f025dc100fa19321c46ab68e9774250aeae41ba8
105
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
 tajniak81andClaude Opus 5
|
f025dc100f |
The local mode, offered by the menu that picks the mode
Modbus TCP has been a working control path since the server learned to dial the charger, and the Charging page has asked for the address it needs — but the Control mode selector never listed it. The mode could be reached only by writing it through the API, which is to say not at all. Both selectors now offer it, and both stop offering what it does not use: the OCPP provisioning card and its "Use this one" button are gated on the modes where the charger dials us, and Modbus gets a line saying where its address is asked for instead. On the phone that gate is more than tidiness — the field is a DropdownButtonFormField, so a mode saved from the web left it holding a value none of its items matched. Strings added in en/da/pl for both apps. The mode hint no longer says control happens "over OCPP", because it no longer always does. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
1aedc0ddc7 |
A serial the account does not list is still a serial worth showing
The dropdown could only show a serial it had an option for. A remembered one the account does not report — a charger imported before the account was linked, one the cloud is quiet about today — selected nothing, so the field sat blank while that serial was the one every command went to. Nothing on screen said which charger was being driven, or let it be corrected. The field now falls back to the text box in that case, the way it already does when the account lists no chargers at all, and shows the serial actually in force. One link switches between picking and typing, so a serial off the list is not a dead end and the list is not the only way in; coming back to it lands on a charger the list holds rather than blanking the dropdown again. Which of the two is showing is decided when the list arrives, not on every keystroke — recomputing it as the serial is typed would turn the text box into a dropdown mid-word, the moment what had been typed happened to match. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
7ccd785742 |
The charger's address, asked for where control is set up
Modbus mode had no way in from the app: the mode could be picked in Settings, but the address the server dials had to be PUT by hand. The control card now asks for it in the place the charger is already being controlled from. Which provisioning the card shows follows the mode, because the two are not alternatives to each other — OCPP installs a token into the charger, Modbus records where the charger is. So does what the card offers: boost is a Modbus command and appears there, clear-limit and reset are OCPP ones the register map has no equivalent for and stay behind. The status tiles read whichever snapshot arrived. An OCPP session counts a meter in Wh and names a connector state; a Modbus snapshot counts the session's own energy and names the charger's. Both land in the same two tiles. When nothing answers, the server has already tried the address and says what it found, so the card shows that rather than a hint written in advance. The hint naming Own and Proxy CSMS as the way to control a charger was true until there was a third mode; it now names all three. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
f7472bada3 |
Reach the charger where it is, instead of waiting for it to call
OCPP asks the charger to dial us: a public endpoint, a TLS certificate, and a route in through the customer's router. Our own handler then demanded two more things the V1 does not offer — TLS on a charger that connects over ws://, and Basic auth credentials the Anker app has no field for — so every connection was turned away before the upgrade. Anker publishes a Modbus TCP register map for this charger, and it inverts the problem: we dial the charger, on its own network, with no inbound reachability to arrange. That works for a charger behind a router that OCPP cannot reach at all. internal/modbus is the protocol, hand-rolled against the spec like the MQTT and WebSocket clients beside it. The plugin's modbus.go is the V1's map: the same 0-8 status enum the cloud already reports, per-phase measurements, and the writable registers behind start, stop, current limit, boost and phase mode. A new "modbus" control mode routes the existing control endpoints down it, so the REST surface, the rate limit, the confirmation step and the audit trail are the ones already there. The commands the register map has no equivalent for say so by name rather than failing as unknown, and a current below the charger's 6 A floor is refused because it pauses the charge rather than slowing it. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
e9a82a1cca |
One hostname a charger can be told about and actually reach
Charger control needs TLS, and the stack speaks plain HTTP, so the README said "terminate TLS in a reverse proxy" and left the operator to work out which four settings have to agree. This adds the proxy: a Caddy overlay that fronts the Web App BFF — which already carries /api/ and /ocpp/ — so browsers and chargers arrive at the same name and the certificate is issued on first boot. The four settings are derived from DV_DOMAIN, since one value getting typed right is better odds than four: OCPP_PUBLIC_URL, OCPP_REQUIRE_TLS back on, CORS, and TRUST_FORWARDED_PROTO on the Web App. That last one is the non-obvious one — without it the BFF overwrites Caddy's X-Forwarded-Proto with its own plaintext hop and the API Server rejects the charger it just told to connect over wss. The README's OCPP section was stale besides: it still sent chargers to the API Server port alone, from before the BFF carried that path. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
9f5c8dc49a |
The address chargers are given is now an address that answers
The API Server tells a charger to dial the host it was itself asked on. The panel asks through the Web App, so the address handed out is the Web App's — which proxied /api/ and nothing else, and answered the WebSocket handshake at /ocpp/ with index.html. A charger pointed at the endpoint the screen showed could never connect to it, and the screen went on saying "Not connected" without a hint as to why. Both front doors now carry /ocpp/ through to the API Server: the BFF via the same reverse proxy, which relays the 101 by hijacking, and the all-in-one image's nginx via a location of its own, with timeouts long enough for a session that is idle between heartbeats. The proxied hop also has to say how the client arrived, since the API Server reads X-Forwarded-Proto to decide a charger reached it over TLS. That header is set from this server's own connection and overwrites whatever came in: believing a client on that point would let a plaintext charger claim wss and walk past OCPP_REQUIRE_TLS. TRUST_FORWARDED_PROTO opts into the inbound value for the one deployment where it is true — TLS ending at a proxy in front of the stack. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
019c28db85 |
The card is about the charger you picked, not all of them
Charger information stacked every imported charger, so the list beside it selected one and the card ignored the choice — with two chargers the page said everything twice and the picking meant nothing. It now shows the selected one alone, and falls back to the first until something is picked: a card that stays blank until clicked is a worse greeting than the charger most people have only one of. The per-block ring goes with it. Highlighting the selection inside a card that shows nothing else is a distinction without a second thing to draw. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
9686cae8b9 |
The charger row asks the same way everything else does
Removing a home charger kept its own inline prompt, written before there was an app-wide one. Two mechanisms for one question is one too many: it now calls askConfirm() like every other destructive action, and the panel, its pending-removal state and the ask/cancel pair go with it. The button still disables while the delete is in flight. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
c9ffb9c698 |
One prompt for the whole app, asked where the browser cannot refuse it
Fifteen destructive actions were still gated behind window.confirm(), the same call that made removing a home charger look broken: a browser that suppresses native dialogs never shows it and returns false, so deleting a service, a part, a user or an organization would quietly not happen and say nothing about why. askConfirm() puts the question in the page and resolves to what was actually pressed, so each call site changed by one line and reads the way it did before. ConfirmDialog is mounted once in App.vue and draws over everything, including a modal — removing a server is asked from inside one, which is what Modal's new zIndex is for. The home charger keeps its own inline prompt: that one belongs to its row rather than to the middle of the screen. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
749f42f481 |
Remove asks in the page, not in a dialog the browser may refuse to show
Removing a charger was gated behind window.confirm(). A browser that suppresses native dialogs — an embedded webview, a blocked-dialogs setting — does not show it and hands back false, so the click answered "no" on the user's behalf: no request, no error, nothing. The button looked broken and the endpoint was never reached. It always had been fine; a delete with an unknown id still answers 404 and the ownership path still resolves. The prompt is part of the row now — the warning, Cancel, Remove — the way the charger reset in the same view already asks. Remove disables while the delete is in flight, and a failure lands in the error line the list already has. Fifteen other confirm() call sites share the flaw and are left for their own change. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
21a54c4cfa |
The bolt in the list takes the colour the badge already had
Every charger in "Your chargers" drew its bolt in the same green, state or no state — the list's one visual signal said nothing. It now takes the green and amber the information card's badges use, off the same live map, so the list answers "which one is up?" without opening anything. A charger the service is silent about draws muted rather than green: a green bolt for an unknown charger is a claim. The icon carries a title as well, so the state is not left to colour alone. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
7cbc81778c |
Every row, every time, dashes included
The information card drew a row only when it had a value, so two chargers side by side had two different shapes and neither could be read against the other — and a field the service is silent about looked the same as a field the card never offers. Every row is drawn now, with a dash where there is nothing to say, which is itself worth seeing. Service id loses the rule that hid it when it matched the serial. Kept, it would have printed a dash for a charger that does have one, and a dash that means "no" where the answer is "the same as above" is worse than the repetition. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
ad785ee9f8 |
The fields the cloud sends, kept all the way to the card
Normalizing a provider's charger list threw most of the answer away: firmware, the site id, how the charger is registered, the charge power and the cloud's own OCPP reading all arrived from Anker and none of them got past providerCharger, which carried seven fields and dropped the rest. The information card could not show what it was never handed. It carries them now, and the card lays them out: firmware beside the model, site and site id where the charger lives, "Registered as" for standalone / in a system / bound, and — when the service knows — state, charge power and OCPP status. Charge power is relayed exactly as worded upstream, since the unit is theirs and putting one on it here would be inventing it. Settings' own list gains the firmware in its subtitle. A field no view supplied still leaves no row, so an account whose chargers stand outside a system reads shorter rather than emptier. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
86ea97b414 |
Online said out loud, not left as the absence of "Offline"
Settings listed a charger's reachability with one badge, drawn only when the cloud said online:false. A reachable charger got nothing — the same nothing a charger the cloud declined to report on gets — so the account's two chargers read as one offline and one unremarkable. Online now has a badge of its own, and the silent case stays silent: not saying is not the same as saying no. The Charging page said nothing at all, having only the record, which knows what a charger is and not whether it is answering. So it asks: each connected service's charger list is read into a live map keyed by the provider's own id, and the information card carries the badge and, when the service reports one, the operating state. Asking costs a round trip per service, so it happens when the home tab is first opened — the moment the question is being asked — and after that only when the user presses Refresh or imports a charger. A service that will not answer leaves its chargers unbadged rather than offline. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
4203ca93db |
What a charger is, readable without a CSMS to control it with
The Home chargers tab put a card where the control panel goes and, with neither Own nor Proxy CSMS turned on, filled it with a single sentence pointing at Settings — an empty box beside a list of two real chargers the app already knew the vendor, model and serial of. That knowledge now has somewhere to be. Charger information lists every imported charger with the fields its record actually holds; a field the service never sent is left out rather than shown as a dash, and the provider's own id appears only when it is something other than the serial. The selected charger carries the same accent ring the list beside it does, so picking one still reads as picking the one control drives. The card stands on its own either way: with control on it sits beneath it, and with control off the Settings hint becomes a footnote under something worth reading instead of the whole card. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
d71c1b4691 |
The panel header stops folding "Sign out" onto two lines
The console shell was capped at max-w-4xl (896px), narrow enough that the header row ran out of room and the last button wrapped mid-word. It now uses the same 1368px cap as the Web App shell, so the header has the space it always assumed it had. Rebuilt the embedded dist to match. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
190ae923a6 |
The Anker token outlives the request that fetched it
The manager builds a throwaway plugin instance for every per-user call —
HealthCheckWith, InvokeWith, InvokeBatchWith each construct, Init, probe and
Shutdown. The auth token lived on that instance, so it died with the HTTP request
that fetched it: opening the Anker panel signed in once for the health probe and
again for the charger list, and a page that also asked for OCPP info signed in a
third time. Every refresh, a fresh login.
Anker throttles passport/login per IP per minute and answers code 26161 ("Failed
to request.") once tripped, so this is the shape of the failure the panel has been
reporting; the cloud has also historically kept one token per account, so each of
those logins could evict the one the mobile app was holding.
Tokens and the login backoff now live in a package-level session keyed by the
account signing in, so every instance configured for that account shares one
login. Re-configuring the same credentials keeps the token; a different account,
or the same account on the other regional server, gets its own session. Sessions
unused for a fortnight are pruned, so an edited password does not leave its entry
behind for the life of the process.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
c1aee0fac1 |
One refused sign-in, not five: the chargers poll no longer locks the account
A chargers poll asks four cloud views. Each called apiRequest, each found no token, and each ran its own login — so a login Anker refuses was offered four times in one poll, and the next poll spent the fifth. Five is what disables the account for ten minutes, which is how "code 26161: Failed to request." turned into "your account has been disabled" on the very next attempt. The plugin now remembers a refused login instead of repeating it: the failure is cached and replayed to every caller until a backoff window passes — a minute at first, doubling to fifteen, or the full ten minutes when Anker says it has already locked the account (code 10019). New credentials clear it, so a fixed password is tried at once. chargerInventory signs in once up front. A login the cloud refuses is not four views failing, so it is reported as itself rather than as three warnings with the lockout notice buried in the last one. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
423bc2ab16 |
The charger list sorted by a field the collection never had
Opening Home chargers answered {"status":400,"message":"Something went wrong
while processing your request."} — PocketBase's generic refusal, here for an
unknown sort field. home_chargers declares its own fields and nothing else:
PocketBase adds no created field to a collection defined through the API, which
is exactly why control_audit and organizations declare theirs. The list handler
sorted by created anyway. It was the only handler in the server that sorts by
created — every other one sorts by name, km or date, fields their collections
actually declare — so the gap had never had a chance to show.
The field is now declared, and reconcile adds it to the collection already
standing on the next boot, since home_chargers is in reconcileOrder. Import order
is the only order a charger has: it carries no date of its own, and a wallbox
bolted to a wall does not accumulate events the way a car does.
The list also stops depending on that. A rejected sort now falls back to the
unsorted query rather than failing the request: the order is a nicety, the list
is not, and an owner reading a database error about a field they cannot see is
the worst of both. It also makes the deploy order stop mattering — the page works
before the bootstrap has run, and the sorted query wins once it has.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
06f91578da |
Integrations, sorted into the categories the panel already sorts them into
The API Server panel has grouped plugins by category since the plugin list was drawn — car manufacturers, EV chargers, notifications, each tab carrying its count. The Settings page had the same integrations in one flat stack, so the two screens described the same set of things in two different shapes. Now they agree: the same categories, the same counted tabs, the same accent border on the active one. The category ids come from the Category* constants both sides already read, so nothing here invents a third vocabulary. Only a category holding something gets a tab, which is the panel's rule too: two tabs today rather than six empty ones. Below one category the bar hides itself entirely — with nothing to switch between, a single tab is a label pretending to be a control. The active group falls back to the first rather than to a fixed id, because the three integration views load independently and a tab can be momentarily empty on first paint; falling back keeps the section populated instead of blanking it. The cards moved into a space-y-4 wrapper and lost their per-card mt-4, so the first card sits the same distance under the bar whichever tab is showing — previously Toyota was the only one that could ever be first. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
a3f69fa5ef |
Home chargers: your own wallbox as a record, imported the way a car is
The Home chargers tab has been showing a hardcoded "Home charger · 11 kW · NACS" since it was drawn, and the control card asked for a serial as free text — a number printed on a box hanging in a garage, typed in by hand while the connected account already knew it. The garage solved the same problem for cars a while ago, so this is that solution aimed at the wall: pick the charger off a service you have connected, press Import, and it becomes a record of yours. A charger is a record rather than a live listing because it has to outlive the account it came from. Disconnect Anker and the wallbox is still on the wall; the integration is how the charger was found, not what it is. Hence home_chargers, owned by a person and not related to any car — it charges whichever car is plugged into it, and it outlives all of them — and hence no sharing: a charger is one household's business in a way a car shared with a partner is not. The provider layer is vehicleproviders.go's shape on purpose, down to the soft gate: a listing answers 200 with an empty list and the sentence that says what to do about a closed gate, a write answers 400, because there the caller asked for something that did not happen. Anker and Greencell are two adapters over plugins that already exist, so the next charger service is an adapter appended to chargerSources() and nothing else. What is deliberately absent is the car import's checkbox panel: a charger is a name, a serial and the hardware behind it, all of which the list already carries, so there is nothing to choose and the whole screen is pick one, press Import. Only the name is editable afterwards. The rest describes hardware and came from the service, and the provider link is written by the import endpoint alone, so renaming a charger cannot quietly orphan it from the account it tracks. Deleting one says as much in its confirmation: the charger is untouched, and importing it again brings the record straight back. The Anker gate moved into ankerGate() beside greencellGate(), because the same four-case switch was about to exist in a third place. Behaviour is unchanged — the same sentences, and the probe still skips the personal opt-in, since checking credentials is what you do before switching the integration on. The phone app still has the old tab; parity there is a separate change. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
a809980d8b |
Anker health: count the chargers the panel lists, not the ones one endpoint admits to
The probe still asked get_user_bind_and_not_in_station_evchargers and read its userBindEvChargersCount, so it reported "0 EV charger(s) bound to account" for an account whose two chargers the panel was listing directly underneath — the same blind spot the capability was just moved off, left behind in the health check. It now takes the same inventory the chargers capability returns and counts that. Authenticated with nothing on the account is degraded rather than ok, following Greencell's rule: the half we address answers, and the empty half is the account or the country that picks the regional server, so the message says so instead of reporting a healthy connection to nothing. A count reached with some view missing says how many views stayed silent, because the number is then a floor rather than a total. The web panel colours degraded amber, as it already did for Greencell. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
e138fad3f4 |
Anker: every charger on the account, not just the ones outside a station
get_user_bind_and_not_in_station_evchargers is the only list the connector ever asked for, and its name says exactly what it withholds. A charger that belongs to a system is not in it. Its userBindEvChargersCount, though, counts every charger bound to the account — so an owner with two chargers in a system got "authenticated; 2 EV charger(s) bound to account" from the health probe and an empty list from the capability that is supposed to show them. A working login that finds nothing. So the capability now asks every view the cloud has and merges them by serial. The standalone list still answers for chargers standing on their own; get_site_list walks the systems and reads each one through get_scen_info, falling back to get_system_running_info where that is silent — the power-service / HES split charger-state already knows; and get_relate_and_bind_devices contributes model, firmware and the Wi-Fi flag, and discovers anything in the A519 family that the first two missed. Whichever way a charger was registered, one of the three has it. The merge is first-writer-wins per field rather than last view overwriting: the standalone record knows the name, the site record knows the live state, and neither should blank what the other established. A view that fails is a warning on the document instead of an error on the call, because one dead endpoint should not cost the chargers the other two found. Only losing all three is a failure. When nothing comes back at all the response says so in its own words and names the remaining suspect — country picks the regional server, and the wrong one authenticates happily and shows an empty account. The other half of "not showing any chargers" was that neither client ever showed a list. The serial was a text box, and the number is printed on a charger hanging on a wall. Both apps now list what the account holds — name, serial, model, site, state, an offline badge — and hand the serial to the OCPP control card instead of asking anyone to go and read it. Where control is off the list still stands on its own, as the answer to the first question an owner has after entering credentials. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
a7cab50e06 |
Apprise: a gateway to hand a message to, not a hundred protocols to carry
Apprise is a Python library that speaks 100+ notification services behind one URL grammar — mailto://, tgram://, ntfy://, discord://. None of that is portable to a server that takes no dependencies, and none of it needs to be: caronc/apprise-api wraps the library in HTTP and is meant to run as a container beside us. So the connector carries no notification protocols of its own. It posts a body to an endpoint the operator runs and lets Apprise fan it out, which is also why adding a service later costs nothing here. Targets are addressed one of two ways and configKey is the switch. Stateful means the URLs live on the Apprise server under a key, narrowed by a tag expression, and recipients are then edited there — no credential for any downstream service is ever held in DriverVault. Stateless means the URLs travel with the request, from a secret config field, which is simpler for one destination and worse for ten. A call that names its own key or urls takes that destination alone rather than merging with the configured one: honouring a caller's URLs while still falling back to the configured key would deliver the message somewhere nobody asked for. baseUrl is Required, which no other connector's address is. Toyota, Anker and Greencell leave everything blank at the global layer because the superadmin → org → user cascade exists to fill it in, and a blank there means "let the user choose". There is no cascade behind this one — a notification gateway is infrastructure the operator runs, not an account a driver owns — so nothing further down can supply the address, and a blank is simply a plugin that cannot work. Better to fail at enable than at the first notification nobody sees. Three limits are choices rather than gaps. /add and /del are not implemented: the Apprise config belongs to the operator, we post to it, and a connector that can delete a notification config has a wider blast radius than one that can only send through it. privacy=1 is forced on /json/urls rather than offered as a parameter, so a target listing reads mailto://user:****@host and downstream tokens stay on the Apprise side of the wire. Attachments are remote URLs the Apprise server fetches; multipart upload is the API's own path for files and not ours. Health follows the rule Greencell set. A reachable server whose config holds nothing to notify is degraded, not down: the half we address works and the missing half is the operator's config. Two cases earn their own line — a config key set against a server running with stateful mode disabled can never resolve, and /status answers 417 rather than 500 when Apprise finds a problem with itself, so that is a parsed answer and not a transport failure. A proxy that strips our Accept header gets the same codes back as plain text, which is read rather than called unreadable; an HTML error page from something that is not Apprise is not, and a test pins the difference. Notifications needed a category of their own, and that is the one change outside the plugin: the constant, the tab order in PluginsCard.vue, and the label in all three panel languages. The cost is now written down in the plugins README beside the Descriptor example, since the previous five categories predate anyone having to add a sixth. The plugin's tests run against an apprise-api stand-in built from that project's views.py — both notify paths, the override rules, 204-as-empty against 424-as-failure, and every health branch. builtin_test.go is the other half: the blank-import list in builtin.go is a silent failure mode, since a connector left out of it compiles, passes its own tests, and never appears in the panel. What is not covered is a live instance; there is no Docker on this machine, so the wire contract comes from reading upstream's source rather than from running it, and a smoke test against a real deployment is still worth doing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
a49d48f659 |
The panel's webfonts, in the one position CSS accepts them
The lockup was the visible symptom and the wrong suspect. Matching it to the Web App's component changed nothing a reader would notice, because the panel was not rendering Archivo at all — it was rendering system-ui's italic bold, which is a different letterform at the same size, and had been since the stylesheet was written. The Google Fonts @import sat after @import "tailwindcss". Tailwind v4 inlines its import into the rules it generates, so anything importing after it is no longer at the top of the sheet, and CSS drops an @import that follows real rules. The built stylesheet carried zero occurrences of fonts.googleapis.com; the build had been saying so on every run, in a warning easy to read as noise about a comment. Moving the font import above Tailwind's is the whole fix, and the Web App's own stylesheet has always had that order with a comment explaining it — that comment comes across, plus what it cost here. This was never only the wordmark. Every rule reaching for --font-sans or --font-mono was falling back too, which is the entire panel: the section nav, the card titles, and the endpoint tables whose monospace is how a path reads as a path. Checked against the built bundle rather than the dev server, since the dev pipeline is exactly what was hiding it: the page now reports Archivo italic 800 loaded, and the wordmark measures 115.05px — the same width the Web App's rail lockup measures. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
e648634ce1 |
The plugin list, grouped by what a plugin actually is
Category has been in the plugin contract since it was written — apis-external, drives-external, drives-local — and every builtin declared the same one, so it grouped nothing. Two of the three talk to a wallbox and one talks to a car manufacturer, and those are different questions an operator arrives with: the Toyota card is where a driver's account gets linked, the Anker and Greencell cards are where a charger's broker and credentials live. So vehicles and chargers join the constants and the three builtins say which they are. The panel groups on that field rather than on a list of names, which is what keeps an external plugin from needing panel code. Tab order mirrors the constants; a category with nothing in it gets no tab, and a single group hides the bar entirely, so an install with one connector looks exactly as it did. A category the panel does not recognise — or an empty one — falls to the external-APIs tab rather than vanishing, because a plugin nobody can see is a plugin nobody can disable. The selected tab falls back to the first group when its own goes away, which is what removing the last external plugin does. Registration still asks only for name, base URL and provider, so a plugin registered at runtime lands under Other APIs until its manifest names a category. That path already works and is the honest default: the panel is guessing about a service it has never spoken to, and the service can say. The header lockup is the other half. It was a copy of the Web App's mark rather than the same mark, and copies drift — a 32px icon against 28, a 24px wordmark against 21.6, "Driver" at text-strong instead of white, "Vault" a step lighter than brand-400. The Web App's Logo.vue moves in verbatim, props included. The one thing it cannot inherit is which variant to render: the Web App's rail is always dark, while this panel flips with its own theme toggle, so on-dark is bound to the theme and the hand-rolled bar fills that existed to survive that flip are gone. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
340a81b0d6 |
Greencell: the charger on your own broker, not a cloud it never had
The HabuDen has no cloud API to connect to. It is commissioned over Bluetooth in
the Greencell GC app, pointed at an MQTT broker the owner runs, and from then on
publishes there — so the connector is an MQTT client rather than an HTTP one,
and nothing in it reaches Greencell. The wire contract is Home Assistant's own
greencell component and the greencell_client 1.0.3 library beneath it, which is
the only published description of the topics: a BROADCAST on /greencell/broadcast
draws device announcements, and /greencell/evse/{sn}/ carries current in
milliamps, voltage, power under "momentary", the EVSE state, and the access level
chosen in the app.
That meant an MQTT client, and the server takes no dependencies, so internal/mqtt
is hand-rolled the way internal/ocpp's RFC 6455 layer is. It is scoped to what
this connector needs and says so: QoS 0 for everything we send, clean session,
no reconnect — a connection lives for one plugin call, which is exactly how the
manager builds and tears down an instance. Inbound PUBLISH is accepted at QoS 0,
1 and 2 with the acknowledgements each requires, because the QoS of a delivery is
the broker's choice and not ours; an unacknowledged QoS 1 is redelivered forever.
Read-only, and the reason is worth writing down rather than rediscovering. A
device in EXECUTE mode accepts START, STOP, SET_CURRENT and QUERY — but the topic
those go to appears in no source: not Greencell's integration page, not
greencell_client, and Home Assistant ships sensor-only for that same reason.
Publishing to a guessed topic would be a control feature whose failure mode is a
driver believing they stopped a charge. So the access level is reported, and
commandTopic is the seam: an operator who has watched their own broker and found
theirs sets it, and a state read then sends QUERY — the one command a READ-mode
device also honours — instead of waiting out the charger's publish cadence. The
day the topic is public, control is a payload away from the same field.
What the cascade resolves here is a broker, not an account, so host, port, TLS and
credentials resolve together from the highest layer that names a host: an
organization's address paired with a user's password would address a broker with
credentials never meant for it. The serial, the QUERY topic and the listen window
each describe the charger rather than the endpoint, so each resolves on its own.
Two reading rules the tests pin. A phase the device did not report stays nil
rather than zero, because zero amps on a charger is a real measurement — a JSON
null decoding to 0.0 was a live bug until a test caught it — and a partial read
returns with received/complete flags instead of failing, since a device that
publishes some topics on a slower cadence is still worth reading. And a reachable
broker with no charger on it is degraded, not down: the half we configure works
and the missing half is the device. The plugin's end-to-end tests run against an
in-process broker written to the raw wire format, so a bug in the client cannot
hide behind a matching bug in the fixture.
The apps get the third connector card. The panel needed nothing — it renders a
plugin's ConfigFields itself — but the per-user panes are still hand-written per
integration, which is now three near-copies and the argument for the generic
version already noted in the plugins README. The web form splits the broker from
the charger because the server resolves them differently. The phone card is a
declarative config against the shared widget, which gained a number field type, a
degraded state that reads amber rather than red, and a fix for a locked field
that was covering its own displayed value with dots. Twenty keys in three
languages across both apps; Greencell, HabuDen and the literal QUERY join the
proper nouns that stay in English.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
5e6b8b4b1c |
Anker Solix: the charger's mode, and the modes it can be moved into
The connector was written against anker-solix-api v3.7.0 and upstream is at 3.8.1 now. The reassuring half of the check first: nothing we depend on moved. The passport/login ECDH exchange, the headers, and every endpoint path this plugin calls are identical across v3.7.0...v3.8.1 — the only apitypes movement touching an EV charger was get_device_rfid_cards being reordered within its own dict. The 400 new lines in charger.py are the A2345 USB charger, which shares a filename with our device and nothing else. What did land for the V1 is two entries in the release notes, and both are MQTT: 3.8.0 gave standalone chargers the usage-mode entity they were missing, 3.8.1 added a switch that reads those modes as a plain on/off so EVCC and its like have a binary to hold. We control chargers over OCPP, not MQTT, so the command path is not ours to port. The reading of state underneath it is, and that half does come over the cloud. So charger-state. The status code arrives under two different names depending on which system family a site belongs to — operating_state inside a scene's charging_pile_list, evChargerStatus inside HES system running info — and upstream's poller quietly renames both to ev_charger_status on ingest, which is the tell that they are the same number. We ask both and merge, because a site answering only one of them is the normal case rather than a fault; the call fails only when neither view is there. chargerMode and chargerModeOptions then follow ev_charger_mode_state and ev_charger_mode_options as written, including the rule that a stopped charger is startable only from standby, and the binary is the same one 3.8.1 chose: everything that is not stop_charge counts as on. The gap worth naming is that the boost flag and the plug and start countdowns reach upstream over MQTT and never over the cloud, so three of the six modes cannot occur here. That is not a bug to be found later — chargerMode takes them as parameters and the callers pass their zero values, so the day an MQTT source exists the derivation is already correct and only its inputs change. The package doc says so in the scope list beside the other limits. Five endpoints upstream has had all along and we never exposed come with it, all EV-charger-scoped: the site scene, energy_analysis under device_type ev_charger, a charger's RFID cards, Anker's own OCPP endpoint list, and one vehicle's details. charger-status takes the featuretype it was hardcoding at 1, since upstream's exporter asks for both 1 and 2 and there was never a reason for us to see only half. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
fd75833707 |
The cabin's temperature, and the one it is heading for
The climate cards landed with the endpoint migration, but only as two more folded dumps of key/value pairs. What a driver opens that tab for in January is one number, and it was three taps down inside a card called Climate. So currentTemperature and targetTemperature join the headline readings, beside the pair of electric ranges and for the same stated reason: neither figure answers the question on its own. A cabin at 12° means nothing until you know it is climbing towards 21°, and the gap between them is how long to leave the scraper in the boot. Being derived from headlineMetricSpecs, both are arrangeable the moment they exist — a car's saved order of readings can name them without anything else being told they are there, and a test now says so rather than leaving it to be noticed when a PATCH starts rejecting a key. The unit is fixed at Celsius, because Toyota Connected is the European service and there is no imperial reading to convert from. That is a default and not a claim: a payload that names its own unit is still believed over it, the way every other reading here works, so a service that one day reports Fahrenheit is labelled Fahrenheit rather than relabelled into a wrong Celsius. The two apps needed the two labels in three languages each and nothing else. That is the shape working: a section is an id the app localizes and a reading is a key it localizes, so a card added on the server arrives in both clients already folded, already arrangeable, already translated. The one thing the Web App did need was a corrected comment — the note explaining why cards fold still said Toyota reports eight sections, and it is the argument for folding them, so it should count the ten there now are. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
22a22ec43a |
Toyota: the status route the car answers, not the one it retired
Toyota put the /v1/global/remote read routes behind AWS SigV4 in mid-2026. A bearer token is no longer a credential there, so the doors-and-windows card has been asking a gateway that answers 403 — the one section of the provider tab that could only ever have been in error. The MyToyota app reads that state from /v1/vehicle/status now and pytoyoda followed it in 5.2.0; so does the connector. The electric route did not move, and the comment above the endpoint block says which of the two namespaces each one lives in, because the obvious tidy — sweep the rest onto /v1/vehicle/* — would break the ones that still work. The same migration gave the climate reads a home worth porting: /v1/vehicle/ climate-status is what the cabin is doing, climate-settings the preset it was told to do it at. Both are GETs with a vin, both are new cards on the tab, and their headings are in all three languages on both apps. Nothing about the tab's plumbing changed to hold them — a section is an id, an action, and whatever JSON comes back, which is the point of that shape. Left where they are: the POST wake calls. Upstream refreshes a stale reading by waking the modem, and this connector is documented as read-only, so climate and status show what the car last reported rather than what it would say if asked twice. The cost is a reading that can be hours old, and it is the honest one to pay for a connector that promises not to touch the vehicle. Two tests keep the migration from being undone by hand: one fails if any advertised capability points back at a retired route, the other if a capability is advertised without being wired into Invoke, which is the way the next endpoint would go missing. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
a203414ceb |
Phone App: the garage on the car's own screen
The one place a service badge is worth reading is the car it belongs to, and that is the one place the app could not be opened: Android Auto runs no Flutter engine, so a Flutter app is simply absent from the head unit. The same APK now carries a second face — Car App Library templates the host draws itself, in Kotlin under android/app/src/main/kotlin/com/drivervault/phoneapp/car/. Two screens. The garage lists a car per row with its due badge on the second line, worst first, because the host renders only the first handful of rows and the car this list exists to mention is the overdue one rather than whichever was added first. A tap opens what that car has coming: the odometer, the next service, and the reminders the server holds for it — typed in and auto-derived from documents and the service schedule alike, in the order it sorted them. None of it is a second implementation of the app. VaultStore reads the session the phone signed in with — the active server's base and token — out of shared_preferences' own store, which both halves share, so a server switched on the phone is the server the car reads from with nothing to keep in step; only cc_active_base is new, because an untouched home entry carries no address of its own, its base being kDefaultApiBase, a compile-time define nothing outside Dart can see. CarStrings reads the same assets/i18n files by the same dot paths, so a badge on the head unit is the string format.dart already puts on the phone, in the language the account chose: of the 32 keys the car screens ask for, 28 are keys a phone screen already used, and only carApp.* is theirs. CarFormat is format.dart's twin — same date pattern and number grouping from the account's settings, same worst-of-date-and-km service badge. A new test reads the Kotlin for the keys it looks up and fails if any is missing from a language file, since the analyzer's reach stops at the Dart. It only reads. A screen you cannot type into is a poor place to edit a car and a driver is a poor person to ask, so VaultApi has no write in it to reach for by accident. Three things the README now says out loud. The service is declared IOT, the closest category the library defines for something that is a garage rather than a map or a media player, which matters to a store submission and not to a sideload. The app lock does not reach the head unit: the flag is in memory and the credentials behind it in encrypted storage, neither readable from the car service, and there is no fingerprint reader in a dashboard to satisfy it with. And the home charger is not on there — the chargers endpoint relays its plugin's payload verbatim with no shape to read, and the serial the control card is driven by is never persisted, so the car would have nothing to name. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
fa569c4030 |
Sign in before the first call, not after a 401 that never comes
Logging in failed on both the Web App and the Phone App with PocketBase's
{"data":{},"message":"The requested resource wasn't found.","status":404}.
The login itself succeeded; the profile fetch right after it — GET /api/me
— was what 404ed, and the web app renders the relayed body on the login
form, so it read as a rejected sign-in.
PocketBase answers a record read it will not allow with 404 rather than
401: it hides the record instead of refusing the credentials. The pb
client only re-authenticated on a 401, so with no cached token the first
request went out carrying no Authorization header at all, came back 404,
and the retry never fired. Nothing ever tried again — the server kept
404ing long after PocketBase was healthy.
The cache is empty in exactly the two cases that matter: a startup where
the up-front Authenticate failed because PocketBase wasn't up yet, which
main.go treats as non-fatal on purpose so a superadmin can still log in
and fix the connection; and a Reconfigure from the panel, which clears
the token so the new credentials get used.
So acquire the token before the first attempt rather than hoping for a
401 to prompt it, across all four superuser paths. Bad credentials now
surface as the authentication failure they are instead of masquerading
as a missing record. With no service account configured there is nothing
to acquire and the call proceeds as before, since the endpoints that need
superuser access already answer 503 on their own.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
12ec10a797 |
Phone App: more than one server, and a session for each
The web app can be pointed at two DriverVault stacks and switch between them in a click. The phone had one address and one session: reaching a second garage meant retyping the API base in Server settings and signing in again, losing the first server's token on the way — the same act, undone, every time you switched back. So lib/servers.dart is the web's servers.js ported rather than reinvented, down to the storage keys: cc_servers holds the list, cc_active_server the one being read, cc_session_<id> the token minted by that server and no other. The two apps describe the same thing the same way, and the upgrade path falls out of it — cc_token, cc_user and cc_server_url are read once at boot and folded onto the home entry, so the build carrying this signs nobody out. Home is the address the build ships with (kDefaultApiBase, still overridable per device from the login screen) and cannot be removed: it is what a dropped session falls back to. Any other server is added by address, with /api appended if the path is left off, because a server a phone can reach is internet-facing already. The part worth reading twice is which session a rejection ends. ApiClient no longer holds a base or a token — it pins the active server's id, base and token at the moment a request goes out, so a 401 arriving after a switch clears the session of the server that actually refused it rather than whichever one is active by then. The fallback is the web's: a remote server timing out drops its own token, the app returns to home while home is still signed in, and only when nothing is left to fall back to does the login screen come back. Log out still clears every server at once, since leaving the app means leaving all of them. Switching rebuilds the shell, keyed on the active id, because record ids belong to the server that issued them — a garage, a charging page and a settings panel still holding the other server's rows would each have to be told to forget them separately. The appearance prefs come across with the profile of whoever owns the account on the server now active. Where the picker lives is the one place the phone cannot copy the web. There is no app rail here, so it became the first button in the Garage header, beside the theme toggle and log out, which is that same cluster. It names the active server once there is a choice and goes straight to adding the second when there isn't; the eyebrow reads GARAGE · Work for the reason the rail names it — two garages otherwise look identical. The login screen gets its own way in, because a remote session can expire and land you there with that server still active, and a picker reachable only from inside the app would leave nowhere to go. One judgment call inside the sheet: saving a connected server at a new address saves and stops, rather than falling through to the sign-in it now needs. The token was minted by the PocketBase behind the old address and is dropped with it, but the credentials to replace it were never asked for, so treating the save as a login would report an empty password as the error. The strings are copied out of Web App/web/src/i18n/ like the rest of the shared wording. Two are not the web's: home reads "the address this app ships with" rather than "served with this app", since the phone has no origin to be served from, and sameOrigin has no meaning here at all and was dropped. Biometric sign-in stays global. It was never per-server and replays its stored credentials against whichever server is active; making it per-server is a change of its own, and the login screen now names the server it is about to sign into. Nothing changes on the API Server. On Android there is no origin to allow, so the CORS list the web app has to satisfy to reach a second server doesn't enter into it. Verified: flutter analyze is clean and flutter test passes, 35 tests to 46. The new ones cover the registry — a bare origin gaining its /api, a fresh install knowing one unnamed server on the built-in address, the legacy keys landing on home and being cleared, two servers holding their tokens apart, a rename keeping a session where a move drops it, removing the active server falling back to a home that is still signed in, home refusing to be removed, and a restart reading the list, the active id and every session back. Not verified: none of it has been run. There is no device or emulator on this machine and no API Server to answer, so the picker, the add sheet, a real connect, the 401 fallback and the shell rebuild on a switch exist only as code the analyzer is happy with — the tests reach the registry, not a screen. No APK was built. The legacy migration was exercised against mocked SharedPreferences, which is not a phone that had the old build on it: that is the first thing to check on a device, since the failure mode is a silent sign-out. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
35e6c511b7 |
Changed parts: the list is the car's, not the app's
The Changed parts section offered all three parts to every car. An EV changes no
oil, and a checkbox nobody will ever tick is one more thing to read past on every
service — so which parts a car records now belongs to the car, the same way its
tabs, its Information rows and its Service history columns already do.
It works the way those three do because a fourth mechanism for the same idea
would be a fourth to keep in step: hidden_service_parts on the car, validated by
the endpoint that already does this, stored as the hidden set so a part added in
a later release is on by default, and needing write access because the choice
belongs to the car and everyone it is shared with sees it.
There is no order beside it, which is the one place this departs from the other
three. Those arrange things whose position means something — a tab bar reads left
to right, a table's columns are read across. The parts are a checkbox list inside
a single column, and moving Cabin air filter above Oil says nothing. Adding one
later is the same shape as the others if that turns out to be wrong.
A part switched off leaves the form and the history together — the chips on the
phone's cards, the web column's summary and the panel it opens. "I don't record
this" means it stops taking up room, not that it takes up room saying nothing,
which is the rule a hidden column already follows. That is the judgment call
here: a car with five years of oil changes hides them all by switching the part
off. Nothing is written to the records, so switching it back on brings every one
of those chips back, which is what makes the call safe to reverse.
The part that would have been a silent data bug: the API rewrites all three
booleans from the body of a service update, so a form that simply stopped
sending a hidden part would set it false on the next edit of any old record.
Both forms therefore keep every part in their state and submit every one — only
the checkboxes are filtered. The mirror of that is a *new* record, where a hidden
part starts false rather than at its `initial`, since ticking a box nobody was
shown is not a default, it's a guess. Oil is the only part with initial: true, so
that case is live the moment anyone hides it.
Verified: go vet and go test ./... pass, with a new test covering that every part
is hideable (unlike the tabs and the columns — a service that changed nothing is
a real service), that the "parts" column key is refused as a part key and a part
key as a column key, and that no part is also a column. flutter analyze is clean
and flutter test passes 32 to 35, the new ones covering visibleParts, that a
hidden part's chips go while its stored boolean stays, and the picker's fourth
section. npm run build is clean.
Both apps were driven against throwaway stub APIs. Web: the picker saved
{"hiddenServiceParts":["oil"]}, the table's parts cell went from "Oil & Oil
filter +2" to "Engine air filter, Cabin air filter", the record whose only part
was oil went to an empty cell, the panel dropped to two rows, the add form
offered two unticked boxes where oil's initial: true would have ticked one, and
editing the three-part record sent changedOil:true back with a box that was never
on screen. Phone: the same car rendered chips "Engine air, Cabin air", "Changed
parts —" for the oil-only record, and an add sheet with exactly two unticked
boxes.
Not verified: no automated test guards the web behaviour — the web app still has
no test runner, so the above was read out of the live DOM and the outgoing
request bodies by hand. The phone's picker was checked by widget test and by
rendering, but its Save was not driven end to end. Neither app was run against
the real API Server: bootstrap appends the new field on the next start, and until
that start a client sending hiddenServiceParts takes a 400 — they deploy together
from this repo, but the server must go first.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
7718b32013 |
Phone App: off the plugins that bring their own Kotlin
flutter build apk warned that file_picker and shared_preferences_android apply the Kotlin Gradle Plugin themselves, and that a future Flutter will refuse to build an app whose plugins do. Both have versions that let Flutter's built-in Kotlin do it instead; neither of them is a version bump on its own. shared_preferences_android was free — 2.4.27 is inside the constraint that was already there and only pub.lock was holding it back. file_picker is not: 10 and 11 both apply KGP, so 12 is the floor, and 12 split into federated packages whose windows one wants win32 ^6, which flutter_secure_storage 9 forbids. So the fix reaches flutter_secure_storage, and that is the part worth reading twice. v11 satisfies win32 but its changelog is explicit: data written by a version before v10 is unusable after it, because v10 is what migrates the Jetpack Security (EncryptedSharedPreferences) backend Google deprecated to the package's own ciphers. Going 9 to 11 in one step would leave the stored credentials unreadable and quietly switch biometric login off for anyone who had it on. v10 satisfies win32 ^6 just as well, so the constraint is pinned below 11 with the reason written down: once a build carrying v10 has run on every device that had biometric login enabled, the ceiling can go. encryptedSharedPreferences: true goes with it — v10 ignores the parameter and migrates on first access, and v11 has removed it. file_picker 12's API is smaller and the call sites got smaller with it. FilePicker.platform.pickFiles returning a result whose files list had to be checked for emptiness becomes FilePicker.pickFile returning one nullable file, which is what both callers wanted. PlatformFile.bytes (populated only when withData was asked for) becomes readAsBytes(), so the "bytes, or read the path, or give up" ladder both callers carried is one await — and the give-up branch that raised errors.noFile and the import's notJson is gone, because a file that was picked can now always be read. Verified: flutter analyze is clean and flutter test still passes 32. flutter build apk --debug succeeds and prints no KGP warning, where the build before this named both plugins. Not verified: nothing was exercised on a device — the phone came off USB before the reinstall, so this APK has not run. The two things to try first are the ones that changed under the picker: attach a PDF to a service record, and Settings, data, import a previously exported JSON. Biometric login is the third — it should survive, since v10 migrates rather than resets, but a device that had it on is the only place that claim can be checked, and if the migration does fail the app treats it as stale credentials and asks for the password. Android is the only target built; the win32 bump underneath is untested because this app has no windows/ folder to build. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
6b7abb4b84 |
Phone App: a service card laid out by the car's own columns
The Service history columns became a property of the car two commits ago, and
the phone was left out of it on the grounds that it has no table to arrange.
But the arrangement is not the table's — it belongs to the car, and everyone it
is shared with sees it. A reader who switched Oil off on the web still had it
on every card here, which makes the setting look broken rather than absent.
A card is not a table, so the columns cannot be cells. Consecutive short ones
share a wrapping line, which flows left to right and then down and so keeps the
arrangement intact; the parts, the notes and the file each take a line of their
own. That means the grouping follows the car's order rather than the
catalogue's — move Notes between Km and Next date and the short columns split
around it — which is the part a hand-written card gets wrong by collecting the
short columns first and appending the blocks after them, quietly undoing the
arrangement it was asked to honour. serviceColumnRuns is a function for exactly
that reason: it is the piece worth a test.
The date carries no heading where every other column does. A card list is read
down its dates, and "Date" in front of one says nothing the date doesn't — the
same judgment the server makes by refusing to hide it. It is offered in the
picker anyway, ticked and locked, because a row missing from that list is a row
nothing on this screen can drag; the web drags the column headings themselves,
which on a touch screen is the scroll's gesture. A column that is on but empty
says so ("Notes —") rather than vanishing: it was switched on deliberately, and
a card that silently drops it reads as a record that failed to load.
Changed parts arrives with it. Every part shares the one column — they are a
growing list and a column apiece would widen the web's table without end — and
lib/service_parts.dart is the twin of the web's lib/serviceParts.js, so the
form's checkboxes and the card's chips come from one list and adding a part is
one entry plus its boolean on service_records. The chips keep their own shorter
wording; the form keeps the web's, which is what stops the two apps naming the
same part differently.
Verified: flutter analyze is clean and flutter test passes, 22 tests to 32 —
the new ones cover that the arrangeable set is the hideable one plus the date,
that a field key is not a column key, that adding a part adds no column, the
run grouping, and a widget test of the picker showing the date's is the only
locked checkbox. The screen itself was driven against a throwaway stub API: a
default car renders date, Km, Next date, Next km, chips, notes and file in that
order, and a car hiding km and file with the order [notes, date, nextKm, parts,
km, nextDate] rendered exactly that — notes first, both hidden columns gone, the
short columns split around the chips. updateCarView round-trips both new fields
under the names records.go decodes.
Not verified: the picker's own Save button — the tap landed in the harness but
the request never reached the stub, which reads as the fire-and-forget future
being cut off at teardown, since the same call made directly worked. Drag was
exercised through the reorder callback, not by a finger. Nothing here needs the
API Server to change: both fields already ship, and a phone running against an
older one simply reads empty lists and shows every column.
Two commits needed nothing: the web's masked date box answers <input
type="date"> rendering in the browser's locale, which a picker-only field
cannot have, and the garage card's width answers a badge that wrapped, which
this badge cannot. car.services.next goes, its prose replaced by the columns
that now say it.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
f7caeaf907 |
A date typed in the order you chose, not the browser's
Settings › Date format steered every date the app printed, but not one it asked for: `<input type="date">` renders in the browser's own locale and no page setting can move it, so DD-MM-YYYY tables sat above 08/22/2026 boxes. DateField takes over the typing half — a masked box whose segment order comes from the same prefs.dateFormat lib/format.js reads — and leaves the picking half to the browser, behind a calendar button. The value in and out stays ISO, so no caller changed. Native validation now also catches a full-but-impossible date; the old input let a half-typed one through as no date at all. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
d4033dbcef |
A build date you may only half know; one look for an empty cell
Two changes, both about showing what is actually known rather than a tidier version of it. The build date asked for a day. A car's build date is often only a year, or a month and a year - the VIN plate is stamped with a month, the papers carry a day, a grey import neither - so a field insisting on all three is answered either with an invented day or with nothing, and both throw away what the owner did know. The field now picks its own precision: a full date, a month and year, or a year, each with the control that suits it. A year is typed rather than picked, because a date picker that makes you walk back to 1998 is worse than four keystrokes. Stored as the ISO prefix - "2015", "2015-03", "2015-03-10" - which is ISO 8601 reduced precision, and printed back at exactly that precision. The three shapes sort and compare as strings in date order, which is why the prefix is stored rather than a date with a precision field beside it. The formatter takes the string apart rather than parsing it: "2015-03" read as a UTC instant and printed in local time hands back February west of Greenwich. Narrowing the precision keeps what is still true, so a day dropped from "2015-03-10" leaves "2015-03". Widening clears the field. That is the awkward half of the control and it is deliberate: there is nothing to widen a year with, and leaving "2015" behind an empty month box would store a date the screen is not showing. The column was free text with no validation at all, which was tolerable while only a date picker could write it and is not now that three shapes are legal. normalizeBuildDate parses rather than pattern-matches, so "2015-13" and "2015-02-31" are refused instead of stored as something no reader can print. The phone needed changing to avoid destroying this. It parsed buildDate with DateTime.tryParse, which returns null for "2015" - so a half-known date would have shown as a dash, and saving the car from the phone would have written "" back over it. It holds both date fields as the string they arrived as now, prints them at their own precision, and hands back anything it cannot set. Its picker still only makes full dates; a precision control there is a separate job. Separately: an empty cell of the service table had three different looks in one row. The dash under Notes was body-coloured, as though it were content; the one under File was 12px, having borrowed the size of the Download button that would otherwise be there; the one under Changed parts was muted at 14px. They are one constant now, muted at the row's own size, which is what Next date and Next km already did for a missing value. The Download link keeps its own styling - it is an action, not a value. Verified in a browser: a stored "2015-03" loads as month precision in a month picker, month to year narrows to "2015", year to day clears, "19x98abc" typed into the year box sanitises to "1998", saving sends buildDate:"1998" and the Information tab then reads "1998" - while a full first-registration date beside it still reads 06-08-2026. All five empty cells across the three columns now compute to the same size, colour and weight, with the filled ones unchanged. go vet and go test ./... pass with a new test over the three valid shapes and six rejects; flutter analyze is clean and 22 tests pass, one new, covering a half-known date in two date formats and the time zone that could shift it; npm run build is clean. Not verified: First registration still demands a full date. The same argument applies to it and the field is now a reusable component, but it was not asked for and is one line away. The web formatter's month-name paths - the DMY and MDY formats, which spell the month out - are covered only by the phone's mirror of the logic, the web app still having no test runner. A car created through the Toyota import bypasses the new validation; it only ever produces full dates, so nothing invalid gets in that way, but it is not guarded. Both apps need redeploying before any of this is visible. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
c5d431c560 |
Changed parts: one column in the service table, not one each
Oil & Oil filter, Engine air filter and Cabin air filter had a column of Yes/No
each in the Service history table, 375px of the 1022px table between them for
three bits of information. The form has always kept them together in one Changed
parts section, which is the honest shape: they are one answer to one question
about a service, not three unrelated readings. The table said otherwise, and the
list is going to grow - every part added would have taken another column and
pushed the table into a sideways scroll.
They are one column now, 234px with the widest summary on screen, and its width
no longer depends on how many parts exist. The cell names what was changed
rather than counting it, because a history is read down the page and "2" tells
you nothing about which two; past two names it becomes the first part and a
tally, which is what keeps one line one line as the list grows. Nothing changed
reads as an em dash.
The detail is a dropdown, not a dialog. This is read-only detail about one row
of a table you are reading down: a modal would black out the rows being compared
against and charge an open-and-close for each one. It is pinned under the button
it was opened from, closes on an outside click, Escape or a scroll - it is fixed
to a point on the screen, so a table that moves underneath would leave it
pointing at the wrong row - and there is one panel rather than one per row. It
lists every part with a Yes or a No, the unchanged ones included, so the em-dash
row still answers the question instead of being a dead cell.
One list in lib/serviceParts.js now drives the form's checkboxes, the cell's
summary and the panel. That is the point of the change as much as the width is:
adding a part was three edits that had to agree, and is now one entry plus its
boolean on the API's service_records collection. The form builds its state and
its payload from the list rather than naming the three fields twice - the save
payload is unchanged in shape, which was checked against the wire rather than by
reading it.
This walks back part of the previous commit, which had just made all three
hideable separately: the server's column set drops oil/engineFilter/cabinFilter
for a single "parts" key, and a test now asserts those three are not columns of
their own, so the table cannot drift back. A car with ["oil"] stored as hidden
would quietly get the combined column - nothing has that stored, the deployed
stack predating the feature, and stale keys are dropped on read rather than
erroring.
Verified in a browser against a stub API: all four summary cases (one part
named, two named, three as "Oil & Oil filter +2", none as an em dash); the panel
opens anchored under its button with the right Yes/No for the row, stays inside
the window, and closes on outside click, Escape, scroll and a second click,
switching rows without leaving a second panel behind; the picker offers "Changed
parts" as one entry and hiding it sends {"hiddenServiceColumns":["parts"]};
dragging sends "parts" in the order with the hidden column holding its slot; the
Edit dialog renders from the shared list and its PATCH still carries all three
booleans with the unticked one false. go vet, go test ./... and npm run build
are clean.
Not verified: no automated test covers any of it - the web app still has no test
runner, so the cases above were driven by hand. The drag and the panel were
exercised through dispatched events rather than a pointer, the browser pane not
compositing, so the native drag image and the panel's behaviour under a real
click-and-hold are unchecked. The dropdown overlaps the rows beneath it, which
is what a dropdown does but was not weighed against a taller table. The deployed
Web App still shows three columns until it is redeployed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
b60d929ed6 |
Service history: columns you can switch off and rearrange
A car's page has let you choose and arrange two things for a while - which tabs
it shows, and which rows the Information tab lists, both dragged into whatever
order you like. The Service history table was left out of that: nine columns,
hardcoded, in one order, for every car. An EV shows Oil & Oil filter and Engine
air filter on every row of a history that will never record either, and a reader
who mostly wants Notes has to look past four columns of dates and distances to
reach it.
It works the way the other two do, because a third mechanism for the same idea
would be one to keep in step. Both lists are properties of the car, so everyone
it is shared with sees the same table, and both need write access to set. The
columns are stored as the hidden set rather than the visible one, so a column
added in a later release is on by default. The arrangement covers the hidden
columns too, which is what makes a column switched back on return to where it
was instead of reappearing at the end - verified below, since that is the part
of this shape that is easy to get wrong and invisible until somebody hits it.
Date cannot be switched off. Every row of that table is work done on a day, and
a history with the day taken out stops being a history; it can still be dragged
anywhere, which is exactly the rule Information already follows in the tab bar.
That is a judgment call and the annotation that prompted this only circled the
other eight columns - moving "date" into hideableServiceColumns and dropping the
filter in the picker would reverse it in two lines if it turns out to be wrong.
Server: hidden_service_columns and service_column_order on the car, validated
against their own key sets by the endpoint that already does this for tabs,
fields and readings. The arrangeable set is derived from the hideable one plus
the date rather than written out again, so the two cannot drift as columns are
added. Bootstrap appends missing fields to existing collections, so the two
columns appear on the next server start with no migration to run.
Web: the table stopped being nine hardcoded th/td pairs and is now driven by one
list of columns, head and body from the same source, which is what stops a moved
or hidden column from shifting the headings out of line with the cells. The
cells are built a row at a time rather than a call per cell, so a long history
doesn't rebuild every cell three times to read its text, its classes and whether
it is the file column. The column headings kept their existing car.services.col*
translations - the keys are mapped rather than derived, because renaming a dozen
strings in three languages to save a lookup table would be the wrong trade. Four
new strings in all three languages.
Verified: go vet and go test ./... pass, with new tests covering both key sets -
that hiding the date is refused, that a field key is not a column key, and that
the arrangeable set is the hideable one plus the date. npm run build is clean.
The page itself was driven in a browser against a throwaway stub API: the
rewritten table renders identically to the hardcoded one, switching two columns
off removed exactly those two from head and body with the rest still aligned and
sent {"hiddenServiceColumns":["oil","engineFilter"]}, dragging Notes onto Km
reordered head and body live and saved an order with the hidden columns still
holding their places, switching Oil back on returned it between Next km and
Cabin air filter rather than to the end, and a read-only share gets no gear
button, no draggable headings and no drag hint.
Not verified: the drag was exercised by dispatching drag events at the
component's own handlers, not by a pointer - the browser pane was not
compositing, which rules out both screenshots and a real drag - so the native
drag image and cursor are unchecked. No automated test guards any of the web
behaviour; the web app still has no test runner. The API rejects unknown JSON
fields, so this web build against an older API Server would take a 400 when
saving the picker: they deploy together from this repo, but one must not ship
without the other. The phone app is deliberately untouched, having no column
table to arrange, and ignores both new fields.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
caf4d2996d |
A garage card wide enough for the badge it carries
The service badge gained a second trigger in the last commit, so it now reads "OK · 353d · 13.612 km" where it used to read "OK · 353d". On the garage card there was nowhere to put the extra quantity. Three columns fit the 1024px shell at 328px each, and at that width the badge wrapped with the unit alone on a second line - a pill 44px tall reading "13.612" above "km" - while the name beside it truncated to "Toyota bZ4X To...". The card had been sized for the badge that used to be there. The column count now follows from the width a card needs rather than from breakpoints: an auto-fill track with a 24rem minimum, which the 1024px shell answers with two columns of 502px. A desktop garage is therefore 2-up where it was 3-up. That is the honest answer at this container width - the third column was what squeezed both the name and the badge - and it is the change here most worth disagreeing with, since it is visible on every garage and not only on the cars with two triggers. min(24rem,100%) keeps a phone, narrower than one track, on a single column rather than overflowing it. The badge also stops wrapping outright. Its label is a phrase whose parts have to stay together, and separating a number from its unit is the one break it must not take. The name beside it truncates instead, which it was already prepared to do - so on a phone, where a card is 271px, the badge stays whole and the name gives way. Verified in a browser against the real card: 328 -> 502px, the badge 44px over two lines -> 24px on one, "Toyota bZ4X To..." -> "Toyota bZ4X Touring" in full, and at 375px one column, no sideways scroll, badge still on a single line. npm run build is clean and the compiled CSS carries both rules. Not verified: no automated test covers this - the web app has no test runner, so the widths above were measured by hand. The layout was checked with one car on the screen; a garage of several was not, though the change is to the track rather than to the card. The deployed Web App still serves the previous build and will keep showing three narrow cards until it is redeployed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
e5759df52c |
Say how far the next service is, not only how long
The service badge has always watched two triggers - the next-due date and the next-due odometer reading - and shown one of them. It ranked the two and printed the worse one's sentence, so a car comfortable on both read "OK · 354d" and never said that the odometer target was 13.612 km away, even though the Information card right under it prints the 15.000 km the badge is counting towards. Whichever trigger arrives first ends the interval, so naming only one of them describes half the thing. Both are named now. With both signals known the label is a severity headline followed by each trigger as a bare quantity - "OK · 354d · 13.612 km", "Due in 12d · 13.612 km" - which is the shape reminderStatus in the same file already uses, it having had the two-trigger problem first. The signals gained the number behind their own wording to make that possible; they were returning only a formatted sentence. Wording is unchanged wherever only one signal has data, which is the case this rewrite most risked disturbing: a car with no odometer target still reads "OK · 354d" exactly as before, one with no service date still reads "13.612 km left", and neither still reads "No data". The new keys are only reached when there are genuinely two numbers to print. An overdue badge lists only the triggers that have actually passed. "Service Overdue 30d · 13.612 km" would read as overdue by 13.612 km, which is the opposite of what that number means, so the trigger that is still comfortable stays out of a sentence headed "Overdue". It costs the remaining distance on a date-overdue badge; the alternative costs the reader's trust in the number. The phone carried a line-for-line copy of this logic and gets the same treatment rather than being left a version behind - the two would otherwise disagree about the same car on the same day. Its signals become a private record type, since Status is public and shared with the expiry, reminder and warranty badges that have no second trigger and no use for the field. Two new keys (status.okIn, status.serviceOverdueBy) in all three languages in both apps. The day and km fragments they interpolate were already translated for the reminder badge, so the parts assemble in Polish and Danish without new wording: "OK · 354 dni · 13 612 km", "OK · 354 d · 13.612 km", each with its own grouping separator. Verified by flutter analyze (clean), flutter test - 21 pass, including the key-parity test that would have caught a key added in English alone - and npm run build for the web. The web function was driven through the real module in a browser over ten cases: both signals known at each severity, each of the two overdue alone, both overdue together, either signal missing, neither, and a zero-odometer car, in all three languages. Not verified: no new automated test covers this. The web app has no test runner and the phone's format tests cover the catalogue lookups rather than the badge, so the ten cases above were checked by hand and are not guarded against the next edit. The deployed Web App still serves the previous build and will keep reading "OK · 354d" until it is redeployed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
b4e99240c6 |
API panel: document the whole REST surface, not half of it
The API section's tables are hand-maintained and carry a comment saying they
mirror the routes in server.go. They had stopped: 60 rows against 141 routes,
so 81 endpoints were reachable and undocumented. Everything added since the
tables were written is in that gap - technical checks, fuel, charging,
maintenance, documents, reminders, attachments, the vehicle-provider and
integration surfaces, and the OCPP socket - along with the per-car
sub-resources (fuel-stats, charging-stats, the provider routes) and
PUT /api/cars/{id}/view. Ten new groups, 60 rows to 123, and nothing listed
that no longer exists.
Checked by extracting every mux.Handle route from server.go and diffing it
against every row in the tables rather than by reading both lists: the seven
attachmentRoutes calls expand to their 21 concrete routes, the three static
panel paths are excluded, and the diff is empty in both directions. That
script is not committed - it is a one-off, and a real guard belongs in the Go
tests where it can see the mux, which is worth doing if these tables drift
again.
The flat list endpoints require ?car={id} - they refuse a cross-car listing
so access can be enforced - so the ones that do now say it. Attachments are
documented once with {records} standing for the seven collections that take a
file, because all seven behave identically and seven copies of three rows
would bury that. EndpointTable grew an optional note line under the header to
say what {records} means.
Two things fixed while in there. PUT rendered uncolored - methodClass has had
no PUT entry since the superadmin group started using it - and the longest
paths, the per-charger OCPP control routes, overran the card and were clipped
by its overflow-hidden rather than scrolling; the table sits in an
overflow-x-auto wrapper now. Thirteen of the eighteen tables scroll at phone
width, four of them before this commit's rows were added.
Group titles are translated in all three languages, plus one new auth label
for the OCPP socket, which authenticates the charger with OCPP Basic auth
rather than a bearer token. The endpoint descriptions stay English:
TRANSLATIONS.md calls them developer reference documentation, and this commit
does not reopen that.
Verified by go build ./... and go vet ./internal/api, and by driving the
panel in a browser against a mock API Server standing in for the real one -
all eighteen tables render, the {records} note and the PUT color show, the
Polish titles resolve, and no table clips at 375px. dist is rebuilt so the
embedded panel matches the source.
Not verified: nothing ran against a live API Server, so the descriptions are
checked against the handlers' code and comments rather than against
responses. The mock only answers /api/identity and /api/status, which is
enough to get past the login gate and reach the section.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
a25b31842d |
Round the connected service's readings; keep sheet buttons off the nav bar
Both found by driving the installed app on a phone rather than by reading the code, which is worth noting: the second one is invisible in a simulator with gesture navigation turned off. The bZ4X's tab showed "Electric range (A/C on) 99.744 km" beside "Electric range (A/C off) 103.9 km". The long number is a reading converted out of miles: headlineMetrics multiplied by 1.609344 and printed whatever came out, so a range estimate claimed to know the distance to the metre, and the two readings disagreed about their own precision on the same card. Distances now keep one decimal and percentages none, applied by the reading's kind rather than by whether it was converted - a provider reporting 99.744 km natively gets the same treatment. Anything else is left alone, because without knowing what it measures there is no safe place to cut. The odometer already rounded to a whole number on its own path; this only changes the headline readings. The Add-user sheet's "Create user" button sat underneath the system navigation bar. Every one of these sheets padded its bottom with viewInsets.bottom, which is the keyboard - correct while typing and wrong the rest of the time, because with the keyboard down that inset is zero and the navigation bar is still there. They take the larger of the keyboard and the navigation bar now, since a raised keyboard covers the bar and the two must not be added. One helper on DriverVault rather than the same expression in six files, which is how the six drifted into being identical and identically wrong. Verified: go build, go vet and go test ./... pass, with a new test covering the conversion (62 mi reads 99.8 km), a native over-precise reading, a percentage, and the odometer's whole number surviving. flutter analyze clean, 21 tests pass, and the rebuilt release APK was installed on the phone - the Create user button now sits clear of the navigation bar, where the screenshot that prompted this showed it clipped. Not verified: the rounding is not visible on the phone yet. It talks to a deployed API Server that has not been rebuilt from this commit, so that tab will keep reading 99.744 until the server is redeployed. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
dc6febf815 |
Phone App: finish the admin screen; translate the last English strings
Three loose ends from the last two commits, each of which was named as deliberately-not-done and none of which is worth carrying further. The phone's create-user sheet had no organization picker. The endpoint has taken an `organization` since orgs existed and the Web App has offered the choice all along, so a superadmin on the phone could only ever create accounts in their own org - a silent restriction rather than a stated one. The sheet now loads the orgs and offers them to a superadmin, with the same blank "no organization" option and the same hint as the web. An admin still gets no picker, because the server forces its own org on their members and a picker that cannot change the outcome is a lie. The listing is manager-only and can fail, in which case the picker offers only "no organization" rather than blocking the form. A locked role picker or delete action was greyed out with no reason given. The web has explained itself in a title attribute since those guards existed, and the sentences - admin.cantChangeOwnRole and the rest - have been sitting translated in the phone's own language files since the screen was translated. Hover has no touch equivalent, so the two controls take different routes: a long-press on the role picker shows the reason as a tooltip, and the overflow menu carries it under the action, because a disabled menu item cannot be long-pressed and silently greying it out is the thing being fixed. settings.integrations.* and charging.control.* were English-only in *both* apps - 70 keys, identical text, identical key sets - so they are translated once and land in all four language files. OCPP and CSMS are protocol names and stay; product names (Toyota Connected, MyToyota, Anker Solix, Lexus) stay; everything else follows the wording already in each language's file. The Web App's files are edited as text rather than round-tripped through a JSON dump, because they keep a blank line before every nested block and a dump flattens it - a 900-line translation file is hard enough to read without losing its paragraphs. Both diffs are purely additive as a result. Both apps now have every key in all three languages: 738 in the web, and the phone reports zero fallbacks. A new test locks that in - every key en.json carries must exist in pl.json and da.json - and it was checked by deleting a key and watching it fail, because a guard that cannot fire is not a guard. Verified by flutter analyze (clean), flutter test - 21 pass, 1 of them new - flutter build apk --debug, and npm run build for the Web App. The key checker reports 575 static t() keys in the phone and 738 in the web resolving with no fallbacks in either language. Not verified: still nothing run against a live API Server or on a device. In particular the organization picker's happy path - a superadmin creating an account into a chosen org - has not been exercised end to end; it is the one piece here that touches the API rather than only the language files. Co-Authored-By: Claude Opus 5 <noreply@anthropic.com> |
||
|
tajniak81andClaude Opus 5
|
4372b870ac |
Phone App: take the admin users screen off hardcoded English
The last screen the phone rendered in English regardless of the language
picker. Its strings are the web AdminUsers.vue's, which have been translated
since
|
||
|
tajniak81andClaude Opus 5
|
a2d9efec7e |
Phone App: take the car screen off hardcoded English
The previous commit left the car screen half translated: its tab labels went
through t(), and everything underneath them did not. A Polish user opening a
car got translated tabs over English tiles, English forms and English
dialogs, which is worse than either extreme because it reads as a bug rather
than as a missing translation.
So the whole screen and everything it opens now reads from the language
files: the record tiles, the share and delete-car dialogs, the service and
part sheets it hosts, record_form_sheets.dart, car_form_sheet.dart, and the
attachment field whose buttons surface inside all of them.
Almost none of these strings are new. The Web App has said all of this in
three languages since
|
||
|
tajniak81andClaude Opus 5
|
e249c2f4d8 |
Phone App: connected service, charging cost, a tab picker and data export
Both READMEs claimed web parity with data export/import as the only
omission. That was three gaps out of date: the car screen had no
connected-service tab, no per-car charging-cost tab, and no way to say what
a car's page shows - all three of which the web has had since the car view
became a property of the car rather than of the browser.
The tab bar was the thing blocking the rest. It was a fixed list of eight
Tab(text: "Information") literals, so it could neither grow a tab nor read
an arrangement, and it sat outside the translation system that the rest of
the app has used since
|
||
|
tajniak81andClaude Opus 5
|
215c027ada |
Panel: give the API Server a name, and a tab to set it in
The Web App can be pointed at more than one DriverVault, but a server it
adds is only ever identified by the URL that was typed into the connect
dialog. Nothing on the other end says what it is called, so the switcher
has no name to show that the operator did not invent locally.
So the server now carries one. SERVER_NAME joins the config, defaulting to
"DriverVault API Server" so /api/health always has something a client can
display rather than an empty string every caller has to special-case.
GET/PUT /api/admin/server-config follow the pb-config and webapp-config
shape exactly: superadmin only, applied at runtime and then persisted to
.env, with the same "applied but could not be saved" warning when the write
fails. There is no /test sibling, because a name is a label and not an
address - there is nothing to probe. The length cap counts runes rather
than bytes, so a 64-character Polish or Danish name is not cut off at the
halfway mark.
/api/health reports it, unauthenticated, which is the point of the whole
change: a client adding this server by URL can label it from the probe it
already makes, instead of needing a second and authenticated call before it
can draw the entry.
In the panel it is a new API Server tab, first in the superadmin group
since it is this server itself, ahead of the PocketBase and Web App tabs
that describe what it talks to. Strings in all three languages, and the
route table in the README and the API reference tab both grow the two new
endpoints.
Known gap, deliberately not closed here: the compose files do not pass
SERVER_NAME, so under Docker a rename from the panel writes the container's
.env and no volume keeps it - it reverts to the default the next time the
container is recreated. Wiring it as ${SERVER_NAME:-} would make the host
.env authoritative, at the cost of the other trap the previous commit
documented, where the environment silently overrides the panel on every
restart. That is a call about the deployment, not about this endpoint.
Verified by new tests over the handler: the rename applies at runtime,
lands in .env, reaches /api/health, is rejected without touching .env when
blank or over-long, and accepts a name of exactly the limit in multi-byte
runes. go build, go vet and go test ./... pass. Drove the built panel in a
browser against a stub backend - the tab renders, loads the current name,
saves, and reads correctly in Polish - and ran the rebuilt api-server.exe
and webapp.exe end to end, confirming the embedded bundle really contains
the new tab and that SERVER_NAME reaches /api/health through both the
server itself and the Web App's proxy.
Not verified: no Docker build, so the images still serve the old panel
until they are rebuilt and pushed.
Co-Authored-By: Claude Opus 5 <noreply@anthropic.com>
|
||
|
tajniak81andClaude Opus 5
|
9258532952 |
Docker: give the panel's settings screens a permanent home in .env
|