tajniak81andClaude Opus 5
9a2a4ab72e
Every attachment — a document scan, a fuel receipt, a workshop invoice, a
photo of a part's box — has lived inside pb_data, in a directory beside the
SQLite file. One volume held both, so neither could be sized, backed up or
moved without the other. PocketBase can keep those bytes in an S3 bucket
instead, and now it is told to.
Nothing on the way to a client changes, because an attachment was never a
storage URL to begin with: it is fetched from GET /api/{records}/{id}/file,
which re-checks car access and asks PocketBase for the bytes as the service
account. PocketBase streams from the bucket through that same endpoint rather
than redirecting to it, so the web app, the phone and the plugin cannot tell
which side of the switch they are on.
The bootstrap that already creates the collections now writes PocketBase's
files-storage settings too, from PB_S3_*, on every boot and only when they
differ from what is already there — then asks PocketBase to prove it can reach
the bucket, and says so in the log either way. Two asymmetries are deliberate.
A read of the settings masks the stored secret, so a rotation of the secret
alone is invisible from here and needs another PB_S3_* to move with it. And it
never turns S3 back off: files already written to a bucket are reachable only
while PocketBase still points at it, so dropping the configuration would strand
them rather than undo anything.
Each deployment shape is one compose file with an .env example of the same
name, not a base plus an overlay to remember — six of each per folder, for
Docker and Docker-AIO alike: the plain one, .seaweedfs, .s3, and the three prod
twins. The SeaweedFS files run master, volume, filer and gateway as one process
and a one-shot init container beside it, because PocketBase never issues a
CreateBucket and SeaweedFS will not conjure one on first upload. The credentials
do double duty there — the gateway's only identity is also what PocketBase
authenticates with. In the all-in-one that gateway is a second container rather
than a fourth process under supervisord: keeping the object store inside the
image, on the volume the files are being moved off, would have defeated the
point and would have meant rebuilding.
Files uploaded before the switch are not carried across; PocketBase copies
nothing, and both READMEs say so where an operator will read it.
The TLS overlay and its Caddyfile go. The section they served stays, without
them: nothing in the stack terminates TLS any more, so it now names the four
variables to set in front of whichever proxy already does — TRUST_FORWARDED_PROTO
being the one that decides whether a charger is believed about how it arrived.
Unexercised: this was written on a machine without Docker, so the pinned
SeaweedFS image, the bucket-create and the settings write have not been run
against a live stack. The Go side builds, vets and tests clean.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
156 lines
8.0 KiB
YAML
156 lines
8.0 KiB
YAML
name: drivervault-aio
|
|
|
|
# Production all-in-one, with SeaweedFS — pulls the prebuilt image from the
|
|
# registry instead of building. Self-contained: one file, no overlays.
|
|
# Everything an operator needs to set lives in .env.
|
|
#
|
|
# 1. cp .env.prod.seaweedfs.example .env (then edit it)
|
|
# 2. docker compose -f docker-compose.prod.seaweedfs.yml pull
|
|
# 3. docker compose -f docker-compose.prod.seaweedfs.yml up -d
|
|
#
|
|
# This is docker-compose.prod.yml plus an S3 object store: PocketBase keeps its
|
|
# record files — document scans, service and refill receipts, workshop invoices,
|
|
# part photos — in a SeaweedFS bucket instead of on the pb_data volume next to
|
|
# the database. The database and PocketBase's own backups stay on PB_DATA.
|
|
# Clients cannot tell the difference: an attachment has always been fetched
|
|
# through the API Server, never from a storage URL.
|
|
#
|
|
# SeaweedFS runs as a second container beside the all-in-one, not as a fourth
|
|
# process inside it: keeping the object store in that image, on the volume the
|
|
# files are being moved off, would defeat the point and would mean rebuilding.
|
|
#
|
|
# Before turning this on for a stack that already has uploads: PocketBase does
|
|
# NOT copy existing files into the bucket. See README.md.
|
|
#
|
|
# On first boot PocketBase upserts the superuser from PB_ADMIN_*, and the API
|
|
# Server creates any missing collections and the DriverVault super-admin from
|
|
# DRIVERVAULT_SUPERADMIN_*. Both steps are idempotent.
|
|
|
|
services:
|
|
seaweedfs:
|
|
image: "${SEAWEED_IMAGE:-chrislusf/seaweedfs:4.45}"
|
|
container_name: drivervault-aio-seaweedfs
|
|
restart: unless-stopped
|
|
# One process, four roles: master, volume, filer and the S3 gateway. -dir is
|
|
# the only state it keeps.
|
|
command: server -dir=/data -s3 -master.volumeSizeLimitMB=1024
|
|
environment:
|
|
# SeaweedFS falls back to these when started without an -s3.config file,
|
|
# and configuring one identity is what takes the S3 gateway out of its
|
|
# default allow-anyone mode. The same credentials PocketBase authenticates
|
|
# with below — one pair to set, in .env.
|
|
AWS_ACCESS_KEY_ID: "${PB_S3_ACCESS_KEY:?set PB_S3_ACCESS_KEY in .env}"
|
|
AWS_SECRET_ACCESS_KEY: "${PB_S3_SECRET:?set PB_S3_SECRET in .env}"
|
|
volumes:
|
|
# Named volume by default; set SEAWEED_DATA to a host path in .env for a
|
|
# bind mount, exactly as PB_DATA works. Back it up alongside PB_DATA —
|
|
# from here on the attachments live here, not in the database volume.
|
|
- "${SEAWEED_DATA:-seaweed_data}:/data"
|
|
ports:
|
|
# Loopback only: the stack reaches the gateway over the compose network,
|
|
# so this is here for `aws s3 ls --endpoint-url http://127.0.0.1:8333` and
|
|
# nothing else. Set SEAWEED_S3_BIND=0.0.0.0 to expose it, and mean it.
|
|
- "${SEAWEED_S3_BIND:-127.0.0.1}:${SEAWEED_S3_PORT:-8333}:8333"
|
|
healthcheck:
|
|
test: ["CMD-SHELL", "wget -qO- http://127.0.0.1:9333/cluster/status || exit 1"]
|
|
interval: 10s
|
|
timeout: 3s
|
|
retries: 12
|
|
start_period: 20s
|
|
|
|
seaweedfs-init:
|
|
image: "${SEAWEED_IMAGE:-chrislusf/seaweedfs:4.45}"
|
|
container_name: drivervault-aio-seaweedfs-init
|
|
# Runs once and exits. PocketBase never issues a CreateBucket of its own and
|
|
# SeaweedFS will not conjure one on first upload, so something has to.
|
|
# Creating a bucket that already exists is a no-op, so every later boot
|
|
# passes straight through.
|
|
restart: "no"
|
|
depends_on:
|
|
seaweedfs:
|
|
condition: service_healthy
|
|
entrypoint: ["/bin/sh", "-c"]
|
|
# `|| true` so a restart is never blocked by the shell's exit status: this
|
|
# step is best-effort, and a gateway that is genuinely unreachable is
|
|
# reported by the API Server's own S3 check at boot, with the reason.
|
|
command:
|
|
- 'echo "s3.bucket.create -name ${PB_S3_BUCKET:-drivervault}" | weed shell -master=seaweedfs:9333 || true'
|
|
|
|
drivervault:
|
|
image: "${AIO_IMAGE:-10.2.1.10:5500/admin/drivervault-aio:latest}"
|
|
container_name: drivervault-aio
|
|
restart: unless-stopped
|
|
depends_on:
|
|
# PocketBase — inside this container — is the process that reads and
|
|
# writes the objects, so the gateway has to be serving first, and the
|
|
# bucket has to exist before the bootstrap points PocketBase at it.
|
|
seaweedfs:
|
|
condition: service_healthy
|
|
seaweedfs-init:
|
|
condition: service_completed_successfully
|
|
environment:
|
|
# Superuser (also used by the API Server to authenticate to PocketBase).
|
|
PB_ADMIN_EMAIL: "${PB_ADMIN_EMAIL:?set PB_ADMIN_EMAIL in .env}"
|
|
PB_ADMIN_PASSWORD: "${PB_ADMIN_PASSWORD:?set PB_ADMIN_PASSWORD in .env}"
|
|
# Match CORS to the web origin (only used if a browser calls the API directly).
|
|
CORS_ALLOW_ORIGINS: "${CORS_ALLOW_ORIGINS:-http://localhost:8090}"
|
|
# Probed by the panel status page. nginx serves the Web App on port 80
|
|
# inside this container, so plain localhost:8090 would never answer.
|
|
# Override WEBAPP_URL in .env to make a change from the panel's Web App
|
|
# screen permanent; the panel alone only holds it for the container's life.
|
|
WEBAPP_URL: "${WEBAPP_URL:-http://127.0.0.1:80}"
|
|
# Schema + super-admin bootstrap (idempotent). Leave this ON: a release can
|
|
# add collections or fields the server needs, and a stack that skips the
|
|
# bootstrap never gets them. The API Server self-heals exactly one thing —
|
|
# app_settings, the collection holding the plugin settings, which it
|
|
# creates on demand because it cannot serve the plugin panel without it.
|
|
# Every other schema change still depends on this flag. Turn it off only
|
|
# for a database you know already matches the release.
|
|
PB_BOOTSTRAP: "${PB_BOOTSTRAP:-true}"
|
|
DRIVERVAULT_SUPERADMIN_EMAIL: "${DRIVERVAULT_SUPERADMIN_EMAIL:-}"
|
|
DRIVERVAULT_SUPERADMIN_PASSWORD: "${DRIVERVAULT_SUPERADMIN_PASSWORD:-}"
|
|
DRIVERVAULT_SUPERADMIN_NAME: "${DRIVERVAULT_SUPERADMIN_NAME:-Administrator}"
|
|
# OCPP charger control (Anker Solix). This image serves plain HTTP, so a
|
|
# charger can only connect when TLS is terminated in front of it (set
|
|
# OCPP_PUBLIC_URL to the public wss:// base) — or, on a trusted network,
|
|
# with OCPP_REQUIRE_TLS=false.
|
|
OCPP_REQUIRE_TLS: "${OCPP_REQUIRE_TLS:-true}"
|
|
OCPP_PUBLIC_URL: "${OCPP_PUBLIC_URL:-}"
|
|
# --- File storage --------------------------------------------------
|
|
# supervisord passes these through to the API Server, whose bootstrap
|
|
# writes them into PocketBase's
|
|
# settings on every boot, idempotently. Only record files move — scans,
|
|
# receipts, invoices, part photos. The database and PocketBase's own
|
|
# backups stay on PB_DATA.
|
|
PB_S3_ENABLED: "true"
|
|
PB_S3_BUCKET: "${PB_S3_BUCKET:-drivervault}"
|
|
# The service name: a server-to-server call inside the compose network.
|
|
PB_S3_ENDPOINT: "http://seaweedfs:8333"
|
|
# SeaweedFS ignores the region; PocketBase insists on having one.
|
|
PB_S3_REGION: "${PB_S3_REGION:-us-east-1}"
|
|
PB_S3_ACCESS_KEY: "${PB_S3_ACCESS_KEY}"
|
|
PB_S3_SECRET: "${PB_S3_SECRET}"
|
|
# Path style, because a self-hosted gateway has no per-bucket DNS.
|
|
PB_S3_FORCE_PATH_STYLE: "true"
|
|
ports:
|
|
- "${WEB_PORT:-8090}:80" # Web App
|
|
- "${PB_PORT:-8070}:8070" # PocketBase admin UI / API
|
|
- "${API_PORT:-8080}:8080" # API Server + panel (root /) + /ocpp/{serial}
|
|
volumes:
|
|
# The only volume — named by default; set PB_DATA to a host path in .env
|
|
# for a bind mount. The API Server keeps no state on disk, so everything
|
|
# it owns (plugin settings included) is in here.
|
|
- "${PB_DATA:-pb_data}:/pb/pb_data"
|
|
healthcheck:
|
|
# All three processes must answer. Declared here as well as in the image so
|
|
# the check is visible, and works against an older pulled image.
|
|
test: ["CMD-SHELL", "wget -qO- http://127.0.0.1:8070/api/health >/dev/null && wget -qO- http://127.0.0.1:8080/healthz >/dev/null && wget -qO- http://127.0.0.1:80/healthz >/dev/null || exit 1"]
|
|
interval: 30s
|
|
timeout: 5s
|
|
retries: 3
|
|
start_period: 60s
|
|
|
|
volumes:
|
|
pb_data:
|
|
seaweed_data:
|