b60d929ed684604dada1dc18a9a190486e3efe97
9
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 tajniak81andClaude Opus 5
|
b60d929ed6 |
Service history: columns you can switch off and rearrange
A car's page has let you choose and arrange two things for a while - which tabs
it shows, and which rows the Information tab lists, both dragged into whatever
order you like. The Service history table was left out of that: nine columns,
hardcoded, in one order, for every car. An EV shows Oil & Oil filter and Engine
air filter on every row of a history that will never record either, and a reader
who mostly wants Notes has to look past four columns of dates and distances to
reach it.
It works the way the other two do, because a third mechanism for the same idea
would be one to keep in step. Both lists are properties of the car, so everyone
it is shared with sees the same table, and both need write access to set. The
columns are stored as the hidden set rather than the visible one, so a column
added in a later release is on by default. The arrangement covers the hidden
columns too, which is what makes a column switched back on return to where it
was instead of reappearing at the end - verified below, since that is the part
of this shape that is easy to get wrong and invisible until somebody hits it.
Date cannot be switched off. Every row of that table is work done on a day, and
a history with the day taken out stops being a history; it can still be dragged
anywhere, which is exactly the rule Information already follows in the tab bar.
That is a judgment call and the annotation that prompted this only circled the
other eight columns - moving "date" into hideableServiceColumns and dropping the
filter in the picker would reverse it in two lines if it turns out to be wrong.
Server: hidden_service_columns and service_column_order on the car, validated
against their own key sets by the endpoint that already does this for tabs,
fields and readings. The arrangeable set is derived from the hideable one plus
the date rather than written out again, so the two cannot drift as columns are
added. Bootstrap appends missing fields to existing collections, so the two
columns appear on the next server start with no migration to run.
Web: the table stopped being nine hardcoded th/td pairs and is now driven by one
list of columns, head and body from the same source, which is what stops a moved
or hidden column from shifting the headings out of line with the cells. The
cells are built a row at a time rather than a call per cell, so a long history
doesn't rebuild every cell three times to read its text, its classes and whether
it is the file column. The column headings kept their existing car.services.col*
translations - the keys are mapped rather than derived, because renaming a dozen
strings in three languages to save a lookup table would be the wrong trade. Four
new strings in all three languages.
Verified: go vet and go test ./... pass, with new tests covering both key sets -
that hiding the date is refused, that a field key is not a column key, and that
the arrangeable set is the hideable one plus the date. npm run build is clean.
The page itself was driven in a browser against a throwaway stub API: the
rewritten table renders identically to the hardcoded one, switching two columns
off removed exactly those two from head and body with the rest still aligned and
sent {"hiddenServiceColumns":["oil","engineFilter"]}, dragging Notes onto Km
reordered head and body live and saved an order with the hidden columns still
holding their places, switching Oil back on returned it between Next km and
Cabin air filter rather than to the end, and a read-only share gets no gear
button, no draggable headings and no drag hint.
Not verified: the drag was exercised by dispatching drag events at the
component's own handlers, not by a pointer - the browser pane was not
compositing, which rules out both screenshots and a real drag - so the native
drag image and cursor are unchecked. No automated test guards any of the web
behaviour; the web app still has no test runner. The API rejects unknown JSON
fields, so this web build against an older API Server would take a 400 when
saving the picker: they deploy together from this repo, but one must not ship
without the other. The phone app is deliberately untouched, having no column
table to arrange, and ignores both new fields.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
660af5736a |
Plugins: create the settings collection instead of waiting for it forever
|
||
|
tajniak81andClaude Opus 5
|
9bd5c523c4 |
Plugins: the global layer moves into the database, beside the other two
The integration cascade stored its top layer differently from the two below it: org (L2) and user (L3) plugin config lived in PocketBase, in a pluginSettings field, while the global (L1) layer sat in a plugins.json next to the binary. That split was accretion rather than design - the file was the whole store in the v1 MVP, and the per-tenant layers were later built on PocketBase and layered on top of it instead of replacing it. It also cost something real. plugins.json was a second state store with different durability from pb_data: its own volume, its own ownership, its own backup. Losing pb_data is unmissable; losing api_data was silent, which is how "every plugin comes back disabled after a redeploy" happened. L1 now lives in the app_settings collection - one record keyed "global", holding its settings in a pluginSettings field, the same mechanism and the same field name the layers below use. The documents still differ in shape, because only L1 carries enable state and the registration of external plugins, but the storage is no longer a special case. The Manager grows a Store seam (PocketBase in production, file for the import, memory for tests) and, more importantly, a loaded gate. Settings in a database mean the store can be unreachable at boot - a cold stack, or a service account still to be set from the panel. That must not read as "no plugins configured", or the first save would write emptiness over real settings. So until a read succeeds the Manager stays unloaded, every mutation is refused, /api/admin/plugins* answers 503, and a background retry backs off to two minutes. The same gate covers a document that will not parse: it is never replaced by one built from an empty map, which is a stronger guarantee than the .corrupt backup it replaces. Writing to a store also revealed a hole in the previous fix. Classifying a save failure as errPersist was left to each Store, and a store that returned a plain error would fall through to the "saved, but the plugin failed to start" branch and be reported as a 200 - the same silent-success bug through a different door. The Manager now classifies, whatever the Store returns; a test pins it. Upgrades are automatic: on the first boot that finds no settings in the database, an existing plugins.json is imported and renamed to plugins.json.migrated. The import is refused if the store is merely unreachable, or if the file does not parse, so a stale or broken file can never overwrite live settings. /data is still needed - the panel rewrites .env there when it retargets PocketBase - but plugin settings no longer depend on it. 21 tests in internal/plugins cover both stores, including the production path against a fake PocketBase: create-then-update of the singleton, round-trip across a restart, an outage that leaves settings intact, a missing collection reading as not-ready rather than empty, and the import running exactly once. go build, go vet and go test ./... pass. Schema changes are mirrored into scripts/setup-pocketbase.mjs as that file requires. Not verified: no Docker CLI here, so no image was built and the bootstrap of app_settings against a real PocketBase is untested outside the fake. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
cc1dafa9f7 |
Cars: drag the tabs into order, and a lock for every arrangement
Two things, both about layouts you arrange by dragging.
A car's tab bar now takes a drag: the tabs reorder as the pointer crosses
them and the arrangement saves on drop — or on dragend, since a tab
released in the gap beside the bar never produces a drop and would
otherwise revert on the next load. Same native drag events as the garage
and the Information rows, so also pointer-only, and it needs write access.
The order belongs to the car, like the choice of which tabs show at all,
so everyone it is shared with sees the same bar. It is stored as the full
list of keys, hidden tabs included, so a tab switched off and back on
returns to where it was rather than to the end; a key the stored
arrangement doesn't mention — a tab added in a later release — follows
the arranged ones. Information is arrangeable although it cannot be
switched off, which is why the validation needs arrangeableCarTabs rather
than reusing hideableCarTabs; it is derived from that set so the two
cannot drift as tabs are added. tabOrder rides on the existing PUT
/api/cars/{id}/view, so a tab drag never has to resend what is hidden.
Where the page opens is unchanged: Information, wherever it now sits.
And a padlock in the sidebar, above the theme toggle, holds every
arrangement in the app still at once — the garage, a car's tabs, its
Information rows, the provider's readings. It is a guard against nudging
a layout while reading it, not a permission: it is the user's own setting
and says nothing about what anybody may edit, so locking hides your own
drag handles rather than stopping a co-owner rearranging a shared car.
Stored as dragLocked on the profile, like the theme it sits above, so a
locked account is still locked on the next device — where a folded
provider card stays one browser's reading habit. Unlocked by default, so
nothing changes until it is clicked, and while locked the grab cursor and
the drag hints go with the drag.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
6191160f14 |
Cars: log what charging costs, and drag the provider readings
Three things, all on a car's page. A Charging cost tab, which is the Fuel cost tab written for an electric car: charges in kWh, consumption in kWh/100km beside km per kWh, cost per km and price per kWh, and the same summary panel over the whole history. It keeps the reference-point method too, and has to — a session records the energy that went in, not what was left in the battery, so a given number of kWh only maps to a distance between two charges that ended at the same state. A charge to the car's usual full point plays the part of the full tank; partial charges still count towards the cost and roll into the next full one; and a charge taken without logging it leaves its window uncomputed rather than reporting an implausibly good figure. Sessions live in their own collection, the figures are derived on read like the fuel ones, and logging a charge advances the odometer exactly as a refill does. The tab switches off from the gear like every other, so a petrol car need never see it. The headline readings on the connected-service tab now drag into any order, saved on drop. Stored on the car as metricOrder, like the Information rows, rather than per device the way the collapsed cards are: an arrangement is something everyone the car is shared with should see, where a folded card is one browser's reading habit. Only what the provider reported can be arranged, so a reading that turns up later joins the end rather than displacing the arrangement. Fuel is now Fuel cost, tab and heading, which is what the tab has always been about and what pairs it with Charging cost. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
bc798dae49 |
Cars: drag the Information rows into the order you want
The rows on a car's Information tab now take a drag: they reorder as the
pointer crosses them and the arrangement saves on drop — or on dragend,
since a row released in the gap between rows never produces a drop and
would otherwise revert on the next load. Same native drag events as the
garage, so also pointer-only, and it needs write access.
The order belongs to the car, like the choice of which rows show at all,
so everyone it is shared with sees the same page. It is stored as the
full list of the 14 keys, hidden rows included: a row switched off and
back on returns to where it was rather than to the end. A key the stored
arrangement doesn't mention — a row added in a later release — follows
the arranged ones, the same rule the garage uses for a car added since
the last drag.
fieldOrder rides on the existing PUT /api/cars/{id}/view, which writes
only the lists it is given, so a drag never has to resend what is hidden.
A partial arrangement is accepted; an invented key is still a 400, which
is why normalizeHidden is now normalizeKeys — it validates an order as
well as a switched-off set.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
049da69c83 |
Cars: arrange the garage, and choose what a car's page shows
Three things you can now set up rather than live with.
The garage takes a drag: cards reorder as you drag across them and the
arrangement saves on drop — or on dragend, since a card released in the
gap between cards never produces a drop and would otherwise revert on
the next load. It is a per-user list of car ids on the profile, so it
covers cars shared with you and never reorders anybody else's garage;
the API returns /api/cars in that order, so a client only sends the new
one back. Pointer-only: touch browsers don't fire the native drag
events, and this is not worth a dependency.
A car's page is now configurable from the gear in its header: which tabs
it shows, and which of the 14 Information rows. Both belong to the car,
so everyone it is shared with sees the same page — Fuel off on an EV
stays off for all of them — and setting them needs write access. Stored
as the hidden sets, so anything added in a later release is on by
default. PUT /api/cars/{id}/view is its own endpoint precisely so an
ordinary save of the car form, which sends every other field, can never
reveal something that was deliberately switched off. Information itself
can't be hidden: a page with no tabs left would be a dead end.
The connected-service cards fold away, remembered per device, so a
provider that reports eight sections can be trimmed to the two worth
watching. A failed section keeps a short badge in its collapsed header
and puts the provider's own message — a few hundred characters of JSON,
which used to stretch the page sideways — inside the body with
everything else.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
358ee68f94 |
Cars: create a car from a manufacturer service, with a per-car data tab
A car can now be imported straight from the account its owner already has
with the manufacturer, and every reading that service exposes shows up on
the car's own tab. MyToyota is the first provider.
API Server — internal/api/vehicleproviders.go adds a generic layer over a
plugin that can enumerate vehicles and read data about them. Adding the
next manufacturer is one vehicleSource adapter plus a line in
vehicleSources(): no new endpoints, no Web App changes.
GET /api/vehicle-providers providers + connect state
GET /api/vehicle-providers/{p}/vehicles the caller's vehicles
POST /api/vehicle-providers/{p}/import create a car from one
GET /api/cars/{id}/provider live snapshot for the tab
POST /api/cars/{id}/provider link / unlink a car
POST /api/cars/{id}/provider/sync re-apply provider data
Two properties shape it. Credentials are always the caller's own, resolved
through the same global -> org -> user cascade as the integration settings,
so a shared car shows provider data only when that vehicle is on the
viewer's account — the owner's credentials are never borrowed. And upstream
shapes are not modelled: these are unofficial APIs, so the layer searches
payloads by key name for the readings worth promoting (odometer, fuel,
battery, range) and flattens the rest to dotted key/value pairs alongside
the raw JSON. A renamed field costs one blank value, not a broken page.
The Toyota gate and its wording now live in toyotaSource, so the older
/api/integrations/toyota/vehicles endpoint and the new ones cannot drift.
Manager.InvokeBatchWith shares one transient plugin instance across a batch
of actions. The tab pulls seven capabilities, and InvokeWith builds a fresh
instance per call — which for a connector that authenticates lazily means a
fresh OAuth login per call. Batching logs in once.
cars gains provider + provider_vehicle_id (schema.go and
setup-pocketbase.mjs both). carPayload deliberately omits them, so an
ordinary car edit can neither reassign the car nor break its link;
carProviderPayload writes the link on its own.
Web App — Dashboard grows an "import from service" button beside "add car",
shown only once an account is connected, opening CarImportModal: pick the
vehicle, choose what to pull (identity / fuel type / dates / odometer, all
on by default), import. ProviderPanel becomes the car's first tab, ahead of
Information, labelled with the service: headline readings, the vehicle
record, one card per capability with its raw response, and an offer to take
the provider's odometer when it is ahead of the stored one. On an unlinked
car the tab instead offers to link it, VIN-matched. Info stays the default
selection — landing on the provider tab would fire a login on every car
page view. Full en/pl/da translations.
Tests cover the payload walking, Toyota normalization, import-selection
defaults, and — through the real handler chain against a stand-in
PocketBase — that every route is registered and that a closed gate is soft
on a listing (200 + a reason the UI can show) but hard on a write (4xx, so
a caller cannot read the reply as a created car).
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 4.8
|
30c9cdebe9 |
Add production Docker compose + on-startup PocketBase bootstrap
Introduce registry-pull production stacks (docker-compose.prod.yml) for both the multi-container Docker setup and the all-in-one Docker AIO image, with everything an operator needs (superuser, super-admin, ports, volumes) driven from .env. The API Server now bootstraps PocketBase on startup: a new internal/bootstrap package (Go port of setup-pocketbase.mjs) creates missing collections, reconciles existing ones, and creates the DriverVault super-admin from DRIVERVAULT_SUPERADMIN_* when absent. Idempotent and gated by PB_BOOTSTRAP. The PocketBase superuser is still upserted by the PocketBase container, since the REST API cannot bootstrap the first superuser. Move PocketBase to port 8070 (internal + published) and the web app to 8090 across both stacks, with matching CORS defaults. Co-Authored-By: Claude Opus 4.8 <noreply@anthropic.com> |