form. A locked role picker or delete action was greyed out with no reason given. The web has explained itself in a title attribute since those guards existed, and the sentences - admin.cantChangeOwnRole and the rest - have been sitting translated in the phone's own language files since the screen was translated. Hover has no touch equivalent, so the two controls take different routes: a long-press on the role picker shows the reason as a tooltip, and the overflow menu carries it under the action, because a disabled menu item cannot be long-pressed and silently greying it out is the thing being fixed. settings.integrations.* and charging.control.* were English-only in *both* apps - 70 keys, identical text, identical key sets - so they are translated once and land in all four language files. OCPP and CSMS are protocol names and stay; product names (Toyota Connected, MyToyota, Anker Solix, Lexus) stay; everything else follows the wording already in each language's file. The Web App's files are edited as text rather than round-tripped through a JSON dump, because they keep a blank line before every nested block and a dump flattens it - a 900-line translation file is hard enough to read without losing its paragraphs. Both diffs are purely additive as a result. Both apps now have every key in all three languages: 738 in the web, and the phone reports zero fallbacks. A new test locks that in - every key en.json carries must exist in pl.json and da.json - and it was checked by deleting a key and watching it fail, because a guard that cannot fire is not a guard. Verified by flutter analyze (clean), flutter test - 21 pass, 1 of them new - flutter build apk --debug, and npm run build for the Web App. The key checker reports 575 static t() keys in the phone and 738 in the web resolving with no fallbacks in either language. Not verified: still nothing run against a live API Server or on a device. In particular the organization picker's happy path - a superadmin creating an account into a chosen org - has not been exercised end to end; it is the one piece here that touches the API rather than only the language files. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
4372b870ac |
Phone App: take the admin users screen off hardcoded English
The last screen the phone rendered in English regardless of the language
picker. Its strings are the web AdminUsers.vue's, which have been translated
since
|
||
|
tajniak81andClaude Opus 5
|
a2d9efec7e |
Phone App: take the car screen off hardcoded English
The previous commit left the car screen half translated: its tab labels went
through t(), and everything underneath them did not. A Polish user opening a
car got translated tabs over English tiles, English forms and English
dialogs, which is worse than either extreme because it reads as a bug rather
than as a missing translation.
So the whole screen and everything it opens now reads from the language
files: the record tiles, the share and delete-car dialogs, the service and
part sheets it hosts, record_form_sheets.dart, car_form_sheet.dart, and the
attachment field whose buttons surface inside all of them.
Almost none of these strings are new. The Web App has said all of this in
three languages since
|
||
|
tajniak81andClaude Opus 4.8
|
b6bb6b1df0 |
Add a language-switch system with per-language files
Introduce a hand-rolled i18n layer across all three UIs, each reading its
text from per-language JSON files (English base + Polish + Danish). Nothing
in the converted screens hardcodes English any more.
- Web App (Vue): src/i18n/{en,pl,da}.json + index.js exposing t()/tSplit(),
reactive to the signed-in profile locale. Every view, component, form and
the status labels in lib/format.js go through t().
- API Server panel (Vue): src/i18n/ with its own localStorage-persisted
language (the panel has no user profile) and a header language picker.
Chrome, cards, login and API section titles translated; endpoint reference
descriptions intentionally kept in English. Rebuilt embedded dist.
- Phone App (Flutter): assets/i18n/ + lib/i18n.dart loaded at startup,
driven by AppSettings.locale. Nav, login, lock, dashboard, the full
Settings panel (incl. language picker) and format.dart status labels
translated; remaining detail screens fall back to English.
Language = the language half of the existing BCP-47 locale; the region half
still drives date/number/currency formatting. Missing keys fall back to
English, and plurals use Intl.PluralRules / Intl.plural so Polish gets the
correct one/few/many forms. Settings flags languages without a translation.
Tests updated to assert the localized (Polish) status wording; all pass.
See TRANSLATIONS.md for the format and how to add a language.
Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com>
|